REPAIR MAINT AND IMPROVEMENT TO CERTAIN EM, STP AND DG SET INSTALLATIONS AND ATTENDING COMPLAINTS AND MISC WORKS UNDER GE (A) JAISALMER

Supply installing ,connecting , testing and commissioning of design automation Panel of adequate size in repair having degree of ingress protection IP-67, cubicle type, floor mounted made out of 1.8 mm thick CRCA sheet & MS angle section 50mmx50mmx6 mm frame with sloping roof top type panel cover & compartmentalized for following equipments controls, and door etc with front openable, double door system lockable/openable by keys from front side having flush pattern fancy locks with louvers & air vent gasket for natural flow of air for 3 phase, 2 wire, 440 volts, 50 Hz and CPRI approved make, factory made in approved factory duly powder coated externally as well as internally provided with suitable ''U'' type gasket to make it dust and vermin proof & genral construction confirming to IS:8623/93, with provision of threaded earthing stud at bottom & lifting lugs of suitable size at top to lift the feeder piller box safely including containing of detachable plate having provision for entry of armoured cable of adequate size with glands and mounted on a powder coated metal stand including and other jointing material complete incl taking down old with comprising of the following features:- a) Automatic Valve Control (Motorised Operating Valve). b) Ultrasonic Level transmitter (3 No.) c) Automatic Motor Pump control (6 no.s) d) Single phase motorised operating valves control (13 No.s Nos of MOV)

The panel shall consist of the following equipments :- (a) Selector Switch (Main AUTO/MAN Mode, VALVE Mode, Pump AUTO/MAN Mode). Make:Schneider/ESBEE/SCHINDLER/ C&S (b) Indicator Lamp 230V AC (RED, YELLOW, GREEN, BLUE) Make:Schneider/ESBEE/SCHINDLER/ C&S. (c) Relays / Relay card (24 V DC, 230V AC) MAKE: LEONE/IDEC/SCHNEIDER (d) Hooter/Alarm 230 V AC/24 V DC. MAKE: MINILEC/SCHNEIDER/L&T/C&S/MIMIC (e) Push Buttons & Push Button with LED indicator (24V DC, 240V AC). Make:Schneider/ESBEE/SCHINDLER/ C&S (f) SMPS of suitable current & voltage rating. INPUT 230V AC & OUT 24 VDC, 5 A. MAKE: L&T/ C&S/ MINWELL/SCHNEIDER/NHP (g) Step down Transformer of input 230VAC & output 12VAC, 2A. (h) Programmable Logic Controller (PLC 24V DC). MAKE: ALLEN BRADLEY/ SIEMENS/MITSUBISHI/UNITRONICS (i) 0.5 sqmm internal control wiring. MAKE: POLYCAB/FINOLEX/PRIMECAB/TORRENT. (j) Separate MCB’s for 24VDC & 230 VAC equipment & internal wiring. Supply: 240V, 50 Hz Mounting: Wall Mounting type. (k) Water level controller. Make:- S M INSTRUMENTATION/ L&T/SIEMENS/Minilec

Supply, Installation, Testing and commissioning in repair of Flow/Pressure Switch 1-10KG/sq.cm with Pressure Guage nad necessary fittings with proper wiring installed at delivery line of each pump set as directed by Engineer in charge. Make: INDFOSS/DANFOSS/RAPID CONTROL

Supply, Installation, Testing and commissioning of Air releasing solenoid valve in repair for automatic air release while auto priming mode of each pump set having 10mm dia, 230 V AC operated coil installed at suction line of each pump set complete all as specified & directed by engineer-in-charge. Make:- ROTEX/AVCON/JOHNSON CONTROLS/ASCO

Supply, Installation, Testing and commissioning of magnetic point level sensor in repair for level indication of UG sump and OHT. Make: S M Instrumentation/ Mahalaxmi/Crystal

Supply, Installation, Testing and commissioning of Priming solenoid valve/ Actuator in repair for automatic priming mode of each pump set having 25mm dia, 230 V AC operated coil with complete bypass arrangement for Auto as well as Manual operation complete all as specified & directed, Make:- ROTEX/AVCON/JOHNSON CONTROLS/ASCO

Supply, Installation, Testing and commissioning of motor actuated butterfly valve with the following specifications including all accessories (CI/DI/MS fittings required at site) incl taking down old valve complete as directed by Engineer-in-Charge. (a) Valve size 200mm dia. (b) Designed line pressure 6 kg/Sqcm (c) Operating Angle : 90 degrees (d) Disc material CI with nylon coating (e) Limit switches : 02 Nos for open and close (f) Mounting : Splash proof-Direct on valve/ Extended type as per site requirement. (g) Input Supply : 230V, AC, 50 HZ (h) In built wireless modem compatibility for remote communication (i) Valve position indication with an output of 4-20m A (j) The actuator should be capable of accepting 4-20m A of input of regulating purposes (k) Mannual Operation : Hand Wheel/Rapid Control Make:ROTORK/ S M INSTRUMENTATION/ EMTORK/ HASSEL HOFFNER/ S D TORQUE/ AUMA

Supply, Installation, Testing and commissioning of motor actuated butterfly valve with the following specifications including all accessories ((CI/DI/MS fittings required at site) incl taking down old valve complete as directed by Engineer-in-Charge. (a) Valve size 300mm dia. (b) Designed line pressure 6 kg/Sqcm (c) Operating Angle : 90 degrees (d) Disc material CI with nylon coating (e) Limit switches : 02 Nos for open and close (f) Mounting : Splash proof-Direct on valve/ Extended type as per site requirement. (g) Input Supply : 230V, AC, 50 HZ (h) In built wireless modem compatibility for remote communication (i) Valve position indication with an output of 4-20m A (j) The actuator should be capable of accepting 4-20m A of input of regulating purposes (k) Mannual Operation : Hand Wheel/Rapid Control Make:ROTORK/S M INSTRUMENTATION / EMTORK/ HASSEL HOFFNER/ S D TORQUE/ AUMA

Supply, Installation, Testing and commissioning of motor actuated butterfly valve with the following specifications including all accessories ((CI/DI/MS fittings required at site) incl taking down old valve complete as directed by Engineer-in-Charge (a) Valve size 350mm dia. (b) Designed line pressure 6 kg/Sqcm (c) Operating Angle : 90 degrees (d) Disc material CI with nylon coating (e) Limit switches : 02 Nos for open and close (f) Mounting : Splash proof-Direct on valve/ Extended type as per site requirement. (g) Input Supply : 230V, AC, 50 HZ (h) In built wireless modem compatibility for remote communication (i) Valve position indication with an output of 4-20m A (j) The actuator should be capable of accepting 4-20m A of input of regulating purposes (k) Mannual Operation : Hand Wheel/Rapid Control Make:ROTORK/S M INSTRUMENTATION/EMTORK/ HASSEL HOFFNER/ S D TORQUE/ AUMA

Supply & fixing in replacement 6 core, 1.5 sqmm cross sectional area armoured copper conductor cables, 1100 volts grade heavy duty cable PVC insulated and PVc sheathed, laid in trenches/ laid under floor or fixed maked with walls / on poles/in ducts/in GI pipes etc complete all as specified, Make: Polycab/FSC/Torrent/Finolex