Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹29.3 LAccepted-AOC | ₹29.3 L Quoted ₹32.3 L | L1 | Accepted-AOC Accepted and admitted being L1 |
| 2 | L2₹33.0 L+₹64,984 (2.01%)Rejected-Finance 194A LUKER GANJ ALLAHABAD UP | ALLAHABAD | ALLAHABAD | UP | 211001 | ₹33.0 L+₹64,984 (2.01%) | L2 | Rejected-Finance Other than L1 |
Tender Value
Refer Docs
EMD Value
₹60,000
Closing Date
23 Jul 2021, 6:00 pmClosed
GE (North)
GE (North) Meerut Cantt PIN 250001
MAINT REPAIR TO CEILING FANS EXHAUST FANS GEYSERS DEEP FREZERS AIR CONDITIONERS DESERT COOLERS AND OTHER CONNECTED ITEMS UNDER AGE EM I OF GE NORTH MEERUT CANTT
2021_MES_454404_1
8262/E8
Open Tender
Civil Works
Item Rate
180 days
Meerut
Class D
Category b i
13 documents required · 13 mandatory
₹500
GE (North)
₹60,000
Yes
20 Sept 2021
24 Jun 2021
26 Jul 2021
24 Jun 2021
23 Jul 2021
9 Jul 2021
Amount
M&L for servicing, repair and replacement of unserviceable parts at E/M yard including opening of fan body, cleaning, separating serviceable parts for reuse / refix same after repairing and replacing defective parts with new one (new spares followed below shall be measured and paid seperately, minor spares and consumables like screws, washers, grease, cleaning agents, consumables etc. is deemed to be included in the cost ) reassembling, greasing complete all as specified and directed for the following:- (a) Ceiling Fan 1200mm Sweep of any make or model
(b) All as per item No 01 here-in-before but Ceiling Fan 1400mm Sweep of any make or model
(c) All as per item No 01 here-in-before but Wall / Cabin Fan 400 / 450mm Sweep of any make or model
(d) All as per item No 01 here-in-before but Exhaust Fan 300mm Sweep of any make or model
(e) All as per item No 01 here-in-before but Exhaust Fan 380mm Sweep of any make or model
(f) All as per item No 01 here-in-before but Exhaust Fan 450mm Sweep of any make or model
(g) All as per item No 01 here-in-before but Pedestal Fan 400 / 450mm Sweep of any make or model
(h) All as per item No 01 here-in-before but Air Circulator Fan 600mm Sweep of any make or model
M & L for rewinding the fans of any make, any model, from a reputed workshop, removing the burnt winding, cleaning slots, re-winding the motor with super enameled copper wire of size equivalent to the original winding including insulated packing materials, Varnishing, Drying etc, replacement of body screws, testing and commissioning on full load for 4 hrs continuous running all as directed for the following:- (a) Ceiling Fan 1200mm Sweep of any make or model
(b) All as per item No 09 here-in-before but Ceiling Fan 1400mm Sweep of any make or model
(c) All as per item No 09 here-in-before but Wall / Cabin Fan 400 / 450mm Sweep of any make or model
(d) All as per item No 09 here-in-before but Exhaust Fan 300mm Sweep of any make or model
(e) All as per item No 09 here-in-before but Exhaust Fan 380mm Sweep of any make or model
(f) All as per item No 09 here-in-before but Exhaust Fan 450mm Sweep of any make or model
(g) All as per item No 09 here-in-before but Pedestal Fan 400 / 450mm Sweep of any make or model
(h) All as per item No 09 here-in-before but Air Circulator Fan 600mm Sweep of any make or model
M & L for Preparing the surface, remove the existing painting by scraping, cleaning, filling the cavities and applying 2 coats of spray paint of synthetic enamel white / Brown paint over a coat of red oxide primer, including writing the MES Nos. complete all as specified and directed for the following:- (a) Ceiling Fan 1200mm Sweep of any make or model
