Renovation of recreational area and toilet block along with electrical and plumbing works at RO Lucknow.

CENTRAL WAREHOUSING CORPORATION (A Govt. of India Undertaking)

Sub-Schedule-I Civil DSR 2023

NIT Number CWC/RO-LKO/Engg./26-27/19T

Name of Work Renovation of recreational area and toilet block along with electrical and plumbing works at RO Lucknow

NAME OF CONTRACTOR

Sr.No. Name of Work Total Amount (In Rs.) Quoted rates (Above/Below/At par) Rate to be quoted in percentage(%) Quoted % In Words Quoted amount in figure

1 Sub-Schedule-I Civil DSR 2023 2441736.63

TOTAL QUOTED PRICE=

Amount Quoted (In Words)

Note Total CWC estimated Cost for this schedule including Cost Index, labour cess & applicable GST (Rs.) ₹ 23,27,166.73

CENTRAL WAREHOUSING CORPORATION (A Govt. of India Undertaking)

Sub-Schedule -II: Civil MR ITEMS

NIT Number CWC/RO-LKO/Engg./26-27/19T

Name of Work Renovation of recreational area and toilet block along with electrical and plumbing works at RO Lucknow

NAME OF CONTRACTOR

Sr.No. Name of Work Total Amount (In Rs.) Quoted rates (Above/Below/At par) Rate to be quoted in percentage(%) Quoted % In Words Quoted amount in figure

1 Sub-Schedule -II: Civil MR ITEMS 400603.56

TOTAL QUOTED PRICE=

Amount Quoted (In Words)

Note Total CWC estimated Cost for this schedule including Cost Index, labour cess & applicable GST (Rs.) ₹ 4,00,603.56

CENTRAL WAREHOUSING CORPORATION (A Govt. of India Undertaking)

Sub-Schedule-III E&M DSR 2025

NIT Number CWC/RO-LKO/Engg./26-27/19T

Name of Work Renovation of recreational area and toilet block along with electrical and plumbing works at RO Lucknow

NAME OF CONTRACTOR

Sr.No. Name of Work Total Amount (In Rs.) Quoted rates (Above/Below/At par) Rate to be quoted in percentage(%) Quoted % In Words Quoted amount in figure

1 Sub-Schedule-III E&M DSR 2025 240046

TOTAL QUOTED PRICE=

Amount Quoted (In Words)

Note Total CWC estimated Cost for this schedule including Cost Index, labour cess & applicable GST (Rs.) ₹ 2,40,046.00

CENTRAL WAREHOUSING CORPORATION (A Govt. of India Undertaking)

Sub-Schedule-IV E&M MR

NIT Number CWC/RO-LKO/Engg./26-27/19T

Name of Work Renovation of recreational area and toilet block along with electrical and plumbing works at RO Lucknow

NAME OF CONTRACTOR

Sr.No. Name of Work Total Amount (In Rs.) Quoted rates (Above/Below/At par) Rate to be quoted in percentage(%) Quoted % In Words Quoted amount in figure

1 Sub-Schedule-IV E&M MR 159499

TOTAL QUOTED PRICE=

Amount Quoted (In Words)

Note Total CWC estimated Cost for this schedule including Cost Index, labour cess & applicable GST (Rs.) ₹ 1,59,499.00

CENTRAL WAREHOUSING CORPORATION (A Govt. of India Undertaking)

Price Bid ( Summary Sheet)

NIT Number CWC/RO-LKO/Engg./26-27/19T

Name of Work Renovation of recreational area and toilet block along with electrical and plumbing works at RO Lucknow

NAME OF CONTRACTOR

Sd.-I SCH_I (Civil DSR 2023)

Sd.-II Sch_II (Civil MR)

Sd.-III SCH_III (E&M DSR 2025)

Sd.-IV Sch_IV (E&M MR)

Grand Total (In Figures)

Grand Total (In Words)

CENTRAL WAREHOUSING CORPORATION

(A Govt.of India Undertaking)

SCHEDULE OF QUANTITY

Name of work : Renovation of recreational area and toilet block along with electrical and plumbing works at RO Lucknow

Schedule I DSR 2023 based Civil Items

SLNo Description Qty Unit Rate Amount DSR- No.

1 Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. 32.1 cum 263.95 15.6

2 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. 180.3 sqm 54.65 15.56

3 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : 1.66 cum. 6.4.2

4 15 mm cement plaster on the rough side of single or half brick wall of mix : 208.22 sqm. 399.45 13.2.1

5 Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3(1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 140.7 sqm 8.31

6 Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. 11.41A

6.1 Glazed Vitrified tiles Matt/Antiskid finish of size 11.41A.3

7 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 12.41

7.1 75 mm diameter 160 metre 12.41.1

7.2 110 mm diameter 220 metre 12.41.2

8 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS :5382, leaving 10 mm gap for thermal expansion. 12.42

8.1 Coupler 12.42.1

8.2 Single tee with door 12.42.3

8.3 Single tee without door 12.42.4

9 Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 12.43

10 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : 17.2

10.1 W.C. pan with ISI marked white solid plastic seat and lid 11 each 17.2.1

11 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: 17.7

11.1 White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps 17 each 2648.85 17.7.1

12 Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. 11 each 17.16A

13 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 17.28

13.1 Flexible pipe 17.28.2

15 Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. 5 each 17.33

16 Providing and fixing toilet paper holder : 17.34

17 Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. 11 each 168.35 17.71

18 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 17.73

18.1 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms 11 each 17.73.1

19 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply and all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 18.7

19.1 25 mm nominal dia Pipes 38 metre 401.55 18.7.3

19.2 32 mm nominal dia Pipes 60 metre 518.75 18.7.4

19.3 40 mm nominal dia Pipes 85 metre 18.7.5

19.4 50 mm nominal dia Pipes 57 metre 18.7.6

20 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 18.8

20.1 20 mm nominal dia Pipes 73 metre 18.8.2

20.2 25 mm nominal dia Pipes 68 metre 18.8.3

20.3 32 mm nominal dia Pipes 34 metre 739.3 18.8.4

21 Providing and fixing uplasticised PVC connection pipe with brass unions : 18.21

21.1 45 cm length 18.21.2

21.1.1 15 mm nominal bore 33 each 18.21.2.1

21.1.2 20 mm nominal bore 55 each 119.05 18.21.2.2

22 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 20000 per litre 11 18.48

23 Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 18.51

23.1 15 mm nominal bore 28 each 798.95 18.51.1

24 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 18.53

24.1 15 mm nominal bore 45 each 18.53.1

25 Providing and fixing C.P. Brass extension nipple (size 15 mm x 50 mm) of approved make and quality as per direction of Engineer-in-charge. 45 each 18.53A

26 Providing and fixing PTMT grating of approved quality and colour. 18.58

26.1 Circular type 18.58.1

26.1.1 125 mm nominal dia with 25 mm waste hole 45 each 18.58.1.2

27 Providing and fixing S.W. intercepting trap in manholes with stiff mixture of cement mortar 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 19.34

28 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete 279 sqm 13.8

33 Finishing walls with Acrylic Smooth exterior paint of required shade : 13.46

33.1 New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) 279 sqm 160.6 13.46.1

34 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : 21.1

34.1 For fixed portion 21.1.1

34.1.1 Powder coated aluminium (minimum thickness of powder coating 50 micron) 409.73 kg 530.9 21.1.1.2

34.2 For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) 21.1.2

34.2.1 Powder coated aluminium (minimum thickness of powder coating 50 micron) 24.67 kg 634.45 21.1.2.2

35 Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. 21.2

35.1 Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side 61.95 sqm 1139.3 21.2.1

36 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): 21.3

36.1 With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) 50.31 sqm 1505.25 21.3.2

37 Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer in- charge. 21.4

37.1 With stainless steel cover plate minimum 1.25 mm thickness 3 each 2823.85 21.4.1

38 Providing and fixing aluminium tubular handle bar 32 mm outer dia, 3.0 mm thick & 2100 mm long with SS screws etc .complete as per direction of Engineer-in-Charge. 21.12

38.1 Powder coated minimum thickness 50 micron aluminium tubular handle bar 6 each 631.55 21.12.2

39 Providing and fixing Brass 100 mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete. 3 each 528.85 21.13

40 Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : 9.74

41 Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. 3 each 121.65 9.82

42 Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. 14.1

42.1 With cement mortar 1:4 (1cement: 4 coarse sand) 9.05 sqm 560.5 14.1.2

43 Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : 15.12

43.1 Of area 3 sq. metres and below 11 each 367.2 15.12.1

44 Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance ±1mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1 mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer’s specification and direction of Engineerin- charge 9.117

44.1 Extruded section profile size 48x40 mm 57.2 metre 270.2 9.117.1

45 Providing and fixing to existing door frames. 9.118

45.1 30 mm thick factory made Polyvinyl Chloride (PVC) door shutter made of styles and rails of a uPVC hollow section of size 60x30 mm and wall thickness 2 mm (± 0.2 mm), with inbuilt decorative moulding edging on one side. The styles and rails mitred and joint at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 25x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of ‘H’ section, a uPVC hollow section of size 100x30 mm and 2 mm (± 0.2 mm) wall thickness fixed to the shutter styles by means of plastic/ galvanised M.S. ‘U’ cleats. The shutter frame filled with a uPVC multichambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness . The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer’s specification and direction of Engineer-incharge. 18.48 sqm 3253.8 9.118.2

46 Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 18.52

46.1 15 mm nominal bore 28 670.45 18.52.1

47 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. 11 1607.95 17.31

48 Providing and fixing gun metal non- return valve of approved quality (screwed end) : 18.19

48.1 32 mm nominal bore 18.19.2

48.1.1 Horizontal 11 each 791.9 18.19.2.1

48.1.2 Vertical 11 each 850.25 18.19.2.2

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. 15.23

51.1 For thickness of tiles 10 mm to 25 mm 213.24 sqm 73.4 15.23.1

52 Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead : 15.42

52.1 100 mm dia pipe 80 metre 78 15.42.2

53 Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineerin- charge. 72.54 sqn 56.35 15.57

54 Providing & fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Non combustible as per BS 476 (part 4)-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter-locking metal T-Grid of hot dipped galvanised iron section of 0.33 mm thick (galvanized @ 120 gram per sqm including both sides) comprising of main-T runners of size 15x32 mm of length 3000 mm, cross - T of size 15x32 mm of length 1200 mm and secondary intermediate cross-T of size 15x32 mm of length 600 mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2 mm. Galvanised iron perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge. 72.54 sqm 1852.05 26.26.1

55 Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth. 8.1

55.1 White Agaria Marble Stone 9 sqm 3500.45 8.10.1

56 Supplying and stacking at site. 16.3

56.1 Over burnt (Jhama) brick aggregate 90 mm to 45 mm 18.14 cum 872.05 16.3.5

57 including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: (a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. (b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs. (c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge. (d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. (e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. “All above operations to be done in order and as directed and specified by the Engineer-in-Charge”: 22.7

57.1 With average thickness of 120 mm and minimum thickness at khurra as 65 mm. 72.54 sqm 1684.6 22.7.1

58 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 4.1

58.1 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) 5.45 cum 8340.85 4.1.2

59 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 9.21

59.1 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws 22.26 sqm 2392.65 9.21.1

60 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : 17.4

60.1 One urinal basin with 5 litre white P.V.C. automatic flushing cistern 17 each 6258.75 17.4.1

61 Providing and fixing CP Brass 32 mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge. 17 each 1034.8 17.22A

62 Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : 17.6

62.1 100 mm inlet and 75 mm outlet 17.60.2

62.1.1. Sand Cast Iron S&S as per IS- 1729 22 each 1558.35 17.60.2.2

Modified Estimated Cost after using correction factor on DSR 2023 on account of GST @ 0.973

CENTRAL WAREHOUSING CORPORATION

(A Govt.of India Undertaking)

SCHEDULE OF QUANTITY

Name of work : Renovation of recreational area and toilet block along with electrical and plumbing works at RO Lucknow

Schedule II MR based Civil Items

SLNo Description Qty Unit Rate Amount DSR No./MR

1 Providing and fixing premium-quality pre-laminated interlocking PVC Wall Paneling of approved make, design, shade, and texture, having a minimum overall thickness of [Insert thickness, e.g., 7mm / 9mm], conforming to relevant IS codes for fire retardancy, water absorption, and environmental safety. 120 sqm 1499 15.6

2 Providing and laying high-density, recycled SBR crumb rubber flooring tiles/mats of approved make, color, and finish, having a minimum overall thickness of [Insert thickness, e.g., 15mm / 20mm], specially engineered for gym and fitness weight-lifting applications with high shock-absorption, sound insulation, and anti-slip properties conforming to fitness flooring standards. 140 sqm 1656 15.56

CENTRAL WAREHOUSING CORPORATION

(A Govt.of India Undertaking)

SCHEDULE OF QUANTITY

Name of work : Renovation of recreational area and toilet block along with electrical and plumbing works at RO Lucknow

Schedule III DSR 2025 based E&M Items

SLNo Description Qty Unit Rate Amount DSR- No.

1 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

1.1 Group C 40 Point 1704 1.10.3

2 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

2.1 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire 187 Metre 311 1.14.2

2.2 2 X 4 sq. mm + 1 X 4 sq. mm earth wire 207 Metre 373 1.14.3

3 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 1.24

3.2 6 pin 15/16 A socket outlet 20 Each 219 1.24.5

4 Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. 1.27

4.1 1 or 2 Module (75mmX75mm) 13 Each 354 1.27.1

4.2 3 Module (100mmX75mm) 20 Each 401 1.27.3

5 Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required. 20 Each 104 1.33

6 Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required. 1.55

6.1 Group C 14 Point 994 1.55.3

CENTRAL WAREHOUSING CORPORATION

(A Govt.of India Undertaking)

SCHEDULE OF QUANTITY

Name of work : Renovation of recreational area and toilet block along with electrical and plumbing works at RO Lucknow

Schedule IV MR based E&M Items

SLNo Description Qty Unit Rate Amount DSR No./MR

1 Supply and fixing of 4 ft led 20 watt white tube light with temp. 6500 kelvin make Havelles, Bajaj 7 Each 497 MR

2 SITC of Panasonic 9W LED Concealed Downlight for Ceiling | LED Deep Junction & Concealed Box Light (Cool White, PDLM15097) make bajaj, crompton 34 Each 230 MR

3 SITC of Murphy 12W 3-in-1 Color Chnaging Wooden Finish LED Mirror Picture Wall Light,Bathroom Vanity Led Mirror Light with 2 Year Warranty (Cool White/Warm White/Natural White 13 Each 1550 MR

4 SITC of BLDC 250mm exhaust Fan 13 Each 1850 MR

5 SITC of TerraCare AirSense Pro Automatic Hand Dryer, Wall Mounted, ABS Body, Induction Sensor, 10–12 Sec Fast Dry, 1100W, Low Noise, 220V 50Hz for Washroom, Office & Home Use (Matte Black) 13 Each 8000 MR

Central Warehousing Corporation (A Govt. of India Undertaking)

REGIONAL OFFICE

Pre-Qualifying (PQ) Proforma: Bidder Information Summary {To be Filled by Bidder in sheet uploaded over portal and then to be submitted along with technical bid}

ENIT NO:CWC/RO-LKO/Engg./26-27/19T

Name of Work :- Renovation of recreational area and toilet block along with electrical and plumbing works at RO Lucknow

Name of the Bidder *Mandatory

SL Description Details (filled by Bidder)

See PQC S/n (1) to (4): Appendix-II of NIT

1 Name of the Bidder

1.1 Bidder Address, (registered)

1.2 Bidder Organization ID /CIN in case of Company

1.3 Bidder Telephone number

1.4 Bidder E-mail address

2 Type of Bidder constituent (Organization)

(JV not allowed where estimated cost of work put on Tender is up to Rs. 30 cr)

2.1 Attested copy of documents in support of Bidder Organization Type

(See ITB-Appendix IV clause number 3.2: 1 (b): Organization Details and Appendix-II of NIT: List of documents required in support of Bidder Legal Entity.

2.2 Current List of Directors/Partners: as applicable

3 Name of the person holding the power of attorney for this Bid

3.1 Designation

3.2 Contact details of person holding the power of attorney

3.3 Attested Copy of Power of Attorney to sign & submit the Tender (as per format given in EXHIBIT-III of Appendix-II)

4 Earnest Money Deposit (EMD) of Amount as mentioned in APPENDIX-1 (TIS) through NEFT/RTGS

5.1 PF Registration code number of Bidder

5.2 COPY of PF Registration number of Bidder

6.1 GST Registration code number of Bidder

6.2 COPY of GST Registration number of Bidder

7.1 PAN of the Bidder

7.2 COPY of PAN of Bidder

8.1 Whether Enlisted /Empaneled with CPWD/ MES/ Railway/ PWD/ CWC/any other PSU etc. if any,

8.2 Copy of Enlistment/Empanelment certificate Submitted or Not

9 Whether Bidder is executing or completed any work awarded by CENTRAL WAREHOUSING CORPORATION in Past Three FY Year (FY 2023-24, FY 2024-25 & FY 2025-26) and Current FY 2026-27.

10.1 Affidavit along with this PQ Performa (EXHIBIT-I) on NJS paper signed and submitted after filling necessary details.

10.2 Declaration of near relatives (EXHIBIT-IV) submitted.

Technical Eligibility Criteria:

See PQC S/n (5) in Appendix-II of NIT for details & qualifying limits.

11 Particular Technical Experience w.r.t. Similar Nature of Work:

11.1 Brief of Similar Nature Work Experience-1

I Work order/ contract agreement ref number and date

Ii Name of client issued the work order and completion certificate

iii Completion certificate -ref number and date

iv Total value of work completed (Rs.)

V Stipulated date of completion

vi Actual date of completion

vii If LD is levied: Amount / period of delay for which Liquidity damage is levied by client (if any)

viii Copy of completion/experience certificate of work and Copy of Agreement/Workorder issued by Client is submitted as per format given in EXHIBIT-V or EXHIBIT-VI or EXHIBIT-VII as applicable

11.2 Brief of Similar Nature Work Experience-2

I Work order/ contract agreement ref number and date

Ii Name of client issued the work order and completion certificate

iii Completion certificate -ref number and date

iv Total value of work completed (Rs.)

V Stipulated date of completion

vi Actual date of completion

vii If LD is levied: Amount / period of delay for which Liquidity damage is levied by client (if any)

viii Copy of completion/experience certificate of work and Copy of Agreement/Workorder issued by Client is submitted as per format given in EXHIBIT-V or EXHIBIT-VI or EXHIBIT-VII as applicable

11.3 Brief of Similar Nature Work Experience-3

I Work order/ contract agreement ref number and date

Ii Name of client issued the work order and completion certificate

iii Completion certificate -ref number and date

iv Total value of work completed (Rs.)

V Stipulated date of completion

vi Actual date of completion

vii If LD is levied: Amount / period of delay for which Liquidity damage is levied by client (if any)

viii Copy of completion/experience certificate of work and Copy of Agreement/Workorder issued by Client is submitted as per format given in EXHIBIT-V or EXHIBIT-VI or EXHIBIT-VII as applicable

See PQC S/n (6) in Appendix-II of NIT for details & qualifying limits.

Information on Financial Capabilities & Turn over

12.1 Annual Financial Turnover-Total Revenue (Income) (as per CA certificate and audited P&L Account)

iii FY 2023- 24

iv FY 2022–23 (only when audited turnover for FY 2025-26 is not available)

12.2 The average of financial turnover for the last three financial years i.e. FY 2025-26, FY 2024-25 and FY 2023-24 Or FY 2022-23 (FY 2022-23 to be referred only when Audited turnover of FY 2025-26 is not available)

1. Tenderers have to fill complete details in Pre-Qualifying Performa (Bidder Information Summary) in sheet uploaded over tender portal.

2. Documents pertaining to the above details should be scanned and uploaded on e-tendering website at the time of on-line tender submission.

3. RTGS/NEFT E-payment Challans with UTR no. duly authenticated by Bank may also be scanned & uploaded along with tender submission.

4. Bidder must refer Tender Information Summary (TIS) in APPENDIX-I, PRE QUALIFICATION CRITERIA (PQC) in (APPENDIX-II) and Tender eligibility criteria as per ITB clause 3 (APPENDIX-IV) appended with NIT before filling this PQ Performa and Affidavit.

5. The PQ Performa EXHIBIT-I along with Its Annexure (Affidavit) enclosed with this Performa is mandatory and must be submitted by the Bidder.