SUPPLY OF MACHINERY PARTS AS PER DRAWING YEAR 2025-26

M.S. Roller for Mud Conveyor as per drg. 1268/R-2 dated 22.06.09) OD 100mmxLength 225mm

OD 90mm.xLength 200mm

OD75mm.x Length 630mm

OD 100mm x Length 740mm

C.S. Trash Beam Bottom Bracket as per drawing No. B/2008/C-1357 dated 09.07.08 Conversion basis

G.R. Pressure Feeder Nose Plates scrappers to be mfg. as per drawing No. B/94/C-1087/R-2 dated 05.06.09

G.R. Pressure Feeder Nose Plates scrappers to be mfg. as per drawing No. B/94/C-1087/R-2 dated 05.06.09, on Conversion Basis.

Cast Steel Swing Arm Left Hand/Right Hand (Gear Side) all over machined as per drawing No. B/2002/C-1265/R-2 dated: 22.4.2009

EN-19 Forged Steel Spur Gear Pinion having Machine Cut Teeth for Cane Unloader, as per Drawing No. B/2001/C-1256/R-1, 33 Teeth.

EN-19, Forged Steel Spur Gear Pinion having Machine Cut Teeth for Cane Unloader, as per Drawing No. B/2001/C-1256/R-1, 68 Teeth.

C.S.Bearing Housing with fitted 02 Nos. Locking Camp. Plate for Roller Shaft for Mill (All over machined) to be manufactured as per Drawing No. B/93/C-1011/R-2 dated: 13-06-2009 material Cast Steel IS: 1030 Grade 27-54

Dismentling of Chopper Tubs and replacement of worn out hubs by new hubs, fitting and balancing as per drg. No. B/05/C-1129/R-1

Replacement of bronze linner of mill Hydralic cap, Machining, buffering, fitting & testing.

C.S.Sprocket on conversion basis as per drg. No. B/94/C-1056

Maching of transmission gear shaft from old shaft as per drg. No. B/2001/C-1258/R-1(Material-CL-4, IS-2004)

C.S Double Sprocket 76 Teeth for Welding & Machining with Teeth Cutting

C.S Double Sprocket 25 Teeth for Welding & Machining with Teeth Cutting

Pinion 38 Teeth of New Main Bagasse Carrier Chain

Pinion 25 Teeth of New Return Bagasse Carrier Chain

Pinion 52 Teeth of Old Main Bagasse Carrier Chain

Pinion 25 Teeth of Old Main Bagasse Carrier Chain

Worm & Worm Wheel for Crystlizer as per drg. No. B/73/C-310

Worm as per drg. No. B/75/C310

EN-9 Forged Steel Pin for Mill “A” Frame as per drg. No. B/2010/C-1377 dated: 12.06.2010. (2 Section per Pin)

C.S. GR 26/52 IS-1030 Machined Knife Holder Hub for Cane Leveler as per Drg. No. B/2007/C-1337/R-1 dt. 17.07.2022 (Without Key)

Repair of Links Hole of Block Type Chain

C.I. Idler for Cane Carrier as per drg. B/2007/C-1340 on Conversion Basis With Machining

Repair of Pinion Teeth-38 of Bagasse Elevator

C.S. Sprocket Wheel 14 Teeth for Cane Carrier Head Shaft MAICS-26/52, IS 1030 as drg. No. B/94/C-1041/R2 dt. 20.06.2007

EN-24 Helical Pinion with Shaft No. of Teeth-19, OD-90mm, Root Dia-72mm,Teeth Face Wide-180mm, Total Pinion Shaft Length-490mm as per Sample

Leaf Spring Supporting Frame for Grader as per drg. No. B/2022/C-1530. Type-1 (Spring Steel Flat Size 75 x 8mm)

EN-9 Steel Shaft for Mill House Crane as per drg. No. B/2020/C-1571, Mark-1

Repair of Chain Block 02 Ton Cap.

Repair of Chain Block 01 Ton Cap.

Repair of Chain Block 05 Ton Cap.

Repair of Chain Block 03 Ton Cap.

EN-9 Forged Steel Pin for Mill “A” Frame as per drg. No. B/2010/C-1377 dt. 12.06.2010 (2 Section per Pin)

Metalon/Teflon PTEF Bush for Rotary Screen as per drg. No. B/2024/C-1562 dt. 04.07.2024

Brass Seat for Juice Heater Double Beat Valve Size 8” as per drg. No. B/2024/C-1564 dt. 14.07.2024

SHREE RAJENDRA UDYOG (BID ID -5155414)

GEAR-N-GEAR (BID ID -5151123)

NAVIN ENTERPRISES (BID ID -5157293)