PROVISION OF E/M WORK SERVICES EXHAUST FANS AT OFFICERS/ SNCO/ AIRMEN AND DSC MESS AC FOR HYDRAULIC LAB FLAME PROOF EXHAUST FAN AND WIRING IN FOL BLDG NO. P-950 LIGHTENING ARRESTOR STRIP TO BE CONNECTED AT CAP UPGRADATION OF CERTAIN E/M INFRASTRUCTUR

34W/MW-07/2025-26: PROVN OF E/M WORKS SERVICES (E/M PORTION)

Supply, laying, jointing and testing XLPE armoured heavy duty electric able with aluminium conductor 1100 volts grade of size 35 Sq mm 3.5 Core, complete all as specified and directed by Engineer in Charge.

Supply, laying, jointing and testing XLPE armoured heavy duty electric able with aluminium conductor 1100 volts grade of size 10 Sq mm 4 Core, complete all as specified and directed by Engineer in Charge.

M&L for excavation in trenches not exc. 1.5 m wide and not exceeding 1.5m depth for foundation of poles/laying of cables/stay/strut etc not exceeding 10 Sq m on plan and getting out in soft/loose soil, complete all as specified and directed by Engineer in Charge.

M&L for Returning, filling including spreading, levelling watering and well ramming in layers not exceeding 25 cm, complete all as specified and directed by Engineer in Charge.

M&L for Removing excavated material (soil) n.exc 50m and depositing where directed at a level not exceeding 1.5 mtr above the starting point, complete all as specified and directed by Engineer in Charge.

M&L for providing river sand as in sand cushioning to under ground cable including punning down of sand in layers, complete all as specified and directed by Engineer in Charge.

M&L for brick protection cover of UG cable by old size bricks common burnt clay building bricks sub class `B’ laid dry and flat abutting each other with width equal to length of brick and gap between adjacent brick not exceeding 10mm, complete all as specified and directed by Engineer in Charge.

S&F factory made Sheet metal enclosure of 3.15 mm thick sheet of outdoor type platform or wall mounted including three phase aluminium bus bar of rating 200 amps, complete all as specified and directed by Engineer in Charge.

S&F factory made Sheet metal enclosure of 3.15 mm thick sheet of outdoor type platform or wall mounted including three phase aluminium bus bar of rating 200 amps with MCCB 4 POLE 63 Amps, complete all as specified and directed by Engineer in Charge.

34W/MW/06/2025-26: PROVN OF EXHAUST FANS AT OFFICER'S MESS, SNCOs MESS, AIRMEN MESS AND DSC MESS (E/M PORTION)

M&L for point wiring light point/ bell point with single core PVC insulated FRLS unsheathed 1100 volt grade cable with stranded copper conductor of size 1.5 Sq mm (Nominal area) drawn through in concealed conduit, fixed on wall, ceiling with GI saddles GI screws, rawal plugs (concealed conduit wiring) with all fitt

ings including Tee, junction boxes and prvn of modular metal flush box of suitable size modular white cover plate with frame for mounting switch sockets and regulators and drawing continuous earth wire with and including PVC insulated unsheathed 1100 volts grade cable with stranded copper conductor of size 1.5 Sq mm (Nominal area) for following:-. NOTE:- After rewiring cutting chasing portion should be matched with existing finishes of walls. (a) One light/fan/bell point controlled by one switch 6 amp one way

S&F of 5 Star rated BLDC exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers, complete all as specified and directed by Engineer in Charge.

S&F of 5 Star rated BLDC exhaust fan, steel body AC single Phase. 230V of size 380mm sweep with, blades, and frame and louvers, complete all as specified and directed by Engineer in Charge.

S&F of ceiling rose 65 x 17 mm three terminals, complete all as specified and directed by Engineer in Charge.

S&F of switch piano flush type single pole, one way 6amp .

M&L for plain cement concrete 1:3:6, type C-1, (using 20mm graded stone aggregate) for road cutting / making plinth for transformer where required and fair finishing to exposed surfaces without using extra cement including necessary form work, complete all as specified and directed by Engineer in Charge.

M&L for making bore/ hole of dia. Suitable for fixing exhaust fan of size upto 380 mm sweep and making good the disturbed surface to match the existing plaster and paint, complete all as specified and directed by Engineer in Charge.

Supply and install hi wall split units indoor/ outdoor complete with cordless remote control unit and with in built Heating and Cooling arrangement and Digital Inverter twin rotary type, minimum 5 Star rating of 1.5 TR capacity with powder coated MS bracket for mounting of outdoor unit, complete all as specified and directed by Engineer in Charge.

