PROVN OF SHED FOR AMBULANCE, SHUTTER FOR CFT, TINSHED FOR ANTI-FREEZING CHEMICAL AT AF STN THOISE

Amount

M&L for excavation in trenches n.exc. 1.5 m wide and n.exc. 1.5 m in depth, for foundation, etc, or for shafts, wells, cesspits, manholes, pier holes, etc. n. exc. 10 sqm on plan and n.exc. 1.5 m in depth and getting out in hard/dense soil, complete all as specified and directed.

M&L for plain cement concrete type D2 1:4:8 (40 mm graded aggregate) as in foundations, filling and mass concrete, complete all as specified and directed.

M&L for hardcore of gauge n.exc. 63 mm, deposited, spread and levelled in layers n.exc. 15 cm thick, watered and rammed to a true surface using broken stones or boulders, complete all as specified and directed.

M&L 100 mm thick PCC 1:4:8 type D-2 using 40 mm graded aggregate as in sub base,complete all as specified and directed.

M&L 100 mm thick (1:2:4) Type B-1, Plain cement concrete with using 20mm graded aggregate as in hard standing etc finished with without using extra cement , complete all as specified and directed.

M &L for precaste Cement Concrete block msonry with solid block , Type C1 1:3:6 (using 20 mm graded aggregate) exc 10 cm in width and setting in cement mortar 1: 6 extra complete all as specified and directed.

M&L Reinforced cement concrete (nominal mix) in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under reamed piles and mass concrete Type B0 1:2:4 (12.5mm graded aggregate) complete all as specified and directed.

M&L for Internal rendering 15 mm thick in cm 1:6 on fair faces of block masonry /brick work surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for External rendering 15 mm thick in cm 1:4 on fair faces of block masonry /brick work surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L preparing newly plastered or unplastered surface of walls and applying two coats of cement base paint complete all as specified and directed.

M&L preparing newly plastered or unplastered surface of walls and applying two coats of distemper oil emulsion over chalk whiting on plastered surface etc, complete all as specified and directed.

Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with coach screws, washers, and L-type or J-type or cranked hook bolts in lieu of screw in roofs complete all as specified and directed

S& F Mild steel sheet eaves gutters, galvanised class 3, half rounded with rounded edges Thickness of sheet 1.25 mm dia125mm complete all as specified and directed

M&L MS Framed work of grade Fe 410-W (Gde-E-250) quality-A as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed.

S&F Tubes, `medium grade', galvanised with all fitting ,bore of tube 100mm ,complete all as specified and directed.

S&F 0.63mm Mild steel, plain, black sheet in hearths; covering to door shut ters; covering to door chowkats (frames); chullah hoods; water tanks; water troughs; ducts; urinal troughs and funnels, etc. cut to size edges beaded if directed, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel members, etc., with plain 40 mm lap joints or welded/ riveted seams including bending, turning up, mitred angles, stopped ends, outlets, locking arragement etc. complete all as specified and as directed.

M&L for preparation of new or previously untreated steel surfaces of any description, over 10cm width or girth, not otherwise described and apply two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed.

M&L mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, binding spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) n. less than 0.9mm dia complete all as specified and as directed.

Ditto- but 8mm dia in stirrups, spaces, binders.

Sand filling under floors or in foundation including watering and consolidation complete all as specified and directed.

Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80mm thickness, M-40 Grade With grey cement and pigment complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm in soft/loose soil, complete all as specified and directed.

M&L for removing excavated materials n.exc. 50m and depositing where directed at a level n.exc. 1.5m above the starting point in soils, complete all as specified and directed.

Dismantling of mild steel rolling shutters of any description not otherwise provided complete in all respect as directed.

S&F for steel rolling shutters having 1.25mm laths thickness with ball bearing as specified incl top cover, anchoring rod, hasp and staple and one shop coat of primer, erected in position as indicated complete gear operated type with bevel gear box and crank handle complete all as specified and directed.

S&F for safety lever locks mild steel with four levers for rolling shutters complete in all respect as specified and directed.

S&F for ball bearing for rolling shutter complete in all respect as specified and directed.

M/S GEE AAR and SONS ENTERPRISES

M/S LIBE & CO