REPAIR TO DRAIN, PATH, HARD STANDING IN TECH AREA AND CLEANING OF SEPTIC TANK, MANHOLE AND SEWAGE LINE AT 274 SU, 756 SU AND MES AREA AT AF STN GORAKHPUR

Amount

Demolition of brick work built in cement or lime mortar etc complete all as specified and directed.

Dismantling brick or brick tiles laid bedded and pointed in any type of mortar etc complete all as specified and directed

M & L Brick work with sub class 'B' bricks, straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:4, complete all as specified and directed.

Labour only for Brick work with sub class 'B' bricks, straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:4 complete but except brick (using only serviceable Brick obtained from dismantling) all as specified and directed.

M&L bricks, sub class B, laid flat, bedded and jointed in CM 1:6 and pointed in CM 1:3 in drain, old size bricks, complete all as specified and directed.

Labour only for bricks, sub class B, laid flat, bedded and jointed in CM 1:6 and pointed in CM 1:3 in drain, old size bricks complete but except bricks ( only serviceable Brick obtained from dismantling), complete all as specified and directed.

Raking out joints/ pointing to brick work or brick tiles, laid flat, in floors, surface channels, roofs, etc built in cement mortar, complete all as specified and directed.

M&L for Keyed pointing to brick walls in cement sand mortar in 1:4, complete all as specified and directed.

Removal of down filled earth from drain and cleaning the bottom and side drain from mud vegetation and prepared the surface for smooth flow of water etc and removing the roots ,vegetation and mud up to 50 mtr from the periphery of the area complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided etc complete all as specified and directed.

M&L plain cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate in foundations, filling and mass-concrete, complete all as specified and directed.

M&L plain cement concrete (1:2:4) type B-2 using 20mm graded stone aggregate in surface channels and drains, complete all as specified and directed.

M&L Providing cement concrete 1:2:4 type B-0 using 12.5 mm graded stone aggregate in coping, fixing MS post at top of wall, roof Kerbs or mud stops, rounded or chamfered on edge including necessary form work complete all as specified and directed.

Demolition of cement concrete (reinforced) Concrete of any description and in any position not otherwise specifically provided for including reinforcement to cut as required to facilitate demolition, complete all as specified and directed.

M&L mild steel TMT bars 10 mm dia and over as reinforcement for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

Taking down cement or cement lime plaster brick or stone walls of any description including racking out joints hacking for key scrubbing down with water etc complete all as per specified and directed.

M&L for rendering 15 mm thick in cement mortar 1: 4 on faces of brick work or concrete surfaces, finished fair and even without using extra cement complete all as specified and directed.

M&L predation of newly plastered surfaces of wall, pilasters, cornices etc and applying two coat of exterior emulsion paint in camouflage pattern (two or more colour combination) over one coat of primer complete all as specified and as directed.

M&L predation of newly plastered surfaces of wall, pilasters, cornices etc and applying two coat of cement base paint over one coat of primer complete all as specified and as directed.

M&L preparing old decorated surfaces of wall by washing, rubbing down and stopping of painted surfaces and applying one coat of exterior emulsion paint in camouflage pattern complete all as specified and as directed.

M&L preparing old decorated surfaces of wall but complete removal of existing treatment and applying two coats exterior emulsion paint in camouflage pattern complete all as specified and as directed.

S&F chequered cement concrete tiles 20cmx20cmx25mm/ 30cmx30cmx25mm thick with gray cement and pigment, set, jointed and pointed in neat cement slurry in floors over and including 15 mm thick screed bed or bedding layer in CM 1:4, complete all as specified and directed.

M&L sand filling under floors or in foundation including watering and well ramming with consolidation of thickness, complete all as specified and directed.

S&F machine pressed rubber moulded precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade with grey cement and pigment, complete all as specified and directed.

M&L for Cement concrete type B- 2, 1:2:4 (40mm graded aggregate) 100 mm thick as in hard standing /pavement including finishing the surface fair and even without using extra cement complete all as specified and directed.

Supply only fine sand from approved quarries for small fire arm range, complete all as specified and directed.

Supply only saw dust of 2nd class hardwood for small fire arm range, complete all as specified and directed.

Labour only for mixing of sand and saw dust in appropriate ratio as directed by Engr-in-Charge and placing the mix on small fire arm range duly compacted through watering/ramming. Also removal of old waste material obtained from small fire arm range upto 100m from the location complete all as specified and directed.

M&L precast RCC 1:2:4 type B-1 (using 20mm graded stone aggregate) in cover slab set in cement mortar 1:6 including all necessary form work. (Note: Reinforcement shall be measured and paid separately), complete all as specified and directed.

Excavating in trenches, n exc 1.5m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sq m on plan and n exc 1.5m in depth and getting out in soft/loose soil, complete all as specified and directed.

Returning filling in soil including spreading leveling watering well ramming in layers nexc 25cm thick, complete all as specified and directed.

Removing excavated surplus soil not exceeding 50.00 m and depositing where directed at a level not exc 1.5 m above the starting point, complete all as specified and directed.

Taking out sludge from sump well, septic tank ,soak well etc manually and removal of sludge/silt/mud and sand etc,(in foul position) out side MOD premises complete all as specified and directed.250 M but n. exc 500 m and buried under ground digging/pit and leveling with necessary precaution to avoid fall of animals, complete all as specified and directed.

M&L Cleaning/ de-sludging, dewatering of manholes, rectangular or circular section not exc. 1.5 m depth. and removal of sludge/silt/mud and sand etc,(in foul position) out side MOD premises complete all as specified and directed.

M&L Dewatering of foul water and other floating materials of septic tanks, sump well, soak well, man holes etc by pumping or manually and cleaning of inlet and out let pipe incl throwing effluent using 100mtr delivery pipe complete all as specified & directed.

M&L for cleaning of chocked sewer line of Dia 100mm/ 150mm in any depth by hydraulic operative high pressure suction pump jetting sewer cleaning machine including skilled operator and supervisor for cleaning chocked sever line including water for jetting and removal of sludge/silt/ liquid/ mud and sand (in foul position) etc, out side MOD premises complete all as specified and directed NOTE :-1.Length of sever line Manhole to manhole measured for payment purpose. 2. A panel recovery of RS. 500.00 per complaint per day shall be imposed on contractor for not cleaning of sewer line by mechanical operated high pressure sewage cleaning machine within 7 days of intimating the complaint to the contractor by JE In charge.

M&L Cleaning of CI pipes/SWG pipe etc by roding 100 mm dia, connection pipe from WC to 1st Manhole, complete all as specified and directed.

Cleaning/de-sludging by Roding of gully trap/ connection pipe from gully trap to 1st manhole, complete all as specified and directed.

M&L Cleaning of nahani trap of any size up to 1st manhole, complete all as specified & directed.

Demolition and breaking drain pipe 150 mm Internal dia of pipe (salt glazed stoneware) set in cement mortar including packing under and haunching against side, complete all as specified and directed.

Demolition and breaking drain pipe 100 mm Internal dia of pipe (salt glazed stoneware) set in cement mortar including packing under and haunching against side, complete all as specified and directed.

M & L cement concrete bed to drain pipe of 150 mm internal dia including packing under and haunching against side of pipe after they are laid and tested in cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate, complete all as specified and directed.

M & L cement concrete bed to drain pipe of 100 mm internal dia including packing under and haunching against side of pipe after they are laid and tested in cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate, complete all as specified and directed.

Supplying, laying, jointing and testing Reinforced concrete pipes, class NP2, laid and jointed complete with collars150 mm internal dia , laid in trenches and jointed in cement mortar 1:1 complete all as specified and as directed

Supplying, laying, jointing and testing Reinforced concrete pipes, class NP2, laid and jointed complete with collars internal dia 100 mm , laid in trenches and jointed in cement mortar 1:1 complete all as specified and as directed

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground post embedded in cement concrete, complete all as specified and directed.

Taking down chain link fencing fixed to any type of standard rails, straining bolts etc complete all as specified and directed.

Dismantling of concertina coil 600mm dia any shape including razor wire of six linc etc all as specified and directed.Note :- Concertina coil and six link razor wire shall be measured as one Rm, complete all as specified and directed.

Dismantling Galvanized, 2 strand, steel barbed wire of any description, complete all as specified and directed.

M&L PCC 1:3:6 type C2 40mm graded stone aggregate as in fixing of fencing post and mass concrete, complete all as specified and directed.

S & F mild steel work as in posts and struts in fencing incl cutting tops to shape as directed, drilling holes, notching for wire, etc; flat iron fillets incl all necessary drilling, bolting or riveting etc and similar work confirming to Fe 290 Gd E-165. complete all as specified and as directed.

Supply only chain link MS galvanised fencing, any size or type of minimum dia 3.15 mm or above, complete all as specified and directed.(Note:- Weight of chain link fencing shall be decided through a B.O.O)

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standard rails, straining bolts etc. , complete all as specified and directed.

M&L for mild steel round bar 10 to 12mm dia confirming Fe-410-W (Gde.E-250) Fe 290 (Gde - E-165) as in stiffeners to chain link fencing etc all as specified and directed.

M&L Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing in repairs to any type of standard rails straining bolts, including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins etc. as directed (each line of wire to be measured), complete all as specified and directed.

Restraining, re-securing existing galvanised. 2 strand, steel barbed wire fencing of any description including making good staples etc, complete all as specified and directed.

M&L for two coat synthetic enamel paint over a coat of red oxide primer on new steel surface of any description over 10cm width or girth incl preparation, complete all as specified and directed.

S&F 610mm dia punched tape concertina coil with two handle and spikes at both end of coil with dovetail clips [18 SWG], incl razor wire [7 No], 6m length of each wire medium size, barbed length 20mm width 14mm, incl 51 pins, 128 Nos of clips in each coil incl 230gm/ Sqm Zinc coating on core wire, complete all as specified and directed.

Fixing only existing serviceable concertina coil and razor blade complete all as specified and directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc. , complete all as specified and directed.

S&F rolled mild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165, complete all as specified and directed.

M&L Cutting holes in brick walls built in cement mortar for inserting hold fasts exc one brick but not exc two brick, complete all as specified and directed.

M&L PCC 1:3:6 type C-1 as in filling in holes of hold fasts, complete all as specified and directed.

M/S GUPTA TRADERS

M/S NITISH ASSOCIATES

M/S SHAILZA TRADERS

DEEP ENTERPRISES

M/S P.S Mishra