Development of MICE Facility Centre (Chanakya Centre) at MTDC Karla premises Tal Maval Dist Pune

Amount

Dismantling brick masonry in lime or cement mortar and stacking the materils as directed with all leads, lifts etc.

Dismantling stone masonry in lime or cement mortar including stacking the materils as directed with all leads, lifts etc.

Removing lime or lean cement concrete including stacking the spoils as directed with all leads, lifts etc, complete.

Removing rich mix cement concrete including stacking the spoils as directed with all leads, lifts etc, complete.

Removing brick bat coba including stacking the spoils as directed with all leads, lifts etc, complete.

Removing doors and windows with frames and stacking the materials as directed with all leads, lifts etc. complete.

Removing ventilators and small windows with frame and stacking the materials with all leads, lifts etc. complete.

Removing wooden or A.C. partition including frame work and stack-ing the materials as with all leads, lifts etc. complete.

Removing cement tiles, or marble or polished shahabad floor or dado without bed concrete including stacking the materials as directed with all leads, lifts etc. complete

Removing wire fencing with iron/ C.C. fencing post and stacking the materials as directed with all leads, lifts etc. complete.

Removing earthen, stonewate pipe and stacking them as directed with all leads, lifts etc. complete.

Dismantling the R.C.C. Work 1:2:4 and sorting out the materials such as steel etc. as directed and stacking them within the specified lead as directed etc. complete.

Removing single country tiled roof with battens and stacking the materials as directed with all leads and lifts etc. complete.

Removing purlins from roof including stacking as directed with all leads , lifts etc. complete.

Removing rafters from roof including the materials as directed with all leads , lifts etc. complete.

Removing urinal pans or wash hand basins with frame including disconnecting the sanitary and water supply connections, removing the same carefully and stacking the serviceable materials as and where directed including throwing the unserviceable materials outside etc complete

Removing W.C. pans including disconnecting the sanitary and water supply connections, removing and breaking flooring and bed con-crete around pan removing the same carefully and stacking the serviceable materials as adn where directed including throwing the unserviceable materiasls out side etc. carefully and throwing out the refusal outside etc. complete.

Removing Manglore tiled roof and ridge tiles with battens, ridge and barge boards, eaves 8 A boards etc and sacking the materials as directed with all leads and lifts complete. Including removing wood work below etc. complete.

Removal of plants / ficus grown by pulling out root system embedded in masnory, cutting stem and application of high/gur/lime formulation as specified by the Architect or other patented chemical biocide treatment such as biocide 'Glycel' (iso proplamine salt of glyphosate) or other chemical as specified by the Engineer in charge etc. complete.

Lowering down the debris obtained from breaking and removing the cement plaster / burnt brick masonry of the first floor by any means without causing dust nuisance and damage to structure, stacking the same as and where directed including cleaning the site complete.

Removing G.I. or A.C. sheet roofing including purlins, principal rafters etc. including sorting serviceable and unserviceable materials, stacking the same as and where directed in the compound including scaffolding etc. complete.

Removing and lowering the roof truss carefully without damaging the members and stacking as and where directed in the compound including scaffolding etc. complete.

Removing paver blocks of any thickness etc in open passage, footpath, or any flooring laid on ground mechanically or manually and stacking materials and carting away unserviceable materials.

Removing of existing kerb stone, cleaning off old mortar, carting away up to distance of 2 K.M and stacking the same as directedby the engineer.

Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.)

Excavation for foundation in earth, soils of all types, sand,gravel and soft murum, including removing the excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift from 1.5m to 3.0m) By Mechanical Means

Same as above for (Lift from 3.0m To 4.5 m.). By Mechanical Means

Excavation for foundation in Soft rock and old cement or lime masonry foundations including removing the excavated material upto a distance of 50 metres beyond the building area and stacking as directed, including dewatering, preparing the bed for the foundation and necessary back filling with available earth /murum, ramming, watering including shoring and strutting etc. complete (lift upto 1.5m) By Mechanical Means

Excavation for foundation in Soft rock and old cement or lime masonry foundations including removing the excavated material upto a distance of 50 metres beyond the building area and stacking as directed, including dewatering, preparing the bed for the foundation and necessary back filling with available earth/murum, ramming ,watering including shoring and strutting etc. complete. (Lift from 1.5m To 3.0 m.) By Mechanical Means

Same as above for (Lift from 3.0m To 4.5 m.). By Mechanical Means

Excavation for foundation in Hard rock by chiselling, wedging, line drilling, etc. including trimming and levelling the bed, removing the excavated material upto a distance of 50 metres beyond the building area stacking as directed, dewatering and back filling with available earth/ murum watering, ramming etc. complete. (Lift upto 1.5 m). By Mechanical Means

Same as above for (Lift from 1.5m To 3.0 m.). By Mechanical Means

Same as above for (Lift from 3.0m To 4.5 m.). By Mechanical Means

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness.

Excavation for roadway in earth, soil of all sorts, sand, gravel or soft murum including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m. and spreading for embankment or stacking as directed.

Excavation for roadway in hard murum and boulder including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m.and spreading for embankment or stacking as directed.

Excavation for roadway in soft rock, including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m. and spreading or stacking as directed.

Excavation for roadway in hard rock by wedging and chiselling or line drilling including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m. and spreading for embankment or stacking as directed.

Construction of granular sub-base by providing close graded material, spreading in uniform layers with motor grader / Paver on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401 -- By Mix in Place Method and Grading - II Material

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting with Vibratory roller. to the required density. By Mechanical Means - Grading I (Using Screening Type A (13.2) mm Aggregate)

Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) by treating the bottom surface and sides of excavation at the rate of 5 litres of emulsion concentrate of 1.0 percent of chlorophyrifos per square meter of surface area covering 10 years guarantee on bond paper.

Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) by treating the top surface of plinth filling at the rate of 5 litres of emulsion concentrate at 1.0 percent of clorophyrifos per square metre of surface area covering ten years guarantee on bond paper. As directed by Engineer in charge.

Carting away the surplus excavated materials outside the plot by mechanical means to Government bodies approved Dumping ground, including all labour and transportation hire charges and royalty, etc. complete. Regarding the royalty or any other charges will not be the responsibility of the client outside the plot, For Lead up to direction of engineer incharge Extra for lead upto 5 km for Excavated Earth

Same as Above for, Extra for lead upto 5 km for Excavated Rock

Filling in plinth and floors with approved excavated material in 15cm. to 20cm. Layers including watering and compacting etc. complete.

Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. complete.

Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete.

Providing and laying Cast in situ/Ready Mix cement concrete in M15 of trap/ granite/quartzite/gneiss metal for bed blocks, foundation blocks and such other items including bailing out water, plywood/steel formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand

Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap / granite/quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. columns as per detailed designs and drawing or as directed including Steel centering formwork, cover blocks laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap / granite/quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork,cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Below Plinth level and Upto +5.1m level above FFL

Same as Above, For +5.1m level to + 8.6m Level

Same as Above, For 8.6m level to 12.545m level and above

Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap / granite/quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Below Plinth level and Upto +4.35m level above FFL

Same as Above, For +4.35m level to + 8.6m Level

Same as Above, For 8.6m level to 12.545m level and above

Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) For +0.6m level to + 3.3m Level

Same As Above, For +3.3m level to + 8.6m Level

Same As Above, For 8.6m level to 12.545m level and above

Providing and laying Cast in situ/Ready Mixcement concrete M-30 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Below Plinth level and Upto +4.35m level above FFL

Same as Above, For +4.35m level to + 8.6m Level

Same as Above, For +8.6m level to +12.545m level and above

Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C.coping to plinth or parapet and sill of doors and windows moulded as per detailed drawings or chamfered as approved by the Engineer including steel centering, formwork, cover blocks, laying/pumping, compacting , curing , finishing and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Providing and laying Cast in situ/Ready Mix cement concrete in M-30 of trap/ granite/ quartzite/ gneiss metal for R.C.C.coping to plinth or parapet and sill of doors and windows moulded as per detailed drawings or chamfered as approved by the Engineer including steel centering, formwork, cover blocks, laying/pumping, compacting , curing , finishing and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Providing and laying Cast in situ/Ready Mix cement concrete in M-30 of trap/ granite/ quartzite/ gneiss metal for R.C.C. pardi of required thickness including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Below Plinth level and Upto +4.35m level above FFL

Same As Above, For +4.35m level to 8.6m Level

Same As Above, For +8.6m level to +12.545m level and above

Providing and laying Cast in situ/Ready Mix cement concrete in M-30 of trap / quartzite/granite /gneiss metal for R.C.C. Waist slab, and steps of staircases as per detailed design and drawings or as directed including steel centering, plywood/ steel formwork, steel props, laying/pumping, compaction, finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete. (Excluding einforcement, including cover block).(Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc.) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) For +0.6m level to +3.3m level

Same as Above, For +3.3m level to +5.1m level

Providing and fixing in position HCRM / CRS (Corrosion Resistant Steel) bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.

Providing structural steel work of rectangular hollow steel section for steel trusses, other similar trussed items like purlin and members with all bracing, gusset plates etc. as per detailed designs and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted/bolted/ welded connections and one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade complete.

Providing and fabricating structural steel work in rolled sections, fixed with connecting plates or angle cleats in main and cross beams, hip and jack rafters, purlins connecting to truss members and the like, as per detailed designs and drawing or as directed including cutting, fabricating, hoisting, erecting, fixing in position, making riveted/ bolted/ welded connections and one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete.

Providing and Fixing of Foundation Bolts and nuts in RCC column / pedestal / beam at any level including maintaining the accuracy towards line, level & position including making and using the template etc. complete as directed by Engineer In Charge. (Contractor will take due care for its threads and rusting by applying grease and cotton waste.

Providing and fixing mild steel grill work for windows, ventilators, etc. 15Kilogram/OneSquare Metre as per drawing including fixture s necessary welding and painting with one coat of anticorrosive paint and two coats of oil painting complete.

Providing and erecting Y type barbed wire fencing with seven rows of wire with 2.45 mm dia G.I. pipe ( Rezan/ concentiDeleted ire 0.75 mm dia ) with hot dip and G.I. coated hooks as per drawing supported on M.S. angle 50 x 50 x 6 mm at 2.5 mtr. c/c including fixing and fastening with wire, painting M.S. angles with one coat of red lead primer and two coat of oil paint etc. complete.

Providing and fixing mild steel grill railing 20 Kilogram/sq.m with teak wood hand rail of size 75mm x 60 mm.and sill of 75mm.x 25 mm.and newel posts for staircases, including fabricating, fix-tures, erecting, painting the grill work with one coat of anti-corrosive paint and two coats of oil painting with approved colour and polishing the sill, hand rail and the newel post with french polish.

Providing and laying damp proof course 50 mm thick in M20 cement concrete layer and bitumen / using cement with waterproofing compound curing, formwork etc. complete.

Providing and applying two coats of protective membrane over the cured concrete surface like R.C.C. footings, columns, plinth beams etc. which will be submerged under soil so as to protect the same. Apply two pack coal tar epoxy system of Sunepoxy Coaltar of approved make & approved by Engineer in charge, having solid content ranges from 80-100%, Tack free time 4-6 hrs. Recoat after 16-24 hrs. Mix Part A and Part B of Sunepoxy Coaltar of approved make & approved by Engineer in charge in 1:1 ratio with slow speed stirrer and apply the same on a clean R.C.C. surface by brush. Allow to set for 8-10 hours and apply the second coat. The rate to include for application at all levels to various RCC elements to the satisfaction of the EIC etc. complete.

Providing and constructing masonry in Autoclaved Areaclaved ( Celluar) Concrete Block of aproved manufacturer confirming to IS 2185 Part III 1984 of size ( 625x240x225)mm in extra fine jointing mortar of fixoblock of in superstucture including, striking joints,racking out joints watering and scaffolding etc.complete From Plinth Level to Ground Floor level

Same As Above, For+5.1m level to +8.6m level

Same As Above, For + 8.6m level to +12.545m level and above

Providing and constructing masonry in Autoclaved Areaclaved (Celluar) Concrete Block of aproved manufacturer confirming to IS 2185 Part III 1984 of size (625x 240x100)mm in extra fine jointing mortar of fixoblock of Ultra Tech or equivalent in half brick thick wall including 2 hoop iron strips 25mm x 1.6mm at every third course,properly bend and bonded at ends scaffolding racking out joints and watering compete. From Plinth Level to Ground Floor level

same as above, For+5.1m level to +8.6m level

Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in plinth as backing in composite masonry including bailing out water manually, striking joints, raking out joints and watering etc Complete.

Providing random rubble masonry second sort of trap / granite / quartzite / gneiss /jamba stones in cement mortar 1:6 in plinth including bailing out water manually , striking joints on unexposed faces. (Excluding pointing) etc.complete.

Providing random rubble masonry second sort of trap / granite / quartzite / gneiss /jamba stones in cement mortar 1:6 in superstructure racking out joints when plastering is to be done / striking joints when no pointing or plastering is to be done on the inside watering and scaffolding etc.complete.

Providing and applying lacquer coating of required finish to the stone work by spray machine including knotting and preparing the even surface by scraping, applying French polish , scaffolding if required etc. complete. Note:The work to be executed on prior approval of Superintending Engineer will be necessary.

Providing internal / external 12 mm thick Ready Mix plaster confirming to IS:4031(Part-4) 1988 and IS 383- 1970 in a single coat using Cement mortar of proportion 1:4 containing special type of polymer additives about 0.4%, to all type of surfaces in all positions including scaffolding and curing complete.

Providing and applying gypsum plaster ( with Gypsum material ) with finishing with gypsum material in 10 to 13 millimeter thickness to previously plastered surface / or on newly brick surface ( Excluding rough cast plaster ) in all position including preparing and Finishing the surface scaffolding etc.complete.

Providing internal / external 20 mm thick Ready Mix plaster confirming to IS:4031(Part-4) 1988 and IS 383-1970 in a single coat using Cement mortar of proportion 1:4 containing special type of polymer additives about 0.4%, to all type of surfaces in all positions including scaffolding and curing complete

Providing internal cement plaster 6 mm thick in a single coat in cement mortar 1:4 without neeru finish to concrete surface in all positions including scaffolding and curing etc. complete.

Providing and applying Two coats of wall care Putty on plastered surface and Ceiling and Walls to prepare surface even and smooth of approved make, etc complete.

Providing, supplying & fixing 5 mm metalic spacer of approved shade of reputated make etc complete as per detailed drawings and as directed by engineer in charge.

Providing and applying priming coat on concrete/ masonary/ Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete.

Providing and applying plastic emulsion paint of approved quality, colour and shade to new surface in three coats including scaffolding, preparing the surface. (excluding primer coat) etc. complete.

Providing and applying Royale Luxury Emulsion of approved make on internal wall surface as detailed below Scrapping for surface with emery paper and wipe clean for area. wall primer with brush by adding mineral turpentine oil by 8 to 10 % or water by 15 to 20% allowing to dry for 6 to 8 hoursAfter applying acrylic wall putty with appropriate prpportion of water of allow to dry for period of 4 to 6 hours of activity. Scrapping with emery paper and wipe clean Applying paints Royale Luxury emulsion 1st coat with brush water content water 40 to 45% or 65 to 70% by role Applying paints Royale luxury emulsion 2nd coat with brush with water content 40 to 45% or 65 to 70 % by roller. (With prior approval of S.E.)

Providing and applying two coats of water proof cement paint of approved manufacture and of approved colour to the plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days etc. complete.

Providing and applying colour-wash of approved colour and shade in two coats to new surface including scaffolding, brushing and brooming down (excluding base coat of white- wash) etc. complete.

Providing and applying Texture plaster with finishing with Purlina/ Rustic texture material (with texture material of Asian/ Renava/ Nitco/ Temtex or equivalant company make) in 3 to 4 milimeter thickness on previously finished plastered surface including plaster Groove 6mm thick or Tape Grooves 35 to 45 mm thickness or as required in all postion including preparing the surface scaffolding etc. complete. ( Excluding texture Paint and Texture Paint Finishing)

Providing and applying two coats Apex Ultima Puranature Anti-Pollution Or equivalent approved brand, paint should decomposes organic substances and inorganic gases(NOx, VOC’s, CO, SOx, formaldehydes, etc.) in presence of natural or artificial light. It contains Graphene and nanoparticles of titanium oxide. and Absorbs CO2 (4.8 Kilogram/15 l). plaster crack should be filled by Acrylic base Crack seal/Textured Crack filler, Paint has to applied on one coat of Apex Ultima Puranature Anti-Pollution Primer or Equivalent. Warranty Should be given by the Manufaturer The work should be done by the Manufacturer Recommended applicator and he should be able to furnish stage wise onsite technical reports from the concerned company technologist.

Providing and fixing false ceiling with eco-friendly light- weight calcium silicate tiles of spintone surface texture aerolite make or equivalent of size 595mm x 595mm having 15mm thick densified micro look edge and 100% humidity resistance incombustible as per BS 46part IV and thermal conductivity 0.043 w/m 0 KC and NRC 0.50 placed in true horizontal level suspended grid of size 600x600mm made from hot dipped G.I. steel sections ion silhouette profile, rotary stitched double webbed white with 6mm reveal profile (white/black), wherein, main T runner of size 42mmx14mm between main tee 600mm center-tocenter and secondary cross T of size 33x14x0.43mm thick of length 600mm long spaced inter- locked at middle of the first crossed T in each panel to form grid of 1200mmx600mm resting on periphery wall Profile wall section 19mm (7+7) x 19mmx0.40thicknesses and laying false ceiling for services like diffusers grills including cutting, making opening for light fittings, fixtures, , smoke detectors etc., wherever required. Main T runners suspended from ceiling with using G.I. soffit cleats of size 25x35x1.6 mm of required length fixed to the ceiling with 6mm dia and 50mm long dash fastener, 4mm dia G.I. adjustable rods with powder- coated/good quality G.I. level adjustment clips of 35x35x0.8mm spaced @1200, center-to- center along main T all complete at all heights as per the specifications, drawings and as per

Providing and fixing Modular false ceiling of 600 x 600 mm center to center and 13 mm thick square mineral fiber board to be fixed on frame work of alluminium sections for suspended false ceiling consisting of alluminium T 2”x1 ½” (50 mm x 40 mm) weighing 0.39 Kilogram/m at 60 cms center center and fixed with ½” x ½” (15 x 15 mm) flanges weighing 0.19 Kilogram/m suspended on 6 mm dia mild steel rod weighing 0.22 Kilogram/m, fixed on wall and beams including rounding of the edges with alluinium T of 2” x 1 ½” (50 mm x 40 mm) weighing 0.39 Kilogram/m etc. (all alluminium sections shall be anodized) including all labour, material, lifts etc. complete.

Providing and fixing in position Gypsum board false ceiling with 12.5 mm thick Gypsum boards, screwed/fixed to the under structure of suspended G.I. Grid constructed and suspended from the main ceiling consisting of ceiling sections of size 25 x 50 mm maximum center to center distance of 600 milimetre perimeter channel and intermediate channels at maximum center to center distance 1200 milimetre galvanized grid should be fixed to reinforced cement concrete slab. The gypsum board should be fixed to galvanized iron grid with necessary screws. The boards should be taped and filled from underside to give smooth, seamless ceiling. The rate should include necessary additional ceiling sections and intermediate channels. Additional intermediate channels should be fixed to strap hangers for additional support to prevent strapping at every 1200 milimetre item to be completed in all respect including necessary sleeves for ducts finishing of joints cut outs, painting including labour, material, lifts etc. all complete.

Providing and Fixing of GI Lay in Plain metal ceiling consisting of 600x600mm Lay in tiles of pre coated galvanized steel in 0.5 mm thickness in Global white color tile to be laid on grid systems with 15mm wide T - section flanges color white having rotary stitching on the Main Runner, 1200 mm and 600 mm Cross Tees.Providing and Fixing of GI Lay in Plain metal ceiling consisting of 600x600mm Lay in tiles of pre coated galvanized steel in 0.5 mm thickness in Global white color tile to be laid on grid systems with 15mm wide T - section flanges color white having rotary stitching on the Main Runner, 1200 mm and 600 mm Cross Tees.products approved as per GRIHA and BS 476 etc. complete.

Providing and fixing trap door in the Gypsum board / POP ceiling system for elecrical and mechanical utilities with 18mm thk.plywood shutter and 12mm thk. teak wood lipping all around including wooden / G.I. frame with supports, fixtures, fastenings etc.complete as directed.

Providing and fixing chicken mesh of 22 gauge, with about 30 cm. width at the junction of R.C.C members and brick work, of approved quality including fixing mesh in position by necessary drilling in concrete /B.B.masonry and or tying by binding wire etc. complete.

Providing and laying vitrified rustic matt stone finish tiles having size 590 mm to 605 mm x 1180 mm to 1210 mm of 8 to 10mm thickness and confirming to IS. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc. complete.

Providing and fixing frame work of galvanised iron for suspended false ceiling which includes galvanised iron perimeter channels of size 27 mm and 0.5 mm thick having one flange of 20 mm and another of 30 mm along with perimeter of the ceiling, fixing in brick wall / partition with the help of rawal plugs and screws, suspending galvenised iron intermediate channels of size 45 mm and 0.9 mm thick with two flanges of 15 mm each from the soffit at 1200 mm centers with steel galvanised iron hanger of width 25 mm x 0.5 mm fasteners, ceiling section of 0.5 mm thickness having curved wedge of 51.5 mm and two flanges of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with the help of connecting clips and in direction perpendicular to the intermediate channel at 450 mm centers, 12.5 mm dry walls screws at 230 mm centers; fixing screws mechanically either with screw driver or drilling machine with suitable attachment etc. complete.

Providing and fixing false ceiling of 10 to 12 mm thick decorative boards of fibrous plaster of paris including scaffolding if necessary all architectural work like mouldings, cornices, coves, domes, cups as per detailed drawings and three coats of spray painting to boards etc. complete. (excluding frame work, runners and mild steel suspenders).

Providing & Applying Indian Marine Calelalite Treatment to Plaster of Paris false ceiling to make waterrepellent surface complete as directed by engineer in charge.

Providing and laying vitrified matt fininsh tiles having size 590 mm to 605 mm x to 605 mm of 8 to 10 mm thickness and confirming IS. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement morar including neat cement float, filling joints, curing and cleaning etc. complete.

Providing and laying vitrified mirror / glossy finish tiles decorative type having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete.

Supply & Fixing of Rock/ Stone Finished Full Body Vitrifid Steptiles with thick Bullnose for Ready to install Treads and Risers, 16 mm thick and of required width in plain pattern including Cement float, filling joints, with neat cement slurry, Natural sand, curing and cleaning complete. with prior approval of concerned Superitending Engineer.

Providing and laying cement concrete flooring 40 mm thick with M15 cement concrete laid to proper level and slope in alternate bays including compaction, filling joints, marking lines to give the appearance of tiles of 30 cm x 30 cm or other size laid diagonally /square etc finishing smooth (with extra cement) in any colour as directed and curing etc. complete.with Crushed sand VSI Grade

Providing leather finished polishing to Granite Stone slab by continuous grinding in 4 coats of different bits to receive rough and matt finish including buffing process before laying and fixing of stone as per drawing and design, including cleaning, washing and finishing etc. complete.

Providing and Laying vetrified mirror / glossy finish Tiles having size 1200 mm x 600 mm size tiles of 8 to 10 mm thickness and confirming IS. 15622-2006 of approved make, shade, pattern, double charge for Skirting & Dedo in required position laid on bed of 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc. complete.

Providing and laying vitrified matt finish tiles having size 590 mm to 605 mm x to 605 mm of 8 to 10 mm thickness and confirming IS. 15622-2006 (Group Bla) of approved make, shade and pattern for dado and skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc. complete.

Providing and laying vitrified mirror / glossy finish tiles having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for dado and skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete

Providing and laying ceramic tiles having size 30 cm. x 60 cm. confirming to corresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete.

Providing and laying telephone black / Amba White / Cadburybrown / Ruby red / Ocean Brown granite stone of 18 to 20 mm thick for door frame/ dado/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing/moulding the sharp edges wherever necessary, curing, etc. complete.

Providing, supplying & filling Epoxy Grout between tiles with reputated make etc complete as per detailed drawings and as directed by engineer in charge

Providing and constructing granite kitchen platform with fixing of stainless steel sink 600 mm x 450 mm size as per detailed drawing including vertical both side polished kadappah stone 25 to 30 mm thick supports with kadappah top 35 to 40 mm thick and polished granite 16 to 20 mm top with side strips of granite at front and both sides of platform raised with two vertical granite supports 15 cm height and top granite of 75 x 40 cm including cutting, opening for sink of required size in kadappah as well as granite etc. complete. (Platform top size 5.00 m x 0.60 m and height is 0.75 m)

Providing and making wash basin counter in single piece of 18 mm to 20 mm thk. telephone black granite 600mm wide, fixed over 25 to 40 mm thk black Kadappa, sandwich type construction, by making zari, in walls upto 75 mm deep & fitting the wash basin by using M.S. bracket & filling the wall surface by C.M 1:3 etc.(M.S. bracket and wash basin will be paid seperately).

Providing and laying in position flooring of telephone black / Amba White / Cat bary brown / Ruby red / Ocean Brown granite stone of approved shade and size 18 mm to 20 mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing in C.M. 1:3 curing and cleaning etc. complete.

Providing Half-round Moulding ( Full Moulding ) to 18 millimetre to 20 millimetre thick granite stone including fine polishing and cleaning etc. complete

Providing and laying Polished Kota stone flooring With Hand-Cut Polished Kota Stones 25mm to 30mm thick and required width in plain/diamond pattern on bed of 1:6 Cement mortar including cement float, filling joints with neat cement slurry, curing, cleaning and Mirror Polishing etc. complete Note- Water absorption for kota stone should not exceed 0.05%.( Item to be used with prior permission of Superintending Engineer )

Providing and fixing in required position skirting or dado of polished Kotah Stone slab 25 mm to 30 mm thick fixed on base on plaster of cement mortar 1:4 including cement float, filling joints with cement slurry, curing rubbing, polishing and cleaning complete.

Providing and fixing machine cut machine polished 18 mm to 20 mm thick telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone for treads and risers of steps and staircases of approved colour and shade with full moulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaning etc. complete.

Providing leather finished polishing to Kota / Marble / Shahabad / Kadappa Stone slab by continuous grinding in 4 coats of different bits to receive rough and matty finish including buffing process before laying and fixing of stone as per drawing and design, including cleaning, washing and finishing etc. complete.

Providing and laying integral cement based treatment for water proofing on horizontal surface at all depth below ground level for under ground structures as directed by Engineer-in-Charge and consisting of : i) Ist layer of 22 mm to 25 mm thick approved and specified rough stone slab over a 25 mm thick base of cement mortar 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound conforming to IS:2645 in the recommended proportion over the leveling course (leveling course to be paid separately). Joints sealed and grouted with cement slurry mixed with water proofing compound. ii) 2nd layer of 25 mm thick cement mortar 1:3 (1 cement: 3 coarse sand) mixed with water proofing compound in recommended proportions. iii) Finishing top with stone aggregate of 10 mm to 12 mm nominal size spreading @ 8 cudm/sqm thoroughly embedded in the 2nd layer. -Using rough kota stone of size 550 mm x 850 mm

Providing and laying integral cement based treatment for water proofing on the vertical surface by fixing specified stone slab 22 mm to 25 mm thick with cement slurry mixed with water proofing compound conforming to IS:2645 in recommended proportions with a gap of 20 mm (minimum) between stone slabs and the receiving surfaces and filling the gaps with neat cement slurry mixed with water proofing compound and finishing the exterior of stone slab with cement mortar 1:3 (1 cement : 3 coarse sand) 20 mm thick with neat cement punning mixed with water proofing compound in recommended proportion complete at all levels and as directed by Engineer-in-charge : -Using rough Kota stone of size 550 mm x 850 mm

Providing cement based water proofing treatment to terraces (Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in C.M.1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with C.M.1:3 admixed with approved water proofing compound and finally top finishing with average 20 mm. thick layers of same mortar added with jute fiber at 1Kilogramper bag including finishing the surface smooth with cement slurry admixed with approved water proofing compound. Marking finished surface with false squares of 300mm x 300 mm. making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10 years Guarantee against leakproofness on Court fee stamp paper of Rs. 500/- including ponding test etc. complete.

Providing and applying water proofing treatment using acrylic polymer modified cement based water proofing coating with fibre glass mesh mixing at the rate of powder to liquid (2:1) by weight covering 9 to 10 Square Metre /Kilogram with two coat using approved chemicals for masonry and concrete surface by brush covering 7 years guarantee on Stamp Papers etc. complete.

Providing water proof bedding for flooring of Bath and WC 25 mm thick in C.M. 1:3 including using approved water proofing compound in specified proportion as per manufacturers specifications for per bag of cement including leveling, curing and covering 10 years guarantee on court fee stamp paper of Rs.500/- including ponding test etc. complete.

Providing waterproofing in W.C. and bath including brick bat coba in all position including providing and laying 12mm bedding in cement mortor 1:3 on vergin concrete slab with waterproofing compound @ 1Kilogram/per bag of cement laying brick bat coba of required thickness in cm 1:5 with waterproofing compound 1 Kilogram/bag of cement grouting and finishing the top layer with 20mm thick brick bedding in cm mortor 1:3 with waterproofing compound 1 Kilogram/per bag of cement and testing the treated portion for 48 hours by pond test and covering ten years' guarantee on requisite stamp paper including curing etc. complete.

Providing waterproof plaster in W.C. and bath 20 mm thick for dado in cement mortar 1:3 with neat finishing, floating using waterproofing compound at the rate of 1 Kilogram. per bag of cement of approved make and manufacturer and curing (and filling joints of Nahani trap and any outlet by properly) etc. complete.

Water proofing treatment to the chajja after removing old plaster and roughening the surface and finishing the top surface with 20mm thk. 1:2 c.s. plaster with approved water proofing compounds and neat cement finish, the rate also includes for 1:3 c.s. facia of chajja to match the new surface(actual area treated will be paid).

Providing and fixing 20 to 25 mm thick rough shahabad box type waterproofing for basement or underground floor on a base of Cement concrete 1:3:6, including sub base of 2.50 centimeter thick Cement mortar 1:3 with conceal, secrete (RMW), Algae proof or other alike waterproofing liquids, raking of joints upto 35 mm depth, filling the joints with 6 mm size crushed metal, hand grouting with cement slurry, curing and cleaning, with 7 years guarantee on court fee stamp of Rs. 100/- with ponding test etc complete. (excluding Cement concrete 1:3:6 base concrete )

Providing and fixing 20 to 25 mm thick rough shahabad box type waterproofing treatment to vertical outside faces of Reinforced Cement concrete walls of basement or underground floor including filling the gap of 25 mm between rough shahabad and R.C.C. walls with cement grout mixed with water proofing liquid Algae proof or other alike with one tile lift method, brushing the joints horizontally with cement slurry mixed with water proofing liquid for width 30 to 35 mm and sloping coping over topmost tile with cement mortar 1:3, butting the bottom most with Cement concrete 1:2:4 mixed with water proofing liquid, curing, with 7 years guarantee on court fee stamp of Rs.100/- with ponding test etc complete. (excluding Cement concrete 1:3:6 base concrete)

Providing and laying jointless Polydee-LM, a highly flexible elastometric coating for RCC/ cementitious surface for terrace waterproofing on B.B. Coba / R.C.C, after application of TP- 42 Primer on perfectly clean surface (free from loose dust and foreign matter) application of 1st coat of Polydee-LM @ 700 gms/ One Square Metre and applying 2nd coat of Polydee-LM @ 700 gms/ One Square Metre and finishing the same with sprinkling the AG-10 granules on the wet coating. (After finishing covering the treatment with 25mm cement plaster for protection with fibrillated 6mm Plyplast fibre @ 125 gms/ One Square Metre to be paid in separate item.) covering 7 years guarantee on Court Fee Stamp Paper of Rs. 100/- etc. complete.

Providing and fixing shingles on Roof of size 17 x 40 inch to 13.1/4' to 39.1/8' of asphalt. The material are resistance against fire and atmospheric aggressions and are developed using high quality material and cutting edge technology.

Providing and fixing 19 mm thick Plain Bison Panel/Cement sheet including Stainelss steel olts, nuts and scaffolding etc. complete. . Spec. No.: As directed by Engineer-In- Charge

Providing and fixing 12 mm thick Plain Bison Panel/Cement sheet including Stainelss steel olts, nuts and scaffolding etc. complete. . Spec. No.: As directed by Engineer-In- Charge

Providing and filling AAC bats (of size 40-60 mm) with cement mortar mixed in the ratio 1:3:6 (1 cement : 3 coarse sand : 6 block bats) including mixing of approved water proofing compound in recommended proportion for W.C., bath and kitchen. The laid brick bat mix shall be well rammed and compacted as required. Further surfaces shall be screeded with cement concrete mix 1:1.5:3 (1 cement : 1.5 coarse sand : 3 stone grit of size 6 mm and below by volume) admixed withapproved integral water proofing compound in recommended proportion, laid to an average thickness of 25mm and finished smooth or ready to receive finish material as specified. Care shall be taken prior to filling all pipes passing through sunk portion such that the pipes are pressure tested by maintaining pressure for 24 hours and junctions of pipes passing through walls, slabs are well grouted and sealed. This shall be tested by ponding water for required depth andmaintaining for 7 days.(Rate includes cost of brick bats, cement mortar, top screed, labour charges for working at all levels,leads and heights). For payment the area of sunken slab and the depth of filling including the thickness of screed shall be measured.

Providing and Placing in position suitable PVC water stops conforming to IS:12200 for construction/ expansion joints between two RCC members and fixed to the reinforcement with binding wire before

Serrated with central bulb (225 mm wide, 8-11 mm thick)

Providing and fixing frame with / without ventilator of size as specified with Country cut teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil painting, etc. complete

Providing & fixing in position 35 mm thick 1st quality water proof Single Leaf Flush Door for w.c. with 1.5mm thick laminate on both sides with 12x35mm lipping patti on all egdes. Rate is inclusive of s.s.fixtures & fittings, such as handles on both sides, tower bolts, locking arrangement,,door stopper of make ( ozone,Hettich,Hafle ) 450 x 150mm aluminum ventilation grill powder coated, as per architect's detailed drg.and design complete.

Providing and fixing in position, Double leaf flush door of required size including providing & fixing T.W. frame 60mm x 150mm., 45mm thick solid code hard wood block board shutters with 25mm x 45mm lipping patti, allround the shutter & finished with 1mm thick approved textured laminates on either sides, finishing all exposed surfaces of wood with approved shade french polish, treating all the surfaces of wood in contact with masonary with tar paint (Black Japan), chrominum plated brass fittings & fastenings, S.S. handles etc. complete as per detailed drawing and as directed by the Engineer In charge. D2,D3,GL-D1,GL-D2,GL-D3

VIEWING GLASS 5MM AT DOORS WITH BEADING

Providing & fixing in position single leaf flush door of required size for internal doors of residential units, shutters made of 45mm thick marine grade block board core with 25mm x 45mm T.W. lipping patti, 1mm thick approved decorative laminates finish on both faces of shutter, including providing & fixing T.W. frame of 60mm x 150mm size,coating all the exposed surfaces of wood with 2 coats of flat enamel paint of approved shade & make over one coat of approved synthetic primer, coating all the surfaces of wood in contact with masonary with Tar (Black Japan), preparing the surfaces, providing and fixing brass chrome finished or S.S. fittings and fastenings etc complete as per detailed drawing no. WD-26 & as directed by theEngineer in charge.

Fire rated Single leaf Door - Laminate Finish: PnF of Wooden Fire door without Panic Bar of appd make and of required size, 120 minutes fire rating, integrity and insulation in accordance with the criteria of BS 476 ; Part 22 : 1987 and report 212 (1)/FR/2003; Insulation on door leaf only. Tested at Fire Research Lab, CBRI, Roorkee with standard heating conditions as specified in IS : 3809-1979 and BS : 476 part 20 & 22, 1987 to achieve the required integrity & insulation (i.e. to restrict the heat radiation, temp rise on the non fire side to the max of 140 deg Centi above the ambient temp on the unexposed surface of the shutter). Red Mirranti Hard wood frame of section 145mm x 70mm with Intumescent strip (Imported) to take care of Hot and cold smoke of size 10mmx2mmx2Nos. Concealed in the grove of the frame and 55mm thick single leaf shutter made out of perimeter railing of Red Mirranti wood of size 100mmx29mm and promina 60.9mm thick Calcium Silicate Board Fire Retardant compound on each side coated with Intumescent sealant and faced with 4mm thick marine ply with Fire and smoke Intumescent Seal of size 20mmx2mmx1No.,mounted in the grooves in the shutter on all sides except bottom with 10mm thick Hardwood beading on all side. The Fire Doors with frame will be as per IS: 3614 part 2 and BS: 476 part 20 at FRL CBRI Roorkee with standard heating conditions as specified in IS: 3809 - 1979 and BS: 476 part 20 & 22 1987.The door shall be finished with 1 mm thick fire retardent laminate on both side etc. all complete to the entire specs as per Archt Instruction. FRD-2 SIZE1.250x2.250m

Providing and applying melamine polish of required finish to the wood work by spray machine including knotting and preparing the even surface by scraping, applying French polish , scaffolding if required etc. complete. Note:The work to be executed on prior approval of Superintending Engineer will be necessary.

Providing and fixing of factory made uPVC Sliding window & door complete, comprising uPVC multi-chambered frame having in-built uPVC roller track on top and uPVC sash with wall thickness of 2.3mm (+-0.2 mm), duly reinforced with G.I. section 1.5 mm, wherever required. uPVC window & door profile shall be made in India & shall conform to BS EN 12608 and other standards as mentioned below: S.No. Name of the test Test Method Specified Parameter 1 Tensile Impact Strength ISO 8256 - more than 700Kj/m2 2 Vicat Softening Temperature EN ISO – 306 Shall not be < 750C, 3 Charpy Impact Strength EN ISO – 179-2 Shall not be < 20KJ/m2, 4 Flexural Modulus Elasticity EN ISO – 178 Shall not be < 2200 N/mm2, 5 Mean Breaking Stress for welded corner, (a) For the tensile bending test EN – 514 Shall not be < 25 N/mm2, (b) For the compression bending test Shall not be < 30N/mm2, 6 Heat Reversion Test IS:4985-2000 Shall not be > 2.0 % 7 Surface Spread of flame BS : 476 - Part 7 Classification 1 8 Ignitability Evaluation BS : 476 - Part 5 'P' Not easily ignitable, 9 Tensile modulus ASTM D 638 Shall not be < 35 MPa 10 Shear Modulus ASTM D 732 Shall not be < 220 MPa

window / Fixed Window & Casement Door comprising uPVC multi-chambered frame, Sash, & Mullion with wall thickness of 2.3mm (+-0.2 mm ), duly reinforced with G.I. section 1.5 mm, wherever required. uPVC window & door profile shall be made in India & shall conform to BS EN 12608 and other standards as mentioned below: S.No. Name of the test Test Method Specified Parameter 1 Tensile Impact Strength ISO 8256 - more than 700Kj/m2 2 Vicat Softening Temperature EN ISO – 306 Shall not be < 750C 3 Charpy Impact Strength EN ISO – 179-2 Shall not be < 20KJ/m2, 4 Flexural Modulus Elasticity EN ISO – 178 Shall not be < 2200 N/mm2, 5 Mean Breaking Stress for welded corner (a) For the tensile bending test EN – 514 Shall not be < 25 N/mm2 (b) For the compression bending test Shall not be < 30N/mm2 6 Heat Reversion Test IS:4985-2000 Shall not be > 2.0 % 7 Surface Spread of flame BS : 476 - Part 7 Classification 1 8 Ignitability Evaluation BS : 476 - Part 5 'P' Not easily ignitable 9 Tensile modulus ASTM D 638 Shall not be < 35 MPa 10 Shear Modulus ASTM D 732 Shall not be < 220 MPa 11 Tensile Strength EN ISO 527 Shall not be < 30 MPa. All corners of frame and sash will be fusion welded. Mullion shall be welded / screwed. EPDM / TPE Gasket shall be

Same as Above, Fixed Window (Big Series) frame of size 67 x 62 mm & Mullion (if required) of size 67 x 78 mm.

Providing and fixing of factory made uPVC Louver window comprising of uPVC multi-chambered with wall thickness of 2.3mm (+-0.2 mm ), duly reinforced with 1.5 mm thick G. I. Section. uPVC window & door profile shall be made in India & shall conform to BS EN 12608 and other standards as mentioned below: S.No. Name of the test Test Method Specifie Parameter 1 Tensile Impact Strength ISO 8256 - more than 700Kj/m2 2 Vicat Softening Temperature EN ISO – 306 Shall not be < 750C, 3 Charpy Impact Strength EN ISO – 179-2 Shall not be < 20KJ/m2, 4 Flexural Modulus Elasticity EN ISO – 178 Shall not be < 2200 N/mm2, 5 Mean Breaking Stress for welded corner (a) For the tensile bending test EN – 514 Shall not be < 25 N/mm2, (b) For the compression bending test Shall not be < 30N/mm2, 6 Heat Reversion Test IS:4985-2000 Shall not be > 2.0 % 7 Surface Spread of flame BS : 476 - Part 7 Classification 1 8 Ignitability Evaluation BS : 476 - Part 5 'P' Not easily ignitable, 9 Tensile modulus ASTM D 638 Shall not be < 35 MPa 10 Shear Modulus ASTM D 732 Shall not be < 220 MPa 11 Tensile Strength EN ISO 527 Shall not be < 30 MPa.,All corners of frame shall be fusion welded. Both vertical

Providing and fixing glazing panels & doors using 12mm thk toughen clear glass (confirming to ASTM Standards C- 1048) supported byc-channel (embedded in the floor) at the bottom & side edge and wall connecting profile at the top edge,stainless steel articulated countersunk bolts threaded bolts,chemical fasterners,etc., glass panel size as per design and drawing including applying colourless sealant of joint incl.required edge polish, making glazing water tight etc.Destructive node joint test reports to be submitted forestablishing the safety factor, including operating hardware, SS patch fittings, fabricated long length satin finish SS 304 handles,patchlock, floor springs etc., complete as directed by the architect for frameless patch doors,single or twin leaf shutters with fixed panel on top.

Design, supply, fabrication & erection of approved structural glazing using specially designed Vertical Mullion & HorizontalTransoms ofRequired size & as per architect's approved Grid work with aluminium rectangular sections to be fixed in masonary at interval of eachfloor on concrete slab with 80 mm x 100 mm x 5mm thick galvanized M & Langle fixed on wall side with raw bolt size of 10 mm x 90 mm with necessary bolts & washers / nuts for the plumb the linelevels. the glass panel's shall be fixed on a specially designed architectural sub- frame using Dow Corning 995 strural sealant & GE Silicon (SSG - 4000) sub frame would be fixed on main frame grid in amanner that no aluminium frame is visible from outside & groovesbetween the glass panel shall be filled with weather sealant of Dow corning 789 / GE Sil proof to made it air tight, water proof & dustfree thus giving it a flush look outside. Glass will be of 6 mm thickGlaverbel reflective type with heat strenghthened toughened

Providing & fixing factory-made steel door of Single leaf External Embossed Wood finish type with a.) frame of size 100x58 mm conforming to IS : 4351-2003 , 1.2 mm thick pre galvanized sheet with mitred and welded cones , frame stretches, hinge reinforcing plates , fixing plates and hardware mounting plates and Polyurethane foam infill b.) Shutter of thickness 46mm made of 0.8 mm thick slip coated pre galvanized steel sheet on both sides conforming to ASTM A527/ASTM A525, BS 2989 1994, IS 277 , Zinc coating 120 GSM . Lock formed panels with internal stiffeners of 3mm thick made of galvanized sheet, 3 mm thick hinge reinforcing hardware mounting plates and lock protection with Honey-comb craft paper infill of thickness 150 GSM of load bearing capacity 500 Kilogram/ One Square Metre. c.) Finish: Powder coated surface finished with thermosetting polyurethane paint of Aliphatic grade of thickness 60-micron d.) Accessories: Min 8 Anchor fastener of HILTI make, min 3 SS Ball Bearing Butt Hinges of Dorset make, Dorset Mortise lock, SS Tower bolt of 200 mm size, Eye hole, Door stopper complete.

Providing & fixing C.I. Manhole covers with frames / rings for R.C.C., underground water storage tanks/Over Head tank, sizes of covers. (600mm dia.) NOTE:-should be provided with locking arrangement

Supplying & fixing 600 mm (24") to 750 mm (2'-6") long screwed G.I. C class pipe with 3 mm thick M.S. bar flange (plate) welded on it: Flanges should be of Table E of approved make. (Puddle Flange) a) 65 mm(2 1/2")dia pipe 5 mm thick with 150X 150(6" X 6") plate, Both ends Flanged of

Supplying & fixing 600 mm (24") to 750 mm (2'-6") long screwed G.I. C class pipe with 3 mm thick M.S. bar flange (plate) welded on it: Flanges should be of Table E of approved make. (Puddle Flange) c) 100 mm (4")dia pipe 5 mm thick with 250 X 250 (10" X 10") plate, Both ends Flanged

Supplying & fixing 600 mm (24") to 750 mm (2'-6") long screwed G.I. C class pipe with 3 mm thick M.S. bar flange (plate) welded on it: Flanges should be of Table E of approved make. (Puddle Flange) d) 150 mm(6")dia pipe 7 mm thick with 300 X 300 (12" X 12") plate, Both ends Flanged

Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS : 10910, on 12 mm dia steel bar conforming to IS : 1786, having minimum cross section as 23 mmx25 mm and over all minimum length 263 mm and width as 165 mm with minimum 112 mm space between protruded legs having 2 mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture's permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) complete as per design.

Supplying and erecting GI pipe 50mm dia ‘C’ class position with accessories complete as per specification no. CW-PLB/GP.

Supplying and erecting GI pipe 65mm dia ‘C’ class position with accessories complete as per specification no. CW-PLB/GP.

Supplying and erecting GI pipe 75/80mm dia ‘C’ class position with accessories complete as per specification no. CW-PLB/GP.

Supplying, erecting, testing and commissioning of minimum three & above star rated 3 phase, 415 V, 50 Hz, submersible pump set of 7.5 kW/10HP suitable for erection on open well, pump having delivery head from 60 to 28 m and discharge from 120 to 840 litres per minute & 65 mm suction/50 mm delivery dia. as per specification no. WP-OSP.. 150 LPM@ 50MTR HEAD - Domestic Water Supply

Supplying, erecting, testing and commissioning of minimum three & above star rated single phase, 230 V, 50 Hz, submersible pump set of 1.5 kW/2HP suitable for erection on open well, pump having delivery head from 30 to 7 m and discharge from 30 to 600 litres per minute & 50 mm suction/50 mm delivery dia. as per specification no. WP- OSP. 150 LPM@ 25MTR HEAD - Raw tank to WTP plant

Supplying, erecting, testing and commissioning of flat flexible 3 core 2.5 sq.mm PVC sheathed submersible type copper cable suitably clamped at fixed intervals with column pipe assembly complete.

Supplying, erecting, testing and commissioning of flat flexible 3 core 4 sq.mm PVC sheathed submersible type copper cable suitably clamped at fixed intervals with column pipe assembly complete.

Supplying, erecting, testing and commissioning of Automatic control panel for three phase , 415 V, A.C. supply, submersible/centrifugal pump set upto 7.5 HP consisting of D.O.L. starter having relay range 9-14 A, S.P.P., combined ammeter/voltmeter, phase indicating lamp enclosed in CRCA powder coated vibration proof enclosure with IP54 protection with single phasing, phase reversal, phase imbalance, etc.

Supplying, erecting, testing and commissioning of water level controller 230/415 V, A.C. supply , four way under ground & over head tank operation only.

Supplying, erecting, testing and commissioning of minimum three & above star rated submersible pump set for open well of 2.25 kW/3 HP with 415 V, three phase, 50 Hz, A.C. supply having delivery head from 27 to 9 m and discharge from 300 to 660 lpm & 65 mm suction/50 mm delivery dia. as per specification no. WP-OSP. 300 LPM @ 25 MTR - At SUMP

Supplying, erecting, testing and commissioning of flat flexible 3 core 1.5 sq.mm PVC sheathed submersible type copper cable suitably clamped at fixed intervals with column pipe assembly complete.

Supplying, erecting, testing and commissioning of flat flexible 3 core 2.5 sq.mm PVC sheathed submersible type copper cable suitably clamped at fixed intervals with column pipe assembly complete.

Supplying, erecting, testing and commissioning of automatic control panel for single phase, 230 V, A.C. supply submersible/centrifugal pump set upto 3 HP consisting of D.O.L. starter of suitable relay range, S.P.P., combined ammeter/ voltmeter, phase indicating lamp enclosed in CRCA powder coated vibration proof enclosure with IP54 protection.

Supplying and erecting 65 mm dia. cast iron double flange butterfly valve of size complete with PN16 pressure rating, as per specification no. FF-VL/BFV(For Transfer Pump)

Supplying and erecting 75/80 mm dia. cast iron double flange butterfly valve of size complete with PN16 pressure rating, as per specification no. FFVL/ BFV (For Transfer Pump)

Supplying and erecting 75/80 mm dia Cast Iron end line strainer of Y-type flanged end pattern, PN16 pressure rating, SS screen, end connection with Flanged / Screwed / Socket Weld / Butt Weld End etc with standard OAR (open area Ratio) for positive suction complete as per specification no. FF-VL/ELS (For Transfer Pump)

Supplying and erecting 75/80 mm dia cast iron double flange NRV complete with PN16 pressure rating, as per specification no. FF- VL/NRV

Supplying and erecting 100 mm dia. pressure gauge , 0-300 PSI or 0-14 kg per cm square fitted with 12/15 mm dia. pad cock valve, erected with provided G.I. pipe, elbow etc. complete as per specification no. FF-] FFA/PG

Providing, detailing, and fabricating as per specifications, transporting to site and erecting MS Openable / Sliding / Ornamental Entrance Gates including track and wheel, locking arrangement, fixing bolts, nuts, washers, cleats, stiffeners, gussets decorative balusters, arrow heads etc. and all necessary operations like straightening, bending, cutting, drilling, grinding, machining if specified, welding etc. complete weighing 25 to 30 kg/Sqm, including cleaning, Grinding and removing the welding burr and preparing surface and applying one coat of red oxide zinc chromate primer and one coat of Synthetic Enamel paint after fabrication and second coat of Synthetic Enamel paint after erection, with approved colour, shade and brand etc. including touching up with primer etc. complete as directed by Engineer In Charge.

Fabrication, Supply & Installation of MS Portable Cabin on site as per the design drawing provided by the engineer of minimum height 11’ and made of following material Top Frame of 50mm X 50mm Specially Formed M.S Square Pipe, bottom frame of 125 mm X 75mm Specially formed M.S. I Beam , 5mm Thick Horizontal Cross Member :- 100mm X 50mm Specially formed M.S. I Beam, 5mm Thick Vertical Cross Member :- 50mm X 50mm Specially Formed M.S Square Pipe Bottom Frame should be painted with Black Japan kind of material. Using 20mm X 40mm Specially Formed M.S Square Pipe as a stiffener for top, for side wall stiffener having 20 mm X 40mm Specially Formed M.S Square Pipe, and side post having 65mm X 65mm Specially Formed M.S Square Pipe. Outside panelling should be done in Specially Corrugated Sheet in Ms. – 1 mm thick (18 guage). For internal wall panelling 8 mm PRELAMINATED BOARD SHEET. SHADE- HIGHLAND PINE with Bidding Patti and L-Patti in Black Coated Aluminium material should be used. (Internal partitions, toilet/bathrooms toilet fittings and accessories to be paid separately) the rate is inclusive of transportation charges, electricity/diesel generator charges.) Detailed specification & drawing are available with the office of Dy.Ch.E.(HIC).

DENSE BITUMINOUS MACADAM: Proving and laying dense bituminous macadam using crushed aggregates of Grading 1, premixed with bituminous binder of specified grade of Bitumen @ 4.50 per cent by weight of total mix and filler, transported to site with VTS , laid over a previously prepared surface, finished to the required grade, level, alignment, and rolling to achieve the desired density for 76-100 mm compacted thickness .USING Batch mix type hot mix plant with SCADA, Sensor Paver, Vibratory roller with Stone Dust filler.(VG-30 bulk bitumen rates are considered to arrive at rates)

BITUMINOUS CONCRETE:--Providing and laying bituminous concrete using crushed aggregate of grading 1, premixed with bituminous binder @5.40% by weight of total mix and filler, transported at site with VTS, laid over a previously prepared surface, finished to the required grade ,level, alignment, and rolling to achieve the desired density for 50mm compacted thickness with drum mix plant with SCADA, Sensor paver and Vibratory roller excluding prime/Tack coat etc. complete -- Bitumen VG-30 grade with stone dust filler

Providing and applying tack coat on the prepared surface heating by fames in Boiler and spraying bitumen with sprayer on Dry / Hungry B.T. surface 3 kg/10 sqm. (VG-30 bulk bitumen rates are considered to arrive at rates)

Providing and casting in situ or precast tapering R.C.C. M- 20 Semi Barrier type Kerb without gutter ( as per IRC 86 1983) embedded 125mm below ground level over M-10 PCC finished neatly with C.M. 1:2, setting the same in C.M. 1:2, including the required excavation in any strata and removing the excavated stuff any where in city and redoing the surface as specified and directed by Engineering In- charge. Using Concrete Batching and Mixing Plant

Providing and Laying hot applied thermoplastic road marking strip on Bituminous Surface of specified shade/ colour of 2.5 mm thick including 1.5 Refractive index reflectorizing glass beads @ 250gm/sqm .Thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC 35:2015. Initial Dry reflectivity RL shall be > 250 mcd/sqm/lux measured in the initial 7 days and sustained reflectivity RL of 100 mcd/sqm/ lux and Qd of 100 mcd/sqm/ lux measured at the end of 2 years by means of a Standard Reflectometer of Zehntner, Easylux, Delta make capable of measuring RL & QD both according to IRC 35:2015 clause 15.5. The finished surface to be level, uniform, and free from streaks and holes complete as per direction of Engineer-in-charge and in accordance with applicable specifications.(Refer MORTH Clause 803 for technical Specification and Performance for IRC 35:2015).

Providing and fixing of retro- reflectorised informatory sign board rectangular/Square in shape having area less than 0.9 One Square Meterr made out of mm aluminum sheet bonded with white retro reflective sheeting of Class ( Type IV High intensity micro-prismatic grade sheeting- HIP) having pressure sensitive/heat activated adhesive retoreflective specified back ground, border and back side retoreflctive symbols, letters, numerals, arrow as per IRC:67-2012 Table No 8.3, supported with back support frame 25mm x 25mm x 3mm, duly painted on back side with two coats of grey stove enamel paint and supported on one no. mild steel angle iron post 75 mm x 75 mm x 6 mm, 3.5 mt long firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing The angle iron post shall be duly painted with one coat of epoxy primer and two coats of epoxy finish paints having alternate black and white bands of 25 cm width including GI fixures and transportation etc.complete.The nut bolts of board with angle iron post/supporting structure after fixing at site has to be electrically welded. Class B ( Type IV High intensity micro- prismatic grade sheeting-HIP) sheeting shall have 7 years written warranty from the manufacturer and authorised distributor/convertor issued for field performance including the screen printed areas and cut-out sheeting and cut-out durable transparent overlay film and this warranty certificate in original should be submitted to the Engineer in charge by the contractor/supplier.

Providing and applying two coats of flat oil paint of approved colour and shade to internal / external plastered surfaces including scaffolding if necessary, cleaning and preparing the surface (excluding primer coat) etc. complete.

Providing and fixing Speed Breakers of Size 350 W x 500 L x 50 H mm yellow black color as shown in the drawing with necessary fittings & fixtures as directed by EIC.

Supplying & fixing 40 mm thick DI heavy Rain water grating over storm water channel of heavy duty. a) 600 x 300 MM(300wide)

Supplying & fixing 40 mm thick DI heavy Rain water grating over storm water channel of heavy duty. b) 600 x 450 MM (450wide)

Providing and laying R.C.C Pipe (NP3 Class) with collar joints including jointing with CM(1:1) & filleting etc. complete as specified and directed. 150mm dia

Providing and fixing in position uPVC/SWR (Soil/Waste/Rain) pipe of type-B 110 mm dia. in any position including all fittings and accessories, making joints / connections water tight with solvent cement, scaffolding if necessary and making good the damages if any (excluding excavation and refilling the trenches) etc. complete as specified and directed.(All fittings and accessories like clamps,etc. should be of same brand. No separate payment shall be made for fittings and accessories).

Constructing brick masonry valve & meter/RWH chambers in 250mm thick brick masonry in cement mortar 1: 5 using first class bricks constructed over a bed of 150mm thick cement concrete 1:2:4 plastering inside outside and all exposed surface with 20mm thick cement mortar 1.3, finishing inside with a floating coat of neat cement providing & fixing CI frame & cover size, weight mentioned below painting all CI items with 3 coats of approved bitumastic paint etc. complete. Chamber 600 x 600mm clear inside with 600 x 600 CI frame & cover weighting not less than 72kg. Depth of chamber not exceeding 1000mm

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stabilitymfor hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 20 mm nominal dia Pipes

Same as Above, For 50 mm nominal dia Pipes

Same as Above, For 65 mm nominal dia Pipes

Same as Above, For 80 mm nominal dia Pipes

Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:4:8 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S.(non modular) bricks of class designation 3.5

Providing, fixing and testing heavy quality gun metal or brass ball valve with screwed ends 20kgm class on GI or copper pipe lines (Leader/ZOLOTO make) 50 mm (2") dia.

Providing, fixing and testing heavy quality gun metal or brass ball valve with screwed ends 20kgm class on GI or copper pipe lines (Leader/ZOLOTO make) 20 mm (3/4") dia.

Supplying and installing cast iron Butterfly valves PN 16 completewith both sides including flanges on receiving pipes with nuts, bolts,1.5mm thick compressed asbestos gasket insertion as required.65 mm dia.

Supplying and installing cast iron Butterfly valves PN 16 completewith both sides including flanges on receiving pipes with nuts, bolts,1.5mm thick compressed asbestos gasket insertion as required.80 mm dia.

Supplying, laying, jointing & testing UPVC Drainage class pipes of Foamcore Astral (SN 8) or equivalent make in solvent cement joint including leveling with cutting the pipe to required length, roughining of pipe at wall joint including socket as directed: 150 mm pipe

Providing and fixing square-mouth S.W. gully trap class SP- 1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design : With Sewer bricks conforming to IS : 4885

Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.l. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size ), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design: With common burnt clay F.P.S.(non modular) bricks of class designation 7.5

Constructing masonry Chamber 90x90x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.l. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size ), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design: With common burnt clay F.P.S.(non modular) bricks of class designation 7.5

Constructing masonry Chamber 120x120x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.l. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design: With common burnt clay F.P.S.(non modular) bricks of class designation 7.5

Providing and fixing Wall Mounted European type white glazed earthenware water closet pan with UPVC seat and lid with chromium plated brass hinges and rubber buffers including UPVC and vent pipe up to the outside face of wall 10 liter enameled low level flushing cistern with fittings pipe stop tap brackets for fixing cistern 32 mm dia. UPVC flush pipe with fittings and clamps ,20 mm dia.UPVC overflow pipe ,mosquito proof couplings G.I. chain and pulley,with water Jet and fitting including cutting and making good to the walls and floors testing etc. complete.( prior approval of sample and brand by Ex. Engineer is necessary before use)

Providing and fixing European type white glazed earthenware water closet pan with UPVC seat and lid with chromium plated brass hinges and rubber buffers including UPVC and vent pipe up to the outside face of wall 10 litre enameled low level flushing cistern with fittings pipe stop tap brackets for fixing cistern 32 mm dia. UPVC flush pipe with fittings and clamps ,20 mm dia.UPVC overflow pipe, mosquito proof couplings G.I. chain and pulley,with water Jet and fitting including cutting and making good to the walls and floors testing etc. complete.(prior approval of sample and brand by Ex. Engineer is necessary before use)

Providing and fixing white european type wall-hung pan, of size 350mm x 355mm x 570 mm concealed flush tank with floormounting frame installing kit and drain pipe connection set for wall hung WC, with approved make square control plates including soil pipe, vent pipe upto the outside face of wall, 100mm dia C.I. plug bend inlet pipe all fittings,cutting & making good walls, floors etc. complete.

Providing and Fixing toilet set for differently Abled persons consist of Floor Mounted white vitreous china water Closet including 6 litre capacity white vitreous china flushing Cistern with raised soft-push button, white vitreous china wash basin of size 46 x 36 cm and one no SS 304 hinged rail 76 cms & three no SS 304of (Grab Bar) 60 cms all including cutting and making good the walls and floors wherever required ,seat cover, cistern & wash basin fittings,nuts, bolts and gasket etc complete as per the direction of Engineer-In-charge.

Providing and fixing JAQUAR MAKE metropole flush valve Dual Flow Concealed type with control cock operation plate 40 mm size etc. Complete

Providing and fixing C.P. Two way BIB cock of approved make continental including necessary sockets/union nut etc. complete.

Providing and fixing Health Faucet with one metre long easy flex tube in chrome finish and wall flange

White Vitreous China of 'Hindustan &Parryware' make or equivalent under counter type Oval wash basin of size 550 x 480mm with CI brackets suitable for mounting below granite counter including waste fitting with CP brass bottle trap, angle valve with CP connection etc as specified. Oval Wash Basin Model No.10051 OR consider equivalent make.)

Providing and fixing coloured glazed earthenware Wash Hand Basin of 55cm x 40 cm size including cold water pillar tap/cold and hot water pillar tap brackets, rubber plugs and brass chain, stop tap and necessary pipe connection including P.V.C. waste pipe and trap up to the outside face of the wall. Making good the damaged surface, testing etc. complete.

Providing and fixing JAQUAR MAKE, PRESSMATIC Taps Model No. 031 Pillarcock Auto closing system etc complete

Providing and fixing stainless steel sink of size 600 x 510 x 200 mm incluidng coupling, outlet pipe, elbow and other necessary fitting, finishing etc. complete.

Providing and fixing C.P. sink cock with raised J" shaped swinging casted spout ofapproved make including necessary sockets/ union nut etc. complete."

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 a) 15 mm nominal bore 15mm nominal bore

Providing & fixing chromium plated 32mm Jaguar make Series allied modelno. ALD-769 B Bottle trap (with internal partition) for Wash Basins including Waste Coupling fixed in required position with 250mm long wall connection pipes and wall flange with all necessaryfittings and fixtures, etc. complete and as directed by The Engineer incharge.

C.P.Toilet paper holder jaquar make continental (Cat. No. AQ 7751 )

Providing and fixing ISI marked make CP brass liquid soap dispensers with CP brass bracket capacity 250 ml.

Fixing, testing and commissioning of solid state, no touch operating, fully hygienic Hand drier of approved shade with double blower continuous repeat usage, time delay, 'summer and winter control, music while drying, volume ON/OFF controls 'including providing necessary brackets, cable from drier to plug. Plug top 'key and lock etc. complete. (Make : Jaquar, Model No : HDR-SSF -Ak2803D Hand - dryer or Equivalent )

Providing and fixing 450mm x 550mm size superior type Belgium mirror with 16mm dia. nickel plated towel rod etc. complete.

Providing and fixing GLITTERS MAKE, SLOPE series Robe hook etc complete

Providing and fixing white glazed urinal with Pressmatic auto closing valve having flow rate up to 4.0 Litr/Minute of Jaquar/Cera/Hindware /Perryware or equivalent make with P.V.C. waste pipe with fitting arrangement etc.complete as directed by Engineer in charge.( Make shall conform to manufacturer's Green product and shall got approved from the Engineer In Charge.)

Providing and fixing white glazed urinal of size 710x460x300mm with sensotronic concealed type flushing valve for urinal with complete kit having fittings, inlet pipe with stop tap, brackets for fixing the cistern, 32mm diameter P.V.C. flush pipe with fitting and flushing arrangement including lead soil pipe, lead trap & soil pipe connection upto the outside face of wall etc complete.

Providing & fixing 20mm +/- 2mm thick both side mirror polished approved colour Granite Urinal partitions of 600 mm wide & 1550 mm high with round edges moulding and fixed in C.M. 1:2and filling joints in white cement mixed with pigment to match the colour of granite including curing, cleaning etc.complete.(Basic Rate Rs 3600/sqm)

Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 15 mm nominal bore

Providing and fixing H.D.P container one piece moulded water tank made out of high density polythyler and built corrugated inclusive of delivery up to destination hoisting and fixing of accessories such as inlet,outlet overflow pipe inclusive of all tanks capacity between 200 to 1000 liters

Providing and fixing H.D.P container one piece moulded water tank made out of low density polythyler and built corrugation including of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow of all tanks capacity above 1000 to 20,000 litres

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply and all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 20 mm nominal dia Pipes

25 mm nominal dia Pipes

32 mm nominal dia Pipes

50 mm nominal dia Pipes

65mm nominal dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 15 mm nominal dia Pipes

20 mm nominal dia Pipes

25 mm nominal dia Pipes

32 mm nominal dia Pipes

40mm nominal dia Pipes

50mm nominal dia Pipes

Providing and fixing on walls/ ceiling/ floor 32 mm dia. uPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Providing and fixing on walls /ceiling/ floor 40 mm dia. uPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Providing and fixing on walls/ ceiling/ floor 50 mm dia. uPVC pipe with necessary fittings, remaking good the demolished portion etc. complete.

Providing and fixing in position uPVC/SWR (Soil/Waste/Rain) pipe of type-B 75 mm dia. in any position including all fittings and accessories, making joints / connections water tight with solvent cement, scaffolding if necessary and making good the damages if any (excluding excavation and refilling the trenches) etc. complete as specified and directed.(All fittings and accessories like clamps,etc. should be of same brand. No separate payment shall be made for fittings and accessories).

Providing and fixing square-mouth S.W. gully trap class SP- 1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design : 150 x 100 mm size P type: With common burnt clay F.P.S. (non modular) bricks of class designation 3.5

Providing & Fixing 100mm diameter Nahani trap Jali in steel finish with necessary fixing required to make the item well functional.

Providing, fixing and testing heavy quality gun metal or brass ball valve with screwed ends 20kgm class on GI or copper pipe lines (Leader/ZOLOTO make) 25 mm (1") dia.

Providing, fixing and testing heavy quality gun metal or brass ball valve with screwed ends 20kgm class on GI or copper pipe lines (Leader/ZOLOTO make) 32 mm (1 1/4") dia.

Supplying &Fixing screwed cast brass cleanout plug with suitable inset keys & opening, male threaded joint with EPDM rubber gasket jointng as pe DIN- 19543, ASTM C 1277-4. a) 80 mm (3") dia

Supplying &Fixing screwed cast brass cleanout plug with suitable inset keys & opening, male threaded joint with EPDM rubber gasket jointng as pe DIN- 19543, ASTM C 1277-4. b) 100 mm (4") dia.

C.I.Cowl / Vent 75mm dia.

Providing and fixing in position UPVC ultraviolet stabilized 110mm outer diameter cowl dome confirming to I.S.-4985 including making joints with solvent cement etc. complete

Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.

Chairs -Providing and fixing SS (IS 6911:1992) grade of steel 304 Dinning chairs for dining Hall and dining Room area as per the drawing or approved size and shape including all lead lift shifting to work location etc. complete as per architect design & approval

Chairs - Providing and supplying center pivot, revolving, Mid back chair Depth-45cm, width-50cm, height- 105cm to 115cm & seat height 45cm to 55cm. (+/- 2cm ) with five legged metal / moulded nylon base with push back arrangement. Chairs shall have high density moulded, 360 revolving on suitable base, gas lift, heavy duty twin wheel castors to take min 80 kg/castor with two - pneumatic height adjustment one piece moulded type polypropylene armrest etc. complete. The chair shall be provided with approved tapestry upto Rs 300/m with necessary beading wherever required. All metal work shall be Epoxy Polyester Powder Coated and as directed by Architect in charge. The over all appearance of the product shall be as per photograph. All metal work shall be Epoxy Polyester Powder Coated and as directed by Architect in charge. as per architect design & approval

Training Room chairs-Providing & Arrangement of Godrej Make CH 18 C or equivalent comes with a knitted cane seat or comes with Synthetic Leather uphoistery, Scratch and weather-resistant armrests Comes with a full desk let and paper tray complete as per architect design & approval

Meeting chairs- Providing & Arrangement of Midi Back, Normal Syncro Mechanism , Fixed Armrest , Gas lift for Seat height adjustment, Standard 5-prong/Nylon Base with Leather Upholstery complete as per architect design & approval

MID BACK CHAIR Providing and supplying center pivot, revolving, Mid back chair Depth-45cm, width-50cm, height- 105cm to 115cm & seat height 45cm to 55cm. (+/- 2cm ) with five legged metal / moulded nylon base with push back arrangement. Chairs shall have high density moulded, 360 revolving on suitable base, gas lift , heavy duty twin wheel castors to take min 80 kg/castor with two - pneumatic height adjustment one piece moulded type polypropylene armrest etc. complete. The chair shall be provided with approved tapestry upto Rs 300/m with necessary beading wherever required. All metal work shall be Epoxy Polyester Powder Coated and as directed by Architect in charge. The over all appearance of the product shall be as per photograph. All metal work shall be Epoxy Polyester Powder Coated and complete as per architect design & approval

LOW BACK CHAIR Providing and supplying low back chair having size Depth- 62cm, width-55cm, height-80cm & seat height 45 cm. (+/- 2cm ), having seat & back, shall be made up of 1.2 cm hot pressed plywood, approved tapestry upto Rs.300/m and mould polyurethane foam with P.V.C. lipping all around etc. complete. The chair shall be provided with two one piece armrest made of polypropylene. The chair shall be supported by cantilever type powder coated tubular frame Dia 2.54cm x 14 B G M.S.E.R.W. tube. All aluminium steel component shall have Epoxy Polyester Powder Coated. Dry film thickness shall be more than 45 Micron. And as directed by Architect in charge. All metal work shall be Epoxy Polyester Powder Coated and complete as per architect design & approval

Providing and Fixing Dining table of Overall S.S (IS 6911:1992),grade of steel 304, Thickness of the table is 40 mm Structure top to be Of s.s 18 SWG 304,Grit. Under Structure to be Vertical poles of 50 mm Dia (16 gauge 304 grade) and top and Bottom supporting frame Structure to be 50 x 50 mm Square tube etc. complete. Glide shall be of Plastic fixed at the under structure to prevent the damage of table top during stacking. Legs shall be of SS and 38 mm Dia (16 gauge 304 grades). pipe legs are fixed with under structure and table top etc. Complete as per architect design & approval

Cafe table - Providing and Fixing Dining table of Overall S.S (IS 6911:1992),grade of steel 304, Thickness of the table is 40 mm Structure top to be Of s.s 18 SWG 304,Grit. Under Structure to be Vertical poles of 50 mm Dia (16 gauge 304 grade) and top and Bottom supporting frame Structure to be 50 x 50 mm Square tube etc. complete. Glide shall be of Plastic fixed at the under structure to prevent the damage of table top during stacking. Legs shall be of SS and 38 mm Dia (16 gauge 304 grades). pipe legs are fixed with under structure and table top etc. complete asper architect design & approval

Cafe table- Providing and Fixing Dining table of Overall S.S (IS 6911:1992),grade of steel 304, Thickness of the table is 40 mm Structure top to be Of s.s 18 SWG 304,Grit. Under Structure to be Vertical poles of 50 mm Dia (16 gauge 304 grade) and top and Bottom supporting frame Structure to be 50 x 50 mm Square tube etc. complete. Glide shall be of Plastic fixed at the under structure to prevent the damage of table top during stacking. Legs shall be of SS and 38 mm Dia (16 gauge 304 grades). pipe legs are fixed with under structure and table top etc. complete as per architect design & approval

Cash Counter table-Providing and Supplying Reception table of overall size 1650 X 750X 750 mm made out of 19 mm thick Marine ply (IS 710 : 2010) top Sides and apron having Top and bottom horizontal patta. The table shall be externally and internally finished with 4mm thick group match veneer pattern with grooves including necessary lipping moulding and hardware.5 mm thick toughened glass modesty shall be provided with 50 X 30 mm BTC wood frame etc. complete. Antitermite treatment to marine ply and all wooden accessories on both sides for full faces before the joineries melamine polish on French polish basecoat, hardware as per drawings. etc. all complete as per architect design & approval

Single seater sofa Providing and supplying wooden sofa made with minimum 19mm.Marine ply (IS 710 : 2010) structure and internal frame work made of C.P. teak / Maranti wood seat made with minimum 19mm. Marine ply (IS 710 : 2010) and cushion made with foam of 150mm thick - 32 density on seat covered with 14mm thick - 18 density foam. Back made with wooden frame of minimum 50mm X 40mm with 4 mm. ply and covered with foam of 100mm thick - 32 densities covered with 14mm thick - 18 density foam for back extra support to the shape all foam of seat and back covered with tapestry approved by E-I- Charge. (Basic rate Rs. 450/- metre.) Handle made with wooden frame with box of 12mm. ply covered with 14mm thick - 18 density foam with tapestry etc complete as per architect design & approval

Two seater sofa- Providing and supplying wooden sofa made with minimum 19mm.Marine ply (IS 710 : 2010) structure and internal frame work made of C.P. teak / Maranti wood seat made with minimum 19mm. Marine ply (IS 710 : 2010) and cushion made with foam of 150mm thick - 32 density on seat covered with 14mm thick - 18 density foam. Back made with wooden frame of minimum 50mm X 40mm with 4 mm. ply and covered with foam of 100mm thick - 32 densities covered with 14mm thick - 18 density foam for back extra support to the shape all foam of seat and back covered with tapestry approved by E-I- Charge. (Basic rate Rs. 450/- metre.) Handle made with wooden frame with box of 12mm. ply covered with 14mm thick - 18 density foam with tapestry etc. Complete as per architect design & approval

3 seater Sofa seating -Providing and supplying wooden sofa made with minimum 19mm.Marine ply (IS 710 : 2010) structure and internal frame work made of C.P. teak / Maranti wood seat made with minimum 19mm. Marine ply (IS 710 : 2010) and cushion made with foam of 150mm thick - 32 density on seat covered with 14mm thick - 18 density foam. Back made with wooden frame of minimum 50mm X 40mm with 4 mm. ply and covered with foam of 100mm thick - 32 densities covered with 14mm thick - 18 density foam for back extra support to the shape all foam of seat and back covered with tapestry approved by E-I- Charge. (Basic rate Rs. 450/- metre.) Handle made with wooden frame with box of 12mm. ply covered with 14mm thick - 18 density foam with tapestry etc. Complete as per architect design & approval

Center table- Tea Table 900mm X 750mm X 450mm for m.s. ante chamber Providing And Fixing Of Tea Table 900mm X 750mm X 450mm With 12mm Thick Colour Eitched Tempered Glass With Bevelled Drawing Made Out Of 18mm Thick Waterproofing Ply. The Outer Laces To Be Finished With High Quality 4 Mm Thick Veneer Or 1 Mm Thick Mica Etc. Complete as per architect design & approval

Display storage -Providing and supplying Modular CUPBOARD made up of required size. Top made of 25mm Marine ply (IS 710 : 2010), having post formed decorative laminate of 0.8mm on top and FIRE RETARDENT laminate on all sides / surfaces etc. Complete. Sides, Sides in 25mm thick Marine ply (IS 710 : 2010). Adjustable shelf made in 25mm thick Marine ply (IS 710 : 2010) placed on standard shelf pins etc. Complete. Storage Back made of 9mm thick Marine ply (IS 710 : 2010)etc. Sides, Shutters, Bottom, adjustable shelf, finished 2mm thick machine pressed PVC Edge banding of required size etc. Hardware set to include 110 degree opening self- closing box hinges, Counter Sunk screw, S.S. Brush Finished, Handles L’ Clips Selves support etc. complete. Multipurpose lock, Levelling Bolt with inserts etc. complete. Aluminium furniture feet – Round tube, diameter 40 mm with 100 mm height with suitable finish to match handles’' Shape SS Brush finished handles as indicated in the drawing, suitable locking provision etc. complete as per architect design & approval

Executive table- Providing and fixing of Modular table with fixed pedestal having 2 book drawers and 1 file drawer. Table top shall be made of 25mm thick Marine ply (IS 710 : 2010) , FIRE RETARDENT laminate on all sides / surfaces. Sides in 25mm Marine ply (IS 710 : 2010). All boards components like top, sides etc. are finished with 2mm thick machine pressed PVC edge banding in matching colour. (Rehau Make/or Equivalent)for better impact resistance. Other components like modesty panels of 600mm height (apron) shall be made of 18mm thick Marine ply (IS 710 : 2010) in approved colour and shade as per pre- approved sample etc. complete as per architect design & approval Fixed Pedestal Unit-Width of drawer unit shall be of standard size of 450mm. Drawer tray shall of 18 mm thick Commercial Plywood (IS 303 : 1989) completely (bottom included) of size suitable to accommodate telescopic glides for smooth operation All visible edges of drawer trays shall have 2mm thick edge banding to match the colour of the fascia. Inside edge of trays shall have 0.8mm thick PVC edge banding to match the colour of the tray. Front Central lock to be provided for locking all drawers. Aluminium furniture feet – Round tube, diameter 40 mm with 10 mm height adjustable with steel mounting plate with suitable finish to match handles, 'C' Shape SS Brush finished handles as indicated in the drawing, suitable locking etc. complete as per architect design & approval Accessories-Key Board Tray -Size: - Width: 600mm, Depth: 270, Height: 70mm keyboard pullout tray made up

PEDESTAL DRAWER UNIT-Providing and supplying Modular Pedestal unit with 3 drawers of required shape and size, 560 x 450 x 650 mm LxWxH. Top made of 18mm thick Marine ply (IS 710 : 2010), having post formed decorative laminate of 0.8mm on top and 0.6mm balancing laminate on unexposed face. Sides in 18mm both side Prelaminated Particle boards (Interior Grade) and Back made of 9mm thick both side prelaminated particle board, finished with 2 mm thick machine pressed PVC edge band on all edges etc. complete. Width of drawer unit

Executive chair- HIGH BACK CHAIR-Providing and supplying center pivot, revolving, High back chair Depth 45cm, width-50cm, height- 121cm to 131cm & seat height 45cm to 55cm. (+/- 2cm) with five legged metal /moulded nylon base with push back arrangement. Chairs shall have high-density moulded, 360 revolving on suitable base, gas lift , heavy duty twin wheel castors to take min 80 kg/castor with two - pneumatic height adjustment one piece moulded type polypropylene armrest etc. complete. The chair shall be provided with approved tapestry upto Rs 300/m with necessary beading wherever required. All metal work shall be Epoxy Polyester Powder Coated and as directed by Architect in charge. Complete as per architect design & approval

"Visitors chairs-Providing and supplying visitor chair having size Depth- 62cm, width-55cm, height-80cm & seat height 45 cm. (+/- 2cm ), having seat & back, shall be made up of 1.2 cm hot pressed plywood, approved tapestry upto Rs.300/m and mould polyurethane foam with P.V.C. lipping all around etc. complete. The chair shall be provided with two one piece armrest made of polypropylene. The chair shall be supported by cantilever type powder coated tubular frame Dia 2.54cm x 14B G M.S.E.R.W. tube. All aluminium steel component shall have Epoxy Polyester Powder Coated. The chair shall be Ergonomic Dry film thickness shall be more than 45 Micron. And as directed by Architect in charge. The over all appearance of the product shall be as per photograph. All metal work shall be Epoxy Polyester Powder Coated and as directed by Architect in charge."

BACK CREDENZA (750mm)-Providing and supplying Modular Side/Back Credenza made up of required size. Top made of 25mm Marine ply (IS 710 : 2010), having post formed decorative laminate of 0.8mm on top and FIRE RETARDENT laminate on all sides / surfaces. Sides, Sides in 25mm thick Marine ply (IS 710 : 2010). Adjustable shelf made in 25mm thick Marine ply (IS 710 : 2010) placed on standard shelf pins. Storage Back made of 9mm thick Marine ply (IS 710 : 2010) etc. complete. Sides, Shutters, Bottom, adjustable shelf, finished 2mm thick machine pressed PVC Edge banding of required size etc. Hardware set to include 110 degree opening self- closing box hinges, Counter Sunk screw, S.S.Brush Finished, Handles L’ Clips Selves support. Multipurpose lock, Levelling Bolt with inserts etc. complete Aluminium furniture feet – Round tube, diameter 40 mm with 100 mm height with suitable finish to match handles’' Shape SS Brush finished handles as indicated in the drawing provided by architect, suitable locking provision. Execution of this item should be make as per the instructions complete as per architect design & approval

Book storage-Providing and supplying Modular CUPBOARD made up of required size. Top made of 25mm Marine ply (IS 710 : 2010), having post formed decorative laminate of 0.8mm on top and FIRE RETARDENT laminate on all sides / surfaces etc. Complete. Sides, Sides in 25mm thick Marine ply (IS 710 : 2010). Adjustable shelf made in 25mm thick Marine ply (IS 710 : 2010) placed on standard shelf pins etc. complete. Storage Back made of 9mm thick Marine ply (IS 710 : 2010)etc. Sides, Shutters, Bottom, adjustable shelf, finished 2mm thick machine pressed PVC Edge banding of required size etc. Hardware set to include 110 degree opening self- closing box hinges, Counter Sunk screw, S.S.Brush Finished, Handles L’ Clips Selves support etc. complete. Multipurpose lock, Levelling Bolt with inserts etc. complete. Aluminium furniture feet – Round tube, diameter 40 mm with 100 mm height with suitable finish to match handles’' Shape SS Brush finished handles as indicated in the drawing, suitable locking provision etc. complete as per architect design & approval

Librarian table - Providing and fixing of Modular table with fixed pedestal having 2 book drawers and 1 file drawer. Table top shall be made of 25mm thick Marine ply (IS 710 : 2010) , FIRE RETARDENT laminate on all sides / surfaces. Sides in 25mm Marine ply (IS 710 : 2010). ll boards components like top, sides etc. are finished with 2mm thick machine pressed PVC edge banding in matching colour. (Rehau Make/or Equivalent)for better impact resistance. Other components like modesty panels of 600mm height (apron) shall be made of 18mm thick Marine ply (IS 710 : 2010) in approved colour and shade as per pre- approved sample etc. complete as per architect design & approval, Fixed Pedestal Unit- Width of drawer unit shall be of standard size of 450mm. Drawer tray shall of 18 mm thick Commercial Plywood (IS 303 : 1989) completely (bottom included) of size suitable to accommodate telescopic glides for smooth operation All visible edges of drawer trays shall have 2mm thick edge banding to match the colour of the fascia. Inside edge of trays shall have 0.8mm thick PVC edge banding to match the colour of the tray. Front Central lock to be provided for locking all drawers. Aluminium furniture feet – Round tube, diameter 40 mm with 10 mm height adjustable with steel mounting plate with suitable finish to match handles, 'C' Shape SS Brush finished handles as indicated in the drawing, suitable locking etc. Complete as per architect design & approval Accessories Key Board Tray -Size: - Width: 600mm, Depth: 270,

(18 seater Board room table) - Conference table Providing and fixing of Modular Conference table of required size made from modules. Each table module top should be made up of 30mm / 32mm thick Marine ply (IS 710 : 2010). Gable ends Sides in Marine ply (IS 710 : 2010) . All boards’ components like top, sides etc. are finished with 2mmthick machine pressed PVC edge banding in matching colour. (Rehau Make/or Equivalent) for better impact resistance etc. complete. Other components like modesty panels of 600mm height (apron) shall be made of 18mm thick Commercial Plywood (IS 303 : 1989) in approved colour and shade as per pre approved sample. Adjustable levellers to be provided to gable end supports etc. complete as per architect design & approval

18 seater Board room table SEMI CIRCLE END- Providing and fixing of Modular Conference table of required size made from modules. Each table module top should be made up of 30mm / 32mm thick Marine ply (IS 710 : 2010). Gable ends Sides in Marine ply (IS 710 : 2010) . All boards’ components like top, sides etc.are finished with 2mmthick machine pressed PVC edge banding in matching colour. (Rehau Make/or Equivalent) for better impact resistance etc. complete. Other components like modesty panels of 600mm height (apron) shall be made of 18mm thick Commercial Plywood (IS 303 : 1989) in approved colour and shade as per pre approved sample. Adjustable levellers to be provided to gable end supports etc. complete as per architect design & approval

Board room chairs- Providing & Arrangement of High Back Chair - TILT MECHANISM WITH MULTILOCKING, HIGH DENSITY CUSHION ON SEAT COMPOSITE LEATHER WITH METALLIC SILVER FINISH BASE AND ARMS WITH P.U.CASTORS GASLIFT FOR HEIGHT ADJUSTMENT. Complete as per architect design & approval

(Podium) WOODEN DIAS-WOODEN DIAS : Providing and fixing Wooden Dias of size 600x 600 x 1420 mm height in as per the detail specification given below. Top size (600 x 600 mm ) side (600 x 1420 mm), front side (600 x 1420 mm) made up in 19 mm thick Marine Plywood (IS 710 : 2010) of requisite manufacturer's viz. Green / Anchor / Centuary or equivalent approved make including necessary facias etc. with necessary lipping (BTC), mouldings as required including cutting, fixing, finished with 1 mm thick laminate of approved make , type, colour and shade of glossy / Matt / Suede / Fine / Line / Wood grain finished lamination pattern with / without grooves as required to exposed surface and edges and the internal / hidden surface shall be finished with 0.80 mm thick laminate of approved make. Area other than laminated surfaces shall be finished with two coats of French polish of approved shade. Antitermite treatment to plywood and woodwork with ten years guarantee bond etc. including all leads lifts etc. complete as per the instructions of the Architect & Engineer-in-charge.

SIDE / BACK CREDENZA (750mm)- Providing and supplying Modular Side/Back Credenza made up of required size. Top made of 25mm Marine ply (IS 710 : 2010), having post formed decorative laminate of 0.8mm on top and FIRE RETARDENT laminate on all sides / surfaces. Sides, Sides in 25mm thick Marine ply (IS 710 : 2010). Adjustable shelf made in 25mm thick Marine ply (IS 710 : 2010) placed on standard shelf pins. Storage Back made of9mm thick Marine ply (IS 710 : 2010) etc. complete. Sides, Shutters, Bottom, adjustable shelf, finished 2mm thick machine pressed PVC Edge banding of required size etc. Hardware set to include 110 degree opening self- closing box hinges, Counter Sunk screw, S.S.Brush Finished, Handles L’ Clips Selves support. Multipurpose lock, Levelling Bolt with inserts etc. complete Aluminium furniture feet – Round tube, diameter 40 mm with 100 mm height with suitable finish to match handles’' Shape SS Brush finished handles as indicated in the drawing provided by architect, suitable locking provision. Execution of this item should be make as per the complete as per architect design & approval

Stage 150 mm height-Providing & fixing in position Stage flooring Made from 18mm plywood 1200 x 2400 & 18mm Teakwood planks 100 x 800 having tongue & grove on Sal- wood frame of 50 x 100 at 600mm c to c on stage surface including cost of required Cut-Outs, decorative mouldings / finishing-items / polish etc., as per Architectural & Acoustical Design & Instructions & Complete in all aspects. .including all materials labour, finishing etc complete as per architect design & approval

Acoustical Panelling-Providing & Fixing in position, Acoustical Panelling made from Fabric wrapped Compressed polyester fibre nonwoven 9 mm panels on, 50 x 50 mm sal-wood frame of 600 x 600 c to c having wooden supports from wall of required length, in front of 1000 gsm synthetic wool 50 mm thick with chicken mesh on wall side, including cost of required Cut-Outs, decorative mouldings / finishing-items / paint & Scaffolding, as per Architectural & Acoustical Design & Instructions & Complete in all aspects. Including all materials labour, finishing etc complete as per architect design & approval

Providing & fixing acoustic panelling to wall in glass wool/ racron & perforated acoutic board with 10 mm foam with fabric panel for acoustic panel purpose etc. complete as directed by Engineer in charge.

Laminated panelling-Providing & Fixing in position, Acoustical Panelling made from 12mm wp Ply wood & 1.5mm laminate on, 50 x 50 mm Sal-wood frame of 600 x 600 c to c having wooden supports from wall of required length, in front of 1000 Gsm synthetic wool 50 mm thick with chicken mesh on wall side, including cost of required Cut-Outs, decorative mouldings / finishing-items / paint & Scaffolding, as per Architectural & Acoustical Design & Instructions & Complete in all aspects. Including all materials labour, finishing etc complete

Providing and fixing in position Box Panelling made up of 19mm thick plywood of approved quality make (Like Greenply,Century, Commander, Biz,etc.) for sides and exposed parts are finished applied with palliate sheet of approved shade sticked with approved quality glue of Fevicol make and abrotape including Ammonium Thoicyanate Distillate polish of all surface Nails,screws,complete as per detailed drawings and as directed by Engineer in Charge

Laminated Partition- Providing & fixing FULL HEIGHT BOTH SIDE LAMINATED PARTITION at required location having height more than 2.8 meter & minimum 77 mm thick made by using 50 x 50 mm (finished size) approved quality seasoned TW section framing at 600 mm center to center, covered with 12 mm marine ply generally confirming to I.S.303 / I.S.710-1980 on both sides. The partitions shall be finished with 1.5 mm thk.approved quality laminate matt/suede/fine line finished lamination pattern with grooves on both sides with necessary lipping (BTC) moulding. Antitermite treatment to plywood and woodwork, door frame including all leads & lifts etc complete as per Architect's Drawing and instructions of Engineer In Charge.

Providing and fixing in position Partition for corporate cabins made up of Bracing of 19mm 3 piece Waterproof ply 0.25 x 0.25mt Partitions and laying 9mm thick waterproof plywood make (Like Greenply,Century, Commander, Biz,etc.) on Bracing and exposed parts are covered with Formica finished and top with 12mm ply etc. Complete as directed by Engineer in charge

10 seater Meeting room table- Conference Table @ 3600Lx1400Dx750HT Providing & Fixing of Main Table @ 3600Lx1400Dx750HT - made up of 18+18mm Thick MDF top with PVC Membrane finish and waterfall edge profile. Aluminium Anodizied finish beeding of 4mm thich is running all over the table top edge. Gable ends is Aerofoiled Shape with front edges in PVC Membrane finish and rest in Prelaminated MDF with batton structure. Gable ends should be hollow from inside for the provision of passing electrical and Data wiring. , MODESTY PANEL:- to be made of 18 mm thick Prelaminated particle board with PVC edge band Access Flap:- For Wire manager 2 Nos.complete as per architect design & approval

Providing and constructing raised platform of 750 mm wide and 600 to 750mm high using minimum 40mm thick polished kadappa stone slab base with minimum 15mm thick polished stone top as specified below of approved quality, colour and texture, supported by both side polished, 40mm thk. and minimum 700mm wide kadappa spaced at not more than 1200mm clear, including polished facia of min. 100mm height as specified below with champhered/ rounded at the top edges, jointing in approved adhesives, machine cutting, making opening for sink and fixing the same in position, leveling, smooth cement plastering along the sides to match the existing surface in cement mortar, filling the joints with pigment mixed with cement, cleaning, finishing,curing etc complete as directed by Engineer In Charge. (The cost of providing the sink shall be paid extra as per plumbing items uby red / jet black / Hasan green Granite slab at top and faciacomplete as per architect design & approval

Corner table - Providing and supplying corner table of required size with top made of 8mm thick bevelled glass and under structure made of 18mm thick Marine ply (IS 710 : 2010) with all exposed edge are finished with 2mm thick machine pressed PVC edge banding in matching colour. (Rehau Make/ or Equivalent) for better impact resistance etc. complete. Nylon button stopperto hold glass top in position, Nylon bushers etc. complete as per architect design & approval

12 Seater Reading Table for Library @ 3600Lx1200Dx750HT: Providing and Fixing 12 Seater Reading Table for Liberary @ 3600Lx1200Dx750HT Top: made from 25 mm Prelaminated Particle board. All edges are covered by 2 mm. Thk. PVC edge bands glued by hot melt glue applied by auto edge banding machine. Gable Ends : made from 25 mm Prelaminated Particle board. All edges are covered by 2 mm. Thk. PVC edge bands glued by hot melt glue applied by auto edge banding machine. Modesty panel : Made from 18mm both side prelaminated particle boards.All edges are covered by 0.8mm PVC edge bands glued by hot melt glue applied by auto edge banding machine complete as per architect design & approval

SIDE / BACK CREDENZA (750mm)- Providing and supplying Modular Side/Back Credenza made up of required size. Top made of 25mm Marine ply (IS 710 : 2010), having post formed decorative laminate of 0.8mm on top and FIRE RETARDENT laminate on all sides / surfaces. Sides, Sides in 25mm thk Marine ply (IS 710 : 2010). Adjustable shelf made in 25mm thk Marine ply (IS 710 : 2010) placed on standard shelf pins. Storage Back made of 9mm thick Marine ply (IS 710 : 2010) etc. complete. Sides,Shutters, Bottom, adjustable shelf, finished 2mm thick machine pressed PVC Edge banding of required size etc. Hardware set to include 110 degree opening self- closing box hinges, Counter Sunk screw, S.S.Brush Finished, Handles L’ Clips Selves support. Multipurpose lock, Levelling Bolt with inserts etc. complete Aluminium furniture feet – Round tube, diameter 40 mm with 100 mm height with suitable finish to match handles’' Shape SS Brush finished handles as indicated in the drawing provided by architect,suitable locking provision. Execution of this item should be makecomplete as per architect design & approval

12 seater Confernce room table-Conference table Providing and fixing of Modular Conference table of required size made from modules. Each table module top should be made up of 30mm / 32mm thickMarine ply (IS 710 : 2010). Gable ends Sides in Marine ply (IS 710 : 2010) . All boards’ components like top, sides etc. are finished with 2mmthick machine pressed PVC edge banding in matching colour. (Rehau Make/or Equivalent) for better impact resistanceetc. complete. Other components like modesty panels of 600mm height (apron) shall be made of 18mm thick Commercial Plywood (IS 303 : 1989) in approved colour and shade as per pre approved sample. Adjustable levellers to beprovided to gable end supports etc. complete as per architect designe & approval

Executive table Providing and fixing of Modular table with fixed pedestal having 2 book drawers and 1 file drawer. Table top shall be made of 25mm thick Marine ply (IS 710 : 2010) , FIRE RETARDENT laminate on all sides / surfaces. Sides in 25mm Marine ply (IS 710 : 2010). All boards components like top, sides etc. are finished with 2mm thick machine pressed PVC edge banding in matching colour. (Rehau Make/or Equivalent)for better impact resistance. Other components like modesty panels of 600mm height (apron) shall be made of 18mm thick Marine ply (IS 710 : 2010) in approved colour and shade as per pre- approved sample etc. complete as per architect design & approval Fixed Pedestal Unit-Width of drawer unit shall be of standard size of 450mm. Drawer tray shall of 18 mm thk Commercial Plywood (IS 303: 1989) completely (bottom included) of size suitable to accommodate telescopic glides for smooth operation All visible edges of drawer trays shall have 2mm thk edge banding to match the colour of the fascia. Inside edge of trays shall have 0.8mm thk PVC edge banding to match the colour of the tray. Front Central lock to be provided for locking all drawers. Aluminium furniture feet – Round tube,diameter 40 mm with 10 mm height adjustable with steel mounting plate with suitable finish to match handles, 'C' Shape SS Brush finished handles as indicated in the drawing, suitable locking etc.complete as per architect design & approval Accessories Key Board Tray -Size: - Width: 600mm, Depth: 270, Height: 70mm keyboard pullout tray made up

Executive table side Credenza-Providing and supplying Modular Side/Back Credenza made up of required size. Top made of 25mm Marine ply (IS 710 : 2010), having post formed decorative laminate of 0.8mm on top and FIRE RETARDENT laminate on all sides / surfaces.Sides, Sides in 25mm thk Marine ply (IS 710 : 2010). Adjustable shelf made in 25mm thk Marine ply (IS 710 : 2010) placed on standard shelf pins. Storage Back made of9mm thick Marine ply (IS 710 : 2010) etc. complete. Sides,Shutters, Bottom, adjustable shelf, finished 2mm thick machine pressed PVC Edge banding of required size etc. Hardware set to include 110 degree opening self- closing box hinges, Counter Sunk screw, S.S.Brush Finished, Handles L’ Clips Selves support. Multipurpose lock, Levelling Bolt with inserts etc. complete Aluminium furniture feet – Round tube, diameter 40 mm with 100 mm height with suitable finish to match handles’' Shape SS Brush finished handles as indicated in the drawing provided by architect,suitable locking provision. Execution of this item should be make complete as per architect design & approval

Executive table back Credenza--Providing and supplying Modular Side/Back Credenza made up of required size. Top made of 25mm Marine ply (IS 710 : 2010), having post formed decorative laminate of 0.8mm on top and FIRE RETARDENT laminate on all sides / surfaces.Sides, Sides in 25mm thk Marine ply (IS 710 : 2010). Adjustable shelf made in 25mm thk Marine ply (IS 710 : 2010) placed on standard shelf pins. Storage Back made of9mm thick Marine ply (IS 710 : 2010) etc. complete. Sides,Shutters, Bottom, adjustable shelf, finished 2mm thick machine pressed PVC Edge banding of required size etc. Hardware set to include 110 degree opening self- closing box hinges, Counter Sunk screw, S.S.Brush Finished, Handles L’ Clips Selves support. Multipurpose lock, Levelling Bolt with inserts etc. complete Aluminium furniture feet – Round tube, diameter 40 mmwith 100 mm height with suitable finish to match handles’' Shape SS Brush finished handles as indicated in the drawing provided by architect,suitable locking provision. Execution of this item should becomplete as per architect design & approval

L - SHAPE WORKSTATION TABLE TOP WITH ONEGABLE END SUPPORT-Providing table top of required size fixed at a standard table top height of upto750mm min (including table top thickness). Table top shall be made of 25mm thick Marine ply (IS 710 : 2010), FIRE RETARDENT laminate on all sides / surfaces. All edges of the work surface shall be provided with machine pressed PVC edge banding of 2mm thickness etc. complete. Table top to be principally mounted from the partition frame with suitable MS powder coated brackets whichshould be integrated into the partition frame. Gable End Supports of approved profile and design between tables consisting of 18mm Marine ply (IS 710 : 2010) panels duly edge bound (to be integrated with the partition. Adjustable levellers to be provided to supports.) etc. complete. as per architect design and approval Accessories Key Board Tray - Size: - Width: 600mm, Depth: 270, Height: 70mm keyboard pullout tray made up of durable ABS (Acrylonitrile Butadiene Styrene)material provide with sliding telescopic channels. The trayhanged below the top by steel MSbrackets. Finish: All steel components should be epoxy powdercoated after seven tanks anti corrosion pre- treatment of surface. ABS wire managers to be provided where required for the table top. CPU Trolley: Size: - Width: 180mm Depth: 245mm, Height: 210mm Made up of press formed MS CR sheetFinish provision for height & width adjustment. All steel components should be epoxy powder coated after

WORKSTATION TABLE TOP (OFFICE)Providing table top of required size fixed at a standard table top height of upto750mm min (including table top thickness). Table top shall be made of 25mm thick Marine ply(IS 710 : 2010), FIRE RETARDENT laminate on unexposed face. All edges of the work surface shall be provided with machine pressed PVC edge banding of 2mm thickness etc. complete. Table top to be principally mounted from the partition frame with suitable MS powder coated brackets which should be integrated into the partition frame etc.complete. Execution of this item should be make as per the instructions of Achitect in Charge. Accessories Key Board Tray -. Size: - Width: 600mm, Depth: 270, Height: 70mm keyboard pullout tray made up of durable ABS (Acrylonitrile Butadiene Styrene) material provide with sliding telescopic channels. The tray hanged below the top by steel MS brackets. Finish: All steel components should be epoxy powder coated after seven tanks anti corrosion pre-treatment of surface. ABS wire managers to be provided where required forthe table top. CPU Trolley: Size: - Width: 180mm Depth: 245mm, Height: 210mm Made up of press formed MS CR sheetFinish provision for height & width adjustment. All steel components should be epoxy powder coated after seven tanks anti corrosion pre treatment of surface. (Coating thickness50 to 60 micron complete as per architect design & approval

MODULAR STORAGE CUPBOARDS Providing and supplying Modular CUPBOARD made up of required size. Top made of 25mm Marine ply (IS 710 : 2010), having post formed decorative laminate of 0.8mm on top and FIRE RETARDENT laminate on all sides / surfaces etc.complete. Sides, Sides in 25mm thk Marine ply (IS 710 : 2010). Adjustable shelf made in 25mm thk Marine ply (IS 710 : 2010) placed on standard shelf pins etc. complete. Storage Back made of 9mm thick Marine ply (IS 710 : 2010)etc. Sides, Shutters, Bottom, adjustable shelf, finished 2mm thick machine pressed PVC Edge banding of required size etc. Hardware set to include 110 degree opening self- closing box hinges, Counter Sunk screw, S.S.Brush Finished, Handles L’ Clips Selves support etc. complete. Multipurpose lock, Levelling Bolt with inserts etc. complete. Aluminium furniture feet – Round tube, diameter 40 mm with 100 mm height with suitable finish to match handles’' Shape SS Brush finished handles as indicated in the drawing, suitable locking provision etc. complete as per architect design & approval

Aluminium glass partition- DEMOUNTABLE ALUMINIUM GLASS PARTITION - TYPE 1 Supply and instalaation of Demountable Modular Aluminium Frame Glass Partition, Singlre glazed system compromising of 10mm Toughnend Glass and Aluminium profile Sections of size75MM x 30MM for fixing at Floor level and at false ceiling level with approximate brackets and expansion bolts of standardised S.S. Finish. All Hardware made of standardised S.S. finish etc. complete. The Profile features and double sided adhesive tape guarantees perfect structural union and sound insulation. Finishes exposed aluminium sections are anodized aluminium finish with 6463 T6 Grade. The Quantity for this item will be theglass panel of height 2100MM only complete as per architect design & approval

Low ht. ply partion for work station- Medium Height Partition @ 1800/1200HT TILE BASED PARTITION SYSTEM Tile based Aluminum partition system of 1800/1200mm ht. made of 60mm thick aluminum frames having two separate race ways for laying electrical & computer wiring. The wire management shall be through to the race way to be fitted at bottom of partition other immediately below of work top with hook on type raceway cover for easy access of wires. Frames to be joined by aluminum connectors with M6 x 16 pan-head machine screw and washer with aluminum post cover. Post cover snap on fashion to be connected on aluminum connector visible aluminium to be in anodized / powdercoated finish. The top exposed sides of the frame and posts should be covered with horizontal/ Vertical trim and caps made of Aluminum in anodized / powdercoated finish in order to enhance its look.Upper tiles on the partition to be in Soft Board or Marker or prelaminated partical board tile of 9mm. thk., prelaminated partical board lower tiles in laminate finish 9mm. thk. on both the sides .Size :- 1200/1800mm (H) complete as per architect design & approval

ROLLER BLINDS - COLOUR BACKING- Providing & fixing premium quality Roller blinds with prestress Solar protection fabric of high tenacity PolyesterYarn with PVC coating and fungi static treatment and should block the light flux & offer elimination of glare and sunlight /radiance etc. complete. Fabric shall have visiblelight & solar properties & greengaurd (gold) Indoor Air quality & children & school certified. Fabric composition - 39% Polyester / 61% PVC with alumium backing. Weight - 290 g/sq.m (+/- 5%) Thickness - 0.32 mm (+/- 5%) Fabric openness factor - 3% Tensile strength (warp / weft) - 160/170 daN/5cm Tearing Strength (warp/weft) - 11/13 daN Backing - Aluminium backing. Fungi static treatment - Degree 0 Excellent (EN ISO 846- A) Fire retardancy: B-s2,d0/EN 13501-1, class A/ASTM E84 complete as per architect design & approval

Lader -Alluminium foldable ladder for store Providing & Fixing Foldable Alluminum Ladder 1500 mm. Ht. complete as per architect design & approval

Lockers-Multiple Compartment Lockers @ 1140Lx 457D x 1830 mm. Ht. Providing and fixing Multiple Compartment Lockers @ 1140Lx 457D x 1830 mm. Ht. with 12 Compartments , Complete body & shutter made of CRCA Sheet with powder coated finishcomplete as per architect design & approval

Public Seating Chair - 3 Seater: Providing and Fixing 3 seater Public seating chair made of complete metal with Legs in Crome finish and seates in silver powder coating finish complete as per architect design & approval

Providing and Fixing stackable chairs with supportive armrests in premium virgin plastic material with superior durability and a lightweight design for portability and long- lasting use complete as per architect design & approval.- Nilkamal Platinum Plastic Arm Chair or Equivalent

Excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.50 m) By Mechanical Means

Suppying and fixing vertical / roller blinds on windows made out of imported fibrics and rollers with level for rotic movement and stairing for side movement fitted in matching powder coated aluminium channel fixed in mannar tio insure smooth operation as per Architect.s drawing and make approved as Directed by Engineer-in-charge etc.complete.

Providing and laying Cast in situ/Ready Mixcement concrete in M20 of trap/ granite/quartzite/gneiss metal for steps including steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface, only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually , striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete.

Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete.

Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete.

Providing random rubble masonry first sort of trap / granite / quartzite / gneiss /jamba stones in cement mortar 1:6 in external walls of plinth including bailing out water manually , racking out joints when pointing is to be done and striking joints from inside including watering etc.complete.

Providing tuck pointing with cement mortar 1:3 for stone/Brick masonry including scaffolding and curing etc. complete.

Providing and laying machine cut machine Polished Kota stone flooring 25mm to 30mm thick and required width in plain/ diamond pattern on bed of 1:6 C. M. including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete.

Providing and laying Rough Shahabad Stone Flooring 25mm to 30mm thick and of required width in plain/ diamond pattern on a bed of 1:6 C.M. including cement float, striking joints, pointing in cement mortar 1:3 curing and cleaning etc. complete.

Providing and laying Polished Tandur Stone flooring 25mm to 30mm thick required width in plain/ diamond pattern on a bed of 1:6 C.M. including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete.

Providing and fixing heavy duty inter locking concrete Coloured paving blocks of 80 mm thickness of having a strength of 300 Kilogram/Sq.cm. of approved quality and shape on a bed of crushed sand of 25 to 30 mm thick including skirting joints and cleaning etc. complete

Providing and Laying factory made coloured chamfered edge Cement concrete grass paver blocks of required strength,thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of fine fine aggregate (natural sand/crushed sand VSI grade finely washed etc.), compacting and proper embedding/laying of inter locking paver blocks into the fine aggregate (natural sand/crushed sand VSI grade finely washed etc.) bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine aggregate (natural sand/crushed sand VSI grade finely washed etc.) and cutting of paver blocks as per required size and pattern, finishing and sweeping extra fine aggregate (natural sand/crushed sand VSI grade finely washed etc.) and complete as per manufacturer spsecifications & direction of Engineer-in-Charge. 60mm thick CC paver block of M-35 grade concrete with approved colour and design & pattern.

Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. complete.

Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C.coping to plinth or parapet and sill of doors and windows moulded as per detailed drawings or chamfered as approved by the Engineer including steel centering, formwork, cover blocks, laying/pumping, compacting , curing , finishing and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Providing and laying Hyperplas Aluminium or equivalent polymeric multiple monolithic five layer water proofing flexible, pliable and high tensile strength membrane (3 Kilogram/ One Square Metre) which is comprise of top with "V" shape embossed 40 micron Aluminium foil to bear thermal expansion and avoiding delamination & consist of centre core of 90 micron thick High Molecular High density Polyethylene film (HMHDPE) which is protected on both the side with polymeric mix. Applying the membrane by thermofusing to roof & parapet after applying thin film of hot blown bitumen 85/25 or 90/15 grade @ 1.2 Kilogram/ One Square Metre maximum as per surface condition or Hyperplas primer @ 250 gms/ One Square Metre as per site condition on the surface to be treated with 10 cm overlapping including finishing etc. complete and covering guarantee of 7 years on stamp paper of Rs. 100/- and as directed by Engineer-in-charge. (Prior permission of S.E.in writing is necessary before inclusion of this item in estimate).

Supplying, filling, spreading & leveling coarse fine aggregate (crushed sand VSI grade finely washed etc.) of size range 1.5mm to 2mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer in charge.

Supplying and erecting integrated LED flood light fitting Max. 100W IP65 & IK07 class having pressure die-cast aluminium housing, having system lumens output of Min. 12000 Lumens, min. efficacy of 120 lumen/W, CRI>70, CCT upto 6500K, THD<10%, p.f. >0.90, operating range of 140- 270V, inbuilt surge protection of 4 kV, Life class of 50,000 Hrs. at L70B50, including driver with U shaped bracket with 3 Years warranty as per specification No FG-ODF/FLS2.

Supplying and erecting integrated LED Bollard Cylindrical/Cubical shaped 800mm 8W IP65 & IK10 class having extrusion aluminium housing with polycarbonate diffuser, having system lumens output of Min. 800 Lumens, min. efficacy of 100 lumen/W, CRI>80, CCT upto 6500K, THD<10%, p.f. >0.90, operating range of 140-240V, inbuilt surge protection of 2 kV, Life class of 25,000 Hrs. at L50B50, including driver complete with 2 Year warranty as per specification No FG-ODF/FLS2.

Supplying and erecting Concealed type foot/step light Max. 5W having IP67. IK10 rated Pressure die cast housing having system lumens output of Min. 500 Lumens, min. efficacy of 100 lumen/W, CRI>80, CCT upto 5000K, Beam Angle of 110 deg., THD<10%, SDCM<5, p.f. >0.95, operating range of 230-270V, surge protection of 2.5 kV, Life class of 25,000 Hrs. at L70B50, including driver by making necessary arrangement/recess in wall to make it flush with surface with 2 Year warranty.

Supplying & erecting integral post top lantern fixtures (light house type) suitable upto LED 18 W Lamp consisting of combination of spun aluminium canopy & clear acrylic top cover, cast aluminium

Supplying & erecting 3 mtr long Post Top Pole ,bottom section 114.3 X 600 mm Top section 76.1X 24000 mm Base Plate 220X200X10 mm

Providing and fixing the Experience Centre for Chanakya Museum with mentioned installations. The total dimension of the space covered will be the second o or passage (approx 24 ft X 120 ft) including bridge between Main Block 2 and 3. The Installations will include sculptures (made of mixed materials including Fibreglass, Wood, 3D Printing Materials and Glass), kiosks, panels, and technological interventions such as touch screens, projectors and sensors. The costs provided include site visits (upto 5 / 6 times) and x ing for all the interactive and static installations.

Providing and fixing of GRC elements at various location and height including structural steel supports, fixtures as per requirements, scaffolding, transportation, loading & unloading, water & electricity as per the given drawings and refeernce images for the below all GFRC given items. Making of GFRC architectural element 'Chaitya window' as per given drawing. Size is 7460mm width X 4915mm height X 230mm thickness.

Making of GFRC architectural element 'vedika' railing as per given drawing with 1000mm height Thickness of vedika 75 mm

Making of GFRC architectural element 'perforated wall' Jali Wall- Trellis as per given drawing. Size is 3000mm width X 4500mm height X 200 thickness

Making of GFRC architectural element 'Wall Mural' as per given drawing. Size is 3290mm X 5285mm.

Making of GFRC architectural element 'Window Chhaja & Ext. Frame' as per given drawing. Size is 2050mm X 1500mm

Making of GFRC architectural element 'Brackets' as per given drawing. Size is 600mm X 600mm.

Making of GFRC architectural element 'Chaitya frame cornice' as per given drawing. Size is 1200mm width X 1000mm height.

Making of GFRC architectural element 'wall moulding' as per given drawing. Size is 1412mm width X 175mm X 1925mm height.

Making of GFRC architectural element 'Stambha' as per given drawing. Size is 6000mm height including capital and base.

Making of GFRC architectural element 'Water Fountain' as per given drawing. Size is

Making of GRC architectural element 'Pilaster' as per given drawing. Size is 300x75x3000

Making of GFRC architectural element 'Entrance Gate Pillars' as per given drawing. Size is 230mm X 230mm on either side and 3000mm length.

Making of GFRC architectural element 'Entrance Gate Vault' as per given drawing. Size is 2630mm height and 3035mm length.

Making of GFRC architectural element 'Window Chhajja and Ext. Frame' as per given drawing. Size is 1425mm width X 2095mm length.

Transplantation of trees below 2' girth at same location. Transplanting of tree by minimum pruning of tree as directed by Site incharge / supervisor, dispose off the tree cutting, wood logs out of BMC Jurisdiction at designated site. application of rooting harmone in root zone , Watering of root zone, removal of tree along with rootstock alongwith the rootball, Providing and fixing of jute fabrics around rootball, tranportation of trrees at designated site. Digging of sufficient size pit, Feeling of pit by RHE and CDM in 2:1 proportion. Watering of soil mixture . application of rooting harmone in root zone , Planting of tree in a pit, watering daily as directed by site incharge.

Transplantation of trees having girth between 2' to 5' at same location.Transplanting of tree by minimum pruning of tree as directed by Site incharge / supervisor, dispose off the tree cutting, wood logs out of BMC Jurisdiction at designated site. application of rooting harmone in root zone , Watering of root zone, removal of tree along with rootstock alongwith the rootball, Providing and fixing of jute fabrics around rootball, transportation of trees at designated site. Digging of sufficient size pit, Feeling of pit by RHE and CDM in 2:1 proportion. Watering of soil mixture . application of rooting hormone in root zone , Planting of tree in a pit, watering daily as directed by site incharge.

Providing and fixing of Acharya Chanakya with given references by the Architect. Making of clay model, mould and casted bronze model statue executed of Acharya Chankaya in standing pose as per reference image provided and in true facial feature and posture in bronze metal oxidized finish. Size of the statue is 2700mm approximately in height without pedestal. From the clay model the statue will be be casted in Bronze. There will be internal reinforcement for support and stability. The thickness of the the casted bronze component of the statue will be ranging from 16mm to 18mm depending on design. The Bronze metal alloy composition will be 85% copper, 5% zinc, 5% zinc, 5% tin, 5% lead. Material Test Certificate will be included in this quote. The weight of the statue will be approximately 1200 kilograms. Fixing Details: Fixing with high quality exterior grade Stainless Steel anchor fasteners of "Hilti Brand" will be used to fix the statue on the pedestal. Thickness of SS anchor bolts will be around 300mm length and around 12mm in diameter each and will be used according to requirment. A minimum of four (4) bolts will be used or more will be decided on design. There will be a 12mm- 15mm thick bronze steel plate which will be casted along with the statue at the base of the statue to bolster it. Buffing, polishing, finishing and PU weather coating and oxidization of the bust. Transportation, loading and unloading charges.

Designing, Providing, installation of Bio STP of capacity 20 KLD for the project including all consumables, civil works, transportation, loading & unloading, testing, commessioning, within battery limits for 5 years and as per the below details. Segregation Chamber: 1m3 (1m x 1m x 1m) Oil & Grease Trap: 1m3 (1m x 1m x 1m), 60 KL DRDO MK 2 CERTIFIED Bio Digester, Tank: 6.7m×6m×1.5m, 20 KL Reed Bed : 5m×4m×1m, 20 KL DRDO AMI Bacteria (30% of BD Tank)

Supplying on site fresh Garden soil (i. e. 3 part soil) (free from stones rubbish like dried grass roots, other such materials) for excavated pit size area of 0.60 x 0.60 x 0.60m ( consolidated thickness).(As per P&G DSR 2022-23 Items of garden work,Sr No.44a)

Supplying on site well decomposed Farm Yard Manure FYM (i. e. 1 part FYM) for excavated pit size area of 0.60 x 0.60 x 0.60m (consolidated thickness).(As per P&G DSR 2022-23 Items of garden work,Sr No.44b)

Providing on site required variety of Tree (free from weeds /diesease etc.) 30 cms. apart c/c.Name:- Bahava;Bag Size 13 x13'', ht 6-8'(plants list sr no1,item no 5 B)

Excavation pit size 0.60 x 0.60 x 0.60m for planting small & medium ornamental plants/ large flowering/ shady trees (plant height 1 to 2 mtr.)/ palm varieties upto height 1 to 2 mtrs. in earth, soil of all types, soft murum, including removing the excavated & unwanted material up to a required distance of 50 mtrs. (As per P&G DSR 2022-23 Items of garden work,Sr No.11)

Filling fresh garden soil / silt & manure in excavated pit size area of 0.60 x 0.60 x 0.60m (1/10 of unskilled labour)(As per P&G DSR 2022-23 Items of garden work,Sr No.21)

Mixing garden soil/silt & manure thoroughly well, watering previous night. Planting required plant species as directed etc. complete for required pit size 0.60 x 0.60 x 0.60m. (1/10 of semiskilled labour) (As per P&G DSR 2022-23 Items of garden work,Sr No.26)

Maintenance of Newly Planted tree varieties having height 1mtr. - 2mtr. For First 30 days Only (As per P&G DSR 2022-23 Items of garden work,Sr No.34)

Supplying on site fresh Garden soil (free from stones rubbish like dried grass roots, other such materials) for excavation area of depth of 20 cms.( consolidated thickness).(As per P&G DSR 2022-23 Items of garden work,Sr No.38a)

Supplying on site well decomposed Farmyard Manure for excavation area of depth of 20 cms. (consolidated thickness).(As per P&G DSR 2022-23 Items of garden work,Sr No.38b)

Excavation for planting lawn/ shrub/ flower bed/ hedges/ edges/ canna bed in earth, soil of all types, soft murum, including removing the excavated material up to a distance of 50 mtrs. for a depth of 20 cms.(As per P&G DSR 2022-23 Items of garden work,Sr No.5)

Filling fresh garden soil / silt & manure in excavated area of depth 20cms. (As per P&G DSR 2022-23 Items of garden work,Sr No.15)

Mixing garden soil/silt & manure thoroughly well, watering previous night. Planting required plant species; lawn grass as directed etc. complete for required depth 20 cms. for planting lawn/ shrub/ flower bed/ hedges/ edges/ canna bed/ ground cover. (1/10 of semiskilled labour)(As per P&G DSR 2022- 23 Items of garden work. Sr No.23)

Supplying on site fresh Garden soil (free from stones rubbish like dried grass roots, other such materials) for excavation area of depth of 30 cms. (consolidated thickness).(As per P&G DSR 2022-23 Items of garden work,Sr No.36a)

Supplying on site well decomposed Farmyard Manure for excavation area of depth of 30 cms. (consolidated thickness) (As per P&G DSR 2022-23 Items of garden work,Sr No.36b)

Providing on site required variety of Shrubs (free from weeds /diesease etc.) 30 cms. apart c/c.Name:- Murraya(Kamini);Bag Size 7'' x 8'',(plants list) 1(a) serial no 15.

Excavation for planting lawn/ shrub/ flower bed/ hedges/ edges/ canna bed in earth, soil of all types, soft murum, including removing the excavated material up to a distance of 50 mtrs. for a depth of 30 cms.(As per P&G DSR 2022-23 Items of garden work,Sr No.3)

Filling fresh garden soil / silt & manure in excavated area of depth 30cms. (1/10 of unskilled labour) (As per P&G DSR 2022-23 Items of garden work,Sr No.13)

Mixing garden soil/silt & manure thoroughly well, watering previous night. Planting reqired plant species, lawn grass as directed etc. complete for required depth 30 cms. for planting lawn/ shrub/ flower bed/ hedges/ edges/ canna bed/ ground cover. (1/10 of semiskilled labour)(As per P&G DSR 2022- 23 Items of garden work,Sr No.23)

Maintenance of Newly Developed Shrubs Area. For First 30 days Only (As per P&G DSR 2022-23 Items of garden work,Sr No.31)

Providing and Fixing , Installation of Drip and Sprinkler Irrigation system in gardens having area Up to 1000 Sq. Mtr. To 3000 Sq Mtr.Incudes drips, Sprinkler, Filters, Pipes with 3 year warranty Excluding Pumping Unit

Providing and Fixing Processed Stone Cladding on wall surface/ plywood surface. RCC pardi/ Wall and all type of Interior, Exterior Compound wall and Gate etc. of cladding processed stone with material of Processed clay, Wooden chips, Silica sand, Cement, GFRC admixtures, Colour pigments, Fiber up to thick of 230 mm/ 25 mm including scaffolding, fixing of screw, etc. (As directed by Engineer in Charge)

Supplying and erecting rolled steel joist (girder) pole 100 x 116 mm (23 kg/m) with base plate in provided foundation as per specification no. OH-PL/RSJ

Providing and applying 2 coats of 100% Pure acrylic low VOC and APEO & HCHO free water based paint of approved colour that belongs to class 1 flame spread resistance of approved make Paint should provide durable and long lasting silk finish with a high crack tolerance of upto 1mm. Paint should have an oustanding washability with high resistance to wide range of bacteria and fungus. Paint has to be applied on smooth and uniform surface prepared by an acrylic copolymer low VOC & Odour putty. This surface should be primed with water based low VOC Primer. The work activity should cover all aspects of applying paints from surface preparation as directed by Engineer in charge.

Providing and fixing Slim Single Piece Concealed Cistern Body (Front or Top Actuation) with Floor Mounting Frame, Installation Kit and “S-Type” Drain Pipe Connection Set for Wall Hung WC with Flush Control Plate with pipes complete as directed by engineer in charge complete

Providing, laying and fixing in position cladding with stone of required height, length, thickness of 50mm -230 mm on wall with approved stone material, chemical material carting, dressing, fitting etc. complete as per detailed drawing and as directed by Engineer in Charge

Providing, laying and fixing in position flooring with stone of required height, length, thickness of 50mm -230 mm with approved stone material, chemical material carting, dressing, fitting etc. complete as per detailed drawing and as directed by Engineer in Charge

Providing & fixing Acrylic UV solid surface sheet of approved make, colur and finishe with fixing on existing base surface with adhesive and finshing with buffing to make surface smooth, corners round etc as directed by engineer incharge.

Providing ,fixing & supplying 4 mm thick designer palliate sheet of approved make for fixing as directed by engineer incharge.

Providing ,fixing & supplying ply 19 mm thick & fixing as directed by engineer incharge.

Providing ,fixing & supplying ply 12 mm thick & fixing as directed by engineer incharge.

Providing ,fixing & supplying ply 8 mm thick & fixing as directed by engineer incharge.

Providing ,fixing & supplying 1 mm thick color laminate of premium make for fixing as directed by engineer incharge.

Sliding Window- 3 Track (2 Glass shutter + 1 flymesh) of approved make with DGU, providing and fixing of Sliding Window- 3 Track (2 Glass shutter + 1 flymesh ). For details refer to Specifications. As directed by Engineer in charge.

Providing and fixing in position Panelling for Door and windows jam's made up of 19mm thick waterproof plywood of approved quality make (Century, Commander, Biz,etc.) for sides and exposed parts are finished applied with formica of approved shade sticked with approved quality glue of Fevicol make and abrotape including nails, screws,complete as per detailed drawings and as directed by Engineer in Charge

Providing and fixing Wooden Photo frames on wall including screwing, Prints on imported make canvas with matt finishing having wooden moulding to the sides of frames minium 35 mm thick with glossy / matt 4 mm Glass and artistic finish photo picture chosen by Engineer in Charge

Providing and fixing in position Reception / meeting hall table made up of 3mm to 19 mm thick waterproof plywood make ( Century, Commander, Biz etc) for sides and table top and internal surfaces finished with Formica approved make as directed by the Engineer in charge including decorative mouilding in required position drawer slider ( decorative channel make of solo, polo and such other company) knob, handles required multipurpose lock complete as per detailed drawings and as directed.)

Providing & fixing mural with art work in Fibre Reinforced Plastic material with 25 mm to 300 mm minimum embossed made up of rooflight resin and fibre glass including clay modelling, moulding & casting as per design & drawing etc. complete.

Providing & fixing mosaic tile for water body wall & floor in designer pattern including adhesive, cement float, filling joints, with neat cement slurry, Natural sand, curing and cleaning complete. with prior approval of concerned Superitending Engineer.

Chemical waterproofing on terrace / bathroom by cleaning the surface and made free of dirt, foreign particles via mechanical grinding using appropriate equipment, identifying and sealing the Surface Cracks and Concrete Slab Panel Joints & penetrations, Cutting and opening the Cold Joints of the slab with suitable cutter machine in "v" groove and filling with moisture triggered single component polyurethane based Sealant. Providing and applying waterproofing chemical membrane on horizontal and vertical face over primed surface using roof surfaces including parapet walls upto spring bottom, including pedestals, upstands and all utilities available at roof. Waterproofing membrane should be applied post application of Primer. Polymer modified mortar should be used for surface preparation for damaged area as per requirement. Fibre mesh should be applied on joints as per requirement as directed by engineer in charge.

Providing & Fixing Designer 10mm to 30mm thick artificial Stamping such as natural Stone/Bricks/Wooden surface having UV resistance colours with water repellent qualities,fire resistance,one piece application with Number joints,light weight material resist on hot and cold climate as per cladding design ,providing onplaster surface,Filling joint with colour Adhesive & making Surface treatment by glossy/matt lacrecoat,smoothning,and finishing it on proper level as directed by engineer in charge.

Supplying and installing Office Signages Glass/SS with Vinyl as per Rooms cabin as per architects drawing and approved as Directed by Engineer-in-charge etccomplete.

Antitermite Treatment of Floors - Providing, laying and applying Integrated Termite Exclusion Method - Anti-termite system Installation and Chemical application including laying of LLDP dripper pipe of 8 mm OD and 6.4 mm ID with built-in pressure compensation chip at every 0.30-meter interval on the pipe installed at a depth of 25 to 40 mm under the floor icluding excavating tranches and securing the pipes whith P Clips and cement mixtures and backfilling the same with good quality material. Pipe network loops are to be terminated in Junction box height of which will be maximum 1 ft from finished floor level. Pouring the antitermite chemical from Bayer or eqivalent make with the help of pressure pumps with working pressure of 2 kg/cm2 at the rate of 3 liter/sqm or as specified by the make.

Provinding, Fixing and Making Artistic Texure Plaster of mixure of Dholpuri stone crystal material with Bubble Spray with Rough & ToughChemical Solvent on new Surfaces of 1.5mm Minimum Thickness with Appropriate Finishing, Colour and design approved by Engineer in Charge.

Providing and erecting pressure motor for increasing the pressure in plumbing line to get the uniform pressure at any trap at any level. The pressure range should be upto 4kg/cm2 and maximum HP of pressure motor upto 1.5HP, the motor should be of submersible type with make of Grunforce/Texmo/Proton with ISI mark.

Providing & fixing of Casement fixed window of approved make with DGU. The extruded aluminium sections of Alloy 6063 tolerances confirming to DIN standard from approved raw material V2 / V4 as directed by Engineer in charge.

Boring/drilling bore well of 300mm dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machinery required for the job, all complete as per direction of Engineer in charge, upto 90m depth below ground level.

Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well-casing pipe of 150mm dia, conforming to IS:12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per the direction of Engineer in charge.

Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well screen pipes with ribs of 100mm dia, conforming to IS:12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per the direction of Engineer in charge.

Providing & fixing vinyl self adhesive glass film from opaque white to full transparency while still allowing natural light to fill the room complete as directed by engineer in charge.

RWH - Shallow Percolation Pit providing, constructing 2.0m deep shallow depth percolation pit comprising of 1.0m dia pre-cast RCC rings, 300mm thick side filling around outside of RCC rings (annular space) with 40mm size boulders including filling of percolation pit up to 0.5m depth (from bottom up) with 25-75mm clean washed gravels followed by 0.5m depth of 10-25mm of clean washed stones followed by 0.5m of washed river fine aggregate (natural sand/crushed sand VSI grade finely washed etc.) including netlon mesh between each gravel/fine aggregate (natural sand/crushed sand VSI grade finely washed etc.) media layer including covering with RCC slab, manhole frame & cover, PVC rungs etc. including arrangement for inlet & outlet pipe, excavation & backfilling as shown in the drawing. The rate shall be inclusive of all labour, material, wastage, scaffolding, transportation, taxes, including all leads, lifts at all levels. All material should be of approved make. All works complete as per the drawing, technical specification and direction of the Engineer in charge

RWH - Recharge Pit Providing and constructing recharge pit of 2.0m deep and 1.0m dia of pre-cast RCC rings with 6.5" dia x 25m deep borewell at the floor of recharge pit including installation of combination of solid /perforated PVC casing pipe wrapped around with netlon mesh including 300mm thick sidefilling around outside of RCC rings (annular space) with 40mm size boulders including filling of recharge pit up to 0.5m depth with 25-75mm clean washed gravels from bottom up followed by0.5m depth of 10-25mm of clean washed stones followed by 0.5m of washed river fine aggregate (natural sand/crushed sand VSI grade finely washed etc.) including netlon mesh between each gravel/fine aggregate (natural and / crushed sand VSI grade finely washed etc.) media layer including covering with RCC slab, manhole frame & cover, PVC rungs, PVC end-caps, fittings etc. including arrangement for inlet & outlet pipe excavation & backfilling as shown in the drawing.The rate shall be inclusive of all labour, material, wastage, scaffolding, transportation, taxes, including all leads, lifts at all levels. All material should be of approved make. All works complete as per the drawing, technical specification and direction of the Engineer in charge.

Supplying, filling, spreading & leveling stone boulders of size range 5cm to 20cm in recharge pit, in the required thickness, for all leads & lifts, all complete as per the direction of Engineer-in-charge.

Supplying, filling, spreading & leveling gravels of size range 5mm to 10mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-incharge.

Supplying, filling, spreading & leveling coarse fine aggregate (natural sand/crushed sand VSI grade finely washed etc.) of size range 1.5mm to 2mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer in charge.

Gravel packing in tubewell construction in accordance with IS:4097, including providing gravel: fine/ medium/ coarse, in required grading & sizes as per the actual requirement, all complete as per direction of Engineer in charge.

Providing and laying artificial stone of 15 millimetre thick for door frame/ dado/ window boxing/ tread / riser etc. fixed jusing chemical adhesive of grade 2 including filling joints with polymer base filler nosing the sharp edges wherever necessary, curing, etc. complete.

Providing & applying damp guard to wall for prevent the fungus, algae and dampness etc. including preparaing the old damaged surface by scrapping to remove foreign matter and scaffolding if necessary etc. complete.

Side Rack made up of 3mm to 19mm thick waterproof plywood make (Century, Commander, Biz,etc.) for sides and table top and inner surfaces finished applied with Laminate of approved shade and sticked with approved quality glue of Fevicol including necessary sliding tracks along with sliding doors, cabrotape nails, screws,complete . Measurement shall be on elevation basis. as per detailed drawings and as directed by Engineer in Charge.

Fixing in position Storage 0.90mtr lenght, 1.2mtr height and 0.45mtr breadth made up of 18mm thick novapan Regular board melamine faced prelaminated partical board one side(12823 Gr.II, type II ) consisting of six compartments with shutter . Egdes sides and top stick with aminated to top, shutters with Fevicol of approved quality at the rate of 0.50 kg/sqm to formica and 0.20 kg\sqm to novapan, and nails, screws, handels, locks of godrej

Supplying, erecting, testing and commissioning 22KV HT metering cubical (compact type) approved by MSEDCL / licensee fabricated with 2 mm (14 SWG) M.S. sheets with supporting angle, painted with powder coating / epoxy paint of required shade, copper bus bar size 25 x 6 mm, heavy duty mechanical lock, with counter meter for measuring no. of times the opening of meter door, top side cover (CT, PT cover) interlock with meter door, epoxy casted 3 nos. CT having required ratio between 25/5A to 200/5A, VA 10 or 15, Class 0.2S, epoxy casted 3 nos. PT having ratio 22000/V3/110/V3 VA 50, Class 0.2 suitable for provided trivector meter, and provision for incoming and outgoing cables complete duly tested by licensee with necessary test certificates and erected on provided plinth/ cc foundation.

Supplying, installing, testing & commissioning 3 phase, 22/0.433 kV, 50 Hz., 630 kVA, Mineral oil immersed and naturally cooled outdoor type, Copper wound,without gas cushioning ,hermetically Sealed transformer, delta/star connected with additional neutral brought out on load side, temperature rise should not exceed 45℃ by thermometer in oil and 50℃ by the resistance method in winding at full load rating, using type A winding insulation (kraft paper) with HV tapping (with off load tap changer) off load +5 to - 10 in steps of 2.5%,having 7 number of tap positions with standard accessories complete with test certificate with losses below 1953 Watts at 50% load, 5565 Watts at 100% load as per IS:1180 (part 1) : 2014 with necessary permissions of Electrical Inspector, as per specification no SS- TR-SL.

Supplying , erecting & terminating XLPE insulated, galvanised steel formed wire armoured (strip) cable 22 kV(E), 3 x 185 sq. mm. aluminium conductor laid in provided trench / pipe as per specification no. CB-HT

Providing and erecting Heat shrinkable outdoor termination kit for 11 kV (UE)/ 22 kV ( E ) XLPE HT cable 3x120 to 185 sq. mm. with necessary material as per specification no. CB-JT/HT

Making trench in hard murum/Tar road having 0.9 m depth and minimum 0.3mtr width for laying provided cables of voltage range 3.3 kV to 11 kV complete as per specification No. CW-EXN-CTR

Supplying and erecting, 22 kV outdoor type drop out fuse with insulator complete with fuse holders, fuse barrel with metal fitting, fuse element mounted on M.S. channel with working current of 15A capacity complete erected on provided cross arm.

Supplying and erecting 22 kV outdoor type gang operated air break, triple pole switch 200 A capacity with 3 post pin type insulator per phase, mounted in horizontal or vertical position with necessary channels on provided cross arm with adequate length of "C" class G.l. pipe for operating handle erected on extended square shaft. The operating handle provided with lock and key at suitable height from ground level with necessary clamp.

Supplying and erecting distribution class, 22 kV thyrite type lightening arrester with nut bolts, on provided MS channel as per specification no. OH-INS/LA

Making cement concrete foundation including excavation (60 x 60) cm x deep 1/6 of pole length in 1:3:6 cement concrete 20 x 25 mm stone metal, 45 cm x 45cm x 45 cm /45 cm dia. x 45 cm. height plinth duly plastered, with necessary curing and finishing complete. (for above 9 m poles)

Supplying and erecting fencing of section having size 2450 mm in height from ground level and 1200 mm width with angle iron frame work erected in CC foundation and painted complete as per specification no SS-AS/FSG

Supplying and erecting 50 x 50 x 6 mm angle iron as corner support 2m long fixed at the middle of the fencing frame and the other side inclined at 30 degree angle, in cement concrete foundation of 15 x 15 x 40 cm complete duly painted with one coat of red oxide and two coats aluminium paint complete.

Supplying and erecting double leaf hinged door each 1500 mm in width x 1850 mm in height using B class, GI pipe with angle iron supports, chain link wire mesh (jali) complete supported on channel iron, erected in foundation, and painted complete as per specification no SS-AS/DLD

Supplying and spreading stone metal 25 mm size for 100 mm depth above the ground level complete.

Dismantling the existing distribution transformer of any capacity from the plinth / foundation safely without any damages.

SITC of 200 KVA, CPCB-IV+, Prime rated DG Set with Kirloskar make Engine (model: 6K1080ETA 4G2) coupled to Kirloskar make Alternator with inbuilt fuel tank of 400 ltrs with Sound Proof Acoustic Enclosure, & all standard accessories.

SITC of 100 KVA, CPCB-IV+, Prime rated DG Set with Kirloskar make Engine (model: 4K1080ETA 4G1) coupled to Kirloskar make Alternator with inbuilt fuel tank of 230 ltrs with Sound Proof Acoustic Enclosure, & all standard accessories.

Supplying, erecting, testing and commissioning of Microprocessor based Generator Control Unit (Synchronization panel) panel suitable for diesel generating set of 320 kVA capacity Three phase, 415 Volts, 50Hz A.C. with all standard features and safeties etc as per specification no. GEN-SYNC.

Making cement concrete foundation in 1:2:4 cement concrete with foundation bolts and nuts complete. (cost of wooden box is included) (for pumps).

Supplying, installing, testing and commissioning FR, XLPE armoured cable 4 core 1.5 sq.mm. copper conductor complete erected on wall/ ceiling complete as per specification no. CB-LT/CU

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 300 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½core 240 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating FR- XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 185 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 150 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 95 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating FR-XLPE armoured cable 3½ core 50 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB- LT/AL

Supplying, erecting & terminating FR-XLPE armoured cable 3½ core 25 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB- LT/AL

Supplying, erecting & terminating FR-XLPE insulated unarmoured cable 1100 V. 1 core 25 sq. mm. copper conductor complete erected with provided lugs, laid in provided control panel /distribution boards / pipe

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 16 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 10 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V,3 core 2.5 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V,4 core 4 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Supplying & laying (including excavation of suitable width & depth up to 90 cm} 75 mm outside dia double wall corrugated pipes [DWC] of HDPE for enclosing cable below ground/round surface to required depth complete.

Providng earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing & recording the results as per specification no. EA-EP

Providing earthing with copper earth plate size 60 x 60 x 0.315 cm with funnel with a wire mesh for watering and brick masonry block C.l. cover with minimum 25 kg Carbon based environment friendly back fill Ground Enhancing compound complete with all materials, testing & recording the results as per specification no ESE -LA

Supplying and erecting GI strip of required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint in an approved manner with joints required. As per specification no EA-EP.

Supplying and erecting copper strip of high purity required size used for earthing on wall and/or any other purpose with necessary copper clamps fixed on wall painted with bituminous paint with joints required. As per specification no. EAEP.

Supplying and erecting GI earth wire of high purity of different sizes used for earthing or any other purposes on wall with necessary G. I. Clamps fixed on wall/cable/ conduit with screws in an approved manner.

Providing printed instruction chart for treating persons suffering from electric shock, printed in English & Marathi and duly laminated complete.

Supplying and fixing PVC synthetic elastomer electrically insulating mat with class A insulation conforming to IS: 15652 – 2006 having 2 mm thickness up to 3.3 kV

Providing pair of duly tested rubber hand gloves as per IS :47705 suitable for working up to 22 kV supply complete.

Supplying standard first aid box with necessary antiseptic cream, medicine for use on wounds due burn, crepe bandage, gauge bandage, medicated ready to use bandage (Band-Aid) adhesive tape for medicinal use, scissors, anti- septic solution,etc. (All above contents shall be of standard makes)

Supplying and erecting fire resistant mortar (20 kg) with fire resistance class S90 as per National Electrical Code (NEC) SP30-2011 suitable to seal the openings of all kinds of cables, pipes and cable support system in steel, aluminium and plastic profiles ( except hollow core conductors). The residual openings shall be closed with filler, as per specification no FF-FRM.

Supplying shock proof leather safety shoes of electrical grade of standard size as IS :11226, 14544 duly tested, with necessary test certificate from manufacturer.

Supplying, installing, testing and commissioning of 25 kWp ON-GRID Solar PV System / Plant consisting Solar PV Poly Crystalline Panel (335 Wp X 75 Nos.) and Solar ON- GRID Inverter of similar capacity (THD<3%) with interconnecting wires / cables up to solar ON GRID inverter, proper base plate, canopy box to house Inverter and necessary accessories i.e. ACDB/ DCDB, MCB etc. wiring up to solar Inverter in casing and capping, display board, sign board, two distinct earthing, lightning arrester, liaisoning charges, remote monitoring system with maintaining card / chip for 5 years including net charges for RMS System, complete up to net meter installation and export to the grid with 5 year ON-SITE warranty and fully comprehensive maintenance contract as per Specification no. ESD-RT-ONG.

Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted / bolted / welded connections without connecting plates, braces etc. and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete.

Supplying, installation & marking of surge arrestor / surge protection device at the main distribution board after the incoming breaker of type 1+2 tested for Imax 100 kA for three phase and neutral with compliance to IEC 61643-11 as per specification no. CP-SPD

Supplying, erecting & terminating XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 50 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Making cement concrete foundation in 1:3:6 cement concrete, (20 to 25) mm. stone metal duly plastered with necessary curing for complete. (pole muffing or any other purpose).

Supplying and erecting LED square / circular 9 to 12W down lighter having pressure die-cast aluminium housing, opal translucent cover, mounting arrangement with board for surface type or spring loaded mounting clips for flush type complete.

Supplying and erecting LED square / circular Max. 18 W down lighter/ Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 2000 Lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty.

Supplying and erecting LED Panel Light(600mm X 600mm) Max. 35 W having CRCA powder coated housing, polystyrene diffuser having system lumens output of Min 4200 Lumens, min. efficacy of 120 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50 including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty.

Supplying & erecting inverter LED batten 20W tube light fitting with polycarbonate housing, heat sink, integrated HF electronic driver, Min. 2600 mAh Lithium ion Battery with charging time of 8-10 Hours and backup time of Min. 3 hrs. with minimum 25% of initial Watts having luminous efficacy of 100 lumen/watt, CRI>80, CCT of 6500K and THD<=20% having useful life of minimum 25000 hrs. with overheating protection with 2 years warranty.

Supplying and erecting bulk head LED fitting max. 10W with high transitivity diffuser with system lumens output of min. 1100 lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., THD<10%, p.f. >0.95, operating range of 140-260V, in built surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, IP66, IK09 rated on provided PVC Block / wooden board with 3 years warranty.

Supplying & erecting Pathway light 9W IP67 LED Fittings suitable for down light & walkover both indoor & outdoor apllication. Miniature form, SS body, Scratch resistance glass & special optics.

Supplying LED concealed type foot / step light with aluminium body for indoor / outdoor application suitable for 4W - 6W LED including driver and erecting by making necessary arrangement / recess in wall to make it flush with surface with minimum 1 year warranty as per specification No. FG-IDF/LED.

Supplying and erecting fresh air cum exhaust fan of light duty 250 V A.C. 50 cycles 225mm. 1400 RPM rust proof body & blades, wire mesh, duly erected,complete.

Making suitable size recess in any type of false ceiling for erection of flush type down lighter and finishing the background to match the original surface upto 20W. Design,fabrication,assembling,supply,installation,testing and commissioning of cubicle type LT panels suitable for Outdoor Type 415 V 3 phase ,4 wire 50 Hz AC supply system fabricated in compartmentised design from CRCA sheet steel of 2 mm thick for frame work IP 52 and covers,3 mm thick for gland plates i/c cleaning and finishing complete 9 tank process for powder coating in approved shade RAL 7032, extendable type TPN aluminium alloy busbars of high conductivity,DMC/SMC busbar supports,with bottom base channel of MS section not less than 75mm X 50 mm X 5 mm thick,entire panel shall have a common copper earthbar of required size at the rear with 2 nos earth studs,solid connection from main busbar to switchgears with require size of aluminium busbar & control wiring with 2.5sqmm FRLS insulated copper conductor cable ,cable alleys ,cable gland plates i/c accessrories as per specification and providing switchgears, metering instruments etc. for follwing panels Supplying and erecting metal work in CRCA sheet (16 guage) with fabrication of boxes, panel boards, etc. including cutting, bending, drilling, welding, riveting, treated with anti-rust treatment and duly powder coated or painted with one coat of red lead paint and 2 coats of enamel paint complete.

Supplying, installation & marking of surge arrestor/ surge protection device at the main distribution board after the incoming breaker of type 1+2 tested for Imax 50 kA for three phase and neutral with compliance to IEC 61643-11 as per specification no. CP-SPD

Supplying & erecting LED type indicating pilot lamp with LED colours red /yellow / green, 230 / 250V on provided box / panel with necessary material,wiring & connections etc.

Supplying & erecting LED type indicating pilot lamp with LED colour blue, 230 / 250 V on provided box / panel with necessary material, wiring & connections etc.

Supplying, erecting & marking SPMCB 6A to 32A, C- series with rated short -circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW- SWR/MCB

Supplying, installing, testing and commissioning air circuit breaker manual drawout type, 650V, 1250A rated at 50º C without deration, 12kV Impulse, 4 pole (100% Neutral Protection) 50 kA (Ics=Icu=Icw for 1s),with standard accessories with ready to close, individual fault trip, alarm and trip indications, mechanical and electrical anti pumping, soft/hard rating plug (including hard rating plug CT) with Micro-processer based LCD display release with LSIG and temperature rise protection & with 4 C/O contacts for On- Off-Trip indication, min. 5 event and trip history on breaker display on provided iron frame as per specification no. SW- SWR/ACBNote:- 1) For use of 4 pole MCCBs in place of 3 pole MCCBs add 20% in rate of 3 pole MCCB. Note: For electrical drawout type ACB for item no from 5- 8-5 to 5-8-8 increase rates by 15%

Supplying and erecting LT current transformer with bar primary 50/5 to 1000/5 ratio with 15 VA burden erected in provided CRCA box duly secured with insulating materials connected to the meter with test certificates.

Supplying and erecting of any size electrolyte aluminium patti or bar in bus bar chamber / in panel or any other purpose, 500 V with require capacity with 99.9% aluminium purity with fixing arrangement (like lug or bottle type lug) to both the end with high grade polyolefin insulation sleeve complete as per specification no. BCPBB

Supplying and erecting AC Three Phase Four wire Multifunction Energy Meter of Rating 10 - 60A, Class 1.0 with din rail / Panel mounting to measures and display parameters with RS485 Modbus communication port. mounting whole current operated meter to measures and display V, I, kWh, KVAh, KW, KVA, P.F, THD, RS 485 Communication port. Electrical parameters shall be available on com port with their mapping address open for third party software

Supplying and erecting panel mounting type digital ammeter having three and half digit LED display, external CT operated, calibrated for suitable to operate on 500V, 0 to 1000A having accuracy class of 0.5, AC supply with necessary PVC wire leads and lugs and mounting hardware on provided panel complete with calibration certificate from manufacturer.

Supplying and erecting panel mounting type digital voltmeter having three and half digit LED display, calibrated for 0 to 750V AC suitable to operate on 500V having accuracy class of 0.5 ,AC supply with necessary PVC wire leads and lugs and mounting hardware on provided panel complete with calibration certificate from manufacturer.

Outgoing, Supplying, installation & marking of surge arrestor/ surge protection device at the main distribution board after the incoming breaker of type 1+2 tested for Imax 50 kA for three phase and neutral with compliance to IEC 61643-11 as per specification no. CP-SPD

Supplying & erecting LED type indicating pilot lamp with LED colours red /yellow / green, 230 / 250V on provided box / panel with necessary material,wiring & connections etc.

Supplying & erecting LED type indicating pilot lamp with LED colour blue, 230 / 250 V on provided box / panel with necessary material, wiring & connections etc.

Supplying, erecting & marking SPMCB 6A to 32A, C- series with rated short -circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW- SWR/MCB

Providing & erecting 3 Pole MCCB 415V, 630A, rated short-circuit breaking capacity 36 kA (Ics=100% of Icu), adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact and MCCB should have phase barriers both sides, with insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification no. SW-SWR/MCCB Note:- 1) For use of 4 pole MCCBs in place of 3 pole MCCBs add 20% in rate of 3 pole MCCB.

Supplying and erecting LT current transformer with bar primary 50/5 to 1000/5 ratio with 15 VA burden erected in provided CRCA box duly secured with insulating materials connected to the meter with test certificates.

Supplying and erecting of any size electrolyte aluminium patti or bar in bus bar chamber / in panel or any other purpose, 500 V with require capacity with 99.9% aluminium purity with fixing arrangement (like lug or bottle type lug) to both the end with high grade polyolefin insulation sleeve complete as per specification no. BCPBB

Supplying and erecting AC Three Phase Four wire Multifunction Energy Meter of Rating 10 - 60A, Class 1.0 with din rail / Panel mounting to measures and display parameters with RS485 Modbus communication port. mounting whole current operated meter to measures and display V, I, kWh, KVAh, KW, KVA, P.F, THD, RS 485 Communication port. Electrical parameters shall be available on com port with their mapping address open for third party software

Supplying and erecting panel mounting type digital ammeter having three and half digit LED display, external CT operated, calibrated for suitable to operate on 500V, 0 to 1000A having accuracy class of 0.5, AC supply with necessary PVC wire leads and lugs and mounting hardware on provided panel complete with calibration certificate from manufacturer.

Supplying and erecting panel mounting type digital voltmeter having three and half digit LED display, calibrated for 0 to 750V AC suitable to operate on 500V having accuracy class of 0.5 ,AC supply with necessary PVC wire leads and lugs and mounting hardware on provided panel complete with calibration certificate from manufacturer.

Main LT Panel INCOMER Supplying and erecting metal work in CRCA sheet (16 guage) with fabrication of boxes, panel boards, etc. including cutting, bending, drilling, welding, riveting, treated with anti-rust treatment and duly powder coated or painted with one coat of red lead paint and 2 coats of enamel paint complete.

Supplying, installation & marking of surge arrestor/ surge protection device at the main distribution board after the incoming breaker of type 1+2 tested for Imax 50 kA for three phase and neutral with compliance to IEC 61643-11 as per specification no. CP-SPD

Supplying & erecting LED type indicating pilot lamp with LED colours red /yellow / green, 230 / 250V on provided box / panel with necessary material,wiring & connections etc.

Supplying & erecting LED type indicating pilot lamp with LED colour blue, 230 / 250 V on provided box / panel with necessary material, wiring & connections etc.

Supplying, erecting & marking SPMCB 6A to 32A, C- series with rated short -circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW- SWR/MCB

Providing & erecting 3 Pole MCCB 415V, 630A, rated short-circuit breaking capacity 36 kA (Ics=100% of Icu), adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact and MCCB should have phase barriers both sides, with insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification no. SW-SWR/MCCB Note:- 1) For use of 4 pole MCCBs in place of 3 pole MCCBs add 20% in rate of 3 pole MCCB.

Supplying and erecting LT current transformer with bar primary 50/5 to 1000/5 ratio with 15 VA burden erected in provided CRCA box duly secured with insulating materials connected to the meter with test certificates.

Supplying and erecting of any size electrolyte aluminium patti or bar in bus bar chamber / in panel or any other purpose, 500 V with require capacity with 99.9% aluminium purity with fixing arrangement (like lug or bottle type lug) to both the end with high grade polyolefin insulation sleeve complete as per specification no. BCPBB

Supplying and erecting AC Three Phase Four wire Multifunction Energy Meter of Rating 10 - 60A, Class 1.0 with din rail / Panel mounting to measures and display parameters with RS485 Modbus communication port. mounting whole current operated meter to measures and display V, I, kWh, KVAh, KW, KVA, P.F, THD, RS 485 Communication port. Electrical parameters shall be available on com port with their mapping address open for third party software

Supplying and erecting panel mounting type digital ammeter having three and half digit LED display, external CT operated, calibrated for suitable to operate on 500V, 0 to 1000A having accuracy class of 0.5, AC supply with necessary PVC wire leads and lugs and mounting hardware on provided panel complete with calibration certificate from manufacturer.

Supplying and erecting panel mounting type digital voltmeter having three and half digit LED display, calibrated for 0 to 750V AC suitable to operate on 500V having accuracy class of 0.5 ,AC supply with necessary PVC wire leads and lugs and mounting hardware on provided panel complete with calibration certificate from manufacturer.

Supplying and erecting self-locking arrangement with keys in duplicate, made of brass of grade 1 compliance to IS 729- 1979 duly erected, flush with surface of panel / cupboard

OUTGOING Providing & erecting 4 Pole MCCB, 415 V, 100A, rated short-circuit breaking capacity 25 kA (Ics=100% of Icu), adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact. MCCB with phase barriers on both sides, insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification no. SW SWR/MCCB Note:- 1) For use of 4 pole MCCBs in place of 3 pole MCCBs add 20% in rate of 3 pole MCCB.

Providing & erecting 4 Pole MCCB, 415V, 200A, rated short-circuit breaking capacity 25 kA (Ics=100% of Icu), adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact and MCCB should have phase barriers both sides, with insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification no. SW-SWR/MCCB Note:- 1) For use of 4 pole MCCBs in place of 3 pole MCCBs add 20% in rate of 3 pole MCCB.

Providing & erecting 4 Pole MCCB 415V, 400A, rated short-circuit breaking capacity 36 kA (Ics=100% of Icu), adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/ UV/ trip alarm contact and MCCB should have phase barriers both sides, with insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification no. SW-SWR/MCCB Note:- 1) For use of 4 pole MCCBs in place of 3 pole MCCBs add 20% in rate of 3 pole MCCB.

Providing & erecting 4 Pole MCCB 415V, 630A, rated short-circuit breaking capacity 36 kA (Ics=100% of Icu), adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact and MCCB should have phase barriers both sides, with insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification no. SW-SWR/MCCB Note:- 1) For use of 4 pole MCCBs in place of 3 pole MCCBs add 20% in rate of 3 pole MCCB.

Supplying & erecting LED type indicating pilot lamp with LED colours red / yellow / green, 230 / 250V on provided box / panel with necessary material, wiring & connections etc.

Supplying, erecting & marking SPMCB 6A to 32A, C- series (for motor/power) in provided distribution board as per specification no. SW-SWR/MCB

Supplying and erecting self-locking arrangement with keys in duplicate, made of brass of grade 1 compliance to IS 729- 1979 duly erected, flush with surface of panel / cupboard

Supplying and erecting LT current transformer with bar primary 50/5 to 1000/5 ratio with 15 VA burden erected in provided CRCA box duly secured with insulating materials connected to the meter with test certificates.

Supplying and erecting panel mounting type digital ammeter having three and half digit LED display, external CT operated, calibrated for suitable to operate on 500V, 0 to 1000A having accuracy class of 0.5, AC supply with necessary PVC wire leads and lugs and mounting hardware on provided panel complete with calibration certificate from manufacturer.

Supplying and erecting panel mounting type digital voltmeter having three and half digit LED display, calibrated for 0 to 750V AC suitable to operate on 500V having accuracy class of 0.5 ,AC supply with necessary PVC wire leads and lugs and mounting hardware on provided panel complete with calibration certificate from manufacturer.

Supplying and erecting iron work, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority.

Supplying and erecting extended rotary handle for MCCB with adjustable telescopic rod suitable for up to 250A MCCB.

Supplying and erecting extended rotary handle for MCCB with adjustable telescopic rod suitable for above 250A up to 630A MCCB.

HVAC Panel INCOMER Supplying and erecting metal work in CRCA sheet (16 guage) with fabrication of boxes, panel boards, etc. including cutting, bending, drilling, welding, riveting, treated with anti-rust treatment and duly powder coated or painted with one coat of red lead paint and 2 coats of enamel paint complete.

Supplying, installation & marking of surge arrestor/ surge protection device at the main distribution board after the incoming breaker of type 1+2 tested for Imax 50 kA for three phase and neutral with compliance to IEC 61643-11 as per specification no. CP-SPD

Supplying & erecting LED type indicating pilot lamp with LED colours red /yellow / green, 230 / 250V on provided box / panel with necessary material,wiring & connections etc.

Supplying & erecting LED type indicating pilot lamp with LED colour blue, 230 / 250 V on provided box / panel with necessary material, wiring & connections etc.

Supplying, erecting & marking SPMCB 6A to 32A, C- series with rated short -circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW- SWR/MCB

Providing & erecting 4 Pole MCCB, 415 V, 200A, rated short-circuit breaking capacity 25 kA (Ics=100% of Icu), adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact. MCCB with phase barriers on both sides, insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification no. SW SWR/MCCB Note