(b) All as per item No 17 here-in-before but Ceiling Fan 1400mm Sweep of any make or model
(c) All as per item No 17 here-in-before but Wall / Cabin Fan 400 / 450mm Sweep of any make or model
(d) All as per item No 17 here-in-before but Exhaust Fan 300mm Sweep of any make or model
(e) All as per item No 17 here-in-before but Exhaust Fan 380mm Sweep of any make or model
(f) All as per item No 17 here-in-before but Exhaust Fan 450mm Sweep of any make or model
(g) All as per item No 17 here-in-before but Pedestal Fan 400 / 450mm Sweep of any make or model
(h) All as per item No 17 here-in-before but Air Circulator Fan 600mm Sweep of any make or model
S&F in repairs Condensor / Capacitor, 240V, AC, suitable for fans all as directed for the following:- a) 2.5 mfd
b) All as per item No 25 here-in-before but 3.15 mfd
c) All as per item No 25 here-in-before but 4.0 mfd
S&F in repairs Ball bearing made out of high carbon steel, equivalent to the original, 6201/6202/6203/6204/NF-8/6205, suitable for any type, any make, any size fans all as directed. Make: SKF / NBC / FAG . complete all as specified and directed
S&F in repairs GM Bush bearing, equivalent to the original, X-I, X-2, X-3, X-4, suitable for any type, any make, any size, fan . complete all as specified and directed
S&F in repairs Nickel plated mild steel clamps, suitable for ceiling fans any type, any make, any size complete all as specified and directed
S&F in repairs Down rod, suitably threaded and holed, made out of 15mmdia GI tubes, duly painted, 300mm long, suitable for ceiling fans any type, any make, any size complete all as specified and directed
All as per item No 31 here-in-before but 600mm long
All as per item No 31 here-in-before but 900mm long
S&F in repairs Fan canopy with tightening screw/check nut, made out of PVC, suitable for ceiling fans any type, any make, any size complete all as specified and directed
S&F in repairs rubber reel insulator, suitable for ceiling fans any type, any make, any size complete all as specified and directed
S&F in repairs Split pin made out of Nickel plated mild steel with specified temper, suitable for ceiling fans of any type, any make with bolts of any size complete all as specified and directed
S&F in repairs Bakelite body Nichrome connectors, 2 way with fixing screws of suitable size for ceiling fans of any type, any make complete all as specified and directed
S&F in repairs PVC condenser holder /rubber condenser holder with PVC connector for ceiling/ Exhaust fans complete all as specified and directed
S&F MS nut bolt 50 mm long 8 mm dia for ceiling fans complete all as specified and directed
All as per item No 39 here-in-before but 100 mm long
S&F in repairs MS screw for fixing ceiling fan blades complete all as specified and directed
S&F in repairs Armature of ceiling fan with winding complete with shaft for the make ceiling fan Polar/Orient/khaitan/MIE/Usha complete all as specified and directed
S&F in repairs Clutch for ceiling fan made out of GI heavy both end threaded as per sample suitable for 1200 /1400 mm sweep ceiling fan complete all as specified and directed
S&F in repairs Metal bottom cover of ceiling fan complete with bearing holder suitable for any type,any make or model complete all as specified and directed
All as per item No 44 here-in-before but top cover of ceiling fans.
