Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
Refer Docs
Closing Date
4 May 2024, 5:30 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Accessories Division, Lucknow
HINDUSTAN AERONAUTICS LIMITED Accessories Division, Lucknow Post Office, Lucknow - 226 016 Uttar Pradesh, India
Requirement of Plug for development purpose
7012
HAL-ADL/IND/RFP021/24-25
Works
Accessories Complex - Lucknow Divn - Bonded Purchase - Mechanical
₹0
Exempted
4 May 2024
13 Apr 2024
13 Apr 2024
4 May 2024
All Taxes & Duties (IGST/GST etc) for Total Design & Development Cost
Qty required for 2025-26
Value V=U X G
Annexure-C
HAL-ADL/IND/RFP021/24-25
Part No.
All Taxes & Duties (IGST/GST etc) for Total Design & Development Cost
Qty required for 2025-26
Value V=U X G
RFQ Clauses
Price: It is required to indicate prices against individual items. i) Rates should be quoted both in figures & words. ii)Price should be firm and fixed for Design, Development, Qualification, Certification and Supply of Prototypes for firm requirement mentioned in tender. iii) Please confirm, (as applicable) in your quotation that the price quoted is your lowest price and is the same as you would normally quote to Government Department & other favoured customers. iv) Bidders should indicate Price escalation formula with material & Labour content and Maximum Annual Escalation Cap (in percentage) for the production phase in Price Bid format only.
Ourselves being manufacturers, please indicate in the quotation the manufacture discount if any.
Applicablity of the Taxes (GST etc) should be explicity indicated by the bidder in his response either in percentage or in absolute terms. In the absence of this input the offer would be considered all inclusive.
GST: As GST comes into effect w.e.f. 1st July 2017, so please mention your GST No. & HSN code in front of the quoted items in bid.
Your quotation must be in the unit in which the quantity is indicated in the enquiry. If it is otherwise, conversion data must be furnished.
HAL reserves the right to order quantity less than indicated in the enquiry/ quoted for by bidder, at the prices quoted without any reference to the bidder.
Bidders should clearly mention whether the prices hold good when the full quantity of enquiry is not ordered and only a part of it. Unless otherwise mentioned, it would be assumed that the rates hold good even when lesser quantities than those enquired of are ordered. Any increase in prices at a later date for ordering lesser quantities will not be agreed to.
Please indicate approximate net weight of each of the item and gross weight and dimension of the package to enable HAL to determine the mode of dispatch.
Our conditions of contract will govern any resultant order arising out of the enquiry (copy on application) and your quotation will be subject to the said conditions.
The Harmonized System of tariff nomenclature against the items for which quotation is rendered should be indicated.
Manufacturer's name and country of origin of the materials offered must be clearly specified. Complete details and illustrated literature must accompany all quotations.
HAL is not bound to accept the lowest or any quotation or assign any reason for non- acceptance and reserves the right of accepting the whole or any part of the quotation or part of the quantity offered and you must supply the same at the rate quoted.
Please furnish list of similar equipments supplied in HAL or anywhere in India with customer’s full address, value and telephone/telex etc.(if applicable)
Vendor shall not be entitled without HAL’s consent to assign or transfer to a third party all or part of the benefits or obligations under this contract.
Any order, resulting from the enquiry, shall be governed by the General Terms and Conditions of Contract of HAL and any party quoting against this enquiry shall be deemed to have read and understood these terms and conditions and to have quoted subject to these terms and conditions.
Canvassing by tenderers in any form, including unsolicited letters on tenders submitted or post tender corrections shall render their tenders liable for summary rejection.
When counter terms and conditions have been offered by a tenderer, HAL shall not be deemed to be governed by such terms and conditions unless specific written acceptance thereof has been given by HAL.
Under no circumstances the goods should be despatched by post parcel. In case goods are despatched by post parcel we shall not be liable to make payment to you.
No price or condition and terms, notice of which has not been given against this enquiry by parties submitting quotations, will be considered by HAL, if put forward in subsequent correspondence, after acceptance of orders etc.
Disregard of any instructions, may result in your offer being ignored.
Bidders should clearly mention whether the prices hold good when the full quantity of enquiry is not ordered but only a part of it. Unless otherwise mentioned, it would be assumed that the rates hold good even when lesser quantities than those enquired of are ordered and HAL reserves the right to order quantity less than indicated in tender without any reference to you. Any increase in prices at a later date for ordering lesser quantities will not be agreed to.
HAL or HALs’ representative has the right to verify supplier's premise that product confirms to specific requirements.
GSTIN Number - PLEASE PROVIDE GSTIN NO. OF YOUR COMPANY
Status of GSTIN
ECS details submitted (Yes/No)
If ECS details not submitted, please submit in prescribed format along with quotation
ALSO PLEASE ENSURE THAT ANTI-PROFITEERING CLAUSE AS PER GST LAW IS COMPLIED i.e. ANY REDUCTION IN RATE OF TAX ON ANY SUPPLY OF GOODS or SERVICES or THE BENEFIT OF INPUT TAX CREDIT SHALL BE PASSED TO THE RECIPIENT BY WAY OF COMMENSURATE REDUCTION IN PRICES.
Material on its arrival at our factory will be inspected by our Inspection Department and their decision in the matter will be considered final. HAL shall be at liberty to allow the contractor to re-submit stores in replacement of those rejected material within a time specified by HAL and Transportation charges for the same shall have to be borne by the supplier.
Please indicate in your tender, whether stores newly manufactured throughout are offered or whether tender includes in whole or in part reconditioned stores. Where newly manufactured stores are offered and on inspection it is found that reconditioned stores or parts have been used, such stores will be rejected at the contractor risk and expense.
In the case of airborne material, the same should be covered by a Airworthiness Certificate countersigned by person/s authorized by Government Airworthiness Certifying Authority or Notarized Airworthiness Affidavit/ Works/ Test Certificate etc, as applicable.
HAL PO No., Batch No., Latest issue No., Quantity and Date Of Manufacturing, shall be provided on COC and individual packing label. For shelf life items apart from above Date of manufacturing, date of expiry/storage life shall also be indicated on each along with group.
Test certificate with date of manufacture/date of expiry/batch no must be provided along with supply.
HAL is AS9100D Certified Company, so all Development/supplies should meet criteria of AS9100D standards
Bidder agrees that HAL shall be the sole owner of Intellectual Property (IP) generated in the performance of this contract by or on behalf of Bidder with the aid of either funding and/or technical inputs from HAL (herein referred to as 'Foreground IP'). If applicable and to the extant that Bidder sub-contracts performance of any part of the contract, the Bidder shall ensure taht any Foreground IP arising from such work of its sub-contractor/s shall be assigned to HAL absolutely. Bidder hereby assigns and agrees to assign all rights and interest in the Foreground IP to HAL. Bidder shall share with HAL, all documentation necessary for HAL to exercise its rights to Foreground IP. If required by HAL, Bidder shall assist HAL in registering the Foreground IP in favour of HAL. Successful bidder will not directly deal with HAL's customer for these items.
Successful bidder shall grant to HAL an irrevocable, non exclusive, world-wide, royalty free license to sell, offer for sale, use, execute, release, disclose and distribute the developed supplies/ services/ products, which may contain Background IP. Background IP shall mean and include all pre-existing inventions and IP necessary for HAL to exercise its rights to Foreground IP.
HAL shall have the rights to use the Supplies/Services procured under the contract that may contain any Intellectual Property/Intellectual Property Rights. Bidder shall indemnify and protect at its own cost, HAL in respect of cost/claims/liabilities (including attorney's fees and associated costs of legal proceedings) arising from any violation of Intellectual Property Rights of any third party with respect to Supplies/Services provided by BIdder. If HAL or HAL's customer/s are unable to put to use the Supplies/Services or a portion thereof as a result of violation of the Intellectual Property of any third party, Bidder shall within reasonable time at Bidder's own cost either, i) procure for HAL and HAL's Customer/s the right to continue using the Supply/Service or, ii) replace or modify the Supplies/Services so that it become non-infringing or, iii) Compensate HAL the amoount equivalent to the cost of supplies procured/to be procured, development cst alreday paid to Bidder and damages suffered by HAL arising due to inability to put to use the Supplies/services or a portion thereof.
