REPAIRS/REPLACEMENT OF INTERNAL ELECTRIFICATION AT ZONE-I AT NURLA MIL STN UNDER AGE (I) NIMU

Amount

Taking down carefully circuit/ submain wiring for any description including DBs complete and all as specified and as directed by Engineer-in-Charge.

Taking down carefully aluminium point wiring light, fan socket or power complete fitting such as switches, ceiling rose, fan regulator, socket including light fitting etc complete with MS conduit and T/W battern and depositing to MES store yard all as specified and as directed by Engineer-in-Charge.

Supply and laying in repair submain wiring alongwith two single core cable PVC insulated and unsheathed cable with copper conductor FRLS (multistrand) of size 6 sqmm drawn in and including rigid PVC casing caping accessories lain on wall/ceiling surface and fixed with PVC saddles and back-plate and GI screws and including single core cable PVC insulated and unsheathed cable with copper conductor FRLS (multistrand) of 4 sq mm as earth wire complete all as specified & directed.

M&L in repair for point wiring with PVC insulated single core cable of stranded copper conductors of size 1.5 sqmm, 1100 volt grade drawn in and including rigid PVC casing caping accessories lain on wall/ceiling surface and fixed with PVC saddles and back-plate and GI screws, including PVC insulated single core cable of stranded copper conductor of size 1.5 sqmm as earth continuous wire connected to common earth and PVC Board for housing like switches, sockets, fan regulators etc all as directed for following :-

(a) One light point/one fan point controlled by one switch

(b) One 3 pin 5 amps socket outlet independent with cables 1.5 sqmm size

(c) One 3 pin 5 Amp socket outlet on same board.

(d) One bell/buzzers point controlled by one push button on the same board with other inner switches or independent with cable 1.5 sqmm size all as per specified and directed.

All same as per item No 4.01 above but with conductor of size 4 sqmm (Nominal area) for one 3 pin socket outlet 15 Amps on independent board complete and earth continuity wire with 4 sqmm PVC insulated stranded copper conductor Cable

S&F in repair Socket outlet 2 in 1, 3 pin, 5 and 15 amp flush type complete all as specified and directed.

S&F in repair socket 2 in 1, 5 pin 5 Amp flush type complete all as specified.

S & F in repair Switch piano, flush type single pole, one way 15 Amp

S&f in repair Switch socket combination 2 in 1, 3 pin, 5 Amp flush type complete all as specified and directed.

S&F in Repair switch Socket Combination 2 in 1, 3 pin, 15/16 amp flush type Universal complete all as specified and directed.

S&F in repair Modular switch piano 6 Amp, one way complete all as specified and directed.

S&F in repair Modular switch piano 16 Amp, one way complete all as specified and directed.

S&F in repair One 2/3 pin combined 6 Amp Module socket outlet complete all as specified and directed.

S&F in repair One 2/3 pin combined 6/16 Amp Module socket outlet complete all as specified and directed.

S & F in repair Modular switch socket combination 16 amp 6 pin ,3 mlodule flush type complete all as specified.

S & F in repair Modular switch socket combination 6 amp 6 pin ,3 mlodule flush type complete all as specified.

S & F in repair Module White/Black cover plate with frame, 6 module complete all as specified.

S & F in repair Switch Bell push, flush type, 5 amp complete.

S&F in repair bell ding dong, 230 V complete all as specified & directed.

M&L in repair for ceiling rose surface Bakelite 65x50mm two to three terminal complete all as specified and as directed by Engr-in-Charge.

S&F in repair Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings all as specified and directed .

S&F in repair hanging Lamp/pendent lamp/ceiling light/office light of 20 watt all as specified and directed .

Supply and Fixing in repair indoor LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed

Supply and fix in repair exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm complete all as per specified and as directed by Engr-in-Charge..

S & F in repair LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable sizecomplete all as per specified and as directed by Engr-in-Charge

S&F in repair basic all purpose surface and wall mounted LED batten with polycarbonate housing and integreted electronic driver of cap 20 watt, 4 feet long, with all accessories complete all as per specified and as directed by Engr-in-Charge.

S&F in repair sheet metal powder coated versatile double door SPN distribution board, 4 way suitable for MCB's fitted with copper bus bar rated 200amps, neutral link , earth bar and din rail suitable for use on 240 Volt, 50Hz complete all as per specified and as directed by Engr-in-Charge

S&F in repair sheet metal powder coated versatile double door SPN distribution board, 8 way suitable for MCB's fitted with copper bus bar rated 200amps, neutral link , earth bar and din rail suitable for use on 240 Volt, 50Hz complete all as per specified and as directed by Engr-in-Charge

S&F in repair sheet metal powder coated versatile double door SPN distribution board, 12 way suitable for MCB's fitted with copper bus bar rated 200amps, neutral link , earth bar and din rail suitable for use on 240 Volt, 50Hz complete all as per specified and as directed by Engr-in-Charge

M&L in repair for MCB SPN 63 Amp, 240V with 10KA breaking capacity of 'C' series in distribution boards complete all as per specified and as directed by Engr-in-Charge

M&L in repair for MCB SPN 40 Amp, 240V with 10KA breaking capacity of 'C' series in distribution boards complete all as per specified and as directed by Engr-in-Charge

S&F in repairs to MCB SP 6-32 Amp with 10KA breaking capacity of 'C' series in distribution boards complete all as per specified and as directed by Engr-in-Charge

Supply and fixing in repair 1100 Volts grade heavy duty cable PVC insulated aluminimum conductor of size 6 Sq mm twin core, served with inner sheathing of PVC tape and overall PVC sheathed in service connections, flat or circular complete all as per specified and as directed by Engr-in-Charge.

Earthing complete with galvanised steel earth plate electrode of size (600 x 600 x 6.3) mm thick buried directly into ground vertically to depth not less than 2.25 metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level, surrounded on all sides by alternate layers of 150 mm thick charcoal and common salt, connected to galvanized earh lead wire of size 4.0 mm by means of lugs, bolts, nuts, washer, check nuts of galvanised iron or steel all as shown in Electrical plate No. 3, wire protected by dia 15 mm bore light grade GI Pipe laid in floor and fixed to wall with proper size of clamps and watering pipe of bore 20 mm dia GI light grade including wire mesh funnel, PCC, earth chamber pit with PCC 1:2:4 type B-1 using 20 mm grade stone aggreate including form work cement mortar including CI Pit cover with frame necessary excavation and earth work in any type of soil including testing on completion for desired result complete all as per specified and as directed by Engr-in-Charge

JAI DURGA CONSTRUCTION CO (BID ID -3341169)

BETONG BUILDERS (BID ID -3341312)

N K BUILDERS (BID ID -3341676)

ABID CONSTRUCTION COMPANY (BID ID -3341851)