S&F in repairs Magnetic ring of ceiling fans for any type,any make or model complete all as specified and directed
S&F in repairs Bottom cover including required size of screw for fixing in ceiling fans as per sample complete all as specified and directed
S&F in repairs Fan blades made out of 1.2mm thick Aluminium alloy and MS screws duly balanced & spray painted with White or Brown colour, Set of three, suitable for ceiling fans of any type, any make complete all as specified and directed for the following:- (a) 1200mm Sweep
(b) All as per item No 48 here-in-before but 1400mm Sweep
S&F in repairs Fan blades made out of Acrylic / PVC alloy and MS screws duly balance suitable for 450mm wall / cabin fans of any type, any make, complete all as specified and directed
S&F in repairs Fan blades made out of thick Aluminium alloy and MS screws duly balanced & spray painted with approved colour, suitable for Exhaust fans of any type, any make all as directed for the following:- (a) 300mm Sweep
(b) All as per item No 51 here-in-before but 380mm Sweep
(c) All as per item No 51 here-in-before but 450mm Sweep
S&F in repairs Fan blades made out of Acrylic / PVC alloy and MS screws duly balance suitable for 400 / 450mm Pedestal fan of any type, any make, complete all as specified and directed
S&F in repairs Fan blades made out of 1.2mm thick Aluminium alloy and MS screws duly balanced & spray painted with approved colour, suitable for 600mm Air Circulator fan of any type, any make acomplete all as specified and directed
S&F in repairs 1100V grade PVC sheathed PVC insulated flexible 3 core cable with multistranded copper conductor of size 1.5Sqmm, ISI Marked. complete all as specified and directed
Supply & fixing in repair base plate for wall mounting fan any type/ size as per existing size of fan complete all as specified and directed
Supply & fixing in repair regulator for wall mounting fan any type/ size as per existing size of fan complete all as specified and directed
Supply & fixing in repair protection cover (jali) complete front and back for wall mounting fan any type/ size as per existing size of fan complete all as specified and directed
Dismantling and removing the existing Geysers of any type, any make, from various lacations of GE (N) Meerut area after disconnecting the water connection, electric connection for repair / painting / replacement of defective parts, opening the geyser assembly and descalling with hydrochloride solution fixing of geyser assembly , cleaning up inner tank including repair of rubber seal, ring nuts, bolts, washers and other connected works, pressure testing, refixing at it's original location, connecting complete all as directed (new spares followed below shall be measured and paid seperately, minor spares and consumables like screws, washers, cleaning agents, consumables etc. is deemed to be included in the cost) for the following:- a) 25 Litre
b) All as per item No 60 here-in-before but 50 Litre
S&F in repairs Heating element, suitable for any type, any make geyser, 240V, AC, ISI Marked, with heat resistant rubber washer, for the following capacity, connecting complete all as directed for the following:- a) 1.5 KW
b) All as per item No 62 here-in-before but 2.0 KW
S&F in repairs Thermostat control unit suitable for any type, any make and 25 / 50 Ltrs capacity geyser, 30-90 degree rating, 240V, AC, ISI Marked, connecting complete all as specified and directed
S&F in repairs indicating lamp unit round / rectangular type, suitable for any type, any make geyser, standard quality, AC, 240V, Red or Green in color connecting complete all as specified and directed
S&F in repairs fusible plug made out of brass with internal or external threading suitable for any type, any make geyser of capacity 25 / 50 Ltrs complete all as specified and directed
S&F in repairs Inner assembly with heat resistant rubber ring washer incl nuts, bolts, clamps, suitable for any type, any make Geyser, ISI marked, complete all as directed for the following:- a) 25 Litre
b) All as per item No 67 here-in-before but 50 Litre
All as per item No 67 here-in-before but all in one inner assembly with Heating Element & Thermostat suitable for modern 25 ltrs / 50 ltrs Geysers suitable for any make , any model all as directed.
S&F in repairs inner tank made out of heavy duty steel sheet, ISI Marked, suitable for any type, any make geyser, for the following capacities complete all as directed for the following:- a) 25 Litre
b) All as per item No 70 here-in-before but 50 Litre
S&F in repairs Metallic Outer cover including bottom and top cover fabricated out of 24 gauge MS sheet duly painted suitable for any type, any make geyser complete all as directed for the following:- a) 25 Litre
b) All as per item No 72 here-in-before but 50 Litre
M&L for repairs to any type, any make geyser metallic inner tank, arresting the leakage by welding, brazing etc, pressure testing after repairs, complete all as directed for the following:- a) 25 Litre
b) All as per item No 74 here-in-before but 50 Litre
M&L for filling the glass wool between outer cover and inner tank of any type, any make geyser, 50/25 litres capacity, complete all as specified and directed
M&L for Preparing the surface of any type, any make geyser, remove the existing painting by scraping, cleaning, filling the cavities and applying 2 coats of spray paint with synthetic enamel white paint over a coat of red oxide primer, including writing the MES Nos. all as directed for the following:- a) 25 Litre
b) All as per item No 77 here-in-before but 50 Litre
M&L for Fabricate and fix, GI bottom cover / inspection plate, suitable for any type, any make geyser, 2 mm thick, split type, duly painted with 2 coats synthetic enamel paint over a priming coat of metallic primer to match with the existing colour complete all as specified and directed
M&L for replacement of bottom main terminal, synthetic gasket, fixing clamps suitable for any type, any make geyser complete all as specified and directed
M&L for making hole in wall, Grouting 4Nos Rag Bolts of size 125mm long x 12mmm dia in PCC on wall including suitable nuts and washers for fixing / hanging geysers, complete all as specified and directed
S&F in repairs pressure / air release valve suitable for any type, any make geyser, made out of brass 15mm bore, ISI marked, complete all as specified and directed
S&F in repairs non-return valve, made out of brass 15mm bore, ISI marked, complete all as specified and directed
S&F in repairs PVC sheathed,PVC insulated multi stranded copper conductor, 3 core, flexible cable, 1100 V grade, 2.5Sqmm, AC, connecting complete all as specified and directed
S&F in repairs Angle cock / valve, cast copper alloy, chromium plated, screwed down, high pressure, 15 mm with CP cup complete all as specified and directed
S&F in repairs Bib Tap, hot water, cast copper alloy, chromium plated, screwed down, high pressure, 15 mm with CP cup complete all as specified and directed
S&F in repairs low density polyethlyne pipe 16 mm dia (outer), 600mm long suitable for Hot water application complete with threaded union, teflone washers on both sides to suit 15 mm dia fittings. Make : waterTec / Pearl complete all as specified and directed
S&F in repair for plug top 3 pin 15 Amps capacity complete all as specified and directed
Supply only Zebra fastner of size 12x100 mm complete all as specified and directed .
S&F in repair modular Power Unit 20A, 3pin, AC, 240V ISI Marked incl FRP Box and 01 No's 16 Amps MCB SP complete all as specified and directed
S&F in repair SPN metallic enclosure with a two pin and earth plug and socket with one MCB SP 25 Amps complete all as specified and directed
S&F in repairs, Wall fan, 450mm sweep, AC,230V incl taking down old unserviceable u/s one and depositing to MES store complete all as specified and directed.
S&F in reapirs, PVC fresh air fan, 250mm sweep with louvers, AC, 230V incl taking down old unserviceable one and depositing to MES complete all as specified and directed.
All as per Srl item No 93 here-in-before but 200mm sweep
M&L for making opening in the wall for fixing exhaust fan upto 250mm /200mm, including plastering work & making good the surfaces as directed complete all as specified and directed
Supply, Install, Test & Commissioning, Water Resistant / Splash Proof (IPX-4), Whirlflow technology, Electric water heater (Geyser) 25 Ltrs capacity, 2 KW rated power, AC, 230V, Vertical type, 5 Star Rated, ISI Marked, Energy Efficient, having Feroglass coated / Anode Rod protected inner container / Tank, Incoloy Glass Coated Heating Element, High Density PUF insulated, Multi Function Safety Valve, Fire Retardant ISI Marked Heavy duty 3 core cable with shock Resistant Plug Top, temperature sensitive LED indicators, adjustable temperature setting, 0.8MPa high working Pressure, Complete with suitable size Anchoring / Grounting / Fastening type Bolts with Nuts & Washers, necessary grounting in PCC incl earthing testing for the Geyser, Colour : White, Make : Venus/ Havells / Racold
Window Type AC / Split AC :- Disconnection of suction and discharge line connection of sealed unit and taking out the defective sealed unit compressor from window type AC/Split AC of any make any type / any model replacing the defective compressor with any repaired one from any of the authorised workshop//manufacture of Make : Kirloskar/Tecumsch/Carrier refixing the compressor in the original position of window/split type AC making all existing connection complete all as directed for 1.5 ton Air conditioner incl OLP / Relay.
Supply and fixing in replacement of new compressor hermetically sealed type equipped with suitable rated capacity electric motor and over load protection making all existing connection complete all as specified and directed for 1.5 ton Window type/split Air conditioners all as directed Make : Kirloskar/Tecumsch
All as per item No 98 here-in-before but of capacity 2 ton.
All as per item No 98 here-in-before but Invertor type of capacity 1.5 ton
M&L for Gas refrigerant R12/R22/R410A/R 134 in the sealed system of window/Split type Air conditioners 1.5/2 Ton capacity after checking leakage / pressure vacumising flushing the sealed unit including replacement of filter drier and capillary tube complete all as specified and directed
Taking down of window/Split AC 1.5/2.0 ton capacity any model and cleaning / servicing of AC, overhauling of blower motor, replacement of worn out parts, preparation of body for painting one coat of black paint inner side and one coat synthatic enameled paint on the outer cover of AC and making of SM/MES No and testing of full load of summer season and reinstallation at site. Note : Worn out parts shall be measured & paid seperately.
S&F in repair split / window AC of capacity 1.5 / 2 TR (a) Blower motor 1/6 HP with base / rubber bush complete Make AUE / GE Suitable for any make / model complete all as specified and directed
All as per item No 103 here-in-before but Condensor fan motor 1/5 HP Make : AUE/GE
All as per item No 103 here-in-before but Condensor fan metallic blade.
All as per item No 103 here-in-before but Drum type blower fan PVC type.
All as per item No 103 here-in-before but Running capacitor 36 mfd make EPCOS/Havells/TESLA.
All as per item No 103 here-in-before but Starting capacitor 100 to 120 mfd make : EPCOS/Havells/TESLA.
All as per item No 103 here-in-before but Thermostate make : Indfoss / EPCOS
All as per item No 103 here-in-before but with plastic / juite Air filter.
All as per item No 103 here-in-before but cooling coil assembly suitable for any make / any model as per site requirement
All as per item No 103 here-in-before but Condensor coil assembly.
All as per item No 103 here-in-before but Wiring kit.
All as per item No 103 here-in-before but Front grill plastic type as per sample
All as per item No 103 here-in-before but Capacitor 6 mfd Make : EPCOS/Havells/TESLA.
All as per item No 103 here-in-before but Blower motor 1/3 HP for indoor unit split type AC suitable for any Make / any model as per site requirement.
All as per item No 103 here-in-before but Running capacitor 45 mfd Make : EPCOS/Havells/TESLA.
All as per item No 103 here-in-before but Blower fan 3 Ft long suitable for split AC fo Make : USHA SHRIRAM/LG (as per sample)
All as per item No 103 here-in-before but Copper wire 3 core 4 sqmm
Supply and fix in replacement of electronic circuit plate (PCB) including necessary repairs to electronic circuit for remote operation suitable for 1.5 / 2.0 ton split type AC for LG / USHA SRIRAM.
Supply and fix in replacement of remote suitable for 1.5 / 2 ton split type AC operation for LG/Usha Sriram complete all as specified and directed
Supply and fix in replacement Air break contactor relay 6.2 Amps, 415 Volts AC suitable for split type AC. Make:SIEMENS/L&T complete all as specified and directed
M&L for shifting of split AC 1.5 , 2 ton capacitor one place to another places as required at site and disconnecting of copper tubing, PVC pipe connection and installation of New location indoor/outdoor unit complete with Gas charging tested on full load on summer season complete all as specified and directed
M&L for replacement with new indoor unit of capacity 1.5 / 2 ton with cooling coil, blower motor complete with all accessories Make : LG/Voltas / Samsung as per site requirement complete all as specified and directed
M&L for replacement with new outdoor unit of capacity 1.5 / 2 ton with condensor coil, blower motor 1/6 HP , single phase, including new compressor and connection of copper tubing suction / discharge all as specified and directed complete. Make : LG/Voltas / Samsung as per site requirement. complete all as specified and directed
REFRIGERATOR : Disconnection of unserviceable compressor from suction discharge line and taking out compressor from refrigerator of capacity 300 to 320 ltrs any make and replace the defective compressor with a repaired compressor from any of the authorised repair workshop / manufacture Make : Godraj / Techmsch with OLP / relay of making all existing connection complete all as specified and directed
All as per item No 127 here-in-before but 165 to 210 ltrs.
Supply and fixing in replacement of new compressor hermetically sealed type type compressor suitable for 300 to 320 ltrs capacity refrigerator with suitable rated capacity electric motor and shall be equipped with relay / over load protection 230 Volt, 50 Hz, single phase suitable for any make or model complete all as specified and directed
All as per item No 129 here-in-before but 300 ltrs
All as per item No 129 here-in-before but 165 ltrs to 260 ltrs.
M&L for filling/charging Gas refrigerant R22/R134/R438A in the sealed system of refrigerator of any make / capacity after checking leakage / pressure vacumising flushing the sealed unit including replacement of filter drier and capillary tube complete all as specified and directed
Supply and fixing starting relay with OLP kit suitable for any make, any model refrigerator complete with testing and commissioning complete all as specified and directed
Supply and fix in replacement of thermostat switch suitable for any model / model complete all as specified and directed
Supply and fixing electric Lamp 15 watt 230 volt AC thread / pin type suitable for any make / capacity of refrigerator, make : Philips/Bajaj complete all as specified and directed
M&L for replacement of lamp holder suitable for any make/capacity model of refrigerator complete all as specified and directed
M&L for replacement of door switch push type suitable for any make/capacity model of refrigerator. complete all as specified and directed
S&F Door handle suitable for Refrigerator any make / model / any cap of any . complete all as specified and directed
S&F PVC bottle guard suitable for 165 to 310 ltr Refrigerator suitable for any make /model/any capacity. complete all as specified and directed
Supply and fixing in replacement of condensing coil suitable for any make / model / refrigerator for the following capacity ( As per Sample ) :- (a) 300 / 310 ltrs complete all as specified and directed
All as per Srl item No 140 here-in-before but 165 ltrs to 210 ltrs.
Supply and fixing in replacement chilled tray plastic for suitable for any make / any model / any capacity refrigerator. complete all as specified and directed
S&F in replacement of PVC gaskit magnetic type for suitable for any make / any model / any capacity refrigerator. complete all as specified and directed
S&F in replacement of cooling fan motor with metallic blade for any capacity / any type complete all as specified and directed
Supply and fixing Ice cube tray plastic complete all as specified and directed. complete all as specified and directed
Supply and fixing vegetable tray plastic suitable for any make/any model/any capacity. complete all as specified and directed
Supply and fixing toughened glass partition for any capacity / any make / any model complete all as specified and directed
Supply and fixing timer switch for suitable for any make / any model /any size complete all as specified and directed
M&L for painting to refrigerator 310/300/316/165 ltrs by scraping the old paint and applying one coat of red oxide as primer and applying two coats of synthatic enamel paint of approved colour including writing SM No complete all as specified and directed
WATER COOLER : Disconnection of the compressor from suction and discharge line and taking out the sealed unit compressor from water cooler of any make , replacing the defective compressor with repaired compressor from any of the authorised repair workshop / manufacturer refixing the repaired compressor in the original position of the water cooler making all existing connection for following capacities :- (a) 40/80 , 60/120 ltrs capacity complete all as specified and directed
All as per item No 150 here-in-before but150 ltrs
Supply and fixing in replacement of new compressor hermetically sealed type with suitable rated capacity electric motor and shall be equipped with over load and relay, 230Volt, 50 Hz, single phase and confirming to IS-10617, suitable for water cooler 40/80 ltr capacity.Make: KIRLOSKAR/TECHUMSH/EMERSON COPLAND complete all as specified and directed
All as per item No 152 here-in-before but 60/120 ltr capacity.
All as per item No 152 here-in-before but 150 ltr capacity.
