(i) Brightening up of station buildings, service buildings, etc., at various locations in SSE/W/LLI & VM sections and ii) Improvements to Running room such as provision of flooring and finishing, construction of GLR and landscaping works, etc., at Puduchattiram station in VM-TPJ (main line) section.

Description:- Brightening up of station buildings and service buidlings at various locations in SSE/W/LLI section Above/ Please see Item Breakup for details. 12289706.15 AT Par 12289706.15 Below/P

Description:- Brightening of Station Buildings and Name Boards at various locations in SSE/W/VM Section. Above/ Please see Item Breakup for details. 5120740.17 AT Par 5120740.17 Below/P

Description:- Brightening of Coping Wall and demarcation of Platform surface at various locations in SSE/W/VM section. S.No. Item Item Qty Qty Unit Unit Rate Basic Value Escl.(%) Amount Bidding Code Unit TRICHCHIRAPPALLI DIVISION-ENGG/SOUTHERN RLY Schedule () A2-All items which are covered by CPWD-DSR 2021 for Tiruchchirappalli Division - Except supply of reinforcement steel. (The tenderer/contractor shall quote a rate 'at par' or a collective percentage above or below the advertised value of 3952235.95 schedule 'A2' (The advertised value is inclusive of Railways escalation over CPWD- DSR 2021 basic value) - Improvement works to Running room at Puduchattiram station. Above/ Please see Item Breakup for details. 3260057.95 AT Par 3260057.95 Below/P

Description:- Improvements to Running room such as flooring, cladding, etc., at Puduchattiram station Above/ Please see Item Breakup for details. 482346.35 AT Par 482346.35 Below/P

Description:- Water supply and sanitary arrangements for Running room at Puduchattiram station. Above/ Please see Item Breakup for details. 188942.40 AT Par 188942.40 Below/P

Description:- Provision of GLR 10000 litres capacity with borewell at Puduchattiram station. Above/ Please see Item Breakup for details. 20889.25 AT Par 20889.25 Below/P

Description:- Garden pipe line works for Running room at Puduchattiram station. S.No. Item Item Qty Qty Unit Unit Rate Basic Value Escl.(%) Amount Bidding Code Unit Schedule () A3-All items which are covered by CPWD-DSR 2021 -(Horticulture)for Tiruchchirappalli Division - Except supply of reinforcement steel. (The tenderer/contractor shall quote a rate 'at par' or a collective percentage above or 40664.00 below the advertised value of schedule 'A3' (The advertised value is inclusive of Railways escalation over CPWD-DSR 2021 basic value)-Running room at Puduchattiram station. Above/ Please see Item Breakup for details. 40664.00 AT Par 40664.00 Below/P

Description:- Provision of Landscaping and gardening for Running room at Puduchattiram station. S.No. Item Item Qty Qty Unit Unit Rate Basic Value Escl.(%) Amount Bidding Code Unit Schedule () B1-Items which are not covered by Unified Standard Schedule of rates

shall quote unit rate)-Improvement works to Running room at Puduchattiram station.

Description:- Lime concrete terracing on roofs average thickness 10cm laid to fall with 25mm

with gur and belgiri treatment complete including rounding of junctions with parapet wall complete - upto floor two level with all leads and lifts etc., complete and as directed by the Engineer-in-charge. (All labour and materials by the contractor)

Description:- Providing and fixing on wall face unplasticised - Rigid PVC single socketed rain water

IS:5382 leaving 10mm gap for thermal expansion with all leads and lifts etc., complete and as directed by the Engineer-in-charge. (All labour and materials by the contractor)

Description:- Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for

ring conforming to IS:5382 leaving 10mm gap for thermal expansion. Single tee without door, (110mmx110mm x110mm) with all leads and lifts etc., complete and as directed by the Engineer-in- charge. (All labour and materials by the contractor)

Description:- Providing and fixing on wall face unplasticised - PVC moulded bend and shoe for unplasticised-Rigid PVC rain water pipes conforming to IS:13592 Type-A including jointing with seal

IS:13592 Type-A including jointing with seal ring conforming to IS:5382 leaving 10mm gap for thermal expansion. Bend 87.5°, 110mm dia. bend. (All labour and materials by the contractor) TRICHCHIRAPPALLI DIVISION-ENGG/SOUTHERN RLY

Description:- Providing and fixing on wall face unplasticised - PVC moulded bend and shoe for

ring conforming to IS:5382 leaving 10mm gap for thermal expansion water pipes conforming to IS:13592 Type-A including jointing with seal ring conforming to IS:5382 leaving 10mm gap for thermal expansion. Shoe (Plain), 110mm dia. shoe - (All labour and materials by the contractor)

Description:- Providing and fixing unplasticised-PVC pipe clips of approved design to unplasticised-

of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete . 110mm dia (All labour and materials by the contractor)

and weighing not less than 440 grams with all leads and lifts etc., complete and as directed by the Engineer-in-charge. (All labour and materials by the contractor)

Description:- Supply delivery of natural Pebbles filter media for Filter bed operation & sedimentary

should be double washed, screened, kiln dried and classified into various sizes to meet specification including all incidental charges, conveyance, loading & unloading etc., as directed by the Engineer- *in-charge-Size : 5 mm to 20mm (All labour and materials by the contractor)

Description:- Planting of Song of India Plant ornamental foliage shrub variety of height 30-45 cm in

saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth with all leads and lifts etc., complete and as directed by the Engineer-in-charge. (All labour and materials by the contractor)

Description:- Supply, Fixing & commissioning of 5004 PLUS SAM PRS Series Rotor pop up sprinkler full/part circle having radius of 6.7m - 12m @ 2.5 - 4.5 bar with discharge of 0.09 - 0.61 ltr./sec. the sprinklers having Arc Adjust thru Top Cover w/ Std. Screwdriver The sprinkler is gear driven rotary type with having 3/4" bottom inlet. Oversized wiper seal, Rain Curtain technology, gentle close in watering and Self-flushing arc adjustment port and also having tapered riser stem with Wiper Seal

optimizer technology, internal Seal - A - Matic 247 PD-946 device which prevents low head drainage (upto 3.1m) & hence puddling & erosion. The body of sprinkler is of non - corrodible, heavy duty, Anti Breaking System plastic. O-ring Slip Clutch, Racheting Slip Clutch, Side Inlet Available 6" and 12",Turret-mounted Internal dia Plugs, Flow Stop Available, Non-potable water indication available etc., complete including installation charges. (Rain Bird, Toro, K-rain or equivalent brand) with all leads and lifts etc., complete and as directed by the Engineer-in-charge. (All labour and materials by the contractor)

Description:- Providing, fixing, Testing & Commissioning of PVC Ball valve 16 mm ( 1/2 " ) with

equivalent brand make with all leads and lifts etc., complete and as directed by the Engineer-in- charge. (All labour and materials by the contractor)

Description:- Supply of Bio - fertilizer at Vermi Compost Manure in a powdery form, devoid of soil

cost of transportation, loading, unloading stacking with all leads and lifts etc., complete and as directed by the Engineer-in-charge. (All labour and materials by the contractor)

mm CL - II. including installation charges. (Netafim or equivalent brands) with all leads and lifts etc., complete and as directed by the Engineer-in-charge. (All labour and materials by the contractor)

Description:- Supply of Micro sprinkler of half & full circle with 55 LPH output flow with necessary

and lifts etc., complete and as directed by the Engineer-in-charge. (All labour and materials by the contractor)

percentage above or below the advertised value of schedule 'A1' (The advertised value is inclusive

of Railways escalation over CPWD-DSR 2021 basic value)

Item- 1 Brightening up of station buildings and service buidlings at various locations in SSE/W/LLI section

S No. Item No Description of Item Unit Qty Rate Amount

13.0 FINISHING

13.80 Providing and applying white cement based Sqm 450 123.85 55732.5

putty of average thickness 1 mm, of

1 approved brand and manufacturer, over the

plastered wall surface to prepare the surface

even and smooth complete.

Distempering with 1st quality acrylic

distemper, having VOC (Volatile Organic

Compound ) content less than 50 grams/

litre, of approved brand and manufacture,

including applying additional coats wherever

required, to achieve even shade and colour.

Applying priming coats with primer of

13.85 approved brand and manufacture, having low

VOC (Volatile Organic Compound ) content.

13.85.3 With water thinnable cement primer on wall Sqm 18050 64.45 1163322.5

3 surface having VOC content less than 50

White washing with lime to give an even

13.88 Removing white or colour wash by scrapping Sqm 18050 16.35 295117.5

and sand papering and preparing the surface

smooth including necessary repairs to

scratches etc. complete

Painting with synthetic enamel paint of

13.99 approved brand and manufacture of required

colour to give an even shade :

Finishing walls with Acrylic Smooth exterior

paint of required shade :

ltr/ 10 sqm) on existing cement paint surface

14.0 REPAIRS TO BUILDING

Repairs to plaster of thickness 12 mm to 20

mm in patches of area 2.5 sq.meters and

under, including cutting the patch in proper

shape, raking out joints and preparing and

plastering the surface of the walls complete,

including disposal of rubbish to the dumping

ground, all complete as per direction of

Engineer-in-Charge.

Item- 2 Brightening of Station Buildings and Name Boards at various locations in SSE/W/VM Section.

S No. Item No Description of Item Unit Qty Rate Amount

13.0 FINISHING

Applying priming coats with primer of

13.85 approved brand and manufacture, having low

VOC (Volatile Organic Compound ) content.

13.85.1 With ready mixed pink or grey primer on Sqm 2668 61.45 163948.6

1 wood work (hard and soft wood) having VOC

content less than 50 grams/ litre

13.85.3 With water thinnable cement primer on wall Sqm 72784 64.45 4690928.8

2 surface having VOC content less than 50

TRICHCHIRAPPALLI DIVISION-ENGG/SOUTHERN RLY

13.88 Removing white or colour wash by scrapping Sqm 14557 16.35 238006.95

and sand papering and preparing the surface

smooth including necessary repairs to

scratches etc. complete

Wall painting with plastic emulsion paint of

13.98 approved brand and manufacture to give an

Painting with synthetic enamel paint of

13.99 approved brand and manufacture of required

colour to give an even shade :

Re-lettering with black Japan paint of letter

approved brand and manufacture. per cm

13.106 Painting (one or more coats) with black Japan Sqm 300 78.6 23580

7 paint of approved brand and manufacture to

give an even shade.

14.0 REPAIRS TO BUILDING

Repairs to plaster of thickness 12 mm to 20

mm in patches of area 2.5 sq.meters and

under, including cutting the patch in proper

shape, raking out joints and preparing and

plastering the surface of the walls complete,

including disposal of rubbish to the dumping

ground, all complete as per direction of

Engineer-in-Charge.

14.1.2 With cement mortar 1:4 (1cement: 4 coarse Sqm 650 478 310700

Brightening of Coping Wall and demarcation of Platform surface at various locations in SSE/W/VM

S No. Item No Description of Item Unit Qty Rate Amount

13.0 FINISHING

Applying priming coats with primer of

13.85 approved brand and manufacture, having low

VOC (Volatile Organic Compound ) content.

White washing with lime to give an even

13.88 Removing white or colour wash by scrapping Sqm 11198 16.35 183087.3

and sand papering and preparing the surface

smooth including necessary repairs to

scratches etc. complete

Painting with synthetic enamel paint of

13.99 approved brand and manufacture of required

colour to give an even shade :

Distempering with 1st quality acrylic

distemper (ready made) having VOC content

less than 50 gm per ltr. of approved

manufacturer and of required shade and

colour complete. as per manufacturer's

14.0 REPAIRS TO BUILDING

Repairs to plaster of thickness 12 mm to 20

mm in patches of area 2.5 sq.meters and

under, including cutting the patch in proper

shape, raking out joints and preparing and

plastering the surface of the walls complete,

including disposal of rubbish to the dumping

ground, all complete as per direction of

Engineer-in-Charge.

TRICHCHIRAPPALLI DIVISION-ENGG/SOUTHERN RLY

14.1.2 With cement mortar 1:4 (1cement: 4 coarse Sqm 200 478 95600

16.0 ROAD WORK

16.49S MISCELLANEOUS

16.62 Providing and applying 2.5 mm thick road Sqm 1339 623.8 835268.2

marking strips (retro- reflective) of specified

shade/ colour using hot thermoplastic

material by fully/ semi automatic

thermoplastic paint applicator machine fitted

with profile shoe, glass beads dispenser,

propane tank heater and profile shoe heater,

driven by experienced operator on road

surface including cost of material, labour,

T&P, cleaning the road surface of all dirt,

seals, oil, grease and foreign material etc.

complete as per direction of Engineer-in-

charge and accordance with applicable

specifications.

Schedule A2-All items which are covered by CPWD-DSR 2021 for Tiruchchirappalli Division - Except

supply of reinforcement steel. (The tenderer/contractor shall quote a rate 'at par' or a collective

Schedule percentage above or below the advertised value of schedule 'A2' (The advertised value is inclusive

of Railways escalation over CPWD-DSR 2021 basic value) - Improvement works to Running room at

Puduchattiram station.

Item- 1 Improvements to Running room such as flooring, cladding, etc., at Puduchattiram station

S No. Item No Description of Item Unit Qty Rate Amount

8.0 CLADDING WORK

8.20S STONE WORK DRY CLADDING

8.31 Providing and fixing Ist quality ceramic Sqm 120 1063.45 127614

glazed wall tiles conforming to IS: 15622

(thickness to be specified by the

manufacturer), of approved make, in all

colours, shades except burgundy, bottle

green, black of any size as approved by

1 Engineer-in-Charge, in skirting, risers of steps

and dados, over 12 mm thick bed of cement

mortar 1:3 (1 cement : 3 coarse sand) and

jointing with grey cement slurry @ 3.3kg per

sqm, including pointing in white cement

mixed with pigment of matching shade

9.0 WOOD AND P.V.C. WORK

9.1S FRAMES AND TRUSSES

Providing wood work in frames of doors,

windows, clerestory windows and other

frames, wrought framed and fixed in position

with hold fast lugs or with dash fasteners of

required dia & length (hold fast lugs or dash

fastener shall be paid for separately).

Providing and fixing panelled or panelled and

glazed shutters for doors, windows and

clerestory windows, fixing with butt hinges of

required size with necessary screws,

excluding panelling which will be paid for

separately, all complete as per direction of

Engineer-in-charge. (Note:- Butt hinges and

necessary screws shall be paid separately)

9.5.1 Second class teak wood

9.7.7 Float glass panes

9.7.7.2 5.0 mm thick glass panes (weight not less Sqm 100 2231.2 223120

than 12.50 kg/sqm).

9.55S BRIGHT FINISHED M.S. FITTINGS

TRICHCHIRAPPALLI DIVISION-ENGG/SOUTHERN RLY

Providing and fixing ISI marked IS : 1341 M.S.

9.55 pressed butt hinges bright finished with

necessary screws etc. complete :

COPER OXIDISED MILD STEEL FITTINGS

(COPPER OXIDISED AS PER IS: 1378)

Providing and fixing ISI marked oxidised M.S.

9.62 sliding door bolts with nuts and screws etc.

complete : (copper oxidized as per IS: 1378)

9.72S BRASS FITTINGS

9.83 Providing and fixing aluminium die cast body Each 12 1025.65 12307.8

tubular type universal hydraulic door closer

(having brand logo with ISI, IS : 3564,

7 embossed on the body, door weight upto 35

kg and door width upto 700 mm), with

necessary accessories and screws etc.

ANODISED ALUMINIUM FITTINGS (ALL

FITTINGS SHALL BE ISI MARKED)

Providing and fixing aluminium tower bolts,

ISI marked, anodised (anodic coating not less

9.97 than grade AC 10 as per IS : 1868 )

transparent or dyed to required colour or

shade, with necessary screws etc. complete :

Providing and fixing aluminium handles, ISI

marked, anodised (anodic coating not less

9.100 than grade AC 10 as per IS : 1868)

transparent or dyed to required colour or

shade, with necessary screws etc. complete :

Providing and fixing aluminium hanging floor

door stopper, ISI marked, anodised (anodic

coating not less than grade AC 10 as per IS :

1868) transparent or dyed to required colour

and shade, with necessary screws etc.

9.105S GYPSUM BOARD PARTITIONS

9.119 Providing and fixing factory made P.V.C. door Metre 80 408.25 32660

frame of size 50x47 mm with awall thickness

of 5 mm, made out of extruded 5mm rigid

PVC foam sheet, mitred at corners and joined

with 2 Nos of 150 mm long brackets of 15x15

mm M.S. square tube, the vertical door frame

profiles to be reinforced with 19x19 mm M.S.

square tube of 19 gauge, EPDM rubber

gasket weather seal to be provided through

out the frame. The door frame to be fixed to

the wall using M.S. screws of 65/100 mm

size, complete as per manufacturer's

specification and direction of Engineer- in-

TRICHCHIRAPPALLI DIVISION-ENGG/SOUTHERN RLY

Providing and fixing factory made panel PVC

door shutter consisting of frame made out of

M.S. tubes of 19 gauge thickness and size of

19 mm x 19 mm for styles and 15x15 mm for

top & bottom rails. M.S. frame shall have a

coat of steel primers of approved make and

manufacture. M.S. frame covered with 5 mm

thick heat moulded PVC 'C' channel of size

30 mm thickness, 70 mm width out of which

50 mm shall be flat and 20 mm shall be

tapered in 45 degree angle on both side

forming styles and 5 mm thick, 95 mm wide

PVC sheet out of which 75mm shall be flat

and 20 mm shall be tapered in 45 degree on

the inner side to form top and bottom rail

and 115 mm wide PVC sheet out of which 75

9.120 mm shall be flat and 20 mm shall be tapered

on both sides to form lock rail. Top, bottom

and lock rails shall be provided both side of

the panel. 10 mm (5 mm x 2 ) thick, 20 mm

wide cross PVC sheet be provided as gap

insert for top rail & bottom rail, paneling of 5

mm thick both side PVC sheet to be fitted in

the M.S. frame welded/ sealed to the styles &

rails with 7 mm (5 mm+2 mm) thick x 15 mm

wide PVC sheet beading on inner side, and

joined together with solvent cement

adhesive. An additional 5 mm thick PVC strip

of 20 mm width is to be stuck on the interior

side of the 'C' Channel using PVC solvent

adhesive etc. complete as per direction of

Engineer-in-charge, manufacturer's

specification & drawing.

Providing and fixing wire gauge shutters

using stainless steel grade 304 wire gauge

with wire of dia 0.5 mm and average width of

aperture 1.4 mm in both directions for doors,

windows and clerestory windows with

necessary screws :

Providing and fixing factory made uPVC white

colour fixed glazed windows/ventilators

comprising of uPVC multi-chambered frame

and mullion (where ever required) extruded

profiles duly reinforced with 1.60 +/- 0.2 mm

t h i c k galvanized mild steel section made

from roll forming process of required length

(shape & size according to uPVC profile), ,

uPVC extruded glazing beads of appropriate

dimension, EPDM gasket, G.I fasteners 100 x

8 mm size for fixing frame to finished wall,

plastic packers, plastic caps and necessary

stainless steel screws etc. Profile of frame

shall be mitred cut and fusion welded at all

corners, mullion (if required) shall be also

fusion welded including drilling of holes for

fixing hardware's and drainage of water etc.

After fixing frame the gap between frame

and adjacent finished wall shall be filled with

weather proof silicon sealant over backer rod

of required size and of approved quality, all

complete as per approved drawing &

direction of Engineer-in-Charge. (Single /

double glass panes and silicon sealant shall

be paid separately). Variation in profile

dimension in higher side shall be accepted

but no extra payment on this account shall

TRICHCHIRAPPALLI DIVISION-ENGG/SOUTHERN RLY

9.147B.1 Fixed window / ventilator made of (small Sqm 7.2 7249.9 52199.28

series) frame 47 x 50 mm & mullion 47 x 68

13 mm both having wall thickness of 1.9 +/- 0.2

mm and single glazing bead of appropriate

dimension. (Area upto 0.75 sqm.)

Providing and fixing factory made uPVC white

colour sliding glazed window upto 1.50 m in

height dimension comprising of uPVC multi-

chambered frame with in-built roller track

and sash extruded profiles duly reinforced

with 1.60 +/- 0.2 mm thick galvanized mild

steel section made from roll forming process

of required length (shape & size according to

uPVC profile), appropriate dimension of uPVC

extruded glazing beads and uPVC extruded

interlocks, EPDM gasket, wool pile, zinc alloy

(white powder coated) touch locks with hook,

zinc alloy body with single nylon rollers

(weight bearing capacity to be 40 kg), G.I

fasteners 100 x 8 mm size for fixing frame to

9.147D finished wall and necessary stainless steel

screws etc. Profile of frame & sash shall be

mitred cut and fusion welded at all corners,

including drilling of holes for fixing

hardware's and drainage of water etc. After

fixing frame the gap between frame and

adjacent finished wall shall be filled with

weather proof silicon sealent over backer rod

of required size and of approved quality, all

complete as per approved drawing &

direction of Engineer-in-Charge. (Single /

double glass panes, wire mesh and silicon

sealent shall be paid separately). Variation in

profile dimension in higher side shall be

accepted but no extra payment on this

account shall be made.

9.147D.4 Three track three panels sliding window with Sqm 90 9642.6 867834

fly proof S.S wire mesh (Two nos. glazed &

one no. wire mesh panels) made of (big

series) frame 116 x 45 mm & sash 46 x 62

mm both having wall thickness of 2.3 +/- 0.2

mm and single glazing bead / double glazing

b e a d of appropriate dimension. (Area of

window above 1.75 sqm).

TRICHCHIRAPPALLI DIVISION-ENGG/SOUTHERN RLY

Providing and fixing factory made uPVC white

colour sliding glazed door comprising of uPVC

multi-chambered frame with in-built roller

track and sash extruded profiles duly

reinforced with 1.60 +/- 0.2 mm thick

galvanized mild steel section made from roll

forming process of required length (shape &

size according to uPVC profile), appropriate

dimension uPVC extruded glazing beads,

uPVC extruded interlock and uPVC extruded

Inline sash adaptor (if required), EPDM

gasket, wool pile, zinc alloy (white powder

coated) handle with key on one side of

extreme panels along with zinc plated mild

steel multi point locking having transmission

gear with keeps, zinc alloy (white powder

coated) cresent lock (if required), stainless

steel (SS 304 grade) body with adjustable

double nylon rollers (weight bearing capacity

to be 120 kg), G.I fasteners 100 x 8 mm size

for fixing frame to finished wall and

necessary stainless steel screws etc. Profile

of frame & sash shall be mitred cut and

fusion welded at all corners, including drilling

of holes for fixing hardware's and drainage of

water etc. After fixing frame the gap

between frame and adjacent finished wall

shall be filled with weather proof silicon

sealent over backer rod of required size and

of approved quality, all complete as per

approved drawing & direction of Engineer-in-

Charge. (Single / double glass panes, wire

mesh and silicon sealent shall be paid

separately). Variation in profile dimension in

higher side shall be accepted but no extra

payment on this account shall be made.

9.147F.1 Two track two panels sliding door made of Sqm 18 6882.4 123883.2

(big series) frame 67 x 50 mm & sash 46 x 82

mm both having wall thickness of 2.3 +/- 0.2

mm and single glazing bead / double glazing

bead of appropriate dimension. (Area of door

above 2.00 sqm upto 5.00 sqm)

11.0 FLOORING

11.16S TILE FLOORING

Chequerred precast cement concrete tiles 22

mm thick in footpath & courtyard, jointed

with neat cement slurry mixed with pigment

11.20 to match the shade of tiles, including rubbing

and cleaning etc. complete, on 20 mm thick

bed of cement mortar 1:4 (1 cement: 4

16 11.20.1 Light shade pigment using white cement Sqm 230 1233.05 283601.5

11.37S CERAMIC GLAZED TILES

11.37 Providing and laying Ceramic glazed floor Sqm 85 935.6 79526

tiles of size 300x300 mm (thickness to be

specified by the manufacturer) of 1st quality

conforming to IS : 15622 of approved make

in colours such as White, Ivory, Grey, Fume

17 Red Brown, laid on 20 mm thick cement

mortar 1:4 (1 Cement : 4 Coarse sand),

Jointing with grey cement slurry @ 3.3

kg/sqm including pointing the joints with

white cement and matching pigment etc.,

11.41S VITRIFIED FLOOR TILES

TRICHCHIRAPPALLI DIVISION-ENGG/SOUTHERN RLY

Providing and laying vitrified floor tiles in

different sizes (thickness to be specified by

the manufacturer) with water absorption less

than 0.08% and conforming to IS: 15622, of

approved make, in all colours and shades,

laid on 20mm thick cement mortar 1:4 (1

cement : 4 coarse sand), jointing with grey

cement slurry @ 3.3 kg/ sqm including

grouting the joints with white cement and

matching pigments etc., complete.

12.0 ROOFING

12.1S SHEET ROOFING

12.20 Providing and laying pressed clay tiles (as Sqm 730 620 452600

per approved pattern 20 mm nominal

thickness of approved size) on roofs jointed

with cement mortar 1:4 (1 cement : 4 coarse

sand) mixed with 2% integral water proofing

compound, laid over a bed of 20 mm thick

cement mortar 1:4 (1 cement : 4 coarse

sand) and finished neat complete.

13.0 FINISHING

13.44S EXTERIOR FINISHING

13.50 Applying priming coat:

13.50.1 With ready mixed pink or Grey primer of Sqm 90 61.45 5530.5

20 approved brand and manufacture on wood

work (hard and soft wood)

Painting with synthetic enamel paint of

13.61 approved brand and manufacture to give an

21.0 ALUMINIUM WORK

Providing and fixing aluminium work for

doors, windows, ventilators and partitions

with extruded built up standard tubular

sections/ appropriate Z sections and other

sections of approved make conforming to IS:

733 and IS: 1285, fixing with dash fasteners

of required dia and size, including necessary

filling up the gaps at junctions, i.e. at top,

bottom and sides with required EPDM rubber/

neoprene gasket etc. Aluminium sections

shall be smooth, rust free, straight, mitred

and jointed mechanically wherever required

including cleat angle, Aluminium snap

beading for glazing / paneling, C.P. brass /

stainless steel screws, all complete as per

architectural drawings and the directions of

Engineer-in-charge. (Glazing, paneling and

dash fasteners to be paid for separately) :

21.1.1 For fixed portion

thickness of powder coating 50 micron)

Providing and fixing 12 mm thick

prelaminated particle board flat pressed

three layer or graded wood particle board

conforming to IS: 12823 Grade l Type ll, in

21.2 panelling fixed in aluminum doors, windows

shutters and partition frames with C.P. brass

/ stainless steel screws etc. complete as per

architectural drawings and directions of

engineer-in-charge.

21.2.2 Pre-laminated particle board with decorative Sqm 100 951.05 95105

lamination on both sides

TRICHCHIRAPPALLI DIVISION-ENGG/SOUTHERN RLY

Filling the gap in between aluminium frame &

adjacent RCC/ Brick/ Stone work by providing

weather silicon sealant over backer rod of

approved quality as per architectural

drawings and direction of Engineer-in-charge

Item- 2 Water supply and sanitary arrangements for Running room at Puduchattiram station.

S No. Item No Description of Item Unit Qty Rate Amount

10.0 STEEL WORK

10.2 Structural steel work riveted, bolted or Kg 250 111.95 27987.5

welded in built up sections, trusses and

1 framed work, including cutting, hoisting,

fixing in position and applying a priming coat

of approved steel primer all complete.

17.0 SANITARY INSTALLATIONS

Providing and fixing water closet squatting

pan (Indian type W.C. pan ) with 100 mm

sand cast Iron P or S trap, 10 litre low level

white P.V.C. flushing cistern, including flush

17.1 pipe, with manually controlled device (handle

lever) conforming to IS : 7231, with all

fittings and fixtures complete, including

cutting and making good the walls and floors

wherever required:

17.1.1 White Vitreous china Orissa pattern W.C. pan Each 4 5781.35 23125.4

2 of size 580x440 mm with integral type foot

Providing and fixing white vitreous china

pedestal type water closet (European type

W.C. pan) with seat and lid, 10 litre low level

white P.V.C. flushing cistern, including flush

17.2 pipe, with manually controlled device (handle

lever), conforming to IS : 7231, with all

fittings and fixtures complete, including

cutting and making good the walls and floors

wherever required :

17.2.1 W.C. pan with ISI marked white solid plastic Each 4 5540.55 22162.2

Providing and fixing wash basin with C.I.

brackets, 15 mm C.P. brass pillar taps, 32

mm C.P. brass waste of standard pattern,

including painting of fittings and brackets,

cutting and making good the walls wherever

17.7.4 White Vitreous China Flat back wash basin Each 9 1679.6 15116.4

4 size 550x 400 mm with single 15 mm C.P.

brass pillar tap

17.31 Providing and fixing 600x450 mm beveled Each 2 1411.15 2822.3

edge mirror of superior glass (of approved

5 quality) complete with 6 mm thick hard

board ground fixed to wooden cleats with

C.P. brass screws and washers complete.

Providing and fixing mirror of superior glass

(of approved quality) and of required shape

17.32 and size with plastic moulded frame of

approved make and shade with 6 mm thick

hard board backing :

Providing and filling the joints with spun yarn,

17.36 cement slurry and cement mortar 1:2 ( 1

cement : 2 fine sand) in S.C.I./ C.I. Pipes :

TRICHCHIRAPPALLI DIVISION-ENGG/SOUTHERN RLY

Providing and fixing trap of self cleansing

design with screwed down or hinged grating

17.60 with or without vent arm complete, including

cost of cutting and making good the walls

17.60.2 100 mm inlet and 75 mm outlet

Providing and fixing PTMT towel rail complete

with brackets fixed to wooden cleats with CP

brass screws with concealed fittings

arrangement of approved quality and colour.

17.73.2 600 mm long towel rail with total length of Each 14 600.35 8404.9

9 645 mm, width 78 mm and effective height

of 88 mm, weighing not less than 190 gms.

18.0 WATER SUPPLY

18.7S C.P.V.C. PIPES

Providing and fixing G.I. pipes complete with

G.I. fittings and clamps, i/c cutting and

making good the walls etc.-Internal work -

Exposed on wall

Providing and fixing G.I. Pipes complete with

G.I. fittings and clamps, i/c making good the

18.11 walls etc. concealed pipe, including painting

with anti corrosive bitumastic paint, cutting

chases and making good the wall :

Providing and fixing G.I. pipes complete with

18.12 G.I. fittings including trenching and refilling

etc.-External work

18.15S BRASS FITTINGS

Providing and fixing brass bib cock of

approved quality :

Providing and fixing gun metal gate valve

18.17 with C.I. wheel of approved quality (screwed

Providing and fixing uplasticised PVC

connection pipe with brass unions :

Providing and fixing C.P. brass shower rose

with 15 or 20 mm inlet :

C.I. SLUICE VALVES/ FIRE HYDRANTS &

Constructing masonry Chamber 60x45x50

cm inside, in brick work in cement mortar 1:4

(1 cement : 4 coarse sand) for water meter

complete with C.I. double flap surface box

400x200x200 mm (inside) with locking

arrangement and RCC top slab 1:2:4 mix (1

cement : 2 coarse sand : 4 graded stone

18.37 aggregate 20 mm nominal size) , i/c

necessary excavation, foundation concrete

1:5:10 ( 1 cement : 5 fine sand:10 graded

stone aggregate 40 mm nominal size) and

inside plastering with cement mortar 1:3 (1

cement : 3 coarse sand) 12 mm thick,

finished with a floating coat of neat cement

complete as per standard design :

TRICHCHIRAPPALLI DIVISION-ENGG/SOUTHERN RLY

18.37.1 With common burnt clay F.P.S.(non modular) Each 6 9020.8 54124.8

bricks of class designation 7.5

18.48 Providing and placing on terrace (at all floor Litre 5000 9.7 48500

levels) polyethylene water storage tank, IS :

12701 marked, with cover and suitable

20 locking arrangement and making necessary

holes for inlet, outlet and overflow pipes but

without fittings and the base support for

19.0 DRAINAGE

19.1S STONE WARE PIPES AND FITTINGS

Providing, laying and jointing glazed

stoneware pipes class SP-1 with stiff mixture

19.1 of cement mortar in the proportion of 1:1 (1

cement : 1 fine sand) including testing of

joints etc. complete :

Item- 3 Provision of GLR 10000 litres capacity with borewell at Puduchattiram station.

S No. Item No Description of Item Unit Qty Rate Amount

18.0 WATER SUPPLY

18.7S C.P.V.C. PIPES

Providing and fixing Chlorinated Polyvinyl

Chloride (CPVC) pipes, having thermal

stability for hot & cold water supply,

including all CPVC plain & brass threaded

fittings, including fixing the pipe with clamps

at 1.00 m spacing. This includes jointing of

pipes & fittings with one step CPVC solvent

cement and testing of joints complete as per

direction of Engineer in Charge.-Internal work

- Exposed on wall

18.15S BRASS FITTINGS

Providing and fixing gun metal gate valve

18.17 with C.I. wheel of approved quality (screwed

18.59S AIR VALVE & WATER METER (BULK TYPE)

18.63 Providing and fixing PTMT angle stop cock 15 Each 2 136.6 273.2

4 mm nominal bore, weighing not less than 85

23.0 RAIN WATER HARVESTING & TUBEWELLS

Boring/drilling bore well of required dia for

casing/ strainer pipe, by suitable method

prescribed in IS: 2800 (part I), including

collecting samples from different strata,

preparing and submitting strata chart/ bore

log, including hire & running charges of all

equipments, tools, plants & machineries

required for the job, all complete as per

direction of Engineer-in-charge, upto 90

metre depth below ground level.

23.1.1 All types of soil

TRICHCHIRAPPALLI DIVISION-ENGG/SOUTHERN RLY

Boring/drilling bore well of required dia for

casing/ strainer pipe, by suitable method

prescribed in IS: 2800 (part I), including

collecting samples from different strata,

preparing and submitting strata chart/ bore

23.2 log, including hire & running charges of all

equipments, tools, plants & machineries

required for the job, all complete as per

direction of Engineer -in-charge, beyond 90

metre & upto 150 metre depth below ground

Supplying, assembling, lowering and fixing in

vertical position in bore well, unplasticized

PVC medium well casing (CM) pipe of

required dia, conforming to IS: 12818,

including required hire and labour charges,

fittings & accessories etc. all complete, for all

depths, as per direction of Engineer -in-

Supplying, assembling, lowering and fixing in

vertical position in bore well unplasticized

PVC medium well screen (RMS) pipes with

23.4 ribs, conforming to IS: 12818, including hire

& labour charges, fittings & accessories etc.

all complete, for all depths, as per direction

of Engineer-in-charge.

Item- 4 Garden pipe line works for Running room at Puduchattiram station.

S No. Item No Description of Item Unit Qty Rate Amount

18.0 WATER SUPPLY

18.7S C.P.V.C. PIPES

Providing and fixing G.I. pipes complete with

18.12 G.I. fittings including trenching and refilling

etc.-External work

18.15S BRASS FITTINGS

Providing and fixing brass bib cock of

approved quality :

Providing and fixing brass stop cock of

approved quality :

Schedule A3-All items which are covered by CPWD-DSR 2021 -(Horticulture)for Tiruchchirappalli

Division - Except supply of reinforcement steel. (The tenderer/contractor shall quote a rate 'at par'

Schedule or a collective percentage above or below the advertised value of schedule 'A3' (The advertised

value is inclusive of Railways escalation over CPWD-DSR 2021 basic value)-Running room at

Puduchattiram station.

Item- 1 Provision of Landscaping and gardening for Running room at Puduchattiram station.

S No. Item No Description of Item Unit Qty Rate Amount

2.0 HORTICUTURE AND LANDSCAPING

Supplying and stacking at site dump manure

f r o m approved source, including carriage

2.4 upto 5 km lead complete (manure measured

in stacks will be reduced by 8% for payment)

2.4.1 Screened through sieve of I.S. designation 20 cum 10 254.15 2541.5

2.9 Mixing earth and sludge or manure in the cum 10 36.55 365.5

2 required proportion specified or directed by

the Officer-in-charge

TRICHCHIRAPPALLI DIVISION-ENGG/SOUTHERN RLY

2.20 Filling mixture of earth and sludge or manure cum 10 18.25 182.5

in the desired proportion in trenches,

3 flooding with water and leveling (cost of

supplying earth and sludge or manure and

mixing excluded).

Providing Circular Cement Concrete pots of

specified size, cast with cement concrete of

nominal mix 1:2:4 (1 cement: 2 coarse sand:

4 graded stone aggregate 6 mm nominal

size), reinforced with 7 Nos ( 3 nos horizontal

& 4 nos vertical " U " shape) M.S. wires of 3.5

mm dia as per design, including required

form work, finishing with cement punning on

exposed surface, curing for specified period

and stacking in required rows & height, all

complete as per direction of Officer-in-

2.30.1 Top inside dia 30 cm, outer bottom dia 20 Each 25 257.6 6440

4 cm, total height 30 cm with wall thickness of

Filling of the following size empty pots with

mixture of good earth & manure in the ratio

of 2:1 (Two part of Good earth & one port of

manure) and placing them on appropriate

place i/c carriage of earth, manure and pots

up to 50 mtr, as per direction of officer

incharge. (The cost of good earth, earthen

pots & manure will be paid seperately.)

Bottom Dia & 25cm Perpendicular height.

2.34 Providing & laying Selection no. 1 doob grass Sqm 100 87.5 8750

turf with earth 50mm to 60mm thickness of

existing ground prepared with proper level

and ramming with required tools wooden and

6 then rolling the surface with light roller make

the surface smoothen and light watering the

same maintenance for 30 days or more till

the grass establish properly,as per direction

of officer in charge

2.56 Anti termite treatment of lawn area through Sqm 100 7.55 755

premise 30.50% I P. one liter premise diluted

in 499 liters water and applying solution @

1.00 litre solution per sqm lawn or bed area.

(two application) i/c cost of chemical)and as

per direction of officer-in-charge.

Plantation of Trees, Shrubs, and Hedge at

site i/c watering and removal of

2.57 unserveiceable material's as per direction of

officer in charge (excluding cost of plant &

3.0 FOLIAGE AND SHADE LOVING PLANTS

3.18 Providing and displaying of Areca Palm Each 5 157.85 789.25

having ht. 90 cm to 1.20 m with 4 to 5

suckers, well developed, fresh and healthy

with lush green foliage in 2 5 c m s i z e of

Earthen pot/Plastic pot & a s p e r direction of

the officer-in-charge.

3.35 Providing and displaying of Croton Duck Foot Each 5 322.9 1614.5

(Elite) having ht. 60 cm to 75 cm with 4 to 5

branches, well developed, fresh and healthy

colorful leaves in 2 5 c m s i z e o f Earthen

pot/Plastic p o t & a s p e r direction o f the

officer-in-charge.

5.0 ORNAMENTAL PLANTS

TRICHCHIRAPPALLI DIVISION-ENGG/SOUTHERN RLY

5.14 Providing and Displaying Cycus revoluta in 35 Each 5 1183.9 5919.5

cm challi, specimen, having 30 to 40 with

fresh and healthy, leaves having 25cm to

30cm Circumference of base stem well

developed as per direction of the officer-in-

5.30 Providing and Displaying Foxtail palm well Each 5 1183.9 5919.5

developed with fresh & healthy foliage of ht.

210 to 240 cm in big 40 cm Cement Pot as

per direction of the officer-in-charge.

5.40 Providing and Displaying Topiary of Ficus Each 5 1127.5 5637.5

Panda well developed with fresh & healthy

foliage with 3 to 4 Ball and 60 to 75 cm

spread each Ball, 135 to 150 cm ht., in 35 cm

Cement Tray /Cement Pot as per direction of

the officer-in-charge.

8.0 SHRUBS

8.49 Providing and stacking of Nerium oleander Each 5 30 150

(kaner) of height 45-60 cm. with 3-4

branches in poly bags of size 20 cm as per

direction of the officer-in-charge.

8.68 Providing and stacking of Tecoma Each 5 50 250

gaudichaudi of height 60-75 cm. with 5- 6

branches in p.bag of size 25 cm as per

direction of the officer-in-charge.

9.0 CREEPER PLANTS

9.1 Providing and stacking of Allamanda Each 5 45 225

cathartica of height 30 cm to 45 cm. in 20 cm

size o f Earthen pots / Plastic pots & a s per

direction of the officer-in-charge.

9.4 Providing and stacking of Bougainvillea Each 5 40 200

(Variety Butiana, Lady Mary Baring,

Mahara,Mohan,Scarlet Queen, Variegated,

Glabra Formosa, Peruviana Odissi, Paratha,

19 Subhra,Thimma, Spectabilis L.N Birla,

Refulgens) of height 30 cm. to 45 cm. with 2-

3 branches in 20 cm size of Earthen pots /

Plastic pots & as per direction of the officer-

11.0 MEDICINAL PLANTS

11.7 Providing and Stacking of Tulsi of ht. 30cm Each 5 20 100

20 with multi branches in Poly bag of size 20

cm. as per direction of the officer-in-charge.