In case the Bidder receives a requirement/request for supply or repair of deliveries of this contract directly from any third party including HAL's customers, such request shall be forwarded to HAL. Intellectual Property for the purpose of this clause includes inventions, discoveries and improvements; know-how, works of authorship, technical data, drawings, specifications, process information, reports and documented information; and computer software (including without limitation, source code, object code, source code listings and object code listings that would enable the software to be reproduced or recreated), topology of integarted circuits, databases or any other such results of Intellectual activity.
The price charged for the stores supplied under the contract shall be in no event exceed the lowest price at which the contractor sells the stores or offers to sell stores of identical description to any persons/organizations including the purchaser of any department of the Central Govt. or any Dept. of the State Govt. or any statutory undertaking of the Central or State Govt., as the case may be during the period till the performance of the supply order placed and during currency of the contract is completed.
If at any time during the said period, the contractor reduces the sales price, sells or offers to sell such stores to any person/organization including the purchaser or any department of Central Govt. or any Dept. of State Govt., or any statutory undertaking of the Central or State Govt., as the case may be at a price lower than the price chargeable under the contract, he shall forthwith notify such reduction/sale or offer to sale to the Hindustan Aeronautics Limited and the price payable under the contract for the stores supplied after the date of coming into force of such reduction or sale or offer to sale shall stand correspondingly reduced.
The Supplier shall hold confidential technical data and information supplied by the Purchaser or on behalf of the Purchaser and shall not reproduce any such technical data or information or divulge the same to any third party without the prior written consent of the Purchaser. The Purchaser shall hold confidential technical data and information supplied by the Supplier or on behalf of the Supplier and shall not reproduce any such technical data or information or divulge the same to any third party without prior written consent of the Supplier except as far as may be necessary for either party to carry out its obligations under this Contract.
For the purpose of this Tender/Contract/Agreement, the Bidder/Contractor/Supplier shall not store, copy or disclose HAL’s data and information whether in written, machine readable or other tangible form or disclosed orally, that is of value to HAL. Also, Bidder/ Contractor/Supplier agrees to use HAL’s data only for the purpose under this Tender/Contract/Agreement, restrict disclosure to any other person or entity or third party and shall safeguard the provided data including from cyber security risks etc. Bidder/ Contractor/Supplier should promptly return within 90 days HAL’s data in original media and should not keep HAL;s data, upon expiry of Tender/Contract/Agreement or early termination of Contract/ Agreement and certify that HAL’s data has been deleted permanently. Non-adherence to this confidentiality clause by the Bidder/Contractor/Supplier shall be treated, as a material breach of this Tender/Contract/Agreement. The provision of this clause shall survive and remain in force notwithstanding the termination or expiry of this Contract/Agreement.
The seller confirms and declares to the buyer that the seller is the original manufacturer/licensor of the stores referred to in this contract and has not engaged any individual or firm whether Indian or foreign whatsoever, to intercede, facilitate or in any way to recommend to the HAL or any of its functionaries, whether officially or unofficially, the award of the contract to the seller nor has any amount been paid, promised or intended to be paid to any such individual or intended to be paid to any firm in respect of any such intercession, facilitation or recommendation. The seller agrees that if it is established at any time to the satisfaction of the Buyer that the present declaration is in any way incorrect or if at a later stage it is discovered by the Buyer that the seller has engaged any such individual/firm, and paid or intended to pay any amount, gift, reward, fees, commission or consideration to such person, party, firm or institution, whether before off after the signing of this contract, the seller will be liable to fund that amount to Buyer. The seller will also be debarred from entering into any supply contract with the HAL for a minimum period of 5 years. The Buyer will also have a right to consider cancellation of the contract either wholly or in part, without any entitlement or compensation to the seller who shall in such event be liable to refund all payments made by HAL in terms of the contract along with the interest at the rate of 2% per annum above LIBOR rate. The Buyer will also have the right to recover any such amount from any contracts concluded earlier with HAL or Government of India.
Please provide a confirmation letter on your company’s letterhead along with offer confirming that seller have not offered and will not offer any promise or give any material or other benefit or paid or payable any agency commission to any inter-mediators in order to obtain in exchange any advantage during the tendering or qualification process or during the execution of the contract.
EOI Ref No.
Project entails Indigenous Design, Development, Qualification & Certification of 02 types of Connectors (P/N ONTs-BS-21014V11V and P/N ONTs-BS-23222V11V) as per the basic specification (at Annexure-A) and other details given in this tender.
Vendor has to prepare final specification & test schedule for 02 types of Connectors (P/N ONTs-BS-21014V11V and P/N ONTs-BS-23222V11V) with the help of basic specification (Attached in annexure-A) and by reverse engineering. Approval of final specification and test schedule from RCMA for indigenization will also be done by the vendor, however ADL will coordinate between vendor & RCMA Lucknow for the same.
Vendor has to develop item 02 types of Connectors in Form, Fit and Functional Interface (FFFI) on turn-key basis, as per approved Technical Specifications. However, any minor change in technical parameter of the item suggested by regulatory agencies during design review stage shall also be considered by the developing agency without any cost implication.
Vendor should use aerospace grade materials for Design & Development of these 02 types of Connectors (P/N ONTs-BS-21014V11V and P/N ONTs-BS-23222V11V).
Timeline for design, development and certification of this product will be 09 months from the date of release of order to vendor.
This item must comply for the Form, Fit and Functional Interface (FFFI) of the items and weight should not exceeding that of existing unit
All necessary documents required for airworthiness certification including drawings, material test certificate from NABL accredited Lab / COC, manufacturing process layouts; test schedule etc. shall be prepared by the Vendor and approved by airworthiness agency as applicable.
The vendor shall do necessary procurement along with COC (Certificate of Conformance) traceable to OEM as per approved document.
The development procedure and Airworthiness Certification of 02 types of Connectors shall be as per DDPMAS-2021/IMTAR-2021 (Version-1.0) or latest version.
All development activities shall be done by vendor in co-ordination with RCMA, DGAQA, HAL Indigenization Dept., HAL QC & ASERDC as defined in the DDPMAS-2021/IMTAR-2021 Version1.0 & AFQMS.
As per drawing all dimensions including all geometrical tolerances are to be Inspected, recorded & certified by Development Agency’s Quality Control Department piece-wise. Same will be subjected to verification by HAL’s Quality Control Department at HAL / Vendor’s site.
The vendor shall also be audited as per AFQMS guidelines and first off article will be subjected to First Article Inspection as per AFQMS guidelines.
Vendor has to test as per the Test Schedule approved by RCMA. All testing shall be coordinated by AQA, RCMA and HAL Quality.
The present requirement of 02 types of Connectors (P/N ONTs-BS-21014V11V and P/N ONTs-BS-23222V11V) 5 Qty each (D & D Phase). However, the estimated volume for 03 years requirement is 145 Nos. each for P/N ONTs-BS-21014V11V and P/N ONTs-BS-23222V11V, these qty may increase after successful indigenization. These 02 types of Connectors will be required for entire life of SU-30MKI aircraft subjected to the customer order.
Vendor shall commit for trouble free and obsolescence free supply of 02 types of Connectors (P/N ONTs-BS-21014V11V and P/N ONTs-BS-23222V11V) for next 20 years.
The testing to be carried out on this will be as follows- • Standalone testing of 02 types of Connectors as per approved specs and test schedule. • LRU/ Sub -assembly level testing as per Requirement of RCMA, Lko. • Flight trial as per requirement of RCMA, Lko
Vendor shall absorb any minor changes in design and component, if encountered during Design reviews, integration and certification of the 02 types of Connectors to meet the requirement of technical specification finalized by RCMA.
Assembly process layout along with Bill of Material has to be detailed by vendor and same shall be submitted to HAL for approval from Regulating Authorities.
In case of order, HAL may depute it’s representative at worksite and/or organize review at HAL-Lucknow for the progress/results as per activities defined in work order in phase wise manner
HAL may ask for further details on process variables, output or any other data that may be required for assessment of the work/ results at each stages of development.
Agency / Institution has to quote for complete set (i.e. functional prototype, Qualification testing and approval). In case Agency / Institution has not quoted for complete set (all items) the quotation will be rejected. L1 vendor will be decided considering combined total cost of both items as mentioned in Price Bid (Annexure-B).
