Constt. of Tourisam room/yatri shed suchara katta third call

Amount

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (Not exceeding 1.5 mtr in width) and for shafts, wells, cesspits and the like not exceeding 10sqm on plan, depth upto 1.5mtr. including disposal of excavated earth upto 1 mtr from cutting edge, disposed earth is to be levelled and neatly dressed in: All kinds of soil (Including all leads and lifts and all type of carriages by MT/HL)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size)(Including all leads and lifts and all type of carriages by MT/HL)

Random Rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level and curing complete with: Cement mortar 1:6 (1 Cement : 6 coarse sand)(Including all leads and lifts and all type of carriages by MT/HL)

Providing & laying damp-proof Course 50 mm thick with cement concrete 1:2:4 (1 cement:2 coarse sand: 4 graded stone agg 12.5 mm nominal size) and curing complete(Including all leads and lifts and all type of carriages by MT/HL)

Random Rubble masonry with hard stone in superstructure above plinth level and upto floor five level, including levelling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) and curing complete at window sills, ceiling level and the like Cement mortar 1:6 (1 Cement : 6 coarse sand)(Including all leads and lifts and all type of carriages by MT/HL)

Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete(Including all leads and lifts and all type of carriages by MT/HL)

Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.80 mm thick with zinc coating not less than 350 gram/m2(Including all leads and lifts and all type of carriages by MT/HL)

Providing GI Ridges/hips of 0.63mm thick GI sheets, fixed with 8m J/L hooks(Including all leads and lifts and all type of carriages by MT/HL)

Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade on old work (one or more coats(Including all leads and lifts and all type of carriages by MT/HL)

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 5.1.2 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)(Including all leads and lifts and all type of carriages by MT/HL)

Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level , Thermo-Mechanically Treated bars of grade Fe-500D or more.

50 mm thick cement concrete flooring in 1:2:4 mix with 20mm nominal size stone aggregate with neat coat of cement slurry.(Including all leads and lifts and all type of carriages by MT/HL)

Making plinth protection 50 mm thick of cement concrete 1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggreagate 20mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth.

20mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 6 ( 1 cement : 6 fine sand)(Including all leads and lifts and all type of carriages by MT/HL)

Centring and shuttering including struting propping removal

Foundations, footings, bases for columns

Lintel, beams, plinth beams, girders, bressumers and cantilevers

Coloumn

Providing and fixing strips in joints of terrazzo/ cement concrete floors. Glass strips 40 mm wide and 4 mm thick

Filling available excavated earth in trenches including ramming in layers not exceeding 20cm in depth

Supplying and filling in plinth with fine sand under floors including, watering, ramming, consolidating and dressing complete.(Including all leads and lifts and all type of carriages by MT/HL)

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately) Sal wood

Providing and fixing panelled or panelled and glazed shutters(35mm) for doors, windows and clerestory windows including lSI marked M.S. pressed Butt hinges bright finished of required size with necessary screws excluding panelling which will be paid for separately. 2nd class deodar

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick.Particle Board 12mm thick .Plain particle board flat pressed, 3 layer or graded wood particle board medium density Grade I, IS: 3087 marked

Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete: 2nd class deodar wood 50x12mm

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. Float glass panes 4 mm thick glass panes

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to bemeasured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. Fly proof stainless steel grade 304 wire guagewith 0.5 mm dia wire & 1.4 mm wide aperture withmatching wood beading

Painting steel work with deluxe multi surface paint of required shade to give an even shade. Two or more coats applied @ 0. 901itre/10sqm over an under coat of primer applied @ 0. 801itre/10sqm of approved brand and manufacturer

Painting wood work with deluxe multi surface paint of required shade. Two or more coats applied @ 0. 901itre/1 Osqm over an under coat of primer applied @ 0. 751itre/1 Osqm of approved brand and manufacture

Colour washing such as green blue or buff to give an even shade

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc including priming coat with approved steel primer all complete . Fixed to openin/wooden frames with rawl plug screws etc

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.

Group B

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

S/F modular boxes, base and cover plate :- Supplying and fixing following size/modules , GI box alongwith modular base & cover plate for modular switches in recess etc. as required.

S/F Modular type switch/socket : Supplying and fixing following modular switch / socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required

5/6Amp Switch

S/F 'C' series , SP MCB:- Supplying and fixing 5 amps to 32 amps rating, 240 Volts, 'C" series, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supply of Exhaust fanWall / Ceiling Fans 230V 50Hz celing fan with double ball bearing with low power consumption of following sweeps

Supply of LED batten 18W

Supply & fixing 25mm square core aluminium cable as req.

Sign board as per RDD specification including painting writing complete job