M&L for sub main wiring with 2 run of 4 Sqmm single core PVC insulated unsheathed FRLS cable 1100 Volts grade multistranded with copper conductor drawn through and including non metallic rigid PVC conduit ISI marked 25 mm dia including conduit accessories concealed/surface type on walls roof, floors etc including one run of 4.0 Sqmm PVC copper conductor as earth continuity wire including taking down unserviceable sub main wiring including conduit from MCB SPN to AC box, complete all as specified and directed by Engineer in Charge. Note:- 2 Runs of 4 sqmm cable 1 run of 4 sqmm cable and 1 run of PVC conduit shall be measured as one unit for the of payment.

EACH POINT

S&F of metallic AC earth plug and socket with sheet metal enclosure with MCB SP 20A to 32 A complete all as directed

EACH SET

S&F of amp rating 240V, 10KA C" curve miniature circuit breaker (MCB) SPN 32Amps and current carrying capacity in the MCB DB complete with connection testing and commissioning in existing MCB DB, complete all as specified and directed by Engineer in Charge.

M&L for concealed point wiring using approved colour codeing as per IS with halogen free flame retardant (HFFR) smoke free non toxic,non corrosive with copper cable 1.5 sqmm confirming to IS : 694 nominal area single core insulated and unsheathed stranded cable 1100 volt grade and including 20 mm dia. ERW stove enamelled concealed conduit heavy duty ISI marked and unsheathed copper conductor 1.5 sqmm area as earth wire as earth continuity conductor, complete all as specified and directed by Engineer in Charge.

S&Fof flame proof switch socket and plug combined in LM^ cable termination box in LM6 , 16A, 250V, 2 P+Earth, complete all as specified and directed by Engineer in Charge.

S&F of Switch flame proof rotary type with termination box in LM6, 16A, single pole 250V, complete all as specified and directed by Engineer in Charge.

S&F of ceiling rose 240V, 3 phase/PVC/polycarbonate isolated body, complete all as specified and directed by Engineer in Charge.

S&F of flame proof exhaust fans of size 380 mm single phase AC supply complete and fixing arrangement etc complete with all accessories prewired and including connecting up with twin core twisted flexible copper cable FRLS of suitable size incl making hole for fixing of exhaust fan of suitable size and making good disturbed surfaces, complete all as specified and directed by Engineer in Charge.

S&F of flame proof Wall mounting fans of size 400 mm single phase AC supply complete and fixing arrangement etc complete with all accessories prewired and including connecting up with twin core twisted flexible copper cable FRLS of suitable size incl making hole for fixing of exhaust fan of suitable size and making good disturbed surfaces, complete all as specified and directed by Engineer in Charge. Note- Removing materials to be hand over AGE E/M store for safe custody

S&F of LED light fitting 2x 16 watt flame proof ,CMRI certified for gas /vapour group of IIa & IIIB , Zone 1 & 2 and IP 65 protection with die cast aluminium housing with heat resistant toughened glass with LED tube light fixtures driver , holders, connectors etc complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size, complete all as specified and directed by Engineer in Charge.

S&F of single phase 220/240 Volt Flameproof Distribution Board 4 way with suitable aluminium bus bar complete with all accessories, complete all as specified and directed by Engineer in Charge.

Supply, laying, jointing and testing in replacement XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 volts grade of size 6 Sq mm 2 Core with aluminium thimble of same size, complete all as specified and directed by Engineer in Charge.

Excavation in trenches not exc. 1.5 m wide and not exceeding 1.5m depth for foundation of poles/laying of cables/stay/strut etc not exceeding 10 Sq m on plan and getting out in soft/loose soil, complete all as specified and directed by Engineer in Charge.

Returning, filling including spreading, levelling watering and well ramming in layers not exceeding 25 cm as directed, complete all as specified and directed by Engineer in Charge.

Removing excavated material (soil) n.exc 50m and depositing where directed at a level not exceeding 1.5 mtr above the starting point, complete all as specified and directed by Engineer in Charge.

M&L for river sand as in sand cushioning to under ground cable including punning down of thickness 180mm sand in layers, complete all as specified and directed by Engineer in Charge.

Supply and laying reinforced precast concrete cable cover LV, Type I, flat, size 250mm x 150mm x 40mm, complete all as specified and directed by Engineer in Charge.

34W/MW-05/2025-26: PROVN OF LIGHTENNING ARRESTOR TRIPS TO BE CONNECTED AT CAP (E/M PORTION)

M&L for Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required of size 20x3 mm copper strip, complete all as specified and directed by Engineer in Charge. Note:- Porcelain cleat/ insulator deemed to be included in quoted rate

M&L for Test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos. 8mm dia 25mm long hex. head screw including necessary cutting and welding wk, complete all as specified and directed by Engineer in Charge.

S&F in replacement air termination single pointed copper rod 12 mm dia 300 mm long in replacement, complete all as specified and directed by Engineer in Charge.

M&L for Earthing complete with copper plate 60×60cm ×3.15mm thick electrode, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to 20×3 mm copper strip by means of bolts, nuts check nuts and washers of galvanized iron or steel all as shown in electrical palte No 5 of SSR Pt-I connected earthing test point/panel all as specified including PCC earth chamber using PCC(1:3:6) Type C-2 using, graded stone aggregate,50mm thick cast iron frame with CI cover, funne and wire in esh excavation and earth work, complete all as specified and directed by Engineer in Charge. Note:- Pipe/strip upto 7.5 mtrs also included in quoted rate

KILO GRAM

Supply installation, Connecting, commissioning & testing of Horizontal type submersible pump set, open well of capacity 5 HP, 415V, 3Ph, 50Hz, multi stage pump with minimum Head 82 mtr discharge 600LPM, RPM 2800, with 50 RM, 3 core, flat type copper wire of minimum 6 sqmm and DOL starter of capacity 5HP for submersible pump set with single phase preventer, dry run preventer, phase reversel indicator complete all as specified and all directed. Note - (a) This cost of foundation is included in quoted rate. (b) 10 Rm Suction & 10 Rm delivery GI pipe of required size is included in quoted rate.

CA No. : GE/BHI/MW-03 OF 2025-2026 SERIAL PAGE No._____

S&F of voltage stabilizer for Automatic operation with digital display of IP & OP voltage, copper wound single phase naturally air cooled indoor type & designed for input variation between 170V to 250V with output voltage stabilized at 230V with accuracy if +/-(2.5)% and of capacity 4 KVA, with low and high voltage cut-off protection, protect equipment from potentially danger voltage , built in thermal temperature burnout with latest IC technology and assories, complete all as specified and directed by Engineer in Charge.

S&F Fan regulator, modular type electronic step type, complete all as specified and directed by Engineer in Charge.

34W/MW-02/2025-26: PROVN OF FLAME PROOF EXHAUST FAN QTY-03 ALONGWITH FLAME PROOF WIRING IN FOL BUILDING (P-950) (E/M PORTION)

S&F Switch Modular type, 6 Amp, 240 Volts, one way, complete all as specified and directed by Engineer in Charge.

S&F Switch Modular type, 16 Amp,240 Volts, one way, complete all as specified and directed by Engineer in Charge.

34W/MW-09/2025-26: UPGRADATION OF CERTAIN E/

M INFRASTRUCTURE TO BLDG NO P-140 (E/M PORTION)

Taking down carefully copper/ aluminium point wiring (light fan socket or power) complete along with fittings such as switches, ceiling roses, Pendants regulators Tube fittings and other Kits & fittings/conduit from surface /wall . Removing the material from work site and making good the disturbed portion/ surface of wall/ floor/ ceiling etc by using cement mortar and colour/ white wash to match with the existing surface/ location, complete all as specified and directed by Engineer in Charge. Note:- Serviceable fitting/ fixtures will be reused in the work as directed by Engineer- in-Charge

Taking down un-serviceable main switch, DB’s insulators, DB for MCB etc of any type and any capacity and further disposal including making good the disturbed surface and matching the colour of wall with the existing colour wash / paint / distemper wherever required, complete all as specified and directed by Engineer in Charge.

Taking down ceiling fan of any descriptions, servicing and repairs of fans as required, fixing back, connecting and testing the fan for its satisfactory function including making good the disturbed surface and matching the colour of wall with the existing colour wash/ paint/ distemper wherever required (as per the existing ), complete all as specified and directed by Engineer in Charge.

M&L for point wiring with FRLS PVC insulated unsheathed multi-stranded copper conductor 1.5 Sq.mm (nominal area ) single core cable 1100 Volt grade drawn in and including rigid non metallic concealed PVC Conduit of suitable size (not less than 20 mm) on wall , surface of ceiling with all fittings, such as tee, bend, elbow, socket etc including pressed steel sunken boxes (Terminal boxes) with earth dolly,duly galvanised, with white shade frame & cover plate of suitable module for modular switch / or sockets including FRLS PVC insulated unsheathed stranded copper conductor 1.5 Sq.mm (nominal area ) single core cable as earth continuity conductor to common earth and connected to earth dolly, complete all as specified and directed by Engineer in Charge. (a) One light/fan point controlled by one 1-way switch

M&L for point wiring with FRLS PVC insulated unsheathed multi-stranded copper conductor 1.5 Sq.mm (nominal area ) single core cable 1100 Volt grade drawn in and including rigid non metallic concealed PVC Conduit of suitable size (not less than 20 mm) on wall , surface of ceiling with all fittings, such as tee, bend, elbow, socket etc including pressed steel sunken boxes (Terminal boxes) with earth dolly, duly galvanised, with white shade frame & cover plate of suitable module for modular switch / or sockets including FRLS PVC insulated unsheathed stranded copper conductor 1.5 Sq.mm (nominal area ) single core cable as earth continuity conductor to common earth and connected to earth dolly, complete all as specified and directed by Engineer in Charge. (a) One 3/5 pin socket outlet, 5 Amp on independent board

M&L for point wiring with FRLS PVC insulated unsheathed multi-stranded copper conductor 1.5 Sq.mm (nominal area ) single core cable 1100 Volt grade drawn in and including rigid non metallic concealed PVC Conduit of suitable size (not less than 20 mm) on wall , surface of ceiling with all fittings, such as tee, bend, elbow, socket etc including pressed steel sunken boxes (Terminal boxes) with earth dolly, duly galvanised, with white shade frame & cover plate of suitable module for modular switch / or sockets including FRLS PVC insulated unsheathed stranded copper conductor 1.5 Sq.mm (nominal area ) single core cable as earth continuity conductor to common earth and connected to earth dolly, complete all as specified and directed by Engineer in Charge. (a) One 3/5 pin socket outlet, 5 Amp on same board

M&L for point wiring with FRLS PVC insulated unsheathed multi-stranded copper conductor 2.5 Sq.mm (nominal area ) single core cable 1100 Volt grade drawn in and including rigid non metallic concealed PVC Conduit on wall , surface of ceiling with all fittings, such as tee, bend, elbow, socket etc including pressed steel sunken boxes (Terminal boxes) with earth dolly,duly galvanised, with white shade frame & cover plate of suitable module for modular switch / or sockets including FRLS PVC insulated unsheathed stranded copper conductor 2.5 Sq.mm (nominal area ) single core cable as earth continuity conductor to common earth and connected to earth dolly, complete all as specified and directed by Engineer in Charge.

Dismantling/ Taking down existing unserviceable sub main wiring from batten / conduit of any size all as directed. Removing the material from work site and making good the disturbed portion/ surface of wall/ floor/ ceiling etc by using cement mortar and colour/ white wash to match with the existing surface / location, complete all as specified and directed by Engineer in Charge.

M&L for sub main surface wiring with PVC insulated unsheathed copper conductor cable of size 6 Sqmm single core through concealed rigid non-metallic PVC conduit of suitable size (Not less than 25 mm dia) in wall and surface of ceiling including 6 Sqmm PVC insulated unsheathed copper conductor cable for continuous earthing form main earth dolly including making good the disturbed potion of wall, complete all as specified and directed by Engineer in Charge. Note :- Two run of 6 Sqmm copper cable one run of 6 Sqmm copper cable and PVC conduit will be measured as a single length.

S&F of Switch Modular type, 6 Amp, 240 Volts , one way, complete all as specified and directed by Engineer in Charge.

S&F of Switch Modular type, 16 Amp,240 Volts , one way, complete all as specified and directed by Engineer in Charge.

S&F of Socket outlet, Modular type, 6 Amp, complete all as specified and directed by Engineer in Charge.

S&F of Socket outlet, Modular type, 6&16 Amp, complete all as specified and directed by Engineer in Charge.

S&F of Fan regulator, modular type electronic step type, complete all as specified and directed by Engineer in Charge.

S&F of ceiling rose surface Bakelite two to three terminal 65x50 mm, complete all as specified and directed by Engineer in Charge.

S&F of Tube light fittings LED type 1x20 Watt 4 ft long incl LED tube rod and incl 3 core flexible wire 0.75 Sqmm copper cable, complete all as specified and directed by Engineer in Charge.

S&F of MCB DB SPN 8 Way with acrylic double door, complete all as specified and directed by Engineer in Charge.

S&F of including flushing in wall MCB distribution board vertical TPN 4 way 415 Volts AC double door type sheet steel phosphatised powder painted with bus bar neutral earth bar including provision of MCB TPN, FP 100 Amp conforming to IP 43 as incomer, complete all as specified and directed by Engineer in Charge.

S&F of MCCB 4 pole 100 Amp 415 volt with breaking capacity of 16 KA, complete all as specified and directed by Engineer in Charge.

S&F of MCB SPN 240V 40 Amps C series 10 KA, complete all as specified and directed by Engineer in Charge.

S&F Socket outlet, Modular type, 6 Amp, complete all as specified and directed by Engineer in Charge.

S&F of MCB SP 240V 6 to 32 Amps C series 10 KA, complete all as specified and directed by Engineer in Charge.

M&L for earthing complete with galvanised steel earth plate electrode 600x600x6mm thick buried directly in ground (earth pit not less than 2 mtr deep below ground level with top edgw of the plate not less than 1.4 mtr below normal ground level , connected earth wire 4 sqmm by means of bolts nuts check nuts and washers of galvanised iron or steel all as shown in electrical plate No 5 connected to earthing test point all as specified or indicated including PCC pit in PCC(1:3:6) type C-1 cast iron frame 50mm thick pre cast RCC(1: 1 1/2:3) nominal mix cover slab reinforced with 8

mm dia mild steel deformed bar 15cc and suitable handle of 10 mm Dia round bar including necesary excavation earth work in soft/loose soil and disposal of spoil to a distance n.exc 50m and funnel with watering pipe wire mesh copper lugs etc GI protection pipe of size 15 mm bore including testing, complete all as specified and directed by Engineer in Charge.

Taking down cement or cement lime plaster of any description and any thickness on brick ,concrete or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed by Engineer in Charge.

M&L for complete removal of existing treatment from walls, pillars, cornices upto plaster surface by electric sand paper grinder, washing, rubbing down and stopping of existing treatment including cleaning of mortar drops, smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots etc and preparation of plastered surfaces finally rubbed and smooth with sand paper and applying two coat of premium quality exterior emulsion paint over priming coat of exterior primer, complete all as specified and directed by Engineer in Charge.

M&L for preparation new wall surface for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces, complete all as specified and directed by Engineer in Charge.

M&L for preparation of new plastered surfaces of Ceiling and applying three coats of white wash on Ceiling, complete all as specified and directed by Engineer in Charge.

M&L for rendering 15 mm thick cement plaster in CM (1:4) on brick or concrete surfaces and finishing the surface even and fair etc, complete all as specified and directed by Engineer in Charge.

M&L for Complete removal of existing treatment and preparation of old plastered /unplastered surfaces of Ceiling and applying three coats of white wash on Ceiling, complete all as specified and directed by Engineer in Charge.

M&L for Complete removal of existing treatment and preparation of old plastered surfaces of walls and applying two coats of Oil bound distemper acrylic, white or tinted over a priming coat of same make on wall surfaces, complete all as specified and directed by Engineer in Charge.

M&L for rendering 5 mm thick cement plaster in CM(1:3) on concrete surfaces in ceiling, complete all as specified and directed by Engineer in Charge.

M&L for rendering 15 mm thick cement plaster in CM (1:6) on brick or concrete surfaces and finishing the surface even and fair etc, complete all as specified and directed by Engineer in Charge.

S&F Socket outlet, Modular type, 6816 Amp, complete all as specified and directed by Engineer in Charge.

M&L for vitrified tiles 9 to 10 mm thick light shade (square/ rectangular) polished, area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM (1:6) for laying floor finishes, complete all as specified and directed by Engineer in Charge.

M&L for vitrified tiles 9 to 10 mm thick light shade (square/ rectangular) on vertical surfaces as in skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick cement plaster in CM 1:4 to receive vertical tiles, complete all as specified and directed by Engineer in Charge.

M&L for Preparation of new plastered surfaces of walls and applying two coats of oil bound distemper acrylic, white or tinted over a coat of primer, complete all as specified and directed by Engineer in Charge.

S&F ceiling rose surface Bakelite two to three terminal 65x50 mm+B24, complete all as specified and directed by Engineer in Charge.

M&L for applying 1.5 avg mm thick wall care putty (JK/Birla/berger) on walls, including making surface even and smooth using sand paper before applying Priming coat, complete all as specified and directed by Engineer in Charge.

Dismantling floor , hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed by Engineer in Charge.

Demolition of cement concrete in ground floors and paving n exc 15 cm thickness (below or above ground level) and removal of debris from MD land, complete all as specified and directed by Engineer in Charge.

M&L for Coloured Chequered cement concrete tiles 30cm x 30 cm x 25 mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigment, complete all as specified and directed by Engineer in Charge.

M&L for machine cut kota stone slab flooring 18-20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab over 15mm thick screed bed of CM1:4 including rubbing and polishing, complete all as specified and directed by Engineer in Charge.

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar or cement lime mortar, complete all as specified and directed by Engineer in Charge.

M&L for brick work with subclass B bricks, straight or curved on plan exc 6 m mean radius , built in cement mortar (1:6), complete all as specified and directed by Engineer in Charge.

M&L for machine cut kota stone slab 14-16 mm thick in riser of steps ,skirting, dado and pillar laid over cement screed and cement slurry including 10mm thick cement plaster 1:3 CM to receive kota stone and jointed rubbing and polishing, complete all as specified and directed by Engineer in Charge.

M&L for Granite stone (of any Type) work table rubbed and polished 18 mm thick machine cut,in steps, jams,pillars,window cills,cooking platforms and like laid and bedded over 15 mm thick cement mortar in CM(1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, including making 01 x hole for gas pipe in each cooking platform, complete all as specified and directed by Engineer in Charge.

M&L for preparation of previously treated/untreated surface of chequered or interlocking tiles and applying two coats of indigo washable floor paint over a coat of priming paint with 30-40% water, complete all as specified and directed by Engineer in Charge.

Taking down Aluminium chowkats & shutters without taking off shutters from the frame, size of opening exc. 1.0 sqm but not exc 4 Sqm each, complete all as specified and directed by Engineer in Charge.

Taking down Aluminium chowkats & shutters without taking off shutters from the frame, size of opening exc. 4 sqm but not exc 8 Sqm each, complete all as specified and directed by Engineer in Charge.

S&F for Powder coated aluminium frame for doors, windows, ventilators, partitions with one or more rebates including joining cleat for fixing etc, complete all as specified and directed by Engineer in Charge.

S&F for Powder coated aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, mortise locks anodised aluminium snap beading screws etc, complete all as specified and directed by Engineer in Charge.

S&F for Powder coated aluminium side hung /sliding type window and ventilator shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, locks, glazing clips, rubber packing, anodised aluminium snap beading, screws etc, complete all as specified and directed by Engineer in Charge.

S&F for Powder coated aluminium decorative grill of size of mesh 50mmX50mm fixed with doors, window for safety of glass etc, complete all as specified and directed by Engineer in Charge.

S&F of Aluminium (extruded section) Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg, complete all as specified and directed by Engineer in Charge.

Supply only sheet glass 6.3 mm thick ordinary quality in square/rectangular exceeding .5 Sqm in each pane, complete all as specified and directed by Engineer in Charge.

Supply installation, Connecting, commissioning & testing Horizontal type submersible pump set, three phase open well of capacity 20 HP, 415V, 3Ph, 50Hz, multi stage pump with minimum Head 30 mtr discharge 2910 LPM, RPM 2900, with 100 RM, 3 core, flat type copper wire of

S&F of 12 mm Pre laminated exterior grade both side laminated board, complete all as specified and directed by Engineer in Charge.

Taking down rolling shutter of any description (With all components) and in any size and removing from site area upto 15.00 Sqm each, complete all as specified and directed by Engineer in Charge.

Providing & fixing tiled false ceiling of Designer tile Ivory painted (High Pressure Steam cured) of 4mm thickness (as per IS : 14862) of size 595x595mm and any one of the design (Cascade or electra) in true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel section (Galvanised @120 grms, both side inclusive and black painted groove on all T webs) consisting of main T runner with suitably spaced joints to get required length and 15x32mm made from 0.30mm thick sheet spaced at 1200mm c/c and croos 'T' of size 15x32mm made of 0.30mm sheet 1200mm long spaced between main "T" at 600 mm c/c to form a grid of 1200x600mm and secondary cross "T" of length 600mm and size 15x32 mm made of 0.30mm thick sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x22x0.40mm and laying false ceiling tiles in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI soffit cleats fixed to existing RCC lintel with dash fasteners, GI adjustable rods of 3mm dia with galvanised Butterfly level clips, spaced at 1200mm c/c along main 'T', bottom exposed width of 15mm of all 'T'' sections of 3mm dia GI wire shall be pre-painted with polyester paint and black painted groove at center of size 4mm depth and 4.5mm width, all complete at all heights, complete all as specified and directed by Engineer in Charge.

Surface dressing n exc 15 cm deep in soft/loose soil, complete all as specified and directed by Engineer in Charge.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in any type of soil, complete all as specified and directed by Engineer in Charge.

Removing surplus excavated material (soil) to distance exc. 250 m but not exc 500 m and depositing where directed at a level not exc. 1.50 m above the starting point, complete all as specified and directed by Engineer in Charge.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft and loose soil, complete all as specified and directed by Engineer in Charge.

M&L for providing plai

S&F Tube light fittings LED type 1x20 Watt 4 ft long incl LED tube rod and incl 3 core flexible wire 0.75 Sqmm copper cable, complete all as specified and directed by Engineer in Charge.

n cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundation and mass concrete, complete all as specified and directed by Engineer in Charge.

M&L for hardcore of broken bricks of gauge n exc. 63 mm , deposited , spread and levelled and compacted in layers n exc. 15 cm thick , watered and rammed to a true surface, complete all as specified and directed by Engineer in Charge.

M&L for 125 mm thick cement concrete type C-2, 1:3:6 (40 mm graded stone aggregate) as in sub base, complete all as specified and directed by Engineer in Charge.

M&L for rough cast plaster on brick wall consisting under coat of cement and sand mortar (1:4) not less than 10mm thick and while it is still in plastic state the rough cast mixture consisting of crushed stone or fine gravel mixed with coarse sand and cement in the ratio 1:1:1 shall be applied and finish even, complete all as specified and directed by Engineer in Charge.

M&L for preparation of new plastered surfaces of walls and applying three coats of white wash, complete all as specified and directed by Engineer in Charge.

M&L for Sand filling under floors or watering and consolidation, complete all as specified and directed by Engineer in Charge.

34W/MW-03/2025-26: ADDN/ALTN TO BLDG NO P-346 (E/M PORTION)

M&L for brick work with sub class 'B' bricks, straight or curved on plan exc 6m mean radius built in CM 1:6, complete all as specified and directed by Engineer in Charge.

M&L rendering 15mm thick on cement mortar 1:4 finished fair faces of brick/concrete surfaces even and fair without using extra cement, complete all as specified and directed by Engineer in Charge.

M&L for rendering 15 mm thick in CM 1 : 6 on other than fair faces of brick work or concrete surfaces etc finished even and fair without using extra, complete all as specified and directed by Engineer in Charge.

M&L for preparation of new plastered surfaces and applying two coats of cement base paint of approved shade on walls, complete all as specified and directed by Engineer in Charge.

M&L for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing in Fe 410-W (Gde E- 250) quality A, complete all as specified and directed by Engineer in Charge.

M&L for Mild steel, plain, black sheet 1.25 mm thick in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc, complete all as specified and directed by Engineer in Charge.

S&F of Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tack or galvanised wire staple, complete all as specified and directed by Engineer in Charge.

34W/MR-03/2025-26: ADDN/ALTN TO BLDG NO P-346 (B/R PORTION)

M&L for Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates in Fe 410 -W (Gde E- 250) quality A, complete all as specified and directed by Engineer in Charge.

M&L for preparation of new steel surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer exposed to view surfaces complete all as specified and as directed complete, complete all as specified and directed by Engineer in Charge.

S&F of Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed by Engineer in Charge.

34W/MW-03/2025-26: PROVN AND INTALLATION OF DE-WATERING PUMP (E/M PORTION)

S&F of Gun-metal, globe or gate valves 25 mm dia with iron wheel head, screwed both ends for iron pipe, complete all as specified and directed by Engineer in Charge.

S&F of Gun-metal, globe or gate valves 20 mm dia with iron wheel head, screwed both ends for iron pipe, complete all as specified and directed by Engineer in Charge.

Supply and laying 20 mm bores of tubes medium grade' galvanised with all fittings, complete all as specified and directed by Engineer in Charge.

M&L for 25 mm thick cement concrete Type B1, 1:2:4 (using 20 mm graded stone aggregate), as in sub base of floor, complete all as specified and directed by Engineer in Charge.

Supply and laying 25 mm bores of tubes medium grade' galvanised with all fittings, complete all as specified and directed by Engineer in Charge.

M&L for PVC Foot valve of size 25 mm, dia nuts,bolts,rubber gaskets etc, complete all as specified and directed by Engineer in Charge.

M&L for Gun metal NRV of size 25 mm, dia nuts,bolts,rubber gaskets etc, complete all as specified and directed by Engineer in Charge.

Supply and Laying , PVC insulated and FR PVC Round Sheathed, Copper Conductor conforming to IS: 694 PVC insulated 1100 volt grade heavy duty electric cables with copper conductor , cross sectional area 2.5 sqmm 3 core, complete all as specified and directed by Engineer in Charge.

M&L for 75 mm thick Cement concrete type D-2, 1:4:8 (using 40mm graded stone aggregate) as in sub base to paving, complete all as specified and directed by Engineer in Charge.

S&F Single pole and neutral (SPN) 4 way MCB distribution box double door powder coated sheet metal encloser 240 volts including 200 Amps rated bus bar, complete all as specified and directed by Engineer in Charge.

S&F of MCB single pole (SP) B curve 240 Volt 6 to 32 Amp, rupturing capacity 10 KA, complete all as specified and directed by Engineer in Charge.

M&L Damp proof course 40 mm thick cement concrete 1:2:4, type B-0 (using 12mm graded stone aggregate), to horizontal or vertical surfaces including necessary formwork & Polythene film, 50 micron thick, laid on a coat of bitumen primer, @ 0.30 to 0.50 kg per sq. m, complete all as specified and directed by Engineer in Charge.

S&F of MCB single pole & Neutral (SPN) B curve 240 Volt 40 Amp, rupturing capacity 10 KA, complete all as specified and directed by Engineer in Charge.

S&F single phase DOL starter with incorporating single phase pump starter -economical model ind SS enclosure incorporating 2 pole definite purpose contactor , single pole MCB , Ammeter, ON/OFF push buttong , motor ON indicator with dry run protection Make C&S,/Havelss, Having capacity 1.5 KW Capacitor rating 50 MFD , MCB Range 32 Amp , MCB C Curve, complete all as specified and directed by Engineer in Charge.

S&F new Horizantal plastic 2.5 feet rectangular loft tank having capacity 250 ltr moulded polythene water storage tank in three layer in white colour and fix in position, complete all as specified and directed by Engineer in Charge. Note : Contractor will be supply the item after visit the site.

M&L for Making holes in 100 mm dia bore in RCC wall/roof sump using suitable machinery or equipment and close again using Cement mortar 1:3:4 make or repair of pot holes in existing building wall/sump for passing of pipe / cables / pipe / cable tray, the disturbed surface of wall to passing of pipe cable/removing of existing duct shall be make good by applying cement plaster 1:4, and if required to fill with brick work 1:3:6 and applying putty and colour wash etc matching with the existing surfaces, complete all as specified and directed by Engineer in Charge.

M&L for 75 mm thick plain cement concrete 1:3:6 type C-1 (using 20mm graded stone aggregate) as in plinth protection finishing cement concrete surface even and fair without using extra cement, including making construction joint at a interval not exceeding 2.00 m and at each corner and filled with sealing compound with grade A(normal) in 25/30, complete all as specified and directed by Engineer in Charge.

M&L for earthing complete with galvanized steel earth plate electrode 600x600x6.3 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below normal ground level,the earth electrode surrounded by adequate quantity of charcoal dust and salt to a packed thickness of 15cm on all side and including connected toand including galvanized earth lead wire 4.0 mm dia upto 7.5 mtrs long by means of nuts and bolts, check nuts and washers of GI and connected to earhing test point and earth dolly all as shown in electrical plate No 3 of MES SSR part I and testing on completion including necessary excavation and earth work in any type of soil,PCC(1:3:6)type C1 chamber,pre-cast RCC slab 50mm thic in cement concrete (1:2:4),type B1,reinforced with welded steel wire fabric or XPM,(weight not less than 4 Kg per Sqm) with cast iron frame, funnel with watering pipe 20mm dia medium grade, wire mesh and lugs, GI protection pipe,15mm deadlight grade,7.5 mtr long for protection of earth lead upto test point etc all as specified and as directed.

Supply, installation , connecting commissioning and testing of self priming pump, Bronze impeller 1.5 HP Single Phase, 220 volts with head 33 mtr and discharge 1950 LPH, complete all as specified and directed by Engineer in Charge. Note:- The cost shall be included making foundation size .5mtrx.5mtr x10 mm thick pith RCC structure.

M&L sub main wiring with 2 runs of copper conductor PVC FRLS insulated unsheathed cable 1100 volt grade 4 sqmm drawn through PVC conduit medium grade ISI marked 25mm dia as per IS specification fixed concealed in wall/ceiling including conduit and conduit accessories and incl provn of PVC insulated 4 Sqmm multistranded copper conductor as earth continuity conductor connected to earth dolly all as specified including dismantling old and making good to the disturbed surface by plastering and two coat of distemper all as directed at site, complete all as specified and directed by Engineer in Charge. Note: Two runs of 4 sqmm cable alongwith one run of 4 Sqmm PVC insulated unsheathed copper conductor as earth wire, conduit and conduit accessories will be measured as one length

NOTE: BOQ has bifurcated job wise, if bidder quoted different rate for same item at different jobs then lowest quoted rate shall be considered for acceptance for all jobs.