Prices are to be submitted in Price Bid format only. Prices in any form should not be mentioned in Technical Bid (or any document part of Technical Bid) otherwise offer shall be summarily rejected.
Only Indian Original Equipment Manufacturers (OEMs), with proven expertise in design, development & manufacture of similar items of aircraft are requested to participate in the Tender
The vendor should be with full knowledge in the field of design, development and supply of similar item / system and have developed/supplied in last 5 years same/similar/advanced specification type of item.
Details of similar projects (if any) completed by bidder including contact addresses of the existing customers should be provided (necessary documentary proof shall be provided).
If vendor has any dealing with Indian Air Force for similar items, the same shall be provided with contract / P.O. details.
Bidders should provide details of manufacturing facilities, details of current capabilities (technical expertise) related to design, manufacture, certification and supply of the proposed items. (must supported by must supported by documentary evidence)
Bidders should have valid AS9100D accreditation (please attach supporting document). Vendor shall also ensure timely renewal of certification till completion of Project execution.
All applicable benefits to MSMEs as per Govt. guidelines will be applicable to MSME Vendors. Relevant Documentary evidence in this regard shall be uploaded along with the Bid.
Bidder, who wants to avail exemption given to MSME vendors, should have UAN. Copy of the Udyog Aadhar Certification shall be submitted to consider such exemption to MSMEs.
Vendor shall define quantitative amount of import (if to be used) in development / manufacture of these items. Indigenous content for each item should be minimum 50 % by value (on Cost basis of the base contract price). Vendor has to provide a self-declaration in this regard in attached format Annexure-F. HAL team may verify the documentary evidence to confirm the given indigenous contents after scrutiny.
Evaluation will be based on full Compliance of Annexure-B along with acceptance of scope of work, Drawing/technical specification and qualification requirement given at Annexure-A . For award of order, L1 status of the quote will be decided considering combined total cost of both items as mentioned in Price Bid (Annexure-C). In case Agency / Institution has not quoted for complete set (all items) the quotation will be rejected.
Minimum following documents are required to be submitted by bidders: • Technical Compliance Matrix -Annexure-B, • Price Bid Annexure-C. • Technical Bid Annexure-C1 • Tender Terms & Conditions-Annexure-D • Self-Certification of Indigenous Content(IC) - Annexure-E • Declaration as per GFR 144(xi) Annexure-F • Documentary proofs as required in Tender
Successful bidder will have to get registered at HAL Lucknow (If not already registered) and provide all the necessary documents as required. If vendor is already registered in any other division of HAL for similar activity, Vendor registration letter issued by the Division may be submitted.
HAL may visit the vendor’s place for audit purpose during bid evaluation. In case any additional information or clarification is required, bidder shall have to provide it.
Response to bid through e-procurement should be uploaded on the e-portal along with documents stipulated in the Tender documents
A company can submit only one response.
Bid shall be opened as per schedule indicated on e-portal. The date fixed for opening of bid, if subsequently declared as holiday, revised date of schedule will be notified. However, in absence of such notification, the bid will be opening on next working day at same time.
The Competent Authority reserves the right to reject any or all the bids/responses without assigning any reason and the decision of the competent authority of the Accessories Division, Hindustan Aeronautics Limited, Lucknow shall be final and binding.
Bidder would be disqualified if they make false, incorrect, or misleading claims in their Bids.
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
raw.json
RAW_JSON
Draftsepecification.pdf
TENDER_DOCUMENT • 0.42 MB
TenderinvitationRFP.pdf
TENDER_DOCUMENT • 0.63 MB
AnnexureC1TECHNICALBID.xlsm
TENDER_DOCUMENT • 0.03 MB
ANNEXUREFGFR.pdf
TENDER_DOCUMENT • 0.35 MB
AnnexureELocalContent.pdf
TENDER_DOCUMENT • 0.19 MB
AnnexureCPRICEBID.xlsm
TENDER_DOCUMENT • 0.03 MB
AnnexureDTermsandcondition.xlsm
TENDER_DOCUMENT • 0.02 MB
Technicalcompliancematrix.xlsm
TENDER_DOCUMENT • 0.01 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .