Construction of Residential Doctors and Interns Hostel Building at Government Medical College Latur Tq and District Latur

Amount

PART – A (Work Portion)

i) Civil Work

ITEM No. 1 :- Clearing grass and removal of rubbish up to a distance of 50 metres outside the periphery of the area.

ITEM No. 2 :- Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material with all lifts and leads beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etcetera complete.

ITEM No. 3 :- Excavation for foundation in hard murum including removing the excavated material with all lifts and leads beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etcetera complete.

ITEM No. 4 :- Excavation for foundation in hard murum and boulders including removing the excavated material with all lifts and leads beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etcetera complete.

ITEM No. 5 :- Excavation for foundation in Soft rock and old cement or lime masonry foundations including removing the excavated material with all lifts and leads beyond the building area and stacking as directed, including dewatering, preparing the bed for the foundation and necessary back filling with available earth / murum, ramming, watering including shoring and strutting etcetera complete.

ITEM No. 6 :- Conveying materials obtained from road cutting including all lifts, laying in layers of 20 centimetre to 30 centimetre breaking clods, dressing to the required lines, curves, grades and section, watering and compacting to not less than 97% of standard proctor density for a lead of 300 metre to 500 metre inclusive, from the site of excavation to the site of deposition as directed.

ITEM No. 7 :- Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) by treating the bottom surface and sides of excavation at the rate of 5 litres of emulsion concentrate of 1.0 percent of chlorophyrifos per square meter of surface area covering 10 years guarantee on bond paper. (Material including all lead and lifts)

ITEM No. 8 :- Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, laying / pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etcetera complete. With natural sand / V.S.I. quality Artificial Sand. (Material including all lead and lifts)

ITEM No. 9 :- Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap / granite / quartzite / gneiss metal for reinforced cement concrete work in foundations like raft, strip foundations, grillage and footings of reinforced cement concrete columns and steel stanchions etcetera including bailing out water, formwork, cover blocks, laying / pumping, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etcetera complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etcetera complete. With natural sand / V.S.I. quality Artificial Sand. (Material including all lead and lifts)

ITEM No. 10 :- Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap / granite /quartzite/ gneiss metal for reinforced cement concrete columns as per detailed designs and drawings or as directed including centering, formwork, cover blocks compacting and roughening if special finish is to be provided and curing etcetera complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etcetera complete. With natural sand/V.S.I. quality Artificial Sand. (Material including all lead and lifts)

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

E) Fourth Floor

ITEM No. 11 :- Providing and laying Cast in situ / Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for reinforced cement concrete beams and lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks, laying / pumping, compaction and roughening the surface if special finish is to be provided and curing etcetera complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etcetera complete. With natural sand / V.S.I. quality Artificial Sand. (Material including all lead and lifts)

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

E) Fourth Floor

ITEM No. 12 :- Providing and laying Cast in situ / Ready Mix cement concrete M-25 of trap/ granite / quartzite / gneiss metal for reinforced cement concrete slabs and landings as per detailed designs and drawings including centering, formwork, cover blocks, compaction, finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etcetera complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etcetera complete. With natural sand / V.S.I. quality Artificial Sand. (Material including all lead and lifts)

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

E) Fourth Floor

ITEM No. 13 :- Providing and laying Cast in situ / Ready Mixcement concrete M-25 of trap/ granite/ quartzite / gneiss metal for reinforced cement concrete chajja as per detailed design and drawings including centering, formwork, cover blocks, laying / pumping, compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etcetera complete. With natural sand / V.S.I. quality Artificial Sand. (Material including all lead and lifts)

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

E) Fourth Floor

ITEM No. 14 :- Providing and laying Cast in situ / Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for reinforced cement concrete pardi of required thickness including centering, formwork, cover blocks, laying / pumping, compacting and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer / concrete Batch mix plant (Pan mixer) etcetera complete. With natural sand/V.S.I. quality Artificial Sand. (Material including all lead and lifts)

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

E) Fourth Floor

ITEM No. 15 :- Providing and laying Cast in situ / Ready Mix cement concrete in M-25 of trap / quartzite / granite / gneiss metal for reinforced cement concrete Waist slab, and steps of staircases as per detailed design and drawings or as directed including steel centering, plywood/ steel formwork, steel props, laying/pumping, compaction, finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etcetera complete. (Excluding reinforcement, including cover block). (Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etcetera) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etcetera complete. With natural sand / V.S.I. quality Artificial Sand. (Material including all lead and lifts)

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

E) Fourth Floor

ITEM No. 16 :- Providing and laying Cast in situ / Ready Mix cement concrete in M-25 of trap / granite /gneiss / quartzite metal for reinforced cement concrete fins of required thickness in position as shown on the drawings or as directed by Engineer-in-charge including steel centering, plywood / steel formwork, steel props, laying / pumping, compaction, finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etcetera complete. (Excluding reinforcement, including cover block) Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etcetera with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etcetera complete. With natural sand / V.S.I. quality Artificial Sand. (Material including all lead and lifts)

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

E) Fourth Floor

ITEM No. 17 :- Providing and laying Cast in situ / Ready Mix cement concrete in M-20 of trap/ granite/ quartzite/ gneiss metal for reinforced cement concrete coping to plinth or parapet and sill of doors and windows moulded as per detailed drawings or chamfered as approved by the Engineer including centering, formwork, cover blocks, laying/pumping, compacting, curing, finishing and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etcetera complete. With natural sand / V.S.I. quality Artificial Sand. (Material including all lead and lifts)

A) Ground Floor

ITEM No. 18 :- Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for reinforced cement concrete pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etcetera as per detailed designs, drawings and schedules including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. (Material including all lead and lifts)

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

E) Fourth Floor

ITEM No. 19 :- Providing expansion joints in reinforced cement concrete framed structure (exterior column) with plain premoulded filler 25 millimetre thick with 75 millimetre wide and 1 millimetre thick stainless steel plate and finishing etcetera complete. (Material including all lead and lifts)

ITEM No. 20 :- Providing expansion joints in reinforced cement concrete framed structure (at floor level) with plain premoulded filler 25 millimetre thick with 75 millimetre wide and 1 millimetre thick stainless steel plat and finishing etcetera complete. (Material including all lead and lifts)

ITEM No. 21 :- Providing expansion joints in reinforced cement concrete framed structure (at Terrace level) with premoulded filler 25 millimetre thick with 40 millimetre wide and 1 millimetre thick stainless steel plate as required, bitumen poured filler and finishing etcetera complete as directed. (Material including all lead and lifts)

ITEM No. 22 :- Providing and fixing during laying in RCC Slab rectangular 2 millimetre thick Mild steel sheet fan hook box of size 180 X 100 millimetre with required depth with holes or notches as required, bottom and top sides of 1.6 millimetre mild steel sheet fixed with 3.5 millimetre diameter round headed screws together with 12 millimetre diameter mild steel bar bent to shape with hooked ends for fan hook and painting to exposed surface. (Material including all lead and lifts)

ITEM No. 23 :- Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) treatment by treating the backfill in immediate contact with foundation at the rate of 5 litres of emulsion concentrate of 1.0 percent of clorophyrifos per square metre of vertical surface area covering 10 years guarantee on bond paper. (Material including all lead and lifts)

ITEM No. 24 :- Filling in plinth and floors with approved excavated material in 15 centimetre to 20 centimetre layers including watering and compacting etcetera complete.

ITEM No. 25 :- Filling in plinth and floors with contractors material / brought from outside and approved by Engineer in charge in layers of 15 centimetre to 20 centimetre including watering and compaction etcetera complete. (Material including all lead and lifts)

ITEM No. 26 :- Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) by treating the top surface of plinth filling at the rate of 5 litres of emulsion concentrate at 1.0 percent of clorophyrifos per square metre of surface area covering ten years guarantee on bond paper. (Material including all lead and lifts)

ITEM No. 27 :- Providing soling using 80 millimetre size trap metal in 15 centimetre layer including filling voids with Crushed sand /grit, ramming, watering etcetera complete. (Material including all lead and lifts)

ITEM No. 28 :- Providing fly ash brick masonry with conventional / I.S. type fly ash bricks in C.M. 1:6 in foundation and plinth including bailing out water manually striking joints, racking out joints watering and scaffolding etcetera complete. (Material including all lead and lifts)

ITEM No. 29 :- Providing fly ash brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etcetera complete. (Material including all lead and lifts)

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

E) Fourth Floor

ITEM No. 30 :- Providing Second class fly ash brick masonry with conventional / I.S. type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of two bars of 6 millimetre diameter / two hoop iron strips 25 millimetre X 1.60 millimetre at every third course, properly bent and bounded at ends scaffolding raking out joints and watering etcetera complete. (Material including all lead and lifts)

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

E) Fourth Floor

ITEM No. 31 :- Providing and fixing Mild Steel grill door 24 kilogram per square metre of various size as per detailed drawings without hot dip coating, iron fixtures and fastenings and 3 coats of oil painting etcetera. (Material including all lead and lifts)

A) Ground Floor

B) Fourth Floor

ITEM No. 32 :- Providing and fixing mild steel grill work for windows, ventilators etcetera 20 kilogram per square metre as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete. (Material including all lead and lifts)

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

E) Fourth Floor

ITEM No. 33 :- Providing and fixing chicken mesh of 22 gauge, with about 30 centimetre width at the junction of reinforced cement concrete members and brick work, of approved quality including fixing mesh in position by necessary drilling in concrete or burnt brick masonry and or tying by binding wire etcetera complete. (Material including all lead and lifts)

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

E) Fourth Floor

ITEM No. 34 :- Providing internal cement plaster 12 millimetre thick in single coat in cement mortar 1:5 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etcetera complete. (Material including all lead and lifts)

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

E) Fourth Floor

ITEM No. 35 :- Providing and applying gypsum plaster ( with Gypsum material of Gypsum India / Mega Sign or equivalent make ) with finishing with gypsum material in 10 to 13 millimeter thickness to previously plastered surface / or on newly brick surface (Excluding rough cast plaster) in all position including preparing and Finishing the surface scaffolding etcetera complete. (Material including all lead and lifts)

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

ITEM No. 36 :- Providing neeru finish to plastered surfaces in all positions including scaffolding and curing etcetera complete. (Material including all lead and lifts)

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

E) Fourth Floor

ITEM No. 37 :- Providing internal cement plaster 20 millimetre thick in two coats in cement mortar 1:3 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etcetera complete. (Material including all lead and lifts)

ITEM No. 38 :- Providing fine cement finish 1.5 millimetre thick over green plaster surface including scaffolding curing etcetera complete. (Material including all lead and lifts)

ITEM No. 39 :- Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 millimetre thick in cement mortar 1:4 using waterproofing compound at 1 kilogram per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 millimetre thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etcetera complete. (Material including all lead and lifts)

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

E) Fourth Floor

ITEM No. 40 :- Providing and applying Texture plaster with finishing with PurliDeleted / Rustic texture material (with texture material of Asian / Renava / Nitco/Temtex or equivalent company make) in 3 to 4 millimeter thickness on previously finished plastered surface, including Plaster Groove 6millimetre thickness or Tape Grooves 35 to 45 millimetre thickness or as required, in all position including preparing the surface scaffolding etcetera complete. (Material including all lead and lifts)

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

E) Fourth Floor

ITEM No. 41 :- Labour charges for providing groove in external plaster having width and spaced as directed by Engineer in charge etcetera complete.

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

E) Fourth Floor

ITEM No. 42 :- Providing waterproofing in W.C. and bath including brick bat coba in all position including providing and laying 12 millimetre bedding in cement mortor 1:3 on vergin concrete slab with waterproofing compound at the rate of 1 kilogram for per bag of cement laying brick bat coba of required thickness in cement mortar 1:5 with waterproofing compound 1 kilogram per bag of cement grouting and finishing the top layer with 20 millimetre thick brick bedding in cement mortar 1:3 with waterproofing compound 1 kilogram per bag of cement and testing the treated portion for 48 hours by pond test and covering ten years guarantee on requisite stamp paper including curing etcetera complete. (Material including all lead and lifts)

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

E) Fourth Floor

ITEM No. 43 :- Providing and applying two coats of High Albedo paint having minimum Solar Reflective Index (SRI) 108 (with solar reflectance & thermal emittance tested as per ASTM) C 1549 and ASTM C 1371 respectively, VOC less than 10 cc/gm. The coating thickness and the methodology of application shall strctly as per manufacturer's specifitions and as approved by engineer in charge. Surface preparation includes cleaning with metal wire brush to remove all dust, fungus etcetera, washing with water all complete. The contractor shall give guarantee for the performance of SRI and also the durabitity of coating, all complete as per direction of Engineer - in- incharge. (Material including all lead and lifts)

A) Ground Floor

B) Third Floor

C) Fourth Floor

ITEM No. 44 :- Providing and laying waterproof treatment of terrace slab with Burnt Brick Coba in all position with an average thickness of 150 millimetre consisting specialised materials as per the manufactures specifications and covering 10 year guarntee on court fee stamp paper including all lead, lift, etcetera complete. (Material including all lead and lifts)

A) Ground Floor

B) Third Floor

C) Fourth Floor

ITEM No. 45 :- Providing and laying telephone black / Amba White / Cadburybrown / Ruby red / Ocean Brown granite stone of 18 to 20 millimetre thick for door frame/ dado/ window boxing etcetera on cement mortar 1:6 including filling joints with polymer base filler nosing the sharp edges wherever necessary, curing, etcetera complete. (Material including all lead and lifts)

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

E) Fourth Floor

ITEM No. 46 :- Providing and laying vitrified matt finish tiles having size 590 millimetre to 605 millimetre X to 605 millimetre of 8 to 10 millimetre thickness and confirming IS. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etcetera complete. a) Flooring (Material including all lead and lifts)

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

E) Fourth Floor

ITEM No. 47 :- Providing and laying vitrified matt finish tiles having size 590 millimetre to 605 millimetre X to 605 millimetre of 8 to 10 millimetre thickness and confirming IS. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etcetera complete. b) Skirting (Material including all lead and lifts)

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

E) Fourth Floor

ITEM No. 48 :- Providing and laying 18 millimetre thick ADONI BROWN LEATHER FINISH stone for flooring, machine cut in required size, approved shade, color and texture laid using white cement slurry over 20 millimetre (average) thick base of cement mortar 1:4 followed by laying, fixing and jointed with white cement slurry mixed with matching pigment, including rubbing and curing moulding and polishing to edge to give high gloss finish etcetera complete. The application rate for tile adhesives shall be as per manufacturer's recommendations as per detail drawing. The rate shall be inclusive of all labour, material, wastage, scaffolding, transportation, taxes, including all leads, lifts at all levels and as directed by Engineer in charge complete. a) Flooring (Material including all lead and lifts)

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

E) Fourth Floor

ITEM No. 49 :- Providing and laying 18 millimetre thick ADONI BROWN LEATHER FINISH stone for flooring, machine cut in required size, approved shade, color and texture laid using white cement slurry over 20 millimetre (average) thick base of cement mortar 1:4 followed by laying, fixing and jointed with white cement slurry mixed with matching pigment, including rubbing and curing moulding and polishing to edge to give high gloss finish etcetera complete. The application rate for tile adhesives shall be as per manufacturer's recommendations as per detail drawing. The rate shall be inclusive of all labour, material, wastage, scaffolding, transportation, taxes, including all leads, lifts at all levels and as directed by Engineer in charge complete. a) Skirting (Material including all lead and lifts)

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

E) Fourth Floor

ITEM No. 50 :- Providing and laying polished hand cut Kotah Stone flooring 25millimetre to 30millimetre thick and 45 centimetre to 55 centimetre wide in plain/diamond pattern on a bed of 1:6 C.M. including cement float, filling joints with neat cement slurry, curing, polishing and cleaning complete. (Material including all lead and lifts)

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

E) Fourth Floor

ITEM No. 51 :- Providing Mirror polishing to Kota Stone including using all necessary stones and equipments cleaning, washing etcetera complete. For Flooring, (Material including all lead and lifts)

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

E) Fourth Floor

ITEM No. 52 :- Providing and laying in position flooring of telephone black / Amba White / Cat bary brown / Ruby red / Ocean Brown granite stone of approved shade and size 18 millimetre to 20 millimetre thick on bed 1:6 cement mortar including cement floats striking joints, pointing in C.M. 1:3 curing and cleaning etcetera complete. (Material including all lead and lifts)

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

E) Fourth Floor

ITEM No. 53 :- Providing and fixing machine cut machine polished 18 millimetre to 20 millimetre thick telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone for treads and risers of steps and staircases of approved colour and shade with rounded moulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaning etcetera complete. (Material including all lead and lifts)

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

E) Fourth Floor

ITEM No. 54 :- Providing and laying Antiskid Ceramic tiles of approved quality of size 30 centimetre x 30 centimetre and confirming to IS 15622-2006 (Group-B IIA) for antiskid flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing etcetera complete. (Material including all lead and lifts)

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

E) Fourth Floor

ITEM No. 55 :- Providing and laying ceramic tiles having size 30 centimetre X 45 centimetre confirming to corresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etcetera complete. (Material including all lead and lifts)

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

E) Fourth Floor

ITEM No. 56 :- Providing 25 millimetre to 30 millimetre thick partition of polished black kadappa stone slab of approved quality including giving required size and shape etcetera fixing in cement mortar 1:3 curing and cement etcetera complete. b) Both side polish (Material including all lead and lifts)

B) First Floor

C) Second Floor

D) Third Floor

E) Fourth Floor

ITEM No. 57 :- Providing and applying well mixed polymer cement slurry in ratio 1:2 over well soaked but surface dry concrete and steel rebar for adhesion of fresh cement and sand mortar as per specification as directed etcetera complete. (item includes use of polymers like sikalatex or similar materials of relevant specification and scaffolding for height 8 to 10 meter) (Material including all lead and lifts)

ITEM No. 58 :- Providing and fixing heavy duty inter locking concrete RUBBER MOULD GLOSSY PAVING BLOCKS of 60 millimeter thickness of having a strength of 400 Kg/sq.m of approved quality and shape on a bed of crushed sand of 25 to 30 millimeter thick including striking joints and cleaning etcetera complete. (using 100% crushed sand) (Material including all lead and lifts)

ITEM No. 59 :- Providing and fixing 34 millimetre thick moulded door shutter consisting of solid core single leaf flush door of 30 millimetre thickness lipped with 15 millimetre ( 5 millimetre X 3 ) thick X 30 millimetre width on one style and top rail and 10 millimetre (5 millimetre X 2 ) thick X 30 millimetre width on other style and bottom rails. The inner panels laminated with 2 millimetre thick termite proof, water proof and fire resistant moulded PVC sheet with 2,4,6 design in different plain and /or prelim colours on one side after routing the moulded design on flush doors and 2 millimetre plain and /or pre lam PVC on other side using rubber adhesive on flush door and solvent cement adhesive on the PVC lipping etcetera as per direction of Engineer in charge and manufacturers specification and drawing etcetera complete. (Material including all lead and lifts)

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

E) Fourth Floor

ITEM No. 60 :- Providing and Fixing 30 MILLIMETRE thick BOTH SIDE PRELAMINATED SOLID PANEL PVC DOOR SHUTTER consisting of frame made out of M.S tubes of 19 guage thickness and, size 19 x 19 millimetre for styles and 15 x15 millimetre for the top and bottom rails, M.S frame shall have a coat of metel primer of approved make and manufacture. M.S frame shall be covered with heat mouled PVC 'C' channel made from 5 millimetre (+/0.25) thick prelaminated sheet of density 600 kg/cbm,of size 30millimetre thickness 70millimetre width out of which 50millimetre shall be flat and 20millimetre shall be tapered in 45? angle on either side forming stiles ? and 5 millimetre thick,95 millimetre wide PVC sheet out of which 75 millimetre shall be falt and 20 millimetre shall be tapered in 45 on the inner side to form top and bottom rail and 115 millimetre wide PVC sheet out of which 75 millimetre shall be falt and 20 millimetre shall be tapered on both sides to form lock rail.Top,bottom and lock rail shall be provided either side of the panel. An additional 5 millimetre (+/0.25) thick PVC strip of 20 millimetre width is to be stuck on the bottom side of the ' c ' channel prelaminated paneling of 5 millimetre (+/0.25) thick PVC sheet to be fitted inside the M.S. frame welded/ sealed to the styles and rails with 5 millimetre (+/0.25) x 30 millimetre PVC sheet beading on either side and joined together with solvent cement adhesive etc,10 millimetre thickness (5 millimetre (+/0.25) x 2 nos ) 20 millimetre wide cross PVC sheet as gap insert for the rail and bottom rail. Door to be fixed to frames with 3 nos M.S.powder coated but hinges of size 100 millimetre X 25 Millimetre X 2millimetre using 32 millimetre long steel screws drilled suitable to pass through both the walls of the M.S tube, other hardwares should be fixed with 19 X 6 millimetre size steel screws including fixture fasting, complete as per direction of engineer in charge. (Material including all lead and lifts)

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

E) Fourth Floor

ITEM No. 61 :- Providing and fixing in position, Double shuttered aluminium extruded powder coated openable door of specified size with aluminium door frame of powder coated section 101.60 X 44.75 millimetre, 3.18 millimetre thick and shutter comprising of powder coated section having bottom and lock rail of size 150 millimetre X 44.5 millimetre X 3.00 millimetre thick top rails 47.62 X 44.45 millimetre X 3.00 millimetre thick, vertical style 47.62 X 44.45 millimetre, 3.00 millimetre thick and for shutter plain glass panes 5 millimetre thick for top panels and 12 millimetre thick both side laminated phenol bonded particle board panels for bottom panels etcetera, I.S.I. mark, heavy duty, Hydraulic floor spring of 150 kilogram capacity, having heavy duty concealed lock, necessary beading, glazing clips, PVC gaskets, 250 millimetre length aluminium tower bolts, 150 millimetre diameter pad handle, etcetera as per detailed design and drawing or as directed by engineer in charge including all materials, labours, and equipment etcetera complete. (Material including all lead and lifts)

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

ITEM No. 62 :- Providing and fixing shutter to wall cupboard made from 19 millimetre thick Teak particle board with approved coloured laminated face 1.5 millimetre thick bonded with phenol formaldehyde synthetic resin B.W.P. grade including lipping beading iron oxidised fixtures and fastening and oil primer coat etcetera complete. (Excluding cupboard frame). (Material including all lead and lifts)

B) First Floor

C) Second Floor

D) Third Floor

E) Fourth Floor

ITEM No. 63 :- Providing and fixing collapsible steel gate in one / two leaves with hot rolled vertical channels of 18 X 9 X 3 millimetre minimum size, crossings of Mild Steel flats of size 18 X 5 millimetre T or E section for runner of minimum 40 X 6 millimetre size for flange, M.S. flat for top runner of minimum size 40 X 12 millimetre with roller wheels confirming to grade F.G. 150 fitted with snap headed rivets of minimum size 6 millimetre max. spacing of vertical channels be 100 millimetre enclosed gate position and clear space of 150 millimetre between two sets of crossings with hold fasts, stoppers, spaces, handles, locking arrangement and one coat of red lead primer and oil painting etcetera complete. (I.S. 10521:1983). (Material including all lead and lifts)

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

E) Fourth Floor

ITEM No. 64 :- Sliding Window- 3 Track (2 Glass shutter + 1 flymesh) of approved make with DGU, providing and fixing of Sliding Window- 3 Track (2 Glass shutter + 1 flymesh ). For details refer to Specifications and as directed by Engineer in charge. (Material including all lead and lifts)

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

E) Fourth Floor

ITEM No. 65 :- Providing and fixing in position powder coated aluminium louvered windows / ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 X 38 millimetre X 1.22 millimetre box type, 5 millimetre thick sheet glass louvers, of approved quality etcetera complete. (Material including all lead and lifts)

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

E) Fourth Floor

ITEM No. 66 :- Providing and Fixing mat finish stainless steel (of 302 grade ) railing with top pipe of 50 millimetre diameter and vertical pipe of 38 millimetre diametre at 0.60 metre centre to centre or as required and horizontal pipes of 25 millimetre diametre in three rows, all pipes of 2 millimetre thick including buffing, fabricating fixtures and fastening including pipe base of appropriate diameter and ball base of 75 millimetre diameter above newel post of 75 millimetre diameter etcetera complete (Prior approval of sample and brand by Executive Engineer is necessary before use) (Material including all lead and lifts)

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

E) Fourth Floor

ITEM No. 67 :- Providing and fixing on walls/ ceiling/ floor 15 millimetre diameter CPVC pipe with necessary fittings, remaking good the demolished portion etcetera complete including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etcetera complete. (Material including all lead and lifts)

ITEM No. 68 :- Providing and fixing on walls / ceiling / floor 25 millimetre diameter CPVC pipe with necessary fittings, remaking good the demolished portion etcetera complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etcetera complete. (Material including all lead and lifts)

ITEM No. 69 :- Providing and fixing on walls /ceiling/ floor 40 millimetre diameter CPVC pipe with necessary fittings, remaking good the demolished portion etcetera complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etcetera complete. (Material including all lead and lifts)

ITEM No. 70 :- Providing and laying in trenches 50 millimetre daimetre CPVC pipe including necessary excavation, fittings. Refilling trenches etcetera complete, including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etcetera complete. (Material including all lead and lifts)

ITEM No. 71 :- Providing and fixing C.P. BIB cock with wall flange of approved make including necessary sockets / union nut etcetera complete as directed by Engineer in charge. (Material including all lead and lifts)

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

E) Fourth Floor

ITEM No. 72 :- Providing and fixing C.P. 2 Way BIB cock with wall flange of approved make including necessary sockets/ union nut etcetera complete as directed by Engineer in charge. (Material including all lead and lifts)

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

E) Fourth Floor

ITEM No. 73 :- Providing and fixing Shower Head, with shower arm of approved make mixer of including all necessary pipe fittings and connections etcetera complete as directed by Engineer in charge. (Material including all lead and lifts)

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

E) Fourth Floor

ITEM No. 74 :- Providing and fixing white Jaquar or equivalent make Opal series European type wall-hung, of size 400 millimetre X 370 millimetre X 575 millimetre with approved make flush valve including soil pipe, vent pipe upto outside face of wall, 100 millimetre diametre Cast Iron plug bend inlet pipe all fittings, cutting and making good walls, floors etcetera as directed by Engineer in charge. (Material including all lead and lifts)

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

E) Fourth Floor

ITEM No. 75 :- Providing and fixing Jaquar or equivalent make Hand shower (health faucet) with 8 millimetre diametre 1 metre long flexible tube having wall hook with approved make including necessary sockets/ union nut etcetera complete as directed by Engineer in charge. (Material including all lead and lifts)

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

E) Fourth Floor

ITEM No. 76 :- Providing and fixing Orissa Pan of size 580 X 445 X 260 millimetre with approved make flush valve including trap, C.I. soil and vent pipe upto outside face of wall including 100 millimetre diametre Cast Iron plug, bend and necessary pipe connection, etcetera complete as directed by Engineer in charge. (Material including all lead and lifts)

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

E) Fourth Floor

ITEM No. 77 :- Providing and fixing wall-hung white wash basin of size 470 X 575 X 190 millimetre of approved make half pedestal, pillar cock, C.P. Angular stop cock, long thread continental including Stainless Steel bottle trap of having necessary pipe connections up to the outside face of the wall etcetera complete. (Material including all lead and lifts)

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

E) Fourth Floor

ITEM No. 78 :- Providing and fixing stainless steel sink of size 600 x 510 x 200 millimetre including coupling, outlet pipe, elbow and other necessary fitting, finishing etcetera complete. (Material including all lead and lifts)

A) First Floor

B) Second Floor

ITEM No. 79 :- Providing and fixing C.P. sink cock with raised J shaped swinging casted spout jaquar or equivalent make continental (CAT.NO. CON -359) including necessary sockets/ union nut etcetera complete. (Material including all lead and lifts)

A) First Floor

B) Second Floor

ITEM No. 80 :- Providing and fixing H.D.P container Syntex or alike one piece moulded water tank made out of low density polythyler and built corrugation including of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow of all tanks capacity above 1000 to 20,000 litres. (Material including all lead and lifts)

E) Fourth Floor

ITEM No. 81 :- Providing and fixing 15 centimetre rigid PVC Nahani trap including PVC grating, bend, connecting piece of UPVC pipe up to the outside face of wall, making the good damaged surface and testing etcetera complete. (Prior approval of sample and brand by Executive Engineer is necessary before use) (Material including all lead and lifts)

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

E) Fourth Floor

ITEM No. 82 :- Providing and fixing screw down for 25 millimetre diameter wheeled stop tap of brass including necessary sockets/union nut complete. (Material including all lead and lifts)

ITEM No. 83 :- Providing and fixing screw down for 40 millimetre diameter wheeled stop tap of brass including necessary sockets/union nut complete. (Material including all lead and lifts)

ITEM No. 84 :- Providing and fixing screw down for 50 millimetre diameter wheeled stop tap of brass including necessary sockets/ union nut complete. (Material including all lead and lifts)

ITEM No. 85 :- Providing and fixing Poly Vinyl Chloride Rain water pipes of 110 millimetre outer diameter and having wall thickness of 2.2 to 2.7 millimetre confirming to I.S. 13592-1992 including proper rainwater receiving recess with P.V.C. plug, bend, necessary fittings, such as, offsets, shoes, including fixing the pipe on wall using approved wooden cleats projecting 25 millimetre to 40 millimetre from face of wall a fixing with clips of approved quality and number, filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on Cement concrete or masonry blocks, including necessary scaffolding and maintenance for 3 years for any leakages or dislocations of pipes, all the P.V.C. fittings and additional 2 piece socket clips shall be got approved from engineer in charge etcetera complete. (The contractor shall give 3 years guarantee bond for payment). (Material including all lead and lifts)

ITEM No. 86 :- Providing and fixing 100 millimetre diametre stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etcetera complete. (Material including all lead and lifts)

ITEM No. 88 :- Providing and laying concrete pipes of I.S. NP class of 300 millimetre diameter in proper line, level and slope including necessary collars, excavation, laying, fixing with collars in cement mortar 1:1 and refilling the trench complete. (Material including all lead and lifts)

ITEM No. 89 :- Providing and constructing Brick Masonry Inspection Chamber 60 centimetre x 45 centimetre x 90 centimetre including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete with reinforced cement concrete Cover medium duty 140 kilogram with frame etcetera complete. (Material including all lead and lifts)

ITEM No. 90 :- Providing and constructing Brick Masonry Inspection Chamber 90 centimetre x 45 centimetre x 90 centimetre including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete with reinforced cement concrete Cover medium duty 140 kilogram with frame etcetera complete. (Material including all lead and lifts)

ITEM No. 91 :- Providing and fixing in position UPVC ultra violet stabilized 110 millimetre outer diameter cowl dome confirming to I.S.-4985 including making joints with solvent cement etcetera complete. (Material including all lead and lifts)

ITEM No. 92 :- Providing soak pit of size 120 centimetre x 120 centimetre x 120 centimetre including excavating and filling with brick-bats. (Material including all lead and lifts)

ITEM No. 93 :- Providing and fixing 450 millimetre X 550millimetre size superior type Belgium mirror with 16 millimetre diameter nickel plated towel rod etcetera complete. (Material including all lead and lifts)

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

E) Fourth Floor

ITEM No. 94 :- Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etcetera as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted / bolted /welded connections without connecting plates, braces etcetera and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etcetera complete. (Material including all lead and lifts) (Forth Floor)

ITEM No. 95 :- Providing and applying two coats of wall care Putty on plastered surface and Ceiling and Walls to prepare surface even and smooth of approved make, etcetera complete. (Material including all lead and lifts)

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

E) Fourth Floor

ITEM No. 96 :- Providing and applying priming coat on concrete/ masonary/ Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etcetera complete. (Material including all lead and lifts)

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

E) Fourth Floor

ITEM No. 97 :- Providing and applying two Coats of high quality acrylic copolymer matt latex low VOC emulsion paint of approved shadethat gives smooth, flat and washable and durable finishing of approved make, Paint should have good flow levelling property with good colour retention and in can antibacterial property. Paint has to be applied on smooth and uniform surface prepared by an acrylic copolymer low VOC and odour putty. This surface should be primed with water based low VOC acrylic copolymer based primer sealer that has in can antibacterial property. The work activity should cover all aspects of applying paints from surface preparation, filling to erecting and dismantling of scaffolding, finishing the surface etcetera as directed by Engineer in charge. (Material including all lead and lifts)

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

E) Fourth Floor

ITEM No. 98 :- Providing and applying 2 coats of 100% Pure acrylic low VOC and APEO & HCHO free water based paint of approved colour that belongs to class 1 flame spread resistance of approved make Paint should provide durable and long lasting silk finish with a high crack tolerance of upto 1 millimetre, paint should have an oustanding washability with high resistance to wide range of bacteria and fungus. Paint has to be applied on smooth and uniform surface prepared by an acrylic copolymer low VOC & Odour putty. This surface should be primed with water based low VOC Primer. The work activity should cover all aspects of applying paints from surface preparation as directed by Engineer in charge. (Material including all lead and lifts)

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

E) Fourth Floor

ITEM No. 99 :- Providing and fixing 90 centimetre x 60 centimetre Granite plate engraving 10 centimetre height letter, figures including painting the letters / figures with approved colour and shade complete. (Material including all lead and lifts)

ITEM No. 101 :- Excavation for catch / side water gutter in all sorts of soils to the specified section including stacking the excavated stuff in a regular bund and disposing of unsuitable or excess stuff as directed all sorts of soils.

ITEM No. 102 :- Excavation for catch / side water gutter in Hard murum strata to the specified section including stacking the excavated stuff in a regular bund and disposing of unsuitable or excess stuff as directed.

ITEM No. 103 :- Providing and laying Cast in situ/Ready Mix cement concrete in M20 of trap/ granite / quartzite / gneiss metal for bed blocks, foundation blocks and such other items including bailing out water, plywood / steel formwork, laying / pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etcetera complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etcetera (Wooden centering will not be allowed.), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etcetera complete. With natural sand/V.S.I. quality Artificial Sand

ITEM No. 104 :- Providing and laying in situ / ready mix / ready mix M20 RCC work with trap/ granite/ quartzite / gneiss metal in well steining including shuttering, compacting by vibrating, finishing and curing etcetera complete. (fully automatic micro processor based PLC with SCADA enabled with reversible drum type mixer/ concrete batch mix plant (pan mixer) with natural / artifical sand, excluding reinforcement)

ITEM No. 105 :- Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite / quartzite/ gneiss metal for reinforced cement concrete slabs and landings as per detailed designs and drawings including centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etcetera complete, (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etcetera complete. With natural sand/V.S.I. quality Artificial Sand

ITEM No. 106 :- Providing and fixing reinforced cement concrete cover of size 90 centimetre X 45 centimetre with frame over inspection chamber etcetera complete Medium duty (140 kilogram)

ITEM No. 107 :- Supplying hard murum/ kankar at the road site, including conveying and stacking complete.

ITEM No. 108 :- Spreading hard murum for side width etcetera complete

ITEM No. 109 :- Compacting the hard murum side widths including laying in layers on each side with power roller including artificial watering etcetera complete.

ITEM No. 110 :- Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing to proper grade and camber, applying and brooming requisite type of screening / binding Materials to fill up the interstices of coarse aggregate, watering and compacting with Vibratory roller to the required density. Grading I (Using Screening Type B (11.2 millimetre) Aggregate)

ITEM No. 111 :- Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 millimetre, cement content not to be less than 150 kilogram per cubic metre, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant/ Weigh batch mixer, transported to site with all leads and lifts, laid with a paver with electronic sensor / by suitable means as approved by Engineer-in-charge, compacting with vibratory roller, finishing, curing and including preparation of sub-grade surface if required etcetera complete.

ITEM No. 112 :- Providing and laying in situ cement concrete M-30 with tremix treatment for 200 millimetre thickness for Concrete Road is including laying plastic sheet for 125 micron thickness with groove cutting of 4 millimetre wide and 20 millimetre deep with necessary refilling with bitumen (excluding reinforcement) with Natural sand etcetera complete

ITEM No. 113 :- Providing and laying concrete pipes of I.S. NP class of 300 millimetre diameter in proper line, level and slope including necessary collars, excavation, laying, fixing with collars in cement mortar 1:1 and refilling the trench complete. (Material including all lead and lifts)

ITEM No. 114 :- Painting Line, Dashes, Arrows etc on Roads in two coats on new work with ready mixed road marking paint confirming to I.S. 164 on Bituminous surface including cleaning the surface of all dirt, dust and other foreign matter, demarcation at site and traffic control. Over 10 centimetre wide on new surface.

ITEM No. 115 :- Providing and fixing Cautionary / Warning sign boards in Equilateral Triangle size of 600 millimetre made out of 4 millimetre aluminum composite material, sheet bonded with white retro reflective sheeting of Class B (Type IV High intensity micro-prismatic grade sheeting-HIP) having pressure sensitive / heat activated adhesive retoreflective specified back ground, border and back side retoreflctive symbols, letters, numerals, arrow as per IRC:67-2012 Table No 8.3 Supported with back support frame 25 millimetre X 25 millimetre X 3 millimetre, duly painted on back side with grey stove enamel paint and supported on one Number of Mild steel angle iron post of size 65 millimetre X 65 millimetre X 6 millimetre, 3.45 metre long, duly painted with with flat oil paint having alternate black and white bands of 25 centimetre width including Galvanised Iron fixtures etcetera; fixing the boards in M-25 grade concrete block of size 60 centimetre X 60 centimetre X 75 centimetre including transportation etcetera; complete. Class B ( Type IV High intensity micro-prismatic grade sheeting-HIP) shall have 7 years written warranty from the manufacturer and authorised distributor / convertor issued for field performance including the screen printed areas and cut-out sheeting and cut-out durable transparent overlay film and this warranty certificate in original should be submitted to the Engineer in charge by the contractor / supplier.

ITEM No. 116 :- Dismantling brick masonry in lime or cement mortar and stacking the materials as directed with all leads, lifts etcetera.

ITEM No. 117 :- Dismantling stone masonry in lime or cement mortar including stacking the materils as directed with all leads, lifts etcetera

ITEM No. 118 :- Removing lime or lean cement concrete including stacking the spoils as directed with all leads, lifts etcetera, complete.

ITEM No. 119 :- Lowering down the debris obtained from breaking and removing the cement plaster / burnt brick masonry of the first floor by any means without causing dust nuisance and damage to structure, stacking the same as and where directed including cleaning the site complete.

ITEM No. 120 :- Providing and laying in situ / Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for reinforced cement concrete work in foundations like raft, strip foundations, grillage and footings of reinforced cement concrete columns and steel stanchions etcetera including bailing out water, formwork, laying / pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etcetera complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etcetera complete. With natural sand / V.S.I. quality Artificial Sand.

ITEM No. 121 :- Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for reinforced cement concrete columns as per detailed designs and drawing or as directed including centering, formwork, cover blocks, laying / pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etcetera complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etcetera complete. With natural sand / V.S.I. quality Artificial Sand

ITEM No. 122 :- Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for reinforced cement concrete beams and lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks, laying / pumping, compaction and roughening the surface if special finish is to be provided and curing etcetera complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer / concrete Batch mix plant (Pan mixer) etcetera complete. With natural sand/V.S.I. quality Artificial Sand.

ITEM No. 123 :- Providing and laying Cast in situ / Ready Mix cement concrete in M-20 of trap/ granite/ quartzite/ gneiss metal for reinforced cement concrete pardi of required thickness including centering, formwork, cover blocks, laying / pumping, compacting, curing, finishing and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etcetera complete. With natural sand / V.S.I. quality Artificial Sand.

ITEM No. 124 :- Providing and fixing bituminous pad 25millimetre thick for expansion joints in retaining wall, compound wall etcetera complete.

ITEM No. 125 :- Providing internal cement plaster 20 millimetre thick in two coats in cement mortar 1:5 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etcetera complete

ITEM No. 126 :- Providing and applying three coats of water proof cement paint of approved manufacture and of approved colour to new plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days etcetera complete.

ITEM No. 127 :- Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite/ quartzite/ gneiss metal for reinforced cement concrete chajja as per detailed design and drawings including centering, formwork, cover blocks compacting, curing, finishing and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etcetera complete. With natural sand / V.S.I. quality Artificial Sand

ITEM No. 128 :- Providing and fixing M40 grade thick vibrated pull cast or similar type concrete frame with chamfer conforming to I.S. 6524:1983 having 6 millimetre diametre bars 3 Numbers and strips @ 250 millimetre centre to centre and fixing in wall with 6 Numbers of hold fast of 12 millimetre diametres bars 500 millimetre long including primer and oil painting etcetera complete) frame size 60 millimetre X 125 millimetre.

ITEM No. 129 :- Providing and laying ceramic tiles of having size 30 centimetre x 30 centimetre confirming to I.S.15622 / 2006 (group D II-A) and 7 to 8 millimetre thick for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with white/colour cement slurry cleaning curing etcetera complete.

ITEM No. 130 :- Providing and laying ceramic tiles of having size 30 centimetre x 30 centimetre and confirming to corresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etcetera complete.

ITEM No. 131 :- Providing and applying washable oil-bound distemper of approved colour and shade to old and new surfaces in two coats including scaffolding, preparing the surfaces. (excluding the primer coat.) etcetera complete.

ITEM No. 132 :- Providing and fixing reinforced cement concrete cover of size 60 centimetre x 45 centimetre with frame over inspection chamber etcetera complete. Medium duty (100 Kilogram)

ITEM No. 133 :- Drilling surface bore well 150 millimetre diameter in all types of strata by DTH rig machine including transportation etcetera complete.

ITEM No. 134 :- Providing and fixing UPVC casing pipe 180 millimetre diameter (6 Kilogram per centimeter2) (IS 4985-1988) complete.

ITEM No. 135 :- Yield testing by 90 V notches etcetera complete as directed by Engineer in charge

ITEM No. 136 :- Providing and fixing PVC cap for 180 millimetre casing pipe etcetera complete.

ITEM No. 137 :- Providing and supplying in standard lengths H.D.P.E. pipes including all local and central taxes, octrai, inspection charges etcetera complete (6 Kilogram per square centimetre – 63 millimetre diameter).

ITEM No. 138 :- Lowering and grouting PVC casing pipe 63 millimetre diameter (6 Kilogram per centimeter2) (IS 4985-1988) complete.

ITEM No. 139 :- Providing and making ISI Mark ferrule connection of 50 millimetre diameter to water main including ferrule coupling cast iron bell mouth cover, built in non return valve and fixing including excavation and reinstatement complete.

ITEM No. 140 :- RWH - Recharge Pit Providing and constructing recharge pit of 2.0 metre deep and 1.0 metre diametre of pre-cast Reinforced cement concerete rings with 6.5" diametre X 25 metre deep borewell at the floor of recharge pit including installation of combination of solid / perforated PVC casing pipe wrapped around with netlon mesh including 300 millimetre thick side filling around outside of Reinforced cement concete rings (annular space) with 40 millimetre size boulders including filling of recharge pit upto 0.5 metre depth with 25-75 millimetre clean washed gravels from bottom up followed by 0.5 metre depth of 10-25 millimetre of clean washed stones followed by 0.5 metre of washed river fine aggregate ( natural sand / crushed sand VSI grade finely washed etcetera) including netlon mesh between each gravel / fine aggregate (natural sand / crushed sand VSI grade finely washed etcetera) media layer including covering with Reinforced cement concrete slab, manhole frame and cover, PVC rings, PVC end-caps, fittings etcetera including arrangement for inlet and outlet pipe excavation and back filling as shown in the drawing. The rate shall be inclusive of all labour, material, wastage, scaffolding, transportation, taxes, including all leads, lifts at all levels. All material should be of approved make. All works complete as per the drawing, technical specification and direction of the Engineer in charge.

TOTAL : (i) Civil Work

(ii) Electrical Work

ITEM No. 142 :- PVC Conduit 25 millimetre (1.1.9) Supplying and erecting HMS P.V.C. conduit 25 millimetre diametre with necessary accessories in wall / floor with chiselling appropriately as per specification.

ITEM No. 143 :- Rigid PVC Conduit 25 millimetre (1.1.10) Supplying and laying HMS PVC conduit 25 millimetre diametre with necessary accessories in RCC work / false ceiling / false flooring as per specification

ITEM No. 144 :- Rigid PVC Conduit 32 millimetre (1.1.11) Supplying and erecting HMS P.V.C. conduit 32 millimetre diametre with necessary accessories in wall / floor with chiselling appropriately as per specification

ITEM No. 145 :- PVC Conduit 32 millimetre (1.1.12) Supplying and laying HMS PVC conduit millimetre diametre with necessary accessories in RCC work / false ceiling / false flooring as per specification.

ITEM No. 146 :- Mains 1x1.5 sq.mm. (1.3.1) Supplying and erecting mains with 1 X 1.5 sq.mm F.R copper PVC insulated wire laid in provided conduit / trunking / inside pole / Bus bars or any other places as per specification.

ITEM No. 147 :- Mains 2x1.5 sq.mm. (1.3.1) Supplying and erecting mains with 2 x 1.5 sq.mm F.R copper PVC insulated wire laid in provided conduit / trunking / inside pole / Bus bars or any other places as per specification.

ITEM No. 148 :- Mains 1x2.5 sq.mm. (1.3.3) Supplying and erecting mains with 1x2.5 sq.mm F.R copper PVC insulated wire laid in provided conduit / trunking / inside pole / Bus bars or any other places. as per specification.

ITEM No. 149 :- Mains 2x2.5 sq.mm. (1.3.3) Supplying and erecting mains with 2x2.5 sq.mm F.R copper PVC insulated wire laid in provided conduit / trunking / inside pole / Bus bars or any other places as per specification.

ITEM No. 150 :- Bunch of wire 1x4 Sq.mm. (1.3.5) Supplying and erecting mains with 1x4 sq.mm F.R copper PVC insulated wire laid in provided conduit / trunking / inside pole / Bus bars or any other places as per specification.

ITEM No. 151 :- Bunch of wire 2x4 Sq.mm. (1.3.5) Supplying and erecting mains with 2x4 sq.mm F.R copper PVC insulated wire laid in provided conduit / trunking / inside pole / Bus bars or any other places. as per specification.

ITEM No. 152 :- Bunch of wire 1x6 sq.mm. (1.3.7) Supplying and erecting mains with 1x6 sq.mm F.R copper PVC insulated wire laid in provided conduit / trunking / inside pole / Bus bars or any other places as per specification.

ITEM No. 153 :- Bunch of wire 2x6 sq.mm. (1.3.7) Supplying and erecting mains with 2x6 sq.mm F.R copper PVC insulated wire laid in provided conduit / trunking / inside pole / Bus bars or any other places as per specification.

ITEM No. 154 :- Bunch of wire 4x6 sq.mm. (1.3.7) Supplying and erecting mains with 4x6 sq.mm F.R copper PVC insulated wire laid in provided conduit / trunking / inside pole / Bus bars or any other places as per specification.

ITEM No. 155 :- Bunch of wire 4x10 Sq.mm. (1.3.9) Supplying and erecting mains with 4x10 sq.mm F.R copper PVC insulated wire laid in provided conduit / trunking / inside pole / Bus bars or any other places as per specification.

ITEM No. 156 :- Modular Switch 6 A (1.8.1) Supplying and erecting ISI mark modular type switch 6A / 10A duly erected on provided plate and box with wiring connections complete.

ITEM No. 157 :- Modular Switch 16 A (1.8.2) Supplying and erecting ISI mark modular type switch 16A duly erected on provided plate and box with wiring connections complete.

ITEM No. 158 :- Modular Socket 6 A (1.8.10) Supplying and erecting ISI mark modular type 3 pin 6A multi sockets with safety shutter, duly erected on provided plate and box with wiring connections complete.

ITEM No. 159 :- Modular Socket 16 A (1.8.11) Supplying and erecting ISI mark modular type 3 pin 6 / 16A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete.

ITEM No. 160 :- (Modular Indicator Lamp (1.8.12) Supplying and erecting ISI mark modular type indicator lamp, duly erected on provided plate and box with wiring connections complete.

ITEM No. 161 :- Modular Step Regulator (1.8.23) Supplying and erecting ISI mark modular type (two module) electronic step regulator for fan, duly erected on provided plate and box with wiring connections complete. Note : Add Rs.57 / - for additional two module box with double mounting plate if required.

ITEM No. 162 :- Modular Box 12 way (1.8.40) Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 12 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.

ITEM No. 163 :- Modular Box 2 way (1.8.35) Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 2 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.

ITEM No. 164 :- Modular Box 3 way (1.8.36) Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 3 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.

ITEM No. 165 :- Concealed Box (1.8.38) Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 6 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.

ITEM No. 166 :- SPMCB (1.8.44) Supplying and erecting 6 to 32 A SPMCB suitable to fix in 1 module of modular switch in provided box complete and duly concealed with necessary material and connected.

ITEM No. 167 :- Plug Point (1.9.14) Wiring for plug on board with Switch socket concealed type, copper wiring and earthing and with modular accessories as per specification.

ITEM No. 168 :- Light Point Wiring (1.9.9) Point wiring for light / fan / bell concealed type in min 20 mm ISI marked HMS PVC conduit with 1.5 sq.mm. (2+1E) FR grade copper wires, modular type switch, earthing and required accessories as per specification No:

ITEM No. 169 :- Point wiring (1.9.27) Point wiring for independent plug in PVC trunking (casing-capping) with 1.5 sq.mm (2+1E) FR grade copper wire, modular type switch, earthing and required accessories as per specification.

ITEM No. 170 :- LED (2.1.4) Supplying and erecting LED square / circular 13 to 15W down lighter having pressure die-cast aluminum housing, opal translucent cover, mounting arrangement with board for surface type or spring loaded mounting clips for flush type complete.

ITEM No. 171 :- LED Panel Light (2.1.11) Supplying and erecting square shaped CRCA / die-cast aluminium powder coated housing LED panel light (slim edge-lit) 600 X 600 millimetre suitable for 36 W-40W with provision for plane front frame with translucent cover fixed to the housing complete.

ITEM No. 172 :- LED Bulk Head (2.1.21) Supplying and erecting decorative oval bulk head edge-lit 10W LED luminaire comprising of high brightness LED Fitting on provided PVC block / wooden board.

ITEM No. 173 :- LED Tube (2.1.23) Supplying and erecting LED 20W tube light fitting (4 feet) with aluminium housing, heat sink, integrated HF electronic driver complete.

ITEM No. 174 :- LED Street Light Fitting (2.5.6) Supplying and erecting LED street light fitting suitable for above 70W- 75 lamp, including lamp, with PF > 0.95 class IP 65 and above housing of pressure die cast aluminium alloy and heat sink extruded aluminium complete per specification.

ITEM No. 175 :- LED Flood Light (2.5.13) Supplying and erecting LED Flood light fitting of 50W, including lamp, with PF > 0.95, class IP 65 and above class IP 65 and above housing of pressure die cast aluminium alloy and heat sink extruded aluminium complete per specification.

ITEM No. 176 :- Wall Bracket (2.9.4) Supplying and erecting street light Wall bracket made from 40 millimetre diametre ‘B’ class G.I. pipe 1.2 m in total length complete as per specification.

ITEM No. 177 :- Exhaust Fan (2.12.14) Supplying and erecting fresh air cum exhaust fan of light duty250 V A.C. 50 cycles 225 millimetre 1400 RPM rust proof body and blades, wire mesh, duly erected in an approved manner.

ITEM No. 178 :- Exhaust Fan (2.12.18) Supplying and erecting exhaust fan heavy duty 230 V A.C. 50 cycles 450 millimetre 1400 RPM complete erected in position as per specification.

ITEM No. 179 :- Ceiling Fan (2.12.21) Supplying and erecting five star rated energy saving Ceiling fan 230 V A.C. 50 cycles 1200 mm complete erected in position as per specification.

ITEM No. 180 :- Fan Hook Box (2.13.5) Supplying and erecting fan hook box of 10 millimetre M.S. round bar bounded to the R.C.C. bars upto 50 millimetre length each side and pierced through a 16 S.W.G. thick aluminium / M.S. Bowl 100 millimetre diametre or equivalent square size and having depth upto 75 millimetre complete erected with duly painted by one coat of red oxide paint and two coats of paint erected in position and without any leakage of slurry of cement concrete on either side of the box and positioned to the bottom level of the slab.

ITEM No. 181 :- Water Cooler (3.3.4) Supplying, erecting, testing and commissioning self-contained water cooler 230 / 250 V 50 cycles nominal cooling capacity of 80 litres per hr and storage capacity 120 litres with partially stainless steel body complete as per specification.

ITEM No. 182 :- Water Purifier (3.5.1) Supplying and erecting ultra violet storage type water purifier (RO+UV+UF) with softener for safe drinking water consisting of UV germicidal tube of 8W capacity choke made of copper wire and two indicator lamps with output of purified water 7 to 8 litre per min with activated carbon filter and softener operating on 230 V single phase A.C. supply.

ITEM No. 183 :- SPMCB 6 A to 32 A (5.3.2) Supplying, erecting and marking SPMCB 6A to 32A, C-series (for motor / power) in provided distribution board as per specification no. SW-SWR / MCB

ITEM No. 184 :- SPMCB 6 A to 32 A (5.3.3) Supplying, erecting and marking SPMCB 6A to 32A, B- series (for lighting) in provided distribution board as per specification.

ITEM No. 185 :- MCB DP (5.3.6) Supplying, erecting and marking DPMCB 6A to 32A, C- series (for motor / power) in provided distribution board as per specification.

ITEM No. 186 :- MCB TP 40 A to 63 A (5.3.15) Supplying, erecting and marking TPMCB 40A to 63A in provided distribution board as per specification.

ITEM No. 187 :- FPMCB (5.3.17) Supplying, erecting and marking FPMCB 40A to 63A in provided distribution board as per specification.

ITEM No. 188 :- TPNDB (5.4.7) Supplying and erecting triple pole and neutral distribution board (TPNDB) with door surface / flush mounted SPMCB of 12 ways, on iron / GI frame (horizontal busbar type) as per specification.

ITEM No. 189 :- SPNDB (5.4.19) Supplying and erecting single pole and neutral distribution board (SPNDB) with door surface / flush mounted with 2 ways for incoming and 10 ways for outgoing SP MCB’s on iron / GI frame as per specification.

ITEM No. 190 :- MCB Enclosures (5.4.23) Supplying and erecting CRCA sheet metal one way enclosures suitable for DP MCB / TP MCB / FP MCB erected on angle iron / GI frame complete

ITEM No. 191 :- VTPNDB 4 way (5.4.25) Supplying and erecting triple pole and neutral distribution board (TPNDB) with door surface / flush mounted suitable for 3 pole MCCB as incomer and outgoing SP MCB (12 poles) or TP MCB of 4 ways (12 poles) on iron / GI frame. (vertical busbar type) as per specification.

ITEM No. 192 :- MCCB 4 Pole (5.5.1) Providing and erecting 3 Pole MCCB upto 100A, 415V, with short circuit rating 25 kA (Ics=100% of Icu), adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt / UV / trip alarm contact and MCCB should have phase barriers both sides, in provided enclosure on iron / GI frame as per specification.

ITEM No. 193 :- MCCB 3 Pole (5.5.1) Providing and erecting 3 Pole MCCB upto 100A, 415V, with short circuit rating 25 kA (Ics=100% of Icu ),adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt / UV / trip alarm contact and MCCB should have phase barriers both sides, in provided enclosure on iron / GI frame as per specification.

ITEM No. 194 :- MCCB 4 Pole (5.5.3) Providing and erecting 4 Pole MCCB of 250A, 415V capacity with short circuit rating 36 kA (Ics=100% of Icu) adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt / UV / trip alarm contact and MCCB should have phase barriers both sides, in provided enclosure on iron / GI frame as per specification.

ITEM No. 195 :- MCCB Panel 8 ways (5.7.4) Providing and erecting floor / wall mounting, MCCB panel board with door suitable for four pole incoming 250A, 8 ways Four pole outgoing upto 100 A MCCB's on iron frame, as per specification. (Excluding MCCB'S)

ITEM No. 196 :- Cable Alleys (5.7.14) Providing and erecting incoming and outgoing cable alleys suitable for MCCB panel board with door of 250A incoming and 8 way outgoing or 400A incoming and 6 way outgoing made from CRCA sheet 1.6 mm thick duly powder coated and having vertical insulated partition for shielding between the shared face of cableway and DB complete.

ITEM No. 197 :- Prewired Meter (5.7.17) Providing and erecting prewired meter module suitable for MCCB panel board with CT's and emf's VIF meter complete.

ITEM No. 198 :- Arm. cable 3 1 / 2x35 sq.mm. (7.1.16) Supplying, erecting and terminating XLPE armoured cable 3½ core 35 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands and lugs, on wall / trusses / pole or laid in provided trench / pipe as per specification.

ITEM No. 199 :- Hume Pipe (7.6.5) Supplying and laying (including excavation) 15 centimetre diametre RCC Hume pipe with coupling collar of standard thickness at required depth up to 90 cm below road / ground surface, for enclosing provided cable and necessary back filling with light ramming to make the road / ground surface as it was (Except bitumen carpet).

ITEM No. 200 :- Plate Earthing (9.1.1) Providing earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing and recording the results as per specification.

ITEM No. 201 :- Brick Masonry (16.2.1) Making burnt brick masonry with 1:6 ratio cement concrete duly plastered including watering, streaking joint on exposed faces, rocking at joint on exposed faces and watering complete.

ITEM No. 202 :- Chamber Cover (16.2.4) Supplying and erecting RCC chamber cover with frame 60 cm X 45 centimetre medium duty 100 kilogram with lifting arrangement including laying of angle iron frame of angle size as 50 X 50 X 6 millimetre to be fixed / embedded on top of chamber complete.

ITEM No. 203 :- Metering Cubical (6.4.2) Supplying, erecting, testing, commissioning 11 KV HT metering cubical (compact type) approved by MSEDCL / licensee fabricated with 2 mm (14 SWG) M.S. sheets with supporting angle and channel, painted with powder coating / epoxy paint of required shade copper bus bar size 25 X 6 millimetre electronic security lock and heavy duty mechanical lock, with counter meter for measuring no of times the opening of doors, top side cover (CT, PT cover) interlock with meter doors, epoxy coated 3 nos CT having required ratio between 75 / 5 A to 100 / 5 A, VA 10, class 0.2S, 11000 / V3 / 110 / V3 VA 50, class 0.2 epoxy terminal block suitable for provided trivector meter, and provision for incoming and outgoing cables etcetera complete duly tested by licensee with necessary test certificates and erected on provided plinth / cc foundation.

ITEM No. 204 :- Load break (5.9.3) Supplying and erecting extendable / non-extendable outdoor type 11 kV 630A, load break isolator switch on provided MS channels / trench / foundation as per specification.

ITEM No. 205 :- 11kv 185 mm2 cable (7.3.12) Supplying, erecting and terminating 3 x 185 sq. mm. aluminium 11 kV(UE), XLPE armoured cable on wall / ceiling or laid in provided trench / pipe in an approved manner as per specification.

ITEM No. 206 :- Indoor cable kit (7.5.4) Providing and erecting Heat shrinkable indoor termination kit for 11 kV ( E ) XLPE HT cable 3 X 400 sq. mm. with necessary material as per specification.

ITEM No. 207 :- Out Door Kit (7.5.6) Providing and erecting Heat shrinkable outdoor termination kit for 11 kV (E) XLPE HT cable 3x120 to 185 sq. mm. with necessary material as per specification.

ITEM No. 208 :- G.I. Pipe (7.6.4) Supplying and erecting G.I. pipe ‘A’ class 75 millimetre diametre erected for enclosing XLPE armoured cable on wall / pole as per specification.

ITEM No. 209 :- (8.1.14) Supplying and erecting rolled steel joist (girder) pole 152 x 152 mm (37.1 kg / m) with provided base plate in provided foundation as per specification.

ITEM No. 210 :- Web channel (8.4.11)Supplying and erecting 100 x 50 x 6 millimetre with 4.7 millimetre thick web and 7.5 millimetre thick flange channel iron cross arm of suitable length for 2.4 metre wide DP structure and erecting on DP with 50 X 6 millimetre clamp as per approved method of construction and complete as per specification.

ITEM No. 211 :- AB Switch (10.2.2) Supplying and erecting approved make 11 kV outdoor type gang operated air break, triple pole switch 400 A capacity with 3 post pin type insulator per phase, mounted in horizontal or vertical position with necessary channels on provided cross arm with adequate length of "C" class G.I. pipe for operating handle erected on extended square shaft. The operating handle provided with lock and key at suitable height from ground level with necessary clamp.

ITEM No. 212 :- D. O. Fuse 11 KV (10.2.5) Supplying and erecting approved make, 11 kV outdoor type drop out fuse with insulator complete with fuse holders, fuse barrel with metal fitting, fuse element mounted on M.S. channel with working current of 15A capacity complete erected on provided cross arm.

ITEM No. 213 :- PVC Arm. Cable 3 1 / 2x240 sq.mm. (7.1.23) Supplying, erecting and terminating XLPE armoured cable 3½core 240 sq. mm. aluminium conductor with continuous 12.97 sq. millimetre (8 SWG) G.I. earth wire complete erected with glands and lugs, on wall / trusses / pole or laid in provided trench / pipe as per specification.

ITEM No. 214 :- Arm. Cable 3 1 / 2x185 (7.1.22) Supplying, erecting and terminating XLPE armoured cable 1100 V. 3½ core 185 sq. mm. aluminium conductor with continuous 12.97 sq. mm. (8 SWG) G.I. earth wire complete erected with glands and lugs, on wall / trusses / pole or laid in provided trench / pipe as per specification.

ITEM No. 215 :- Arm. Cable 3 1 / 2x120 (7.1.20) Supplying, erecting and terminating XLPE armoured cable 3½ core 120 sq. mm. aluminium conductor with continuous 12.97 sq. mm. (8 SWG) G.I. earth wire complete erected with glands and lugs, on wall / trusses / pole or laid in provided trench / pipe as per specification no. CB-LT / AL

ITEM No. 216 :- C.R.C.A. Sheet (6.1.1) Supplying and erecting metal work in CRCA sheet with fabrication of boxes, panel boards, etc. including cutting, bending, drilling, welding, riveting, treated with anti-rust treatment and duly powder coated or painted with one coat of red lead paint and 2 coats of enamel paint complete.

ITEM No. 217 :- Iron Work (6.1.19) Supplying and erecting iron, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority.

ITEM No. 218 :- MCCB 4 Pole (5.5.3) Providing and erecting 4 Pole MCCB of 250A,415V capacity with short circuit rating 36 kA (Ics=100% of Icu) adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt / UV / trip alarm contact and MCCB should have phase barriers both sides, in provided enclosure on iron / GI frame as per specification.

ITEM No. 219 :- MCCB 4 Pole (5.5.4) Providing and erecting 4 Pole MCCB of 315 / 400A, 415V capacity with short circuit rating 36 kA (Ics=100% of Icu), adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt / UV / trip alarm contact and MCCB should have phase barriers both sides, in provided enclosure on iron / GI frame as per specification.

ITEM No. 220 :- A.C.B (5.8.5) Supplying and erecting air circuit breaker manually operated drawout type of 800A rated at 50º C without deration, 500V, 3 pole having short circuit rating 50 kA (Ics=Icu=Icw for 1s), with standard accessories and thermal magnetic release on provided iron frame as per specification.

ITEM No. 221 :- ACB 1000A (5.8.6) Supplying and erecting air circuit breaker manually operated drawout type of 1000A rated at 50º C without deration, 500V, 3 pole having short circuit rating 50 kA (Ics=Icu=Icw for 1s), with standard accessories and thermal magnetic release on provided iron frame as per specification.

ITEM No. 222 :- D.W.C. Pipe (7.6.12) Supplying and laying (including excavation of suitable width and depth up to 90 cm) 120 millimetre outside diametre double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground / road surface, to required depth complete.

ITEM No. 223 :- D.W.C. Pipe (7.6.11) Supplying and laying (including excavation of suitable width and depth up to 90 cm) 90 millimetre outside diametre double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground / road surface, to required depth complete.

ITEM No. 224 :- Pin Insulator (8.6.9) Supplying and erecting porcelain pin type insulator with G.I. pin suitable for 11kV line, complete as per specification.

ITEM No. 225 :- Lightning Arrester (8.6.15) Supplying and erecting distribution class, 11 kV thyrite type lightning arrester with nut bolts, on provided MS channel as per specification.

ITEM No. 226 :- Disc insulator (8.6.6) Supplying and erecting porcelain disc type insulator with necessary hardware suitable for 11kV line, complete as per specification.

ITEM No. 227 :- ACSR Conductor (8.5.7) Supplying and erecting ACSR conductor of size 6 / 1-2.59 millimetre complete. (Weasel) (127.7 kg per kilometre) as per specification.

ITEM No. 228 :- Excavating (16.1.5) Excavating hard Rock or bituminous road by chiselling for preparing pit for pole / stay / earth plate / for laying cable / pipe and clearing the site by removing debris and making the site as required complete.

ITEM No. 229 :- Transformer Plinth (16.3.1) Making transformer plinth (1.5 x 1.5 x 1.5) m in size with necessary excavation in ground with 150 mm. thick M- 10 PCC at the bottom and top and 250 mm. thick, burnt brick wall constructed at periphery and remaining hollow portion shall be filled with 40 millimetre hard broken aggregate. External surface duly plastered by 12 millimetre thick including watering etc complete.

ITEM No. 230 :- Stone Metal 25 mm (16.2.3) Supplying and spreading stone metal 25 millimetre size for 100 millimetre depth above the ground level complete.

ITEM No. 231 :- Cement concrete Foundation (16.3.7) Making cement concrete foundation in 1:3:6 cement concrete, (20 to 25) millimetre stone metal duly plastered with necessary curing for complete. (pole muffing or any other purpose).

ITEM No. 232 :- (16.3.4) Making cement concrete foundation including excavation (60 x 60) cm x deep 1 / 6 of pole length in 1:3:6 cement concrete 20 x 25 millimetre stone metal, 45 centimere x 45 centimere x 45 centimere / 45 centimere diametre X 45 centimetre height plinth duly plastered, with necessary curing and finishing complete. (for above 9 metre poles)

ITEM No. 233 :- Copper earth Plate (9.1.2) Providing earthing with copper earth plate size 30 x 30 x 0.315 cm complete with all materials, testing and recording the results as per specification.

ITEM No. 234 :- Pipe Type Earthing (9.1.4) Providing pipe type earthing with 40 millimetre diametre G.I. pipe or 20 millimetre diametre G.I. Rod complete with all materials as per specification.

ITEM No. 235 :- Plate Earthing (9.1.1) Providing earthing with galvanized iron earth plate size 60 x 60 x 0.6 centimetre complete with all materials, testing and recording the results as per specification.

ITEM No. 236 :- Cubin board (6.1.15) Supplying and erecting GI sheet 1.6 millimetre (16 SWG) caution board of size 200 X 150 millimetre duly painted with red oxide and enamel paint in Marathi and Hindi erected at position for medium voltage installation.

ITEM No. 237 :- Self-Locking Arrangement (6.1.20) Supplying and erecting self-locking arrangement with keys in duplicate, made of brass duly erected, flush with surface of panel / cupboard.

ITEM No. 238 :- Copper strip (9.2.2) Supplying and erecting copper strip of required size used for earthing on wall and / or any other purpose with necessary copper clamps fixed on wall painted with bituminous paint in an approved manner with joints required as per specification.

ITEM No. 239 :- G. I. Strip (9.2.3) Supplying and erecting GI strip of required size used for earthing on wall and / or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint in an approved manner with joints required as per specification.

ITEM No. 240 :- Aluminium Patti (6.2.11) Supplying and erecting of any size electrolyte aluminium patti or bar in bus bar chamber / in panel or any other purpose, 500 V with require capacity with 99.9% aluminium purity with fixing arrangement (like lug or bottle type lug) to both the end with high grade polyolefin insulation sleeve complete as per specification.

ITEM No. 241 :- (5.10.27) Supplying and erecting porcelain / epoxy bus bar support complete erected in provided MS box for 200 / 300A complete.

ITEM No. 242 :- Bus Bar Support (5.10.28) Supplying and erecting porcelain / epoxy bus bar support complete erected in provided MS box for 400A complete.

ITEM No. 243 :- Transformer 630 KV(10.1.9) Supplying, installing, testing and commissioning 3 phase, 11 / 0.433 kV, 50 Hz., 630 kVA, oil immersed and naturally cooled outdoor type, copper wound transformer, delta / star connected additional neutral brought out on load side, temperature rise should not exceed 40oC by thermometer in oil and 45oC by the resistance in winding at full load rating, with HV tapping (with off load tap changer) off load +5 to -10 in steps of 2.5%, with standard accessories complete with test certificate with losses below 1860 Watts at 50% load, 5300 Watts at 100% load as per IS:1180 - 2014 energy efficiency level II with necessary permissions of Electrical Inspector, as per specification.

ITEM No. 244 :- Brick Masonry (16.2.1) Making burnt brick masonry with 1:6 ratio cement concrete duly plastered including watering, streaking joint on exposed faces, rocking at joint on exposed faces and watering complete.

ITEM No. 245 :- Dismantling Transformer (10.3.1) Dismantling the existing distribution transformer of any capacity from the plinth / foundation safely without any damages.

ITEM No. 246 :- Erection of Transformer 315 KVA (10.1.7) Supplying, installing, testing and commissioning 3 phase, 11 / 0.433 kV, 50 Hz., 315 kVA, oil immersed and naturally cooled outdoor type, copper wound transformer, delta / star connected with additional neutral brought out on load side, temperature rise should not exceed 40oC by thermometer in oil and 45oC by the resistance in winding at full load rating, with HV tapping (with off load tap changer) off load +5 to -10 in steps of 2.5%, with standard accessories complete with test certificate with losses below 1025 Watts at 50% load, 3100 Watts at 100% load as per IS:1180 - 2014 energy efficiency level II with necessary permissions of Electrical Inspector, as per specification (Only Labour Charges)

ITEM No. 247 :- Erection of T / F 160 KVA (10.1.4) Only erection and commissioning 3 phase, 11 / 0.433 kV, 50 Hz., 160 kVA, oil immersed and naturally cooled outdoor type, copper wound transformer, delta / star connected with additional neutral brought out on load side, temperature rise should not exceed 40oC by thermometer in oil and 45oC by the resistance in winding at full load rating, with HV tapping (with off load tap changer) off load +5 to -10 in steps of 2.5%, with standard accessories complete with test certificate with losses below 670 Watts at 50% load, 1950 Watts at 100% load as per IS:1180 - 2014 energy efficiency level II with necessary permissions of Electrical Inspector, as per specification. (Labour charges only)

ITEM No. 248 :- Solar water (4.1.9) Supplying, installing, testing and commissioning of ETC solar water heating system with heat exchanger type of 500 LPD capacity complete. Specification.

ITEM No. 249 :- G.I. Pipe (4.2.3) Supplying and erecting GI pipe 25 millimetre diametre B class with resin bonded flap rock wool / glass wool insulation, with necessary material complete. Specification.

ITEM No. 250 :- (4.2.5)Supplying and erecting GI pipe 40 millimetre diametre B class with resin bonded flap rock wool / glass wool insulation, with necessary material complete, as per specification.

ITEM No. 251 :- Elastomeric Nitrile (4.2.19) Supplying and erecting elastomeric nitrile rubber / foam tube type sleeves for over coating and insulating on provided PC / copper pipes having 9 mm thickness and inner diameter / sizes 28 millimetre for solar water heater system.

ITEM No. 252 :- Nitrile Rubber (4.2.21) Supplying and erecting elastomeric nitrile rubber / foam tube type sleeves for over coating and insulating on provided PC / copper pipes having 9 mm thickness and inner diameter / sizes 42 millimetre for solar water heater system.

ITEM No. 253 :- Iron Work (6.1.19) Supplying and erecting iron, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority.

ITEM No. 254 :- Water Tank (4.4.7) Providing and fixing high-density polyethylene (HDPE) container one piece moulded water tank made out of high density polyethylene and built corrugated inclusive of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow pipe inclusive of all tanks capacity up to 20000 litres.

ITEM No. 255 :- Sluice Valve (16.6.14) Supplying and erecting 40 millimetre diametre gun metal sluice valve at position with necessary materials complete.

ITEM No. 256 :- Sluice Valve (16.6.13) Supplying and erecting 25 millimetre diametre gun metal sluice valve at position with necessary materials complete.

ITEM No. 257 :- Non Return Valve 25 mm (16.6.19) Supplying and erecting non return valve 25 millimetre diametre in position made of gun metal complete.

ITEM No. 258 :- C.C. Foundation (16.3.7) Making cement concrete foundation in 1:3:6 cement concrete, (20 to 25) millimetre stone metal duly plastered with necessary curing for complete. (pole muffing or any other purpose).

ITEM No. 259 :- Octagonal pole (8.3.14) Providing and erecting 7 metre high (clear height) galvanised octagonal pole with foundation bolts having bottom of 130 mm A / F, top 70 mm A / F on provided foundation as per specification.

ITEM No. 260 :- Sword Bracket (8.3.30) Providing and erecting galvanised 1000 millimetre single arm sword type bracket with FRP dome and ball as per specification.

ITEM No. 261 :- Iron Work (6.1.19) Supplying and erecting iron, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority.

ITEM No. 262 :- PVC Arm. Cable 4x6 sq.mm. (7.1.27) Supplying, erecting and terminating XLPE armoured cable 4 core 6 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands and lugs, on wall / trusses / pole or laid in provided trench / pipe as per specification.

ITEM No. 263 :- D.W.C. (7.6.9) Supplying and laying (including excavation of suitable width and depth up to 90 centimetre) 50 millimetre outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground / road surface, to required depth complete.

ITEM No. 265 :- LED Street Light Fitting (2.5.7) Supplying and erecting LED street light fitting suitable for above75W - 90W lamp, including lamp, with PF > 0.95 class IP 65 and above housing of pressure die cast aluminium alloy and heat sink extruded aluminium complete per specification.

ITEM No. 266 :- 3 Core Flexible Cable (1.3.28) Supplying and erecting PVC insulated PVC round sheathed 2.5 sq.mm (50 no. x 0.25 mm dia.) 3 core flexible multi stranded copper Industrial cable for voltage grade up to 1.1 kV

ITEM No. 267 :- SPMCB 6 A to 32 A (5.3.3) Supplying, erecting and marking SPMCB 6A to 32A, B- series (for lighting) in provided distribution board as per specification.

ITEM No. 268 :- Pipe Type Earthing (9.1.4) Providing pipe type earthing with 40 millimetre diametre G.I. pipe or 20 millimetre diametre G.I. Rod complete with all materials as per specification.

ITEM No. 269 :- (6.1.10) Supplying and erecting hylam sheet / ebonite 6 millimetre thick for covering wall entries including cutting, drilling and fixing with nut bolts / screws etcetera complete.

ITEM No. 270 :- Neitral link (5.10.22) Supplying and erecting 415V 16A porcelain base neutral link complete erected in provided MS box complete

ITEM No. 271 :- C.C. Foundation (16.3.9) Making M-20 grade reinforced cement concrete foundation by considering the safe soil bearing capacity at site as 10 T / sq.m at 1.5 m depth including supply of steel, concrete, excavation and fixing provided nut bolts with the help of template, duly plastered as per design complete (for 6 metre to 8 metre high octagonal / conical GI pole).

ITEM No. 272 :- Core Cutting (3.11.77) Carrying out core cutting of size 3" to 5" diametre X 15" length in the C.C. / rock / stone wall with the help of specialized core cutting machine in proper manner and finishing the site as original.

ITEM No. 273 :- (13.8.2) Supplying, installing, testing and commissioning optical type smoke detector complete on box as per specification.

ITEM No. 274 :- (13.8.1) Supplying, installing, testing and commissioning heat detector complete on box as per specification.

ITEM No. 275 :- Manual call Point (13.8.5) Supplying, installing, testing and commissioning manual call point (Pill box) with break glass push button in metal enclosure complete as per specification.

ITEM No. 276 :- Hooters (13.8.6) Supplying, installing, testing and commissioning hooters with CRCA enclosure complete as per specification.

ITEM No. 277 :- (13.8.7) Supplying, installing, testing and commissioning remote response indicators complete as per specification.

ITEM No. 278 :- XLPE arm. Cable 2x1.5 sq.mm (13.8.8) Supplying, installing, testing and commissioning FR, XLPE armoured cable 2 core 1.5 sq.mm. copper conductor complete erected on wall / ceiling complete as per specification.

ITEM No. 279 :- (13.8.9)Supplying, installing, testing and commissioning FR, XLPE armoured cable 4 core 1.5 sq.mm. copper conductor complete erected on wall / ceiling complete as per specification.

ITEM No. 280 :- (13.8.10) Supplying, installing, testing and commissioning FR, XLPE armoured cable 8 core 1.5 sq.mm. copper conductor complete erected on wall / ceiling complete as per specification.

ITEM No. 281 :- FACP (13.8.12) Supplying, installing, testing and commissioning of 10 Zones Microprocessor based conventional fire alarm control panel (FACP) with standard accessories complete as per specification.

ITEM No. 282 :- (13.8.13) Supplying, installing, testing and commissioning 2 Zone, local signal control panel (LCP) with standard accessories complete as per specification.

ITEM No. 283 :- (13.10.1) Supplying, erecting, testing and commissioning of 15 millimetre diametre NBCM Body chrome finished quartzoid bulb sprinkler having 68º C fixed temperature rating with deflector disc of conventional construction complete as per specification.

ITEM No. 284 :- (13.5.4) Supplying and erecting G.I. pipe above ground of ‘C’ class ERW of size 65 millimetre diametre with necessary fittings complete as per specification.

ITEM No. 285 :- G.I. Pipe (13.5.6) Supplying and erecting G.I. pipe above ground of ‘C’ class ERW of size 100 millimetre diametre with necessary fittings complete as per specification.

ITEM No. 286 :- G.I. Pipe (13.5.7) Supplying and erecting G.I. pipe above ground of ‘C’ class ERW of size 150 millimetre diametre with necessary fittings complete as per specification.

ITEM No. 287 :- Carbon Dioxide (10.2.34) Supplying and erecting Carbon Dioxide (CO2) fire extinguisher of 4.5 kg. capacity cartridge type conform to IS 2878 / 15683 complete erected with necessary clamp made from 50 x 6 millimetre M. S. flat with nut and bolts grouted in wall complete.

ITEM No. 288 :- Fire Extinguisher (10.2.36) Supplying and erecting ABC powder type fire extinguisher as per IS : 13849 / 15683 of 6 kg capacity with necessary clamp for erection on wall.

ITEM No. 289 :- G.I. Pipe (13.5.2) Supplying and erecting G.I. pipe above ground of ‘C’ class ERW of size 25 millimetre diametre with necessary fittings complete as per specification.

ITEM No. 290 :- G.I. Pipe 32 Sq.mm. (16.5.10) Supplying and erecting ISI mark GI pipe 32 millimetre diametre ‘C” class at position with accessories complete. Specification.

ITEM No. 291 :- Fire Bucket (10.2.25) Providing Floor mounting stand for keeping 4 Nos. of FIRE buckets 1500 millimetre in length, 900 millimetre in height frame made out of 30 X 30 X 4 millimetre angle iron with cross supports for legs, welded with 4 hooks and duly painted with one coat of red lead and two coats of silver paint complete.

ITEM No. 292 :- Fire Bucket (10.2.24) Providing Round bottom fire bucket of 9 Litres capacity as per IS : 2546 made out of 24 gauge G.I. sheet with extra handle at bottom duly painted white inside and red outside with FIRE Mark, on provided stand / wall hook complete.

ITEM No. 293 :- 65 millimetre pipe (13.5.4) Supplying and erecting G.I. pipe above ground of ‘C’ class ERW of size 65 millimetre diametre with necessary fittings complete as per specification.

ITEM No. 294 :- Butterfly Valve (13.6.16) Supplying and erecting cast iron double flange butterfly valve of size 100 millimetre diametre complete as per specification.

ITEM No. 295 :- (13.6.14) Supplying and erecting cast iron double flange butterfly valve of size 65 millimetre diametre complete as per specification.

ITEM No. 296 :- (13.6.17) Supplying and erecting cast iron double flange butterfly valve of size 150 millimetre diametre complete as per specification.

ITEM No. 297 :- (13.6.21) Supplying and erecting cast iron double flange NRV of size 150 millimetre diametre complete as per specification.

ITEM No. 298 :- NRV (13.6.20) Supplying and erecting cast iron double flange NRV of size 100 millimetre diametre complete as per specification.

ITEM No. 299 :- Valve (13.6.28) Supplying and erecting gun metal gate valve of size 25 millimetre diametre complete as per specification.

ITEM No. 300 :- (13.6.31) Supplying and erecting stainless steel single outlet hydrant valve fitted with necessary accessories complete as per specification.

ITEM No. 301 :- Hose Reel Drum (13.7.2) Supplying and installing wall mounting swinging Hose reel drum fitted with 19 millimetre diametre 30 metre long high pressure polypropylene (Polyhose) fitted with necessary accessories complete as per specification.

ITEM No. 302 :- R.R.L. Hose Pipe (13.7.4) Supplying fire fighting reinforced rubber lined (R.R.L.) hose pipe, 63 millimetre diametre, 15 metre in length, fitted with necessary accessories complete as per specification.

ITEM No. 303 :- (13.7.20) Supplying and erecting M.S. / CRCA cabinet for housing Floor Hydrant valve, hose pipe, hose reel and branch pipe (size 1000 x 736 x 736 millimetre) made from 16 SWG sheet and angle iron 25 x 25 x 4 millimetre having front doors with viewing glass (8"x6") and locking arrangement with necessary fixing material such as rubber bidding etc. duly painted in post box red colour.

ITEM No. 304 :- (13.7.7) Supplying and erecting gun metal branch pipe of 63 millimetre diametre fitted with 20 millimetre diametre detachable hexagonal nozzle complete as per specification.

ITEM No. 305 :- Fire Brigade Header (13.7.10) Supplying and erecting fire brigade header of 150 millimetre diametre, for supplying water in fire tank complete as per specification.

ITEM No. 306 :- (13.7.11) Supplying and erecting fire brigade header (Siamese connection) of 150 millimetre diametre for supplying water to wet riser system complete as per specification.

ITEM No. 307 :- Air Release Cock (13.7.13) Supplying and erecting 20 / 25 millimetre diametre gun metal air release cock, with necessary G.I. coupling to be fitted on top of air vessel or on wet riser complete as per specification.

ITEM No. 308 :- Pressure Gauge (13.7.14) Supplying and installing pressure gauge of 100 millimetre diametre, 0-300 PSI or 0-14 kg per cm square fitted with 12 / 15 millimetre diametre pad cock valve, and G.I. pipe, elbow etcetera complete as per specification.

ITEM No. 309 :- Pressure Switch (13.7.15) Supplying and installing pressure switch with 12 / 15 millimetre diametre isolation valve, G. I. nipple, elbow, etcetera complete as per specification.

ITEM No. 310 :- Wrapping (13.5.9) Providing coating of bitumen paint and 4 millimetre thick wrapping for underground 100 millimetre ring main of fire fighting system.

ITEM No. 311 :- Excavating (16.1.5) Excavating hard Rock or bituminous road by chiselling for preparing pit for pole / stay / earth plate / for laying cable / pipe and clearing the site by removing debris and making the site as required complete.

ITEM No. 312 :- C. C. Foundation (16.3.7) Making cement concrete foundation in 1:3:6 cement concrete, (20 to 25) millimetre stone metal duly plastered with necessary curing for complete. (pole muffing or any other purpose).

ITEM No. 313 :- Fire Pump (13.1.1) Supplying, installing, testing and commissioning with perfect aligning, proper levelling of fire service main single stage pump, of 1400 LPM at 56 metre head centrifugal type, 30 HP (22 kW), 3 phase, 415 volt, 50Hz or of suitable HP complete, as per specification.

ITEM No. 314 :- (13.3.1) Supplying, installing, testing and commissioning with perfect aligning, proper levelling of jockey pump of 240 LPM at 56 m head, 15 HP (11 kW), 3 phase, 415 volt, 50Hz or of suitable HP with suitable stages as per specification.

ITEM No. 315 :- Booster pump (13.4.1) Supplying, installing, testing and commissioning with perfect aligning, proper levelling of booster pump of 180 LPM at 40 metre Head, 5 HP (3.75 KW), 3 phase, 415 volt, 50Hz or of suitable HP with suitable stages as per specification.

ITEM No. 316 :- Water Tank (13.7.1) Supplying and installing one piece moulded HDPE / fibre water tank for negative suction only, having capacity 1000 litres fitted with necessary accessories complete as per specification.

ITEM No. 317 :- C.R.C.A. Sheet (6.1.1) Supplying and erecting metal work in CRCA sheet with fabrication of boxes, panel boards, etc. including cutting, bending, drilling, welding, riveting, treated with anti-rust treatment and duly powder coated or painted with one coat of red lead paint and 2 coats of enamel paint complete.

ITEM No. 318 :- Iron Work (6.1.19) Supplying and erecting iron, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority.

ITEM No. 319 :- Prewired Meter (5.7.17) Providing and erecting prewired meter module suitable for MCCB panel board with CT's and emf's VIF meter complete.

ITEM No. 321 :- MCB FP 6A to 32A (5.3.16) Supplying, erecting and marking FPMCB 6A to 32A in provided distribution board as per specification.

ITEM No. 322 :- MCCB 4 Pole (5.5.1) Providing and erecting 4 Pole MCCB upto 100A, 415V, with short circuit rating 25 kA (Ics=100% of Icu), adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt / UV / trip alarm contact and MCCB should have phase barriers both sides, in provided enclosure on iron / GI frame as per specification.

ITEM No. 323 :- MCCB 4 Pole (5.5.2) Providing and erecting 4 Pole MCCB of 200A,415V capacity with short circuit rating 25 kA (Ics=100% of Icu) adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt / UV / trip alarm contact and MCCB should have phase barriers both sides, in provided enclosure on iron / GI frame as per specification.

ITEM No. 324 :- (12.4.23) Supplying and erecting automatic control panel for 3 Ph, 415 volt, A.C. Submersible / centrifugal pump set upto 30 HP consisting of Star Delta starter having relay range 30-50 Amp, S.P.P., Combined ammeter / voltmeter, phase indicating lamp enclosed in CRCA powder coated Vibration proof enclosure with IP 54 protection. Control Panel should offer single phasing, phase reversal, phase imbalance etcetera.

ITEM No. 325 :- (12.4.22) Supplying and erecting automatic control panel for 3 Ph, 415 volt, A.C. Submersible / centrifugal pump set upto 20 HP consisting of Star Delta starter having relay range 28-42 Amp, S.P.P., Combined ammeter / voltmeter, phase indicating lamp enclosed in CRCA powder coated Vibration proof enclosure with IP 54 protection. Control Panel should offer single phasing, phase reversal, phase imbalance etcetera.

ITEM No. 326 :- Automatic Control Panel (12.4.17) Supplying and erecting automatic control panel for 3 Ph, 415 volt, A.c. Submersible / centrifugal pump set upto 7.5 HP consisting of DOL starter having relay range 9-14 AMP,S.P.P., Combined ammeter / voltmeter, phase indicating lamp enclosed in CRCA powder coated Vibration proof enclosure with IP 54 protection. Control Panel should offer single phasing, phase reversal, phase imbalance etcetera

ITEM No. 327 :- Arm. Cable 3 1 / 2x70 (7.1.18) Supplying, erecting and terminating XLPE armoured cable 3½ core 70 sq. mm. aluminium conductor with continuous 8.35 sq. mm. (10 SWG) G.I. earth wire complete erected with glands and lugs, on wall / trusses / pole or laid in provided trench / pipe as per specification.

ITEM No. 328 :- Arm. cable 3 1 / 2x35 sq.mm. (7.1.16) Supplying, erecting and terminating XLPE armoured cable 3½ core 35 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands and lugs, on wall / trusses / pole or laid in provided trench / pipe as per specification.

ITEM No. 329 :- 3 Core Flexible Cable (1.3.28) Supplying and erecting PVC insulated PVC round sheathed 2.5 sq.mm (50 numbers X 0.25 millimetre diametre) 3 core flexible multi stranded copper Industrial cable for voltage grade up to 1.1 kV.

ITEM No. 330 :- 3X4 sq.mm arm cable (7.1.10) Supplying, erecting and terminating XLPE armoured cable 3 core 4 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands and lugs, on wall / trusses / pole or laid in provided trench / pipe as per specification.

ITEM No. 331 :- PVC Conduit 32 millimetre (1.2.8) Supplying and erecting HMS PVC conduit 32 millimetre diametre with PVC accessories on wall / ceiling as per specification.

ITEM No. 332 :- Plate Earthing (9.1.1) Providing earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing and recording the results as per specification.

ITEM No. 333 :- Submersible Pump Set (12.3.4) Supplying and erecting submersible pump set suitable for erection on open well of 5.625 KW / 7.5 HP with 415 V 50 c / s.A.C. supply, having delivery head from 36 to 18 m and discharge from 400 to 1000 Ltrs. per minute (Max efficiency at 29 metre head and 680 Ltr discharge) and pipe of Suction 75 millimetre /Delivery 65 millimetre diameter erected with necessary H type clamps as per specification.

ITEM No. 334 :- G. I. Pipe 50 millimetre (16.5.6) Supplying and erecting ISI mark GI pipe 50 millimetre diametre ‘B’ class at position with accessories complete as per Specification.

ITEM No. 335 :- Non Return Valve 50 mm (16.6.21) Supplying and erecting non return valve 50 millimetre diametre in position made of gun metal complete.

ITEM No. 336 :- Flat Cable 3x4 sq.mm. (12.4.9) Supplying and erecting flat flexible 3 core 4 sq mm PVC sheathed submersible type copper cable suitably clamped at fixed intervals with column pipe assembly complete.

ITEM No. 337 :- PVC Conduit 32 mm (1.2.8) Supplying and erecting HMS PVC conduit 32 millimetre diametre with PVC accessories on wall / ceiling as per specification.

ITEM No. 338 :- Automatic Control Panel (12.4.17) Supplying and erecting automatic control panel for 3 Ph, 415 volt, A.c. Submersible / centrifugal pump set upto 7.5 HP consisting of DOL starter having relay range 9-14 AMP,S.P.P., Combined ammeter / voltmeter, phase indicating lamp enclosed in CRCA powder coated Vibration proof enclosure with IP 54 protection. Control Panel should offer single phasing, phase reversal, phase imbalance etcetera

ITEM No. 339 :- FPMCB (5.3.17) Supplying, erecting and marking FPMCB 40A to 63A in provided distribution board as per specification

ITEM No. 340 :- Change Over (5.1.25) Supplying and erecting four pole metal clad ON LOAD change over switch 415V, 63A erected on angle iron / GI frame complete.

ITEM No. 341 :- MCB TP 40 A to 63 A (5.3.15) Supplying, erecting and marking TPMCB 40A to 63A in provided distribution board as per specification.

ITEM No. 342 :- MCB Enclosures (5.4.23) Supplying and erecting CRCA sheet metal one way enclosures suitable for DP MCB / TP MCB / FP MCB erected on angle iron / GI frame complete.

ITEM No. 343 :- Iron Work (6.1.19) Supplying and erecting iron, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority.

ITEM No. 344 :- Plywood (6.1.12) Supplying and erecting plywood 12 millimetre thick fixed to wall or on provided panel board with necessary materials such as screws, wall fasteners supports, nuts bolts etcetera complete.

ITEM No. 345 :- Plate Earthing (9.1.1) Providing earthing with galvanized iron earth plate size 60 x 60 x 0.6 centimetre complete with all materials, testing and recording the results as per specification.

ITEM No. 346 :- SITC of Electric Traction Passenger Lift with - Rated capacity :- 6 Passenger / 408 Kg - Floors :- G+1 floor (2Stops / 2 Landings) - Travel :- 3 to 4.2 mtrs - Location of Lift Machine:- MR / MRL - Rated speed :- 1.0mps VS - Doors type :- COPO / TOPO Doors with frame having clear opening of 800 millimetre wide x 2000 millimetre high made from SS 304 grade sheet of 1.5 millimetre, thick in hairline finish for car and all landing doors with SS door architraves / frames - Lift car enclosure made from SS 304 grade sheet of 1.5 millimetre, thick with hairline finish with frame made from MS girders, bracing of adequate size with minimum safety factor of 5, with Toe Guard Apron, with necessary false ceiling with adequate LED lights, blower / fan for ventilation and SS chequered plate flooring, handrails, mirror, emergency light etcetera - COP with SS face plate having metallic push buttons with Braille Code and luminous indicator around button with FPI, scrolling UP / DN LED indicator and with / without attendant key switch, OWD with audio-visual alarm, VAS in Marathi, Hindi and English with intercom system with telephone instrument in Lift car, LMR and FCC / ground floor - Clear Car size of 1100 millimetre wide x 1000 millimetre deep x 2000 millimetre high - LOP with SS face plate having recess / surface push button box for all landings with scrolling UP / DN LED indicator having metallic push buttons with Braille Code and luminous indicator around button with CPI, Lift car arrival and next travel direction audio-visual indication at all landings - Lift controller based on microprocessor / PLC with VVVF Drive having closed loop control system, with IBMS compatible having necessary port, control panel duly wired with proper size and strength copper wire for power and control circuit, with provision for addition of floor / control card and allied accessories control panel having enclosure of 1.5 millimetre CRCA sheet with powder coating with IP54 Protection class - ARD complete with necessary SMF VRLA batteries - Fireman controller having fireman switch at fire Landing, - CCTV surveillance system comprises of 2 numbers minimum 2.0MP FHD IP based vandal proof Dome camera in lift car and in LMR / inside lift shaft top aimed on Lift machinery and controller with NVR kept in LMR / FCC with HDR data backup for 60 days with 18" FHD TV monitor, to be kept in FCC / LMR as directed by Engineer In Charge. - Lift Machine of Gearless PMSM of suitable kW with Traction pulley, OSG, electromagnetic brakes, entire assembly mounted on adequate size girders duly fixed on LMR floor / shaft walls complete with main / diverter traction sheaves, suspension wire ropes / belts of adequate size and strength - Other mechanical parts such as 'T' section adequate size guide rails for car and counter weight with brackets fasteners, counter weight frame with necessary blocks, buffers with necessary support arrangement, MS pit ladder etcetera erected with necessary steel work - Minor civil work for alteration if any and erection of door frames and accessories, erection buffers, erection of lift machinery, adequate size core cuts if required and scaffolding for erecting guide rails fixing of girders for mounting lift machine etcetera complete as per specification. - Lift shaft available having clear size of 1900 millimetre wide X 1700 millimetre deep, 1600 millimetre Pit depth, 4600 millimetre overhead. 1) General: - Job includes entire procedure of obtaining all necessary erection permissions and "License to Work the Lift" from Electrical Inspector (Lifts) with submission to the Engineer In Charge. 2) Warrantee - Job covers three years onsite warrantee for all the Lift parts with FCAMC as per the maintenance schedule.

ITEM No. 347 :- A2) For Lift having 800 millimetre wide X 2000 millimetre high clear entrance in 1.5 millimetre thick SS 304 grade landing door [Two panel], this includes all necessary accessories like LOP's with UP / DN buttons-arrows-indicators, extension of guide rails, shaft wiring with trunking, traveling cables, main hoisting ropes / belts, and OSG rope landing doors with all accessories etc. necessary for the normal safe functioning of lift installation complete. (4 lift x 3 upper floor = 12 floor)

ITEM No. 348 :- C1) For Lift travelling above First floor and up to Sixth floor ( 4 lift x 1 number)

ITEM No. 349 :- D) For additional 2MP Camera along with necessary accessories at Home Landing, add as given (4 lift x 2 numbers)

ITEM No. 350 :- F)For vision panel having Size 100 millimetre wide X 200 millimetre high covered with fire rated laminated glass, having punched Jali as a part of the door panel SS sheet itself. (4 lift X 5 floors X 2 numbers = 40 numbers + car cabin = 4 X 2 = 8 Number – Total = 48 Numbers)

ITEM No. 351 :- VTPNDB 4 way (5.4.25) Supplying and erecting triple pole and neutral distribution board (TPNDB) with door surface / flush mounted suitable for 3 pole MCCB as incomer and outgoing SP MCB (12 poles) or TP MCB of 4 ways (12 poles) on iron / GI frame. (vertical busbar type) as per specification.

ITEM No. 352 :- SPNDB (5.4.18) Supplying and erecting single pole and neutral distribution board (SPNDB) with door surface / flush mounted with 2 ways for incoming and 6 ways for outgoing SP MCB’s on iron / GI frame as per specification.

ITEM No. 353 :- SPNDB (5.4.17) Supplying and erecting single pole and neutral distribution board (SPNDB) with door surface / flush mounted with 2 ways for incoming and 2 ways for outgoing SP MCB’s on iron / GI frame as per specification.

ITEM No. 354 :- MCCB 4 Pole (5.5.1) Providing and erecting 4 Pole MCCB upto 100A, 415V, with short circuit rating 25 kA (Ics=100 % of Icu), adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt / UV / trip alarm contact and MCCB should have phase barriers both sides, in provided enclosure on iron / GI frame as per specification.

ITEM No. 355 :- MCB TP 40 A to 63 A (5.3.15) Supplying, erecting and marking TPMCB 40A to 63A in provided distribution board as per specification.

ITEM No. 356 :- Cable 2x4 sq.mm. (7.2.9) Supplying, erecting and terminating XLPE armoured cable 2 core 4 sq mm copper conductor continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands and lugs, on wall / trusses / pole or laid in provided trench / pipe as per specification.

ITEM No. 357 :- (Cable 4x10 sq.mm. (7.2.33) Supplying, erecting and terminating XLPE armoured cable 4 core 10 sq. mm. copper conductor continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands and lugs, on wall / trusses / pole or laid in provided trench / pipe as per specification.

ITEM No. 358 :- SPMCB 6 A to 32 A (5.3.2) Supplying, erecting and marking SPMCB 6A to 32A, C-series (for motor / power) in provided distribution board as per specification.

ITEM No. 359 :- SPMCB 6 A to 32 A (5.3.3) Supplying, erecting and marking SPMCB 6A to 32A, B- series (for lighting) in provided distribution board as per specification.

ITEM No. 360 :- MCB DP (5.3.6) Supplying, erecting and marking DPMCB 6A to 32A, C- series (for motor / power) in provided distribution board as per specification.

ITEM No. 361 :- RCCB 2 pole 40A (5.6.2) Providing, erecting and commissioning 2 pole RCCB only of electromagnetic type with 30 / 100 / 300 mA sensitivity and having capacity of 40A complete as per specification.

ITEM No. 362 :- RCCB (5.6.6) Providing, erecting and commissioning 4 pole RCCB of electromagnetic type with 30 / 100 / 300 mA sensitivity and having capacity of 63A complete as per specification.

ITEM No. 363 :- CRCA Sheet (5.6.9) Supplying and fixing CRCA sheet Box with earthing terminals for housing 2 Pole RCCB on iron frame / laminated board complete.

ITEM No. 364 :- CRCA Sheet (5.6.10) Supplying and fixing CRCA sheet Box with earthing terminals for housing 4 Pole RCCB on iron frame / laminated board complete.

ITEM No. 365 :- LED Bulk Head (2.1.21) Supplying and erecting decorative oval bulk head edge-lit 10W LED luminaire comprising of high brightness LED Fitting on provided PVC block / wooden board.

ITEM No. 366 :- LED Tube (2.1.23) Supplying and erecting LED 20W tube light fitting (4 feet) with aluminium housing, heat sink, integrated HF electronic driver complete.

ITEM No. 367 :- Exhaust Fan (2.12.15) Supplying and erecting exhaust fan medium duty 230 V A.C. 50 cycles 225 millimetre 1400 RPM with condenser complete erected in position with necessary materials. Fan motor with moisture proof treatment and ‘E’ class insulation.

ITEM No. 368 :- Point wiring (1.9.25) Point wiring in PVC trunking (casing-capping) with 1.5 sq.mm (2+1E) FR grade copper wire, modular type switch, earthing and required accessories as per specification.

ITEM No. 369 :- Mains 2x1.5 sq.mm. (1.3.1) Supplying and erecting mains with 2x1.5 sq.mm F.R copper PVC insulated wire laid in provided conduit / trunking / inside pole / Bus bars or any other places as per specification.

ITEM No. 370 :- PVC Conduit 25 millimetre (1.2.7) Supplying and erecting HMS PVC conduit 25 millimetre diametre with PVC accessories on wall / ceiling as per specification.

ITEM No. 371 :- PVC Trunking 32 mm (1.2.11) Supplying and erecting PVC trunking (PVC casing-n-capping) of size 32 mm with accessories on wall / ceiling as per specification.

ITEM No. 372 :- Modular Switch 6 A (1.8.1) Supplying and erecting ISI mark modular type switch 6A / 10A duly erected on provided plate and box with wiring connections complete.

ITEM No. 373 :- Modular Switch 16 A (1.8.2) Supplying and erecting ISI mark modular type switch 16A duly erected on provided plate and box with wiring connections complete.

ITEM No. 374 :- Modular Socket 16 A (1.8.10) Supplying and erecting ISI mark modular type 3 pin 6A multi sockets with safety shutter, duly erected on provided plate and box with wiring connections complete.

ITEM No. 375 :- Modular Box 4 way (1.8.29) Supplying and erecting PVC Surface modular switch box with double mounting plate for 4 modules duly erected.

ITEM No. 376 :- Mains 2x2.5 sq.mm. (1.3.3) Supplying and erecting mains with 2x2.5 sq.mm F.R copper PVC insulated wire laid in provided conduit / trunking / inside pole / Bus bars or any other places. as per specification.

ITEM No. 377 :- Mains 1x1.5 sq.mm. (1.3.1) Supplying and erecting mains with 2x1.5 sq.mm F.R copper PVC insulated wire laid in provided conduit / trunking / inside pole / Bus bars or any other places as per specification.

ITEM No. 378 :- Plate Earthing (9.1.1) Providing earthing with galvanized iron earth plate size 60 x 60 x 0.6 centimetre complete with all materials, testing and recording the results as per specification.

ITEM No. 379 :- G.I. Strip (9.2.3) Supplying and erecting GI strip of required size used for earthing on wall and / or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint in an approved manner with joints required as per specification.

ITEM No. 380 :- 125 KVA D.G. Set (11.1.13) Supplying, erecting and commissioning of diesel generating set with alternator of 125 kVA output continuous rating, 3 phase, 415 V, 50 c/s 0.8 p. f. A.C a totally enclosed air cooled / liquid cooled multi-cylinder diesel engine developing suitable BHP at 1500 rpm with 10% overload for 1 hour in 12 hours, along with standard accessories, self-excited, self-regulated, screen protected alternator with static excitation system running at 1500 RPM as per IS 4722-2001 with voltage regulation +/- 5 %. Both the engine and alternator direct coupled on a common fabricated steel base frame and mounted on anti-vibrating pads with standard control panel comprising meters, switchgears, indicators connected with suitable wires / cables, the complete set enclosed in composite Acoustic enclosure as fully assembled integral unit made of 16 SWG CRCA Sheet, sound absorbing material to restrict sound level upto 75 dB at 1.0 metre, provided with first filling of oil, diesel etcetera as per specification.

ITEM No. 381 :- AMF Panel (11.2.11) Supplying, erecting, testing and commissioning of Microprocessor based AMF panel suitable for diesel generating set of above above 125 kVA to capacity Single / Three phase, 230 / 415 Volts, 50Hz A.C. with all standard features, safeties etc as per specification.

ITEM No. 382 :- C. C. Foundation (16.3.7) Making cement concrete foundation in 1:3:6 cement concrete, (20 to 25) millimetre stone metal duly plastered with necessary curing for complete. (4 X 2 X 2 metre = 16 cubic metre + 22.8 X 0.3 X 0.3 = 2 Cubic metre = 18 Cubic Metre)

ITEM No. 383 :- Excavating (16.1.7) Excavating soft murum / soft soil road by chiselling for preparing pit for poles stay or earth plates or for laying cables, pipes and clearing the site by removing debris and making the site good complete. (4 x 2 x 2 metre = 16 Cubic Metre)

ITEM No. 384 :- Copper earth Plate (9.1.2) Providing earthing with copper earth plate size 30 x 30 x 0.315 cm complete with all materials, testing and recording the results as per specification.

ITEM No. 385 :- Iron Work (6.1.19) Supplying and erecting iron, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority. (45 X 45 X 5 millimetre angle @ 3 kg / metre = 10 metre X 3 = 30 kilogram)

ITEM No. 386 :- Arm. Cable 3 1 / 2 X 120 (7.1.20) Supplying, erecting and terminating XLPE armoured cable 3½ core 120 sq. mm. aluminium conductor with continuous 12.97 sq. mm. (8 SWG) G.I. earth wire complete erected with glands and lugs, on wall / trusses / pole or laid in provided trench / pipe as per specification.

ITEM No. 387 :- D.W.C. Pipe (7.6.11) Supplying and laying (including excavation of suitable width and depth up to 90 cm) 90 millimetre outside diametre double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground / road surface, to required depth complete.

ITEM No. 388 :- Stone Metal 25 millimetre (16.2.3) Supplying and spreading stone metal 25 millimetre size for 100 millimetre depth above the ground level complete. (4.8 metre X 6.6 metre = 31.68 Square Metre - 4 X 2 = 8 Square = 23.68 Square Metre)

ITEM No. 389 :- Fencing (10.2.18) Supplying and erecting fencing of section having size 2450 millimetre in height from ground level and 1200 millimetre width with angle iron frame work erected in CC foundation and painted complete as per specification.

ITEM No. 390 :- Double door (10.2.20) Supplying and erecting double leaf hinged door each 1500 millimetre in width X 1850 millimetre in height using B class, GI pipe with angle iron supports, chain link wire mesh (jali) complete supported on channel iron, erected in foundation, and painted complete as per specification.

ITEM No. 391 :- Change over Switch (5.1.27) Supplying and erecting four pole metal clad ON LOAD change over switch 415V, 200A erected on angle iron / GI frame approved make complete.

Shubham EPC Private Limited

Sharda Construction and Corporation Pvt Ltd

Harsh Constructions Pvt Ltd