M&L cleaning of water cooler tank from inner side with soda / Acid and de-scaling of water cooler to remove by brushing and soldering the leaking places and prepare the leak proof and complete all as specified and directed
M&L for painting to water cooler of any capacity by applying two coats of synthetic enamel paint over a coat of red oxide primer of approved colour by spray machine after preparation of old surface and writing machine No with black paint complete all as specified and directed
Dismantling the blower motor of water cooler 1/32 HP capacity, 230 volts single phase and taking out burnt out copper winding wire from motor and M&L for rewinding the electric motor with super enameled copper winding wire of same size and gauge including insulation material, varnish and bush, shaft and refixing the motor complete & testing on full load including replacement of unserviceable spares complete all as specified and directed
All as per item No 157 here-in-before but 1/6HP for 150 ltr water cooler / AC
S&F in replacement of starting relay No. 522 / 1622 for water cooler Make : Tesla /Havells/EPCOS complete all as specified and directed
S&F in replacement of starting capacitor 40-60 mfd 220 Volts.Make : Tesla /Havells/EPCOS complete all as specified and directed
All as per item No 160 here-in-before but for capacitor 60-80 mfd 220 Volts.Make : Tesla /Havells/EPCOS
All as per item No 160 here-in-before but for Running capacitor 15 mfd, 415 volts .Make : Tesla /Havells/EPCOS
All as per item No 160 here-in-before but for capacitor 10 mfd, 415 volts .Make : Tesla /Havells/EPCOS
All as per item No 160 here-in-before but for capacitor 36 mfd, 415 volts .Make : Tesla /Havells/EPCOS
Supply and fixing in replacement of PVC float valve with rod and plastic ball suitable for 1/2" bore of water cooler. Make : Prayag / Pearl complete all as specified and directed
Supply and fixing in replacement of LDPE 25 mm dia flexible pipe heavy duty with suitable clamp complete all as specified and directed
Supply and fixing PVC pipe flexible type 32 mm dia for waste water draining complete all as specified and directed
Supply and fixing in replacement over load protector (OLP) for water cooler of any capacity complete all as directed. complete all as specified and directed
Supply and fixing in replacement self closing push cock 15mm bore chromium plated brass heavy duty long body inner threaded . complete all as specified and directed
Supply and fixing in replacement aluminium blade for blower motor of water cooler 80 ltrs to 150 ltrs complete all as specified and directed
Supply and fixing in replacement open type relay : CAJ-2612 complete all as specified and directed
All as per item No 171 here-in-before but CAJ-3612
Supply and fixing in replacement thermostat of water cooler of any type make INDFOSS complete all as specified and directed
Supply and fixing in replacement blower motor 1/32 HP 230 volt suitable for water cooler complete with base frame/and rubber bush make AUE/GE for 60 to 150 ltrs. complete all as specified and directed
M&L for Repair & rewinding blower motor 1/32 HP 230 volt suitable for water cooler for 60 to 150 ltrs water cooler and refixing the same position complete all as specified and directed
Supply and fixing in replacement drip tray made of stainless steel complete suitable for water cooler any make of 40 to 150 ltr complete all as specified and directed
Supply and fix water tank gasket for water cooler 40/80 ltr cap. complete all as specified and directed
S&F wiring kit complete for water cooler. complete all as specified and directed
DEEP FREEZER : Disconnection of the compressor from suction and discharge line and taking out the sealed unit compressor from Deep freezer of any make , replacing the defective compressor with repaired compressor from any of the authorised repair workshop / manufacturer refixing the repaired compressor in the original position of the Deep freezer making all existing connection for following capacities ;- (a) 200 / 300 Ltrs complete all as specified and directed
All as per item No 179 here-in-before but 400 / 500 ltrs capacity.
Supply and fix in replacement of new compressor hermetically sealed with suitable rated capacity electric motor and shall be equipped with over load and relay, 230 volt , 50 Hz , single phase and confirming to IS-10617 , suitable for Deep freezer of capacity 200 / 300 Ltrs. Make : KIRLOSKAR/TECHUMSH/EMERSON COPLAND. complete all as specified and directed
All as per item No 181 here-in-before but 400 / 500 ltrs capacity.
M&L for Filling gas refrigerent R12/R22/R-404A in the sealed system of Deep Freezer of any make and capacity after checking the leakage / pressure vacuminising flushing the sealed system including replacement of capacity Tube, copper pipe for jointing, Gas filter complete all as specified and directed
Supply & Fixing Voltage Stabilizer suitable for 2 Ton AC Make : V-Guard VG 500 or equivalent to Microtek. complete all as specified and directed
Supply & Fixing Voltage Stabilizer suitable for 1.5 Ton AC Make : V-Guard VG 400 or equivalent to Microtek . complete all as specified and directed
Supply and fixing in replacement starting relay for Deep freezer as per sample. complete all as specified and directed
Supply and fixing in replacement of main transformer 5 KVA capacity complete all as specified and directed
All as per item No 187 here-in-before but 2 / 3 / 4 KVA
All as per item No 187 here-in-before but 0.5 / 1 KVA
WATER PURIFIER : Taking out of water purifier (Aqua guard) or any other make / model and servicing , repair / over hauling of water purifer installed at cantt area for maintenance. (Spare parts will be measure and paid separetelly relevant items) complete all as specified and directed
Supply and fixing in replacement of pre filter candle (as per sample) complete all as specified and directed
Supply and fixing in replacement of Activated Carbon. complete all as specified and directed
Supply and fixing in replacement of PCB circuit electric plate. complete all as specified and directed
Supply and fixing in replacement ultra violet lamp unit complete. complete all as specified and directed
Supply and fixing in replacement of PVC pipe nylon braided heavy duty suitable for water partition inlet connection and as required at site or as directed. complete all as specified and directed
Supply and fixing in replacement of chromomum plate tee 15/8 mm for existing GI pipe connection. complete all as specified and directed
DESERT COOLER: Servicing / Disconnection desert cooler of kit fan from desert cooler for repairing including cleaning,greasing,oiling , welding or M'seal at leaking place and refixing back after repair in original position including replacement of unserviceable spares. ( parts to be replaced will be measured and paid separately under elevant items) complete all as specified and directed
S&F in repair desert cooler fan motor any type/any model/make complete all as specified and directed
Supply and fixing in replacement of capacitor 4 mfd for kit fan / Exhaust fan. complete all as specified and directed
Supply and fixing in replacement of PVC water distributer 3 way / 4 way for desert cooler of any size / capacity. complete all as specified and directed
Supply and fixing in replacement of PVC elbow suitable for desert cooler of any size / capacity. complete all as specified and directed
Supply and fixing in replacement of PVC flexible pipe 15 mm dia suitable for water distribution system of Desert cooler of any size / capacity. complete all as specified and directed
Supply and fixing in replacement of front grill plastic type desert cooler with necessary nut,bolts, and washers etc, all as directed. Make : conark complete all as specified and directed
Supply and fixing in replacement of Vertical lifting pumps 1/70 HP, 230 Volts single phase. Make : CG / Bajaj complete all as specified and directed
Supply and fixing in replacement of Sumersible pump 18 watt. Make : CG / Bajaj complete all as specified and directed
Supply and fixing in replacement of wood wool padding of desert cooler of suitable size in wire net complete weight not less than 450 gms. complete all as specified and directed
Supply and fixing in replacement side shutter for desert cooler of as per sample 22 gauge PGI sheets grill type complete all as specified and directed
Supply &install new desert cooler 4000 cum per hour,electric driven, 1 phase, 240 volts, AC heavy duty long body exhaust fan motor with , submersible water pump, ISI marked 3 core 1.50 sqmm pvc copper cable of minium 2 mtr long with plug top and control switches etc including taking down old unserviceable & submit to MES store complete all as specified and directed
Supply and fix fan motor copper wounded suitable for desert cooler 230 volts, 50 Hz, single phase AC supply four speed 180 watts of 450 mm sweep complete with fan blade and legs complete taking down old unserviceable Make : CG/Bajaj/Havells complete all as specified and directed
Supply and fixing in replacement of Mettalic fan blade for desert cooler motor. complete all as specified and directed
Supply and fixing in replacement of 3 pin plug top 5 Amps. Make : Anchor / Kinjal complete all as specified and directed
Manish Enterprises
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .