SPECIAL REPAIR TO 04XTOILET BLOCK OF BLDG NO T-42 AND T-43 (OR LIVING LINE) ALONGWITH ROOF TREATMENT OF EME BN AND CERTAIN SANCTIONED WORKS UNDER AGE B/R -II AND AGE E/M AT MIL STN JAMMU

Amount

Dismantling of timber scantlings 40 Sqcm and over in section, framed work,in any position complete all as specified and directed

Dismantling of unframed timber scantlings in fillets, rails, posts, rafters, purlins etc under 40 Sqcm in section, in any position complete all as specified and directed

S&F rolled mild steel in roof trusses (framed), trussed, purlins, crane gantries rails and fastening and heavy bracket framing (beam, tee, angle channel or flat sections) including distance pieces, cleats etc confirmimg to Fe 290 (Gde E -165) complete all as specified and directed .

S&F rolled mild steel in framed brackets of angles or tees with web flanges,cut to shape,drilled and countersunk for screw including bending and welding conforming to Fe-290 Gde E-165 quality , complete all as specified and directed

S&F rolled mild steel in plates (plain or chequered) channels,square cut or notched (ordinary or counter sunk) forming holes ,without any attachment conforming to Fe-290 Gde E-165 quality , complete all as specified and directed

Dismantiling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed

S&F Pre painted galvalume aluminium zinc coating (AZ-150 micron) GI based corrugated steel sheet 0.5 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall fixed with self tapping screws complete all as specified and directed .

S&F Pre painted galvalume aluminium zinc coating (AZ-150 micron) GI based plain steel sheet 0.5 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall fixed with self tapping screws complete all as specified and directed.

Dismantling Wall and ceiling boards (fibre,pulp, insulation) or insulation boards/slabs/blankets, any thickness, including cover fillets etc complete all as specified & directed.

Providing and fixing false ceiling at all heights with GRG (Glass fibre Reinforced Gypsum) false ceiling tiles of Size 595x595x mm of approved texture with fully perforated 12 mm thick micro tegular edges, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRCO.50 to 0.75 as per BS 476 (Part -4)-1970 and light reflectance of 85% (Minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33 mm thick (Galvanized @120 grams per Sqm incl both sides) comprising of Main T runners of Size 15x32 mm of length 3000mm, cross T of Size 15x32 mm of length 600 mm to form grid module of size 600x600 mm, suspended from ceiling using galvanized mild steel items (Galvanizing @ 80 grams per Sqm) i.e., 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod up to 1000 mtr length and L-shape level adjuster of size 85x25x2 mm Galvanised iron perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall/partition with the help of plastic rawl plugs at 450 mm centre to centre and 40 mm long dry wood screws. The work shall be carried outvas per specifications, drawing and as per directions of Engr-in-Charge.

S&F Solid PVC wall lining consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on and including PVC frame/fillets of size 5mm thick and width 35mm as per specifications and drawings all as specified and directed . Note:- Quoted rate of the item deemed to be included for taking down and refixing (as per existing) minor electric fittings and fixtures (if any) on the surface of wall

M&L for taking down cement plaster on brick or stone walls/ceiling etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed..

M&L for rendering 15 mm thick in cement mortar 1:4 on brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed and directed .

M&L for rendering 15 mm thick in cement mortar 1:6 on brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed and directed .

M&L for rendering 05 mm thick in cement mortar 1:3 on ceiling, surface finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of new plastered or unplastered surfaces of ceiling and applying three coats of white washing complete all as specified and directed .

M&L for preparation of newly plastered surfaces of walls & applying two coats of weather proof paint over two coats of wall care putty of 1 mm thick each and one coat of primer complete all as specified and directed .

M&L for preparation of old decorated surfaces of walls & applying two coats of weather proof paint over two coats of wall care putty of 1 mm thick each and one coat of primer complete all as specified and directed .

M&L for preparation of newly plastered surfaces of walls & applying two coats of oil bound distemper over two coats of wall care putty of 1 mm thick each and one coat of primer complete all as specified and directed .

M&L for writing letters or figures (Block, Roman. Italic or Indian) n.exc 30cm high including obliterating old writing of any description n.exc 0.2 Sqm with paint to match existing work complete all as specified & directed

M&L for preparation of old decorated concrete/ plastered surfaces of walls, Pillars, cornices etc by booming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots & rubbing with sand paper and applying two coats of oil bound distemper over two coats of wall care putty of 1 mm thick each on uneven surface as and where required.complete all as specified and directed

M&L for repairing of concrete surfaces such as balcony, chajjas, upward or downward facia ,column, pillar, ceiling and similar items of width n. exc 200 mm with plain cement concrete 1:2:4 type B-0 (using 12.5mm thick crushed stone aggregates) or with 15mm thick rendering in cement mortar 1:3 without using extra cement,surface finished even and fair (as per site requirement) and preparation of newly plastered surfaces & applying two coats of weather proof exterior emulsion paint over a coat of primer as per existing shade of surfaces complete all as specified and directed. (Note:- Quoted rated shall be deemed to include:- (i) formwork and scaffolding required & taking down or dismantling as per site requirement (ii) The work is to be executed upto 4th storey building

Demolition of floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed .

Dismantling stone slabs of any description or thickness in floors, apron etc laid bedded and pointed in any mortar complete all as specified and directed .

M&L for glazed ceramic coloured digital tiles,300x450x7 mm thick, as in vertical surfaces, set and jointed in neat cement slurry and pointed in white or colored cement to match the colour of tile over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed.

M&L for 7 to 8 mm thick non skid coloured digital ceramic joint less tiles (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm , in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 15 mm thick screed bed in cement mortar 1:4 complete all as specified and directed .

M&L for 8 to 9 mm thick vitrified ceramic coloured or printed (Double Charged) edge cut, joint free tiles (square/ rectangular) polished area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm ,in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 15 mm thick screed bed in cement mortar 1:4 complete all as specified and directed .

M&L for 8 to 9 mm thick vitrified ceramic coloured or printed (Double Charged) edge cut, joint free tiles (square/ rectangular) polished area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm ,in vertical surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed .

M&L for black granite work 16 to 18 mm thick (table rubbed and polished) in steps, jambs, pillars, window cills,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match shade of granite complete all as specified and directed .

S&F Machine cut kota stone slab in flooring 18-20mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing,cutting and mirror polishing over and including 15 mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed.

M&L for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations all as complete all as specified and directed .

M&L for 50mm thick PCC 1:3:6 , type C-1 (using 20 mm graded crushed stone aggregate) as in plinth protection, laid in slope in 1:30 in alternative bays not exceeding 3 mtr in length. surfaces finished even and fair including raking out joints between panel to panel and panel to wall and plugging the same with bitumen mastic using bitumen and sand mixture in 1:3 complete all as specified and directed .

Taking down chowkats or frames not exceeding 1.5 Sqm each with shutter (without taking off shutter from the frame) and removing from site complete all as specified and directed .

Taking down chowkhats or frames (without taking off shutters from the frame) exceeding 1.5 sqm but not exceeding 4 sqm each and removing from site complete all as specified and directed .

Taking down chowkhats or frames (without taking off shutters from the frame) exceeding 1.5 sqm but not exceeding 4 sqm each and refixing in the same opening after minor repair to make it functional complete all as specified and directed .

S&F in repair aluminum powder coated (coating not less than 50 micron) window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, necessary glazing and locking arrangements and provision of space for exhaust fan (if required ) with powder coating of any colour (thickness of powder coating not less than 50micron) including finishing disturbed surfaces with 10mm thick cement mortar 1:3 and applying two coats OBD over1 to 2 mm thick putty complete all as specified and directed .

S&F aluminum powder coated (coating not less than 50 micron) window and ventilator shutters, side hung type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, necessary glazing and locking arrangements anodised aluminium fittings such as peg stays 150mm long (1 No.). hinges type B-21 100mm long (2 Nos.) suitable handle (1 No.) complete all as specified and directed

S&F aluminium powder coated (coating not less than 50 micron) door frame and door shutter, door frame of hollow section 101mm x 44.0mm x thickness not less than 1.20 mm & hollow section of stiles of glazed shutter 85mm x 44.45mm x thickness not less than 1.20mm having grooves for aluminium beading and top rail of hollow section 83.5mm x 44.45mm x thickness not less than 1.20mm, lock rail of hollow section 83.5mm x 44.45mm x thickness not less than 1.50mm and bottom rail of hollow section 83.5mm x 44.45mmx thickness not less than 1.20mm ,one derived handle 200mm long,100mm long butt hinges - 4 Nos , aluminium floor type hydraullic door closer, aluminium mortice lock 65mm 4 levers of Godrej pattern and rubber packing, aluminium beading complete all as specified and directed.

S&F aluminum anodized powder coated (coating not less than 50 micron) frame of size 101.60 x 44.45mm made out of 1.20mm thick aluminum section including cleat rubber packing aluminium beading (if required for partition) and aluminium hardware ,fixed to floor/wall with plugs and screws complete all as specified and directed

M&L for 5.5 mm thick, tinted sheet glass ordinary quality and glazing with oil putty or with wooden beads (supplied alongwith shutters) in squares exc 0.5 Sqm in each pane complete all as specified and directed.

S&F pressed steel frames of size 105mm x 60mm ,made out of 1.25mm thick MS sheet for doors, single rebated including mild steel hinges, medium weight of size100 mm and 25mm x 3mm flat iron as holdfast, tie bar including necessary fixing lugs, hold fast, lock strike plate and fixing arrangement etc including PCC 1:3:6 type C1 as in back fill to chowkats complete as specified and directed.

S&F pressed steel frames of size 125mm x 60mm ,made out of 1.25mm thick MS sheet for doors, single rebated including mild steel hinges, medium weight of size100 mm and 25mm x 3mm flat iron as holdfast, tie bar including necessary fixing lugs, hold fast, lock strike plate and fixing arrangement etc including PCC 1:3:6 type C1 as in back fill to chowkats complete as specified and directed.

S&F factory made 35 mm thick 2nd class hard wood, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc divided into squares with plain, chamfered or rounded, mitred and rebated sash bars ,any numbers sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); fitted to chowkats complete all as specified and directed .

M&L for factory made box type steel windows double shutter , outer frame made out of ERW TUBE 'P' section (60x35x25mm) and shutters of ERW TUBE 'P' section (50x35x20mm) openable shutters side hung including pistol hinges with two Nos of MS Tower bolts 150mm size on each shutter, steel handle and stopper of 'Z' section as specified complete with sash bars devetailed or welded ready for glass fixing and wire gauzed fixing with suitable fittings/openning for cooler/AC where required .Steel windows will be double shutter (external glazed and internal wire gauzed) complete all as specifed in Drg No CEPZ/C-TD/27/13 of sheet No1/4 to 4/4 complete all as specified and directed . NOTE: The quoted rate shall be deemed to include:- (i) Provn of one shop coat of zinc chromate primer on all exposed steel surfaces and one coat of coal tar on the ends of steel frame in contact with brick/conc surface (ii) 04 Nos MS steel lugs of MS flat 20x5mm & 20cm long over all welded to frames (iii) PCC block for embedding lugs.(iv) Provn of 10 mm square bar as guard bar, spacing 100 mm c/c all as per drg and including 4 mm thick flat iron for fixing of guard bars all around

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or stainless steel wire staples complete all as specified and directed .

M&L for 3 mm thick, plain sheet glass, ordinary quality and glazing with oil putty or any type of beads in squares n.exc 0.5 sqm each pane complete all as specified and directed .

M&L for 35mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed .

M&L for preparation of new or previously untreated wood or wooden based surfaces of any description not other wise described over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F factory made solid PVC door frame of size 50x47mm, made out of 5mm thick plain coloured PVC sheet reinforced with MS square tube complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppplying and fixing in the frame at site as per specification complete all as specified and directed .

S&F factory made pre-lam glossy finish solid WPC PVC ply 18mm (+0.7mm) thick (celuka) glossy finish, Density of ply 600Kg/cbm manufacured by an ISO 900-2008 certified company. One side glossy finish prelam and other side plain for kitchen cabinet shutter/wardrobe shutter complete as per manufacturer's specifications complete all as specified and directed .

S&F factory made solid 18mm(+0.7mm) thick celuka PVC ply of density 600Kg/cbm manufacured by an ISO 900-2008 certified company. Plain 18mm thick Celuka PVC Ply for Shelf/Partitions/Drawer and also manufacturer's test report and test certificate is mandatory with each and every supply of the material complete as per manufacturer's specifications and drawing including fixing with 75 mm long fastener as per requirement complete all as specified and as directed .

S&F factory made solid 5mm (+0.7mm) thick celuka PVC ply of density 600Kg/cbm manufacured by an ISO 900-2008 certified company. Plain 18mm thick Celuka PVC Ply for Shelf/Partitions/Drawer and also manufacturer's test report and test certificate is mandatory with each and every supply of the material complete as per manufacturer's specifications and drawing incl fixing with 75 mm long fastener as per requirement complete all as specified and as directed .

S&F stainless steel designer handle ( heavy type)100 mm size, fixed in drawers or shutters of cupboards complete all as specified and directed.

S&F steel fasteners of size 75 mm long, drilled and fixed to walls complete all as specified and directed.

S&F steel support of 50mm dia and 75mm length fixed with bolts at bottom of cupboard box complete all as specified and directed.

S&F in repair 30mm width continous (piano) hinges, mild steel, bright finish or electro galvanised fixed with screws complete all as specified and directed

S&F 100mm stainless steel butt hinges fixed with stainless steel screws complete all as specified and directed.

S&F aluminium anodised barrel tower bolts,150 mm long of extruded section, fixed to doors with screws complete all as specified and directed .

S&F Aluminium anodised, fabricated type, handle 100 mm size complete all as specified and directed.

S&F aluminium alloy, anodised, sliding door bolt of length 250mm with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolt and sliding bolts of extuded sections or cast aluminium alloy and fixed complete all as specified and directed .

S&F aluminium hanging floor door stopper,twin rubber of size 100mm , anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws complete all as specified and directed .

S&F mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate fixed with welding complete all as specified and directed

M&L for 50 mm magnetic catcher with brass body and striking plate including letting in as fixed complete all as specified and directed.

S&F in repair mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate fixed with welding complete all as specified and directed

M&L for framed work such as grills , gratings etc with ends of bars shouldered and /or riveted or forged into spikes , framed guard bars, barred iron doors, ladders, framed balusters: walk ways , railings frame work of water tanks and similar work confirming to Fe290, Gde E-165 complete all as specified and directed

M&L for preparation of new or previously untreated steel surface of any description over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed

M&L for preparation of old painted steel surface of any description over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint complete all as specified and directed

S&F sink, made of 1mm thick stainless steel, overall size of sink 610mm x 460mm with bowl size 560mm x 410mm x 200mm with plugs, washers, waste pipe, union, waste coupling and cantilever brackets embedded in cement and sand mortar in wall complete all as specified and directed

S&F in repair central hole basin mixer without popup waste system with 450mm long braided hoses, screwed down for 15mm bore iron pipe complete all as specified and directed.

S&F Vitreous china urinal of size 375x390x590mm, white including providing and fixing plugs, bedding urinal against wall in CM 1:2 securing urinal to plugs with & including 60 mm long brass screws, pointing around urinal back in cement, flush pipe, grating and union for discharge pipe and chromium plated spreader including Brass chromium plated waste coupling 32mm bore, Waste pipe PVC 32mm bore complete all as specified and directed.

S&F in repair cast copper alloy, chromium plated, wall mixer non telephonic shower arrangement with connecting legs & wall flanges with provision of overhaead shower complete all as specified and directed.

S&F in repair bib tap long body with flange,cast copper alloy, chromium plated,fancy type,screwed down, screwed for 15mm bore pipe & fixed complete all as specified and directed .

S&F in repair angle cock with flange, cast copper alloy, chorminium plated, fancy type, screwed both ends for 15mm bore of iron pipe or for union and fixed complete all as specified and directed .

S&F in repair health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connectios and fixed in position complete all as specified and directed.

S&F in repair brass chromium plated tubular towel rail 20mm dia, D type, 600mm long between flanges fixed with CP brass screws including wooden/plastic beads complete all as specified and directed

S&F Chromium plated soap dish of size 160x160x90mm, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed.

S&F in repair corner glass shelf of size 30cm with Chromium plated bracket guard and railing fixed with and including screws and wooden/plastic cleats complete all as specified and directed

S&F in repair PVC connection 15mm dia 60 cm long with brass nut and washer both side complete all as specified and directed.

S&F in repairs brass chromium plated overhead shower 125mm size with or without swivel joints including fixing to steel pipe of 15mm bore complete all as specified and directed .

S&F in repair vitreous china counter wash basins, size 560x470x190mm, oval shape,white to be fixed on counter/ RCC slab including CP waste coupling & PVC waste pipe complete all as specified & directed.

S&F in repair vitreous china wash hand basin, white, flat back of size 630x450mm including cutting for and pinning in ends of brackets or erecting stand including cast iron brackets, brass chromium plated waste coupling 32mm bore, waste pipe PVC 32mm bore complete all as specified and directed

S&F in repair PVC low level flushing cistern, white, 10 litre capacity, valveless syphonic action type with float, handle including PVC 32mm 'L' bend and brackets etc complete all as specified and directed .

S&F in repair Vitreous china ware pedestal type water closet white, with 'P' or 'S' trap including self closing seat cover, closed pattern with flat bottom complete all as specified and directed .

S&F in repair vitreous China squatting pan, Orissa pattern, size 580 x 440mm, white, with integral foot rest, 'L' bend, including provision of cement concrete bedding and connection to trap and to flushing pipe, anti syphonage pipe etc and making good to floors complete all as specified and directed .

Dismantling water tanks of capacity 500 ltrs to 1000 ltrs and removing to store complete all as specified and directed .

S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top)1000 Ltr capacity,trippled layered, hoisted and fixed in position including PTMT Ball valves high pressure with epoxy coated aluminium rod & high density plastic ball , screwed for iron pipe or brass ferrule and fixed for 20 mm bore pipe including making connections complete all as specified and directed .

S&F Stop valve, cast copper alloy, screwed down for high pressure with crutch or butter fly handle, screwed both ends for iron pipe of 15mm bore complete all as specified and directed.

S&F in repair 25 mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed all as specified and directed.

S&F pillar taps, chromium plated, fancy type, cast copper alloy with capstan heads, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts screwed for iron pipe of 15mm bore complete all as specified and directed.

Taking up or down 15mm bore steel water tubing alongwith connections in any situation complete all as specified and directed .

Taking up or down 25mm bore steel water tubing alongwith connections in any situation complete all as specified and directed .

M&L for Steel water tubing of 15 mm bore, medium grade, galvanised with all fittings, laid in trenches/ fixed to wall etc complete all as specified and directed .

M&L for Steel water tubing of 25 mm bore, medium grade, galvanised with all fittings, laid in trenches/ fixed to wall etc complete all as specified and directed .

Dismantling PVC/Cement/CI pipes 50 to 110 mm dia including all fittings and removing from site complete all as specified and directed

S&F uPVC (SWR) type B pipes, 110 mm bore, single socketed, in any length with rubber ring joints, fixed to walls including stack clamp of GI flat 30mm wide 2mm thick fixed to wall with nail at spacing of 1m center to center complete all as specified and directed

S&F uPVC (SWR) type B pipes, 75 mm bore, single socketed, in any length with rubber ring joints, fixed to walls including stack clamp of GI flat 30mm wide 2mm thick fixed to wall with nail at spacing of 1m center to center complete all as specified and directed

S&F 32mm dia UPVC pipes of pressure rating 10kgf/sqcm with all fittings , laid in trenches or in floors complete all as specified and directed.

S&F uPVC (SWR) bends 75 mm bore complete all as specified and directed .

S&F uPVC (SWR) bends with access door 75 mm bore complete all as specified and directed .

S&F uPVC (SWR) bends 110 mm bore complete all as specified and directed .

S&F uPVC (SWR) bends with access door 110 mm bore complete all as specified and directed .

S&F uPVC(SWR), junction single, (single 'T') with access door equal or unequal for 75 mm bore complete all as specified and directed

S&F uPVC(SWR), junction single, (single 'T') with access door equal or unequal for 110 mm bore complete all as specified and directed

S&F uPVC(SWR), junction single, (single 'T') equal or unequal for 75mm bore complete all as specified and directed

S&F uPVC (SWR) reducers 110 mm dia complete all as specified and directed.

S&F uPVC (SWR) vent cowl 75 mm dia complete all as specified and directed.

S&F in repair uPVC (SWR) floor trap, plain with grating having diameter of out let 75mm including jointing with solvent cement to waste pipe, fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.

Demolition of Brickwork or stone/boulder masonry,built in cement mortar including all quoins, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed

M&L for brick work with sub class 'B' bricks using old size bricks, straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6 complete all as specified and directed

All as per item No 111 here-in-before but except bricks

M&L for plain cement concrete 1:2:4 ,type B1(using 12.5mm graded crushed stone aggregates)as in lintels upto 1.5m clear span, window or door cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railing upto 60cm in height, copings,side posts of precast jallies etc. including slightly rounded or chamfered angles including necessary formwork complete all as specified and directed.

Demolition of cement concrete (un-reinforced) ground floor to 4th floor and pavings n exc 15 cm thickness (below or above ground level ) and removing the rubbish from the work site to out side defence premises complete all as specified and directed.

M&L for 25 mm thick plain cement concrete 1:2:4, type B-0, (using 12.5 mm graded crushed stone aggregate) as in sub base/ levelling course of floors, finished even and fair complete all as specified and directed.

Complete removal of existing water proofing treatment of any description including under layer, taking down cement plaster any thickness and removal of debris off the premises including grubbing up of trees and preparation of concrete surfaces by scrubbing down with steel brushes and cleaning with water to remove all loose dirt/dust complete all as specified and directed.

M&L for PCC 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregates) as in padding over roof, finished & laid to required slope complete all as specified and directed .

M&L for water proofing treatment in the following sequences:- (a) Applying 1st course of bituminous primer conforming to IS -3384 @ 0.4 Kg/Sqm over the surface till the surface properly impregnated and in solvent oil primer evoporate completely. (b) Applying 2nd coat of blown 85/25 graded bitumen confirming to IS 702 @ 1.2 Kg/sqm. (c) Applying 3rd course of APP (Atactic Polypropylene) modified polymeric membrane 3 mm thick weight not less than 3.6 Kg/Sqm with 160 Grams/Sqm, non woven polyester made at centre core reinforced laid with 75 mm side overlap and 100 mm overlap. The membrane has to be laid with LPG torch and overlap sealed and finished neat complete all as specified and directed .

M&L for 15mm thick rendering in cement mortar 1:4 on concrete surfaces as in roof, finished even & fair and including mixing of water proofing compound complete all as specified and directed . Note:-WPC shall be measured and paid separately

M&L for applying two coats of aluminium paint over APP membrane complete all as specified and directed

Supply only Liquid water proofing compound

Demolition of concrete (reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for Reinforced Cement Concrete 1:2:4, type B1 (using 20mm graded crushed stone aggregates) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies complete all as specified and directed.

M&L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for column, hooking end and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and directed .

M&L for use and waste of form work to soffits of suspended slab such as roof slabs, not exceeding 200mm thick, horizontal or sloping complete all as specified and directed .

M&L for cutting (in brick walls) chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sun shades, shelves, lintels etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting n.exc 10cm girth complete all as specified and directed.

M&L for 75 mm thick plain cement concrete 1:3:6, type C-2 (using 40 mm graded crushed stone aggregate), as in sub base of floors, finished even and fair complete all as specified and directed .

M&L for Chequered cement concrete tiles 30cmx30cmx25mm thick, with grey cement and pigment, set ,jointed and pointed in neat cement slurry as in floors, laid over and including 20mm thick screed bed in cement mortar 1:4 complete all as specified and directed

M&L for providing and laying 60 mm thick factory made charmfered edge cement concrete paver block of M-35 grade of approved colour, design & pattern as in foothpath, parks, lawns, drive ways or light traffic parking etc of required strength , thickness & size/ shape made by table vibratory method using PU mould, laid in required colour & pattern over and including 50 mm thick compacted bed of fine sand, compacting and proper embedding/ laying of interlocking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.

S&F UPVC branch piece, single (single 'Y') with access door for 75 mm bore complete all as specified and directed.

S&F UPVC branch piece, single (single 'Y') with access door for 110 mm bore complete all as specified and directed.

M&L for 4 mm thick PVDF aluminium composite panels consisting of a polyethylenr coresand witched between two 0.4 mm thick aluminium skins and coated with polster resinof PVDF coating confirming any colour and shade as directed by Engr-in charge, in cladding to external wall or ceiling fixed with aluminium frame work with screws and joints to be sealed with silicon, incl necessary scaffolding as required and letters also made with PVDF sheet as per size as directed by engr in charge and letter measured flat as plan area all as specified and as directed.

M&L for Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket complete all as specified and directed .

Taking down carefully existing aluminium/copper point wiring for light, fan, socket or power bell complete with fittings such as Switches, sockets, ceiling roses, holders, call bells etc & making good the disturbed surfaces of walls/ceiling, matching the colour with existing surface complete all as specified and directed. Note : Rate for making good shall be deemed to be included in above item rate.

Taking down unserviceable MCB DB, DP /TPN along with MCB's complete all as specified and directed

Taking down unserviceable submain wiring complete all as specified and directed

Point wiring complete with 1.5 sqmm single core PVC insulated unsheathed cable(ISI marked) 1100 volts grade FRLSH with multistranded copper conductor, drawn through concealed / surface in wall / roof/ceiling surface and its accessories on the surface etc including PVC rigid concealed conduit of suitable size with all accessories such as bend, reducers, MS hooks including modular galvanised flush boxes of suitable size and white cover plate with frame as per relevant IS for mounting modular switches, sockets, fan regulators etc including continuous earth wire of size 1.5 Sqmm PVC FRLSH stranded copper conductor unsheathed, insulated, stranded connected to common earth point dolly for one light point/fan point/call bell point, 230 volts controlled by one switch complete all as specified and directed . Note:- Proper colour coding is to be followed as per IS specifications.

All as per Srl item No 137 here-in-before but for one socket outlet, 3 Pin 5 Amps, 230 Volts on independent board complete all as specified and directed

All as per Srl item No.137 here-in-before but for one three pin socket outlet 5 Amp on the same board with other switches complete all as specified and directed

All as per Srl item No 137 here-in-before but for one 3 pin socket outlet 16 Amp independent with cable of size 2.5 Sqmm for point wiring and 2.5 sqmm as in continuous earth wire complete all as specified and directed

Point wiring complete with 1.5 sqmm single core PVC insulated unsheathed cable(ISI marked) 1100 volts grade FRLSH with multistranded copper conductor, drawn through concealed / surface in wall / roof/ceiling surface and its accessories on the surface etc including PVC rigid concealed conduit of suitable size with all accessories such as bend, reducers, MS hooks including 2mm thick galvanised steel pressed sunken terminal boxes of suitable sizes for mounting of switches, sockets, fan regulator etc covered with 2.8mm thick plastic laminate Hylem / Anchor top cover sheet of required colour, fixed with brass screws and cup washers, painting terminal boxes inside and outside with one coat of red oxide primer including continuous earth wire of size 1.5 Sqmm PVC FRLSH stranded copper conductor unsheathed, insulated, stranded connected to common earth point dolly for one light point/fan point/call bell point, 230 volts controlled by one switch complete all as specified and directed . Note:- Proper colour coding is to be followed as per IS specifications.

All as per Srl item No 141 here-in-before but for one socket outlet, 3 Pin 5 Amps, 230 Volts on independent board complete all as specified and directed

All as per Srl item No.141 here-in-before but for one three pin socket outlet 5 Amp on the same board with other switches complete all as specified and directed

All as per Srl item No 141 here-in-before but for one 3 pin socket outlet 16 Amp independent with cable of size 2.5 Sqmm for point wiring and 2.5 sqmm as in continuous earth wire complete all as specified and directed

S&F modular type switch, one way 6 Amps , 1 module complete all as specifieds and directed .

S&F modular type socket 3 pin, 6 Amps, 2 module complete all as specifieds and directed .

S&F modular type switch, one way, 16 Amps, 1 module complete all as specifieds and directed .

S&F modular type socket 3 pin, 6 A/16 Amps, 2 module complete all as specifieds and directed .

S&F modular type fan regulator,120 Watt, 2 module complete all as specifieds and directed .

S&F ceiling rose, surface backelite, three terminal, 240 volts complete all as specifieds and directed .

S&F LED light fitting 1 x 18Watt, 220V, Integrated batten type with driver, holder including LED tube light, connecting up with three core flexible copper conductor cable of suitable size from ceiling rose with all fixing arrengenment complete all as specifieds and directed . . Note:- The LED batten and LED tube rod shall be of same make.

S&F lamp holder,PVC /Polycarbonate type with back plate for batten fittings complete all as specifieds and directed . .

S&F LED lamp of capacity 10 Watt suitable for B22 holder complete all as specifieds and directed . . .

S&F energy saving new generation 10W LED bulk head luminaire with opal diffuser, IP 65 and including connecting up with twin core twisted flexible copper coductor cable with suitable size of 230 volt,50 Hz complete all as specified and directed.

S&F LED luminaire 600 mm x 600mm, 35/36 watt, 220 V,AC, Recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed

S&F Sheet metal enclosure for DBs,TPN, double door,IP-43 protected, 230 Volts,4 ways with 100 amps rated copper bus bar complete all as specified and directed

S&F MCB SPN, 32 Amp, 240 Volts with rupturing capacity 10 KA, 'C' series, complete all as specifieds and directed .

S&F Sheet metal enclosure for DBs,SPN, double door,IP-43 protected, 230 Volts,8 ways with 100 amps rated copper bus bar complete all as specified and directed

S&F MCB TPN, 40 to 100 Amp, 415 Volts with rupturing capacity 10 KA, 'C' curve, complete all as specifieds and directed .

S&F MCB Single pole, 6 to 32 Amp, 240 Volts with rupturing capacity 10 KA, 'C' series, complete all as specifieds and directed .

Taking down existing ceiling fan of any size/sweep including oiling, greasing, cleaning and applying two coats of synthetic enamel paint after preparation of surface and refixing the same complete all as specified and directed .

S&F Submain wiring with two runs of single core PVC FRLSH unsheathed, insulated, copper cable of 4 Sqmm size, multi stranded, 1100 volts grade with PVC insulated,unsheathed FRLSH copper wire 4 Sqmm for continous earth wire drawn into and including concealed PVC conduit of suitable size complete all as specified and directed . Note :- Two runs of 4 Sqmm copper cable and one run of 4 sqmm copper wire earth continuty conductor in conduit with accessories shall be measured as one length)

S&F Submain wiring with two runs of single core PVC FRLSH unsheathed, insulated, copper cable of 6 Sqmm size, multi stranded, 1100 volts grade with PVC insulated,unsheathed FRLSH copper wire 6 Sqmm for continous earth wire drawn into and including concealed PVC conduit of suitable size complete all as specified and directed . Note :- Two runs of 6 Sqmm copper cable and one run of 6 sqmm copper wire earth continuty conductor in conduit with accessories shall be measured as one length)

S&F Sheet metal enclosure for DBs,SPN, double door,IP-43 protected, 230 Volts,2 ways with 100 amps rated copper bus bar complete all as specified and directed

S&F exhaust fan, steel body, AC single phase. 230 V of size 300 m sweep with, blades and frame and louvers, hanging on wall with 4 Nos steel fasterners 10mm dia & 100mm long including wall hole and making good the disturbed surfaces as per existing complete all as specified & directed

M&L for complete earthing with galvanised mild steel earth plate electrode of size 600x600x6mm thick, burried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the earth plate not less than 1.5 mtr below ground level connected to galvanised earth lead wire 4mm dia (8 SWG) by means of nut, bolt, check nuts and washer of galvanised iron including PCC pit in PCC 1:2:4 type B-1, precast RCC cover slab using reinfocement with XPM weighing not less than 1.87 kg/Sqm with suitable handle made of 12mm round bar including necessary excavation and earth work in any type of soil, 20mm dia medium grade galvanised steel tube for watering with one end fixed with cast iron funnel and wire mesh ,15mm dia light grade galvanised steel tubing upto 7.5 m length for drawing earth lead wire protection, common salt, charcoal, etc complete all as shown in electrical plate No 3 of SSR Part-I and testing on completion complete all as specifieds and directed

S&F switch piano, flush type, single pole, one way, 5/6 Amps, 230 volts, AC supply complete all as specified & directed

S&F socket outlet, 2 in 1, 3 pin, 6 Amps, 230 volts ,AC supply complete all as specified & directed

S&F switch piano, flush type, single pole, one way, 16 Amps, 230 volts, AC supply complete all as specified & directed

S&F socket outlet, 3 pin, 16 Amps, 230 volts ,AC supply complete all as specified & directed

S&F factory made epoxy polyester powder coated distribution board TP&N ,4 ways (VTPN DB), double door,(concealed flush to wall) (IP-42 protection) fabricated from minimum 1.2 mm thick CRCA sheet and fixed on wall and suitable for universal mounting and including 250 Amps bus bar, neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with space for provision for 4 pole MCCB as incommer and outgoing MCBs as required at site and conforming to IS: 8623 along with cable end box including making good disturbed surface complete all as specified and directed. NOTE: (a) MCCBs and MCBs shall be measured and paid separately.(b) All cables terminating into MCBs shall be connected by using suitable copper lugs/thimbles/sleeves and its cost shall be deemed to be included under respective item of BoQ..

S&F electric water heater of capacity 25 litres,BEE 5 Star rated,storage type, steel body vertical type with glass lined /porcelain enamel coated steel inner tank and glass line double ceramic heating element upto 2 KW complete with all accessories such as safety valve,thermostate NRV,connection piece etc and fixing with 04 Nos nut bolt grouting in wall in PCC(1:2:4) using 12.5mm graded stone aggregate for hanging the geyser and making good the disturbed surface complete all as specified and directed

Excavating in trenches, in any type of soil, n.exc 1.5m wide and not exceeding 1.5m in depth for foundation etc or for manholes,piers,shafts etc not exceeding 10 Sqm on plan & not exceeding 1.5m in depth and getting out complete all as specified and directed.

Returning, filling in, including spreading, leveling ,watering and well ramming in layers not exc 25cm in any type of soil complete all as specified and directed .

Removing excavated material or surplus soil to a distance exc 250 meter & not exc 500 meter and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed .

Supply, laying, jointing, testing and commissioning of Low Tension (LT) XLPE insulated, armoured, heavy duty, electric power cable, cross sectional area 50 Sqmm, 3.5 core, aluminum conductor, 1100 volts grade under ground cable including both side connection with lugs/thimbles of suitable size etc, laid in trenches, along poles or passing through pipes or laid under floor or through walls etc, complete including taking out old cable & bricks all as specified and directed. Note: (i) Returning filling, earth work, sand cushioning and cable cover for protection of cable shall be measured and paid separately.

Supply and laying / fixing ,GI pipe, light grade, 40mm dia bore for cable protection fixed to pole/wall with MS clamps, nuts, bolts etc or laid under floor/road/pavement, including taking out old unserviceable pipe complete all as specified and directed.

M&L for sand cushioning with a layer of dry river sand, 80mm thick before laying of cable and 150mm thick (punned down to 100mm thick) after laying of cables, in trenches/ducts, complete all as specified and directed. Note : Punned down thickness (overall 18cm), shall be considered for measurement and payment.

Supplying and laying, factory made unreinforced precast concrete cable cover LV type-1, flat, of size 250x150x40mm, laid flat and dry in trenches over the cable for protection, length perpendicular to the direction of cable adjacent to each other, complete all as specified and directed.

S&F MCCB, 4 Pole,adjustable type ,415 V, 100 Amps with breaking capacity 16 KA including making good the disturbed surfaces complete all as specified and directed.

STAR CONSTRUCTIONS (BID ID -3183392)

CELMAC REGD (BID ID -3183362)