REPAIR REPLACEMENT OF ROOF PLASTER JOINERY PLUMBING AND ALLIED WORS AT HQ RVC C C RVC RECORDS AND ADJACENT AREA UNDER AGE BR II OF GE (NORTH) MEERUT CANTT

Amount

Taking down shutters of any description exc 1 Sqm but not exceeding 2 Sqm each, including builders hard ware fittings complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutter and builders hard ware fittings from frames) not exceeding 1.5 Sqm each, complete all as specified and directed. Note :- Rate also including in this item for necessary cutting down / taking out hold fasts from the existing concrete / brick work and making good the disturbed surfaces with match existing surfaces.

Taking down chowkats or frames with shutters (without taking off shutter and builders hard ware fittings from frames) exceeding 1.5 Sqm but not exceeding 4 Sqm each, complete all as specified and directed. Note :- Rate also including in this item for necessary cutting down / taking out hold fasts from the existing concrete / brick work and making good the disturbed surfaces with match existing surfaces.

Dismantling of floor, hearth or wall tiles / terrazzo including cement mortar bedding (but not backing), removal serviceable tiles to store and rubbish off the premises, complete all as specified and directed.

Demolition of brick work or rubbled stone masonry including all quoins arches, pillars etc built in cement mortar and including removal from the site complete all as specified and directed.

Demolition of cement concrete in ground floors and paving not exceeding 15cm thickness(below or above ground level) and including removal of debris & rubbish from the site complete all as specified and directed. Note : Stone slabs / tiles and hard core of any description shall not be measured & paid under this item.

Dismantling AC sheet corrugated or semi corrugated sheet inc. ridges of any description as in roof and including removal from the site complete all as specified and directed.

Dismantling of wall or ceiling board (fiber, pulp, insulation etc) any thickness including cover fillets and removal from the site complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc and including removal of debris and rubbish from the site complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with oil putty or fixed with beads complete all as specified and directed.

S&F 3mm thick sheet glass, ordinary quality glazing with oil putty or fixed with wooden beads in square not exceeding 0.50 Sqm each pane complete all as specified and directed.

M&L for 15mm thick rendering on fair faces of brick work or concrete surface in cement mortar 1:6 finished even and smooth with out using extra cement complete all as specified and directed.

M&L for applying 10 mm thick rendering on ceiling in cement mortar 1:3 finished even and smooth with out using extra cement complete all as specified and directed.

M&L for 15mm thick in cement mortar 1:4 rendering using ready mix plaster bags on brick/concrete surface of external wall finished even and fair complete all as specified and directed. Make : Ultratech, rediplast, Birla Acrocem. Note Contractor is required to deposit ready mix bags for 100% CA quantity to Engr-in-charge with in 15 days of acceptance of contract.

M&L for preparation of old/new plastered surface of wall and applying two coats of Acrylic exterior Emulsion paint using roller for painting complete all as specified and directed.

M&L for preparation of old/new plastered surface of wall and applying two coats of oil bound distemper using roller for painting complete all as specified and directed.

M&L for Preparing of new/old plastered surface of ceiling and applying two coats of white wash on ceiling complete all as specified and directed.

S&F plain, framed, paneled shutters (any number of panels), of 2nd class Hardwood (HOLLOCK / CHAMP / SAL) 35mm thick with panels of timber flat on both sides (feather edges), or of veneered particle board medium density, wood particle board with commercial face veneers; and fitted to chowkats complete all as specified and directed.

S&F glazed and skeleton shutter shutters 35 mm thick 2nd class hardwood (SAL/ CHAMP / HOLLOCK) open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass gauge, etc.; sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a); for doors and fitted to chowkats complete all as specified and directed.

S&F steel windows with pressed steel frame made out form 1.25mm thick steel with one or more rebate with glazed shutters and ply proofing shutters including guard bars, hinges peg stay handles tower bolts lugs including treated with tar or coal tar black paint on steel surface in contact/embedded in concrete/masonry work complete all as specified and directed. Note- Disturbed surface of wall shall be made good to true surface

S&F steel ventilator with top hung shutter including hinges,. Steel peg stay and including treated with tar or coal tar black paint on steel surfaces in contact / embedded in concrete / masonry work complete all as specified and directed. (Note : Disturbed surface of wall shall be made to good to tune surface)

S&F powder coated anodized aluminium frame for doors , windows, ventilators with one or more rebates with and including weight of joining cleat for fixing etc complete all as specified and directed Note For item No :- 22.00, 23.00 & 24.00 powder coating shall be not less then 50 micron

S&F powder coated aluminium door shutters, aluminium section weighing 0.55 kg/m with and including necessary joining aluminium cleats, aluminium glazing clips, rubber neoprene packing suitable size of aluminium, handles of size 150mm 2 Nos in each door, stainless steel hinges, anodized aluminium snap beading for fixing, glass panes / other filling material in panels, screws etc complete all as specified and directed. Note:- Glass panes / other filling materials in panels shall be measured and paid separately complete all as specified and directed

S&F powder coated aluminium window and ventilator shutters fixed type with out sash bar aluminium section weighing .55 kg/m including necessary joining cleat , glazing clips rubber packing anodized aluminium snap beading screws etc complete all as specified and directed

S&F 4.8mm thickness sheet glass ordinary quality and glazing with oil putty in square not exceeding 0.5sqm in each pane complete all as specified and directed

All as per Srl item No 25.00 here-in-before but exceeding 0.5 Sqm in each pane complete all as specified and directed

S&F floor door stopper of aluminium alloy body and tongue anodized with hard drawn steel spring fixed in floor overall length of cover plate 140mm complete all as specified and directed

S&F door closer hydraulically regulated shutters aluminium (extruded section body) designation No 3 universal type suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg complete all as specified and directed

S&F in repair mild steel wire cloth, 0.36 mm nominal dia. of wire and avg width of aperture 1.40 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed

S&F 30mm thick factory made solid panel PVC door shutter (style) consisting of frame made out of M.S tubes for top & bottom rail MS frame shall be covered with head moulded plain colors complete all as specified and directed

S&F solid PVC door frame of size 50mmX47mm made out of 5mm plain colour PVC sheet reinforced with mild steel square tube complete all as specified and directed

S&F 100mm size butt hinges medium weight cold rolled mild steel complete all as specified and directed

S&F 300 mm long mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed, complete all as specified and directed.

S&F galvanised mild steel wire cloth, 0.63 mm nominal dia. of wire and avg width of aperture 1.40 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed.

S&F aluminium anodized 150mm length of bolt barrel tower bolt of extruded section complete all as specified and directed

S&F 125mm size of aluminium handles cast type anodized complete all as specified and directed

S&F Brass chromium plated tubular towel rail 20mm dia D type 600mm long between flanges complete all as specified and directed

M&L for preparation of new wooden surfaces of any description not otherwise described over 10 cm in width or girth and applying two coat of white / tinted synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of old painted wooden surfaces of any description not otherwise described over 10 cm in width or girth and applying one coat of white / tinted synthetic enamel paint complete all as specified and directed

M&L for preparation of new steel surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide / zinc chrome primer complete all as specified and directed.

M&L for preparation of old painted steel surface of any description over 10 cm in width or girth and applying one coat of white / tinted synthetic enamel paint complete all as specified and directed

S&F anodized aluminium snap grid frame work for false ceiling suspension system of size of grid 605x605 mm complete all as specified and directed.

S&F 4mm thick non asbestos fiber cement building boards fixed or laid /inserted to timber /GI/aluminium frame work with screws complete all as specified and directed

S&F 18/19 mm thick prelaminated particle board ,interior grade prelaminated one side with decorative choice lamination & other side balancing white lamination , fixed with screws timber frame and 5mm thick teak wood beads all round to prelaminated boards including piano type hinges complete all as specified and directed

S&F mild steel Fe-290 (Gide E- 165) for Framed work as in doors , chowkhats or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, support to valley gutters, wind ties for roof sheets, framing for monkey proofing, welded mesh of pitch as decided by engg-in-charge, support to sign board & fencing post, etc. as specified to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed

S&F mild steel Rolled sections Fe 410 -W (grade E-250) quality A as in main and cross beams, base plates, side supports, hip and jack rafters; purlins, where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting member complete all as specified and directed

M&L granite (of any type) tiles 20mm thick machine cut bedded and jointed with grey cement slurry and pointed with white cement with ad mixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed

M&L for 75mm thick cement concrete type C-2 1:3:6(40mm graded aggregate) for plinth protection complete all as specified and directed.

M&L in repair for laying 60 mm thick machine pressed precast PCC colored interlocking paver block moulded in PVC frame / mould any shape and size conforming to IS 15658-2006 of M-35 grade of approved design with grey cement and pigment to match shade / colour / matrix of tiles set and bedded over and including 50mm thick fine river washed sand duly compacted with surface vibrator laid over compacted sub soil in flooring complete all as specified and directed.

M&L for providing 75mm thick cement concrete type B-2 1:2:4(40mm graded aggregate) as in sub base complete all as specified and directed

S&F in repair 15mm bore pillar taps cast copper alloy with capstan heads chromium plated screwed down high pressure with or with out lettered 'Hot or 'cold with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed

S&F in repair 15mm bore brass C.P mixer for mixing hot and cold water screwed down for iron pipe complete all as specified and directed

S&F in repair 15mm bore stop valves cast copper alloy screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for union complete all as specified and directed

S&F in repairs 15mm Gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

All as Srl item No 54.00 here-in-before but 20mm bore

S&F in repairs CP bib tap 15mm bore cast copper alloy with crutch butterfly handle, screwed down and screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repair 15 mm bore bib taps standard of PTMT any colour high pressure screwed for iron pipe or for brass ferrule complete all as specified and directed. (Min weight 15mm - 90gms)

S&F in repairs 20mm plug type bib taps, cast iron screwed for iron pipe and fixed complete all as specified and directed.

S&F in repairs 15mm bore pillar taps of PTMT any colour high pressure screwed for iron pipe (minimum wt 15mm-110grms) complete all as specified and directed.

S&F in repair 15mm bore angle stop valve of PTMT any colour high pressure screwed for iron pipe (minimum wt 15mm-90grms) complete all as specified and directed.

S&F in repairs 20mm bore dia Ball valve high pressure of PTMT with epoxy aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm - 210 gms) complete all as specified and directed.

S&F grating doom 125 mm dia with waste hole of PTMT (minimum weight 40 gms) complete all as specified and directed.

S&F in repairs towel ring of PTMT fixed with and including C.P brass screws and wooden / plastic cleats (minimum wt 90 grms) complete all as specified and directed.

S&F in repair PVC connection 15mm size with PTMT nuts of length 600mm complete all as specified and directed.

S&F PVC (SRW) 75mm floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

Taking up or down GI water tubing 15mm bore and connection including cleaning serviceable pipes for refixing and unserviceable removal from the site complete all as specified and directed

Taking up or down GI water tubing 20mm bore and connection including cleaning serviceable pipes for refixing and unserviceable removal from the site complete all as specified and directed

Taking up or down GI water tubing 25mm bore and connection including cleaning serviceable pipes for refixing and unserviceable removal from the site complete all as specified and directed

S&F GI water tubing 15 mm bore medium grade with all fittings fixed to walls and ceiling or laid in floors including cutting screwing and waste etc complete all as specified and directed.

S&F GI water tubing 20 mm bore medium grade with all fittings fixed to walls and ceiling or laid in floors including cutting screwing and waste etc complete all as specified and directed.

S&F GI water tubing 25 mm bore medium grade with all fittings fixed to walls and ceiling or laid in floors including cutting screwing and waste etc complete all as specified and directed.

S&F in repair 500 liters capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed tap) hoisted and fixed in position all as specified in SSR Part-I complete all as specified and directed.

All as per Srl item No 72.00 here-in-before but capacity 1000 Ltr complete all as specified and directed.

Supply and fixing in repairs PVC low level flushing cistern of 10 Ltr capacity symphonic action type with inlet ball valve, float and handle including PVC brackets for mounting of cistern complete all as specified and directed.

Taking down aluminium shutter exceeding 1 Sqm but not exceeding 2 Sqm and refixing same opening after repair of aluminium shutter such as rubbers gasket hanging of shutter, setting of shutter in original position etc complete all as specified and directed.

S&F repair vitreous china half stall urinal complete including providing and fixing plugs beading urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement including supply and fixing automatic flushing cistern with brackets, flush pipe , grating and union for discharge pipe complete all as specified and directed.

Supply and fixing in repairs vitreous china squatting pan, Orissa' pattern, size 580 x 440mm white, with integral foot rests with and including cast iron 'P' or 'S' trap and setting the trap and pan in and including PCC 1:4:8, type D-2 minimum 150mm thick all round and finished just below level of rim of pan to receive the floor finishing, making all connections complete all as specified and directed.

S&F in repair vitreous china wash basin white flat back size 630X450mm including CP 15mm pillar tap, 32mm CP waste coupling, PVC waste pipe and mild steel brackets complete all as specified and directed.

S&F PTMT multipurpose bath room colored mirror cabinet storage size height 54cm ,35cm width and 13cm depth, wall mount complete all as specified and directed.

M&L for Removal of existing water proofing treatment and providing 15mm thick bedding of cement mortar 1:3 mixed with water proofing compound as per manufactured instruction and applying one coat of bituminous /polymerized primer conforming to IS-3384 @.30 Ltr/Sqm and applying of one coat of bounding material using blown type bitumen confirming to IS 702 grade 85/25 @ 1.20Kg/Sqm and laying of APP modified membrane. Minimum weight 3.5 Kg / Sqm and minimum 3mm thick reinforced with polyster non woven fabric (not less than 150 gms / Sqm) land on primed surface as per manufacturer instruction with minimum 75mm side overlaps and 100mm end overlaps and applying one coat of bituminous aluminium paint @ 0.20 kg / Sqm over APP membrane complete all as specified and directed.

M&L for colored glazed ceramic tiles size 450X350X7mm thick in vertical surface set and jointed in neat cement slurry and pointed in white or colored cement over and including 10mm thick rendering in cement mortar 1:4 finished even and fair complete all as specified and directed.

M&L Non skid colored ceramic tiles 7 to 8 mm thick (square / rectangular) area of each tiles exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc. set & jointed in neat cement slurry and pointed in white or colored cement to match laid over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed".

M&L for vitrified ceramic light shade colored tiles 10mm thick (Square/rectangular) polished area of each tiles not exceeding 0.36 Sqm in floors etc set and jointed in neat cement slurry and pointed in while or colored cement laid over and including 15 thick screed bed in cement mortar 1:6 complete all as specified and directed.

All as per Srl item No 84.00 but on wall as skirting over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed.

M&L vitrified ceramic tiles dark shade /double charged tile 7 to 8 mm thick/ultra charged(square/rectangular) polished , area of each tiles exceeding 0.36 Sqm but not exceeding 0.42 Sqm in floors etc set and jointed in near cement slurry and pointed in white or colored cement to match the colored tiles laid over and including15mm thick screed bed in cement concrete 1:6 complete all as specified and directed.

All as per Srl item No 86.00 but on vertical surface over and including 10mm thick cement mortar 1:4 complete all as specified and directed.

S&F 75mm PVC (SWR) pipe single socketed in any length with rubber ring joints fixed to wall or laid in trenches complete all as specified and directed.

S&F 110mm PVC (SWR) pipe single socketed in any length with rubber ring joints fixed to wall or laid in trenches complete all as specified and directed.

S&F in repair 75mm bore PVC (SWR) bends any radius complete all as specified and directed.

S&F in repair 110mm bore PVC (SWR) bends any radius complete all as specified and directed.

Taking down eaves gutter and rain water pipe and size any pattern PVC /AC pipe including all fittings heads shoes bands etc including removal to store complete all as specified and directed.

M &L for Brickwork with fly ash bricks old size bricks straight or curved on plan exc 6m mean radius built in Cement mortar 1:6 complete all as specified and directed.

Dismantling of timber scantling unframed work 40sqcm and over in section in any position complete all as specified and directed.

All as per Srl item No 94.00 here-in-before but in fillets rails, posts, rafters, purline etc complete all as specified and directed.

S&F stainless steel peg set of 8 Nos in 45cm length strip dia of hooks 6mm complete all as specified and directed.

S&F in repair 5 mm thick, sandwich pattern, PVC Wall lining/wall panelling (sandwiched between the longitudinal grid in PVC Sheet) , consisting of wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC Frame with 5mm PVC fillets complete all as specified and as directed. .

S&F pre-painted galvalume aluminiun zinc coating GI corrugated steel sheet 0.50mm thick of green colour having tensile strength of 550mpa as in roof covering cladding to wall fixed with self tapping screws complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based plain sheet 0.50mm thick of green colour having tensile strength of 550mpa as in roof covering / cladding to wall fixed with self tapping screws complete all as specified and directed.

S&F in repair vitreous china wash down water closet pan (pedestal pattern) white one piece wall mounted type with flushing cistern including connection to drain or outgoing pipe and to flushing pipe antisyphonage pipe etc incl UF soft closed seat cover complete all as specified and directed Make : Jaquar, Cat No : LYS-WHT-38851P

S&F rolled mild steel plate girder or single stanchions built of one beam or channel section with flange plate , caps , bases, spices , angle bracket, cleats and other connection Fe-290 (Gde 165) complete all as specified and directed.

S&F in repair vitreous china colored wash down water closet pan (pedestal pattern) one piece wall mounted type with flushing cistern including connection to drain or outgoing pipe and to flushing pipe antisyphonage pipe etc including UF soft closed seat cover complete all as specified and directed

S&F in repairs 8mm dia , brass chromium plated health faucet with 1 meter long PVC flexible pipe and wall hook complete all as specified and directed.

S&F 0.63mm thick plain black, mild steel sheeting in wall cladding, steel gates and similar work, cut to size, holes, punched including round headed screws clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams including bending or turning up mitered angles etc complete all as specified and directed.

M&L machine cut Kota stone slab flooring 18-20mm thick over and including 20mm thick cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

All as per Srl item No 105.00 but on vertical surface over and including 15mm thick rendering to received Kota stone complete all as specified and directed.

choudhary construction company

B.K.construction

YADAV CONSTRUCTION COMPANY

VIRAT CONSTRUCTIONS

SA construction co.

Arun Construction Co.

M/S AGARWAL CONSTRUCTION CO.