Loading
Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹6.3 Laccepted-aoc | accepted-aoc |
Tender Value
₹6.0 L
EMD Value
₹15,100
Closing Date
17 Dec 2025, 11:00 pmClosed
Karnataka Power Transmission Corporation Limited
Srinivas T
Providing 01 No of 11kV Switchgear (PCVCB) at 66/11kV B.Matakere Substation, KPTCL in SantheSaraguru Taluk, Mysore District -CALL-5
KPTCL/2025-26/SS/WORK_INDENT2302/CALL-3
KPTCL/2025-26/SS/WORK_INDENT2302/CALL-3
Open
Sub-Station
Two Tender Document System(Two Cover)
KPTCL CEE Transmission Zone Office Mysuru
13 documents required · 13 mandatory
The Bidder shall be registered firm as Sole Proprietorship/Partnership/Pvt Ltd Company etc
For other than proprietorship, the Bidder shall furnish the registered partnership deed and Power of Attorney
Minimum Average Annual Turnover (MAAT) of the bidder for best one(01) year out of last preceding five financial years, shall not be less than Amount Put to Tender as per 3.2(a) of std tender documents(ITT).
Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under:Assessed Available Tender Capacity: (AxNx5-B)Where A-Maximum value of works executed (KPTCL & Non-KPTCL) in any one year during the last five years (updated to FY 2024-2025) taking into account the completed as well as works in progress. N-Number of years prescribed for completion of the works for which tenders are invited.B-Value, at FY 2024-2025 price level of existing commitments (KPTCL & Non-KPTCL)and on-going works (KPTCL & Non-KPTCL) to be completed during the next 1(One)year.Note:(i)The statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the works listed should be countersigned by the Employer in charge, not below the rank of an Executive Engineer or equivalent.(ii)A self-declaration is to be uploaded by the Tenderer stating that the information with regard to assessed available tender capacity (Works on Hand) furnished are correct.
Reports on the financial standing of the tenderer, such as profit and loss statements and auditors reports for the last five years as per 3.10(iv) of ITT.
valid Super grade Electrical Contractor License issued by the Government of Karnataka as on the date of opening of techno-commercial bid (refer 2.3 of ITT)
Even though the Tenderers meet the above criteria, they are subject to be disqualified if they have:- Made misleading or false representations in the forms, statements and attachments submitted in proof of the qualification requirements and/or- Record of poor performance such as abandoning the works, not properly completing the contract, inordinate delays in completion, litigation history, or financial failures etc. and/or- Participated in the previous Tender for the same work and had quoted unreasonably high Tender prices and could not furnish rational justification.
Bidder shall ensure that soft copies of Power of Attorney, Letter of Undertaking, No Deviation CERTIFICATE as revised in Annexure , Any other undertaking / agreement (if applicable) are to be uploaded besides submitting the Originals to the office of the Chief Engineer, Electy., Operation, KPTCL, Mysuru, after the last submission date and on or before the date and time of opening of techno commercial bids
Bidder shall ensure that soft copies of i. Letter of undertaking for Non performance ii. Letter of undertaking for Risk and Cost iii. Letter of undertaking for Litigation iv. Letter of undertaking to source the supply of equipment material from KPTCL approved Vendors only (if applicable) are uploaded besides submitting the Originals to the office of the Chief Engineer, Electy., Operation, KPTCL, Mysuru, after the last submission date and on or before the date and time of opening of techno commercial bids as per 3.10(xviii) of ITT
i. Letter of undertaking to source the equipment/material for the work from the approved Vendors who meet the eligibility clauses regarding restrictions on procurement from a country which shares a land border with India (Annexure-XVI) ii. Letter of undertaking as per clause No.1.5 of Annexure-XVII iii. Letter of undertaking as per clause No.1.6 of Annexure-XVII (if applicable) are uploaded besides submitting the Originals to the office of the Chief Engineer, Electy., Operation, KPTCL, Mysuru, after the last submission date and on or before the date and time of opening of techno commercial bids.
ESI certificate
EPF Certificate
Shall upload valid GST Certificate and PAN copy
₹500
₹15,100
17 Dec 2025
3 Dec 2025
19 Dec 2025
15 Dec 2025
Providing 01 No 11kV PCVCB Switchgear at 66/11 kV B.Matakere Substation, Saraguru Taluk, Mysuru District- CALL3-Supply
Drake conductor
Coyote conductor
RCC Pole - 9.5 Mtr Long, 350 Kg WL for Bus ODS
11KV 90KN disc insulator
Bolted type tension clamp for Single Drake ACSR Conductor 120 kN, 20 mm
Bolted type tension clamp for Single Coyote ACSR Conductor 70/90 kN, 16 mm
Bolted Type Suspension Clamp Single Coyote ACSR Conductor 70/90 kN, 16 mm
Beam out of channel 100x50 with arrangements for stringing power conductor on 11kV side (including bolts and nuts )1B2 station structure
Pad clamp coyote
PG Clamp for Coyote to Rabbit
C - Type Wedge Connectors Drake to coyote ACSR Conductor
C - Type Wedge Connectors Coyote to coyote ACSR Conductor
DP Structure with RCC Pole - 9 Mtr Long, 145 Kg WL
H frame for mouting GOS Set ( GI )
11 kV, 400 Amps Double Break GOS
9kV,10KA Lightning arrestor
Copper Earth Bond 450 mm long
PVC Insulation Tapes19 mm wide and in rolls of 10 Mtrs
PVC bend and T s of different sizes
RCC pole clamp-GI for running GI flat at DP and for holding PVC pipe at breaker structures
1.1 kV class Armoured Copper Cables :
19 Core 2.5 Sqmm
1.1 kV class Armoured Copper Cables :
4 Core 2.5 Sqmm
1.1 kV class Armoured Copper Cables :
4 Core 10 Sq mm
Cast Iron Pipe of 100mm ID 13 mm thickness 2.75 mtr long with 2 part clampout of G.I Flat 50x6 mm continuously welded around the pipe using casting iron welding
RCC Hume Pipe, 2000 mm Long, 150 mm Dia
for Duct connecting place
Multi Function Transducers(MFT)
As per KPTCL Std, Interface: RS-485 Daisy Chain to RTU Com port,wiring: Both 3ph 4wire, supply: self powered, Measuring range voltage: 120%, current: 120%, frequency: 4...
Input Vtg:110V DC, input indicated by LED, input range 110VDC to 140V DC, sourcing Vtg output 48VDC, No of iputs: 12, No of outputs: 8, Source current: 5mA, at output, 8way switch to be p...
Terminal Blocks (knife type)
Current Cable - 2.5 Sq-mm multistrand copper wire for CT termination
Voltage Cable - 2.5 Sq-mm multistrand copper wire for PT termination
Control Cable - 10 Copper core x 1.5sqmm
Signal Cable - 10 Copper core x 0.5sqmm
1.5 Sqmm Grey wire for interfacing of DI and DO
Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the size 2.5 sqmm
C-type channel of size 50x100x50x6mm
Supplying and fixing of heavy duty cable glands suitable for UG cable of 1.1 KV class (metal only)
(Size: 32mm dia)
CT TB's - 6 nos for each panel
Providing 01 No 11kV PCVCB Switchgear at 66/11 kV B.Matakere Substation, Saraguru Taluk, Mysuru District- CALL3-Erection
11 kV PCVCB Switchgear, 500 MVA, 25kA, 1250 A feeder
a) Erection, alignment and fixing including movement from the point of unloading to the point of erection
11 kV PCVCB Switchgear, 500 MVA, 25kA, 1250 A feeder
Testing & Commissioning:
Identification of wires, ferruling, crimping & termination of wires for annunciation, etc., Testing of relays, CTs, PTs, B...
RCC Pole - 9.5 Mtr Long, 350 Kg WL for Bus ODS
Busbar Formation
Main bus/cross bus (all the three phases in a segment) using Coyote-single conductors, levelling of string conductors to the required height above the equipment, including providing j...
Beam out of Channel 100 x 50 with arrangements for stringing power conductor on 11 kV side (including bolts & nuts)1B2 Station Structure
Erection, alignment & assembly of fabricated steel lattice stru...
DP Structure with RCC Pole - 9 Mtr Long, 145 Kg WL
H frame for mounting GOS Set ( GI )
11 kV, 400 Amps Double Break GOS
9kV,10KA Lightning arrestor
1.1 kV class Armoured Copper Cables :
19 Core 2.5 Sqmm
1.1 kV class Armoured Copper Cables :
4 Core 2.5 Sqmm
1.1 kV class Armoured Copper Cables :
4 Core 10 Sq mm
Grounding of equipment using cast iron pipe electrodes (Labour)
Grounding of equipment with 50 x 6 mm G.I. Flat and connecting equipment to the earthmat/ground pit. Each point of earthing with all formation works like bending, twisting, drilling of holes and conne...
Charges for Removing/spreading of Jelly from work spot by Heavy Mazdoor 2 Mazdoor X 2 days ( each person at each Bay)
Providing nameplates and painting for earth electrodes, hiring charges for welding machine for welding,cutting and drilling. Excluding all taxes.
Base concreting 1:2:4, 650x650x150 mm
Pole concreting 1:2:4, 650x650x1700 mm
Coping 1:2:4 (as per actuals)
Multi Function Transducers(MFT)
Control Cable - 10 Copper core x 1.5sqmm
Signal Cable - 10 Copper core x 0.5sqmm
1.5 Sqmm Grey wire for interfacing of DI and DO
Configuration of RTU and Engineering along with validation of data at SLDC
Providing 01 No 11kV PCVCB Switchgear at 66/11 kV B.Matakere Substation, Saraguru Taluk, Mysuru District- CALL3-CIVIL
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...
Removal of Unserviceable Soil with Disposal upto a suitable distance as directed by the Engineer incharge of work
Steel Fabrication: Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/w...
Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per dr...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...
Removal of Unserviceable Soil with Disposal upto a suitable distance as directed by the Engineer incharge of work
Steel Fabrication: Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/w...
Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of appro...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
Work on Hand details format (Tender).doc
Others - others • 0.06 MB
BOQ.zip
Others - Bill of Quantity • 1.82 MB
NIT B MATAKERE.pdf
Instructions to Tenderers • 0.84 MB
Liquid Asset format.docx
Others - FORMAT • 0.02 MB
TENDER DOCUMENT.pdf
Tender Document • 1.99 MB
Volume II A & B.zip
Techno-Commercial Worksheet • 20.14 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .