Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹32.1 LAccepted-AOC WARD NO 02 LAKHUWALI PO THE PILIBANGAN DISTT HANUMANGARH RAJASTHAN 335803 | HANUMANGARH | RAJASTHAN | 335803 | L1 | Accepted-AOC Due to lowest bidder | |
| 2 | L2₹38.6 L+₹6.1 L (18.8%)Rejected-Finance NEW ABADI KISHANPURA SURATGARH 335804 DISTT SRIGANGANGAR RAJ | GANGANAGAR | RAJASTHAN | 335804 | L2 | Rejected-Finance Due to not lowest bidder |
Tender Value
₹48.8 L
EMD Value
₹97,600
Closing Date
11 Oct 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (N) BIKANER
GE (N) BIKANER Rajasthan
PROVN OF SEPTIC TANK SOAKAGE WELLS AT NORTH CAMP AND SPL REPAIR TO CERTAIN BLDGS IN WEST AT MFFR UNDER GE N BIKANER
2023_MES_618882_1
GE (N) BKN-TOKEN/55/2023-24
Open Tender
Miscellaneous Works
Item Rate
270 days
MFFR Mahajan
As per Tender documents
6 documents required · 6 mandatory
₹500
GE (N) BIKANER
₹97,600
Yes
17 Jan 2024
14 Sept 2023
19 Oct 2023
14 Sept 2023
11 Oct 2023
29 Sept 2023
Amount
Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water complete all as specified.
Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings incl ridge complete
Taking down chowkats or frames with shutters (without taking off shutters from frames) area not exceeding 1.50 Square Metre each, including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt ), all as specified and directed by Engineer-in Charge.
Taking down shutters of any description exceeding 1 Sqm but not exceeding 2 Sqm each leaf complete all as specified and as directed by Engineer-in-Charge.
M&L for Hacking out old broken glass (any thickness, size, quality or description) from metal frames including punching or drilling out old glazing pins/spring clips including providing and fixing new ones complete all as specified and as directed by Engineer-in-Charge.
Demolition of brick/stone masonry built in CM.complete all as specified and as directed by Engineer-in-Charge.
Dismantling Wall and ceiling boards or insulation boards with Frame Of Mild Steel , any thickness,any description, including cover fillets complete all as specified and as directed by Engineer-in-Charge.
Taking up or down steel tubing 15 mm bore with connections for cleaning for refixing or removing to store yard complete all as specified and as directed by Engineer-in-Charge.
Taking up or down steel tubing 20 mm bore with connections for cleaning for refixing or removing to store yard complete all as specified and as directed by Engineer-in-Charge.
Dismantling100mm cast iron /PVC pipes fixed to walls or laid in trenches in any position complete all as specified and as directed by Engineer-in-Charge.
Dismantling water tanks and removing to store exc 500 and nexc 1000 ltrs complete all as specified and as directed by Engineer-in-Charge.
Excavation in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation etcor notexceeding 10 Sqm on plan and not exceeding 1.5m in depth for shafts, cesspits, manholes, pier holes,, etc and getting out in loose/soft soil complete..
Excavation in trenches in soft/loose soil not exceeding 1.5 m wide and not exceeding 1.5 m deep in foundations or for walls of manholes etc not exc 10 sqm on plan and exceeding 1.5 m in depth to 3.0 mtr and getting out complete all as specified and directed by Engineer-in-Charge.
Returning, filling in excavated approved soil, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm each layer complete all as specified and as directed by Engineer-in-Charge.
Removing excavated soil not exceedind 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed by Engineer-in-Charge.
Removing excavated soil/Demolished material to a distance n.exc 2.5 Km and depositing where directed at a level n.exc 1.5 above the starting point complete all as specified and as directed by Engr-in-charge.
Dismantling floor, heath or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified.
M&L for cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate in foundations, filling and mass concrete including base of manholes complete all as specified and as directed by Engineer-in-Charge.
M&L for Brick work with Burnt bricks old size straight or curved on plan exceeding 6m mean radius built in CM 1:6 complete all as specified and as directed by Engr-In-Charge.
M&L for Brick work with fly ash bricks old size straight or curved on plan exceeding 6m mean radius built in CM 1:6 complete all as specified and as directed by Engr-In-Charge.
M&L for Glazed ceramic coloured tiles in vertical surface 300x 200x 7mm/ 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match on 10mm thick screeding in CM 1:4 complete all as specified and as directed by Engineer-in-Charge.
M&L for 15mm thick cement plaster in cement and sand mortar 1:4 using water proofing compound as per manufacturer’s instructions on brick or concrete surfaces (surfaces fair or other than fair) including finishing the surfaces even & smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.
Supply only liquid water proofing compound ISI marked complete all as specified and as directed by Engineer-in-Charge.
M&L for 15mm thick Rendering in cement mortar 1: 6 on fair faces of brick work or concrete surfaces, finished fair and even complete all as specified and as directed by Engineer-in-Charge.
M&L for Preparing new plastered or unplastered surfaces of walls and applying two coats of oil Bound Distemper white or tinted over a coat of white wash complete all as specified and as directed by Engineer-in-Charge.
M&L for Preparing new plastered or unplastered surfaces of walls and applying two coats of cement paint white or tinted over a coat of white wash complete all as specified and as directed by Engineer-in-Charge.
M&L for Preparing old plastered or unplastered surfaces of walls and applying two coats of cement paint white or tinted over a coat of white wash complete all as specified and as directed by Engineer-in-Charge.
M&L for Preparing old plastered or unplastered surfaces of walls and applying two coats of oil Bound Distemper white or tinted over 3 mm coat of birla white putty a coat of white wash complete all as specified and as directed by Engineer-in-Charge.
S&F 3mm sheet glass, ordinary quality and glazing with oil putty in squre n exc 0.5sqm in each pane but forsted complete all as specified and as directed by Engineer-in-Charge.
Providing cement concrete 1:3:6 type C-1 using 20mm graded stone aggregate in cills, bed block, copings,bed plates, bond stone, etc including weathering, slightiy rounded or chamfered angles and throating as directed including necessary form work complete.
M&L for preparation new or previous untreated steel & iron surfaces of any description over 10cm in with or grith and applying two coats of synthetic enamel paid over & including a coat of red oxide primer complete.
M&L 5cm thick sand stone slabs in shelves, chajjas, shelves etc n exc 2m in length set and pinted in CM 1:4 complete all as specified and as directed by Engineer-in-Charge.
S&F in repairs Vitreous china wash basin, white, flat back, size 550 x 400mm, including brackets and cutting for and pinning in ends of brackets, fixed in repairs including 32mm bore brass chromium plated waste fitting ,32mm bore PVC waste pipe of sufficient length and pedestal complete.
S&F PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floors, 110mm bore complete all as specified and as directed by Engineer-in-Charge.
S&F PVC (SWR) pipes, single socketed,in any length with rubber ring joints, fixed to walls, 75mm bore complete all as specified and as directed by Engineer-in-Charge.
S&F PVC (SWR) bends any radius, 110mm bore complete all as specified and as directed by Engineer-in-Charge.
S&F PVC (SWR) couplers, 110mm bore complete all as specified and as directed by Engineer-in-Charge.
M&L for 15mm bore steel water tubes, medium grade. ISI marked, galvanised with all fittings, fixed to walls and ceilling or laid in floors complete all as specified and as directed by Engineer-in-Charge.
M&L for 20mm bore steel water tubes, medium grade. ISI marked, galvanised with all fittings, fixed to walls and ceilling or laid in floors complete all as specified and as directed by Engineer-in-Charge.
S&F Rotational moulded polythene water storage tanks (cylindrical vertical with closed top) of 1000 litres capacity, hoisted and fixed in position including connecting up pipes complete all as specified and as directed by Engineer-in-Charge.
S&F Bib taps cast copper alloy Chromium Plated with crutch or butterfly handle, fancy type, screwed down, screwed for iron pipe or for brass ferrule 15mm bore complete all as specified and as directed by Engineer-in-Charge.
S&F pillar tapes, cast copper alloy, with capstan heads, fancy type, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe 15mm bore complete all as specified and as directed by Engineer-in-Charge.
S&F angle valve cast copper alloy, screwed down, high pressure, with crutch or butter fly handle, fancy type, chromium plated, with long shank and cup (concealed type) screwed both ends for iron pipe or for unions 15mm bore complete all as specified and as directed by Engineer-in-Charge.
S&F Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of 20 mm bore (Minimum weight 210 gms) complete all as specified and as directed by Engineer-in-Charge.
S&F PVC connection 15 mm size with PTMT nuts of length 450 mm complete all as specified and as directed by Engineer-in-Charge.
S&F Steel ventilators with top hung shutter including hinges, steel peg stay complete all as specified and as directed by Engineer-in-Charge.
S&F Aluminium anodised barrel tower bolts of extruded section, 150 mm long complete all as specified and as directed by Engineer-in-Charge.
S&F Aluminium alloy, anodised, sliding door bolt 250 mm long, with haps, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed by Engineer-in-Charge.
S&F Butt hinges, medium weight, cold rolled mild steel, 100 mm size complete all as specified and as directed by Engineer-in-Charge.
S&F Extruded aluminium alloy handles, fabricated type, anodised, 150 mm size complete all as specified and as directed by Engineer-in-Charge.
M&L 18-20 mm thick machine cut kota stone slab as in flooring, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing over and including 20mm thick screed bed in cement and sand mortar 1:6 complete all as specified and as directed by Engineer-in-Charge.
M&L 18-20 mm thick machine cut kota stone slab as in skirting/dado etc laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing over and including 10mm thick screed bed in cement and sand mortar 1:4 complete all as specified and as directed by Engr-in-Charge.
Mirror polishing on marble/ granite/Kota stone/ stone work where ever required to give high gloss finish complete all as specified and as directed by Engineer-in-Charge.
M&L for 1.25 mm thick MS Pressed steel frames of size 105mm x 60mm, for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. complete as specified supply and fixed complete all as specified and as directed by Engineer-in-Charge.
S&F Pressed steel frames for door with one or more rebates including necessary fixing lugs, hinges,lock strike plate of profile 125x60mm complete all as specified and as directed by Engineer-in-Charge.
MS work as in hold hast complete all as specified and as directed by Engineer-in-Charge.
S&F 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed by Engineer-in-Charge.
M&L for painting to new wooden surface over 10cm width or girth with two coat of synthetic enamel paint over a coat of pink primer.complete all as specified and as directed by Engineer-in-Charge.
S&F 3mm thick Sheet glass , ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane complete all as specified and as directed by Engineer-in-Charge.
S&F 4mm thick Sheet glass , ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane complete all as specified and as directed by Engineer-in-Charge.
S&F stainless steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm, fixed with tinned tacks or galvanised wire staples complete all as specified and as directed by Engineer-in-Charge.
Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161- 1979 grade St-240, conforming to Fe- 290 Gde E-165 complete as directed by Engineer-in-Charge and all as specified.
Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe-290 Gde E-165 all as specified and as directed by Engineer-in-Charge.
Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt not exceeding 5 cm and dia of shank 5 to 10 mm complete all as specified and as directed by Engineer-in-Charge.
M&L for framed worked as in doors or gates of angle or other section with gusset angle chowkhat , plates,rails braces etc. incl all necessary drilling,welding,bolting or riveting etc. complete and door for hanging and fastening and fixing complete Fr-290 (Gde-165) comp. all as specified .
S & F Pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws as complete all as specified and as directed by Engineer-in-Charge.
S & F Pre-painted galvatume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and as directed by Engineer-in-Charge.
supply and fixing Gl frame work of size of grid 605 X 605mm for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre and gypsum board 12mm thick false ceiling board in grid as per specification complete all as specified and directed by Engineer-in-charge.
S& F Harrison rails,mild steel,curtain rod chromium plated with fixing brackets, stops, rollers complete all as specified and as directed by Engineer-in-Charge.
M & L Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed by Engineer-in-Charge.
Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed by Engineer-in-Charge.
Anodised aluminium frame and Shutter for doors, windows, ventilators with one or more rebates including joining cleat, Deko Grill , Partitions etc for fixing complete all as specified and directed by Engineer-in-charge.
S&F sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed by Engineer-in-Charge.
M&L Cement concrete (1:4:8) type D-2 using 40 mm graded stone aggregate as in packing under and hunching against the sides of pipes, without bedding layer, after they are laid and tested in 150 mm dia of pipe complete all as specified
M & L for DWCPE (SN8)180(OD)/163(ID) mm diameter pipes laid on 150mm thick bed with excavation in any type of soil, including manholes / drop manhole of standard size made of Brick masonry / RCC / Precast RCC with SFRC ventilating cover and frame. Includes all items and activities to execute and make sewer line functional for 0.70m - 1.65m depth complete all as specified and as directed by Engineer-in-Charge.
S&L for Salt glazed stone were drain pipes, grade ‘A’ 150 mm bore (internal dia) laid in trenches over existing complete all as specified and as directed by Engineer-in-Charge.
M&L for Jodhpur stone of roof slab self faced ,7.5cm to 10 cm thick ,25 cm to 35cm wide ,hoisted and set ,jointed and grouted in cement and sand mortar (1:6) complete all as specified and as directed by Engineer-in-Charge.
M&L for 50mm thick P.C.C 1:3:6 C2 using 40 mm graded stone agg. As in floors over stone patti roof slab finished the surface even and fair complete all as specified and as directed by Engineer-in-Charge.
Cutting into existing manholes or connecting new, drains making good existing benching or forming channel and reforming benching with cement and sand mortar 1:4 or PCC 1:2:4 type B-1 smooth finished and reforming benching as in 150 mm dia of pipe complete all as specified and as directed by Engineer-in-Charge
P.C.C (1:2:4) type B-2 using 40 mm graded stone aggregate as in surface channels and drains etc inside the manholes complete all as specified and directed by Engineer-in-Charge.
M&L for 75mm thick Cement concrete 1:3:6 type C2 using 40mm graded stone aggregate in plinth protection, , finished even and smooth using extra cement , laid in panels including making joints 12mm wide to the full depth of PCC at every 3 metres and at every change of direction and filling the same with & including bitumen and sand 1:3 by weight complete all as specified and as directed by Engineer-in-Charge.
Providing precast reinforced cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in cover slabs (for manholes etc), shelves and similar articles with plain faces including necessary moulds and setting in cement mortar 1:4 complete (reinforcement to be measured separately)
M&L for Mild steel TMT bars 10mm dia and over as reinforcement for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed by Engineer-in-Charge.
M&L for Providing cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in copings etc. including weathering, slightly rounded or chamfered angles and throating as directed including necessary form work complete all as specified and as directed by Engineer-in-Charge.
S&F Salt-glazed stoneware gully traps, square or round mouthed size 150x150 mm , tvpe 'P' complete all as specified and as directed by Engineer-in-Charge.
M&L for Soakage well of size 1.2m dia and 3 m effective depth, excavation in any type of soil, foundation in PCC 1:3:6, walls of honeycomned masonary with top ring of RCC concrete including intercepting camber and screen chamber made of brick masonary in CM, RCC cover slab, interconnecting pipes complete all as specified and as directed by Engineer-in-Charge.
M & L Soakage well excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete ncluding intercepting chamber and screen chamber made of Brick masonry in CM, RCC cover slab in M25/ SFRC cover, inter connecting pipes of RCC / DWC complete filled with brick bats of size Top dia 4.00 mtr M bottom dia 2.00 mtr dia x 7.5 m effective depth. for 25 user BTD-830 complete all as specified and as directed by Engineer-in-Charge.
M & L for conventional RCC Septic tank designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, RCC M-30 Design Mix in Walls, Base Slab, Baffle Walls and Roof Slab including beams etc with Vent shaft, manhole openings with cover connection etc., complete with effective depth of 1.5 meter and overall depth of 3 meter for 50 users DWG BTD-016 complete all as specified and as directed by Engineer-in-Charge.
Taking down carefully existing unserviceable Copper/aluminum batten/surface conduit/concealed conduit point wiring (light, fan, bell/buzzer, socket or power) complete including removal of unserviceable fittings such as switches, switch-sockets, ceiling roses, pendents, sockets, lamp holders, shades, fan regulators, light fittings, bells etc (including old MS sunken boxes) and removing the retrieved materials from dismantling including making good the disturbed surface of walls, floors, ceilings etc complete all as specified and as directed by the Engr-in-Charge.
Taking down of unserviceable DBs/switch fuses/changeover in sheet steel enclosure complete with MCBs/Fuse/grips any capacity and removing from site and making good disturbed surface of wall, floor etc. Taking after disconnecting all cable complete all as specified and as directed by the Engr-in-Charge.
Point wiring with stranded copper conductor cable, 1100 volts grade (ISI marked) PVC insulated and unsheathed of size 1.5 Sq mm single core in and including new non-metallic rigid PVC concealed conduit, not less than 20 mm dia, medium duty ISI marked, including conduit fittings such as tees, bends etc terminating in and including new sunken box covered with and including 3 mm thick bakelite laminated sheet top cover of approved make for one fan or light or exhaust fan or bell/buzzer point controlled by one switch including provision of 1.5 Sqmm PVC insulated unsheathed copper conductor cable, multi stranded as earth wire to common earth & connecting to earth dolly complete all as specified and directed by Engineer-in-Charge.
Ditto all as per item No 92 here-in-before but socket point on the same board with other switches complete as specifed as directed by Engineer - In - Charge
Ditto all as per item No 92 here-in-before but socket point on indpendent board complete as specifed as directed by Engineer - In - Charge
Ditto all as per item No 92 here-in-before but cable 2.5 Sqmm for 15 Amps switch socket outlet on independent board complete as specifed as directed by Engineer - In - Charge
S&F Switch piano flush type, Single pole 5 Amps, one way ISI marked, complete all as specified and as directed by Engineer-in-Charge
S&F Socket outlet 2 in 1, flush type, 3 pin, 5 Amps, ISI marked, complete all as specified and as directed by Engineer-in-Charge.
S&F Lamp holder insulated body with back plate for conduit/casing capping fittings complete all as specified and as directed by Engineer-in-Charge Make CG/Havells/Phillips.
S&F Ceiling rose PVC/poly carbonate insulated body three terminal ISI marked, complete all as specified and as directed by Engineer-in-Charge.
Supply & fix LED bulk head ,09W / 10 W, IP65 diacast aluminium housing powder coating finished complete all as specified and directed by Engineer-in-charge.
S&F switch socket combination 5 in 1, 5/16 amp flush type fixed on laminated sheet top cover (laminated sheet top cover is including in point wiring) complete all as specified and directed by Engineer-in-charge.
S&F Fan regulator electronic type, 230 Volt, 150 Watt with 5 step of control including making holes in laminated bakelite sheet cover and connection complete all as specified and as directed by Engineer-in-Charge.
S&F Decorative ultra slim linear LED lightening fixture, energy efficent 18 Watt complete all as specified and directed by engineer-in-charge.
S&F Sheet metal enclosure for distribution boards, suitable for fixing MCBs 240 volts with 200 Amps rated bus bar, SPN, 12 ways double door , supplied and fixed in repair, including making good the disturbed surface of wall, complete all as specified and as directed by Engineer-in-Charge.
S&F MCB suitable for 6 to 32 Amps, 240 Volt AC supply single pole and neutral with over load and short circuit protection having rupturing capacity not less than 10 KA complete all as specified and as directed by Engineer-in-Charge.
S&F MCB single pole, 240 volts of rating 6-32 Amps, breaking capacity of 10 KA complete all as specified and as directed by Engineer-in-Charge
Supply and laying in replacement cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10.00 sq mm 2 corecomplete all as specified and directed by Engineer-in-charge.
Protection to cable with one layer of bricks laid flat butting to each other in such a way that the length of the bricks is at right angle to the central axis of the cable using old size sub-class 'B' bricks complete all as specified and directed by Engr-in-charge.
M&L Local tibba dry sand cushioning for protection of cable complete all as specified and as directed by Engineer-in-charge. Note Local approved tibba dry sand after removal of vegetations, grass and other deleterious substances shall be used for sand cushioning complete all as specified and directed by Engineer-in-charge.
M & L GI tubing light grade for protection of cables with pole/ in ground of size 40mm dia complete all as specified and as directed by Engineer-in-Charge.
M&L Earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below normal ground level surrounded from all sides by 15 cm thick packed layer of charcoal dust and common salt filling in alternate layers and electrode connections by mean of GI wire 4 mm dia by means of bolts, nuts check nuts and washers of GI or steel and connecting to main switch board, testing on completion including GI pipe 20 mm dia light grade for watering and bringing the same upto 30 cm above normal ground level with plug at top including pipe fittings etc complete and GI pipe 15 mm dia light grade for the protection of GI wire from earth pit to earth point complete including necessary excavation and earth work in any type of soil, returning, filling in approved soil and disposal of surplus soil to a distance n.exc 50 m all as specified as shown in electrical plate No 3 SSR Part-I.
Taking down Exhaust/fan, sealing cable end, dismantling blades and removing fan and blades to store complete all as specified and directed by Engineer-in-Charge.
Hanging only ceiling Exhaust/fan taking down vide item ser no 27 and connecting up with provn of 3 core of flexible cable of size 1.5 sqmm after complete rewinding ,over hauling, minor repair as required,painting and to make serviceable with replacement of bearing/ capacitor etc. complete all as specified and as directed by Engr-in-charge.
M/s JUGAL KISHORE MISHRA AND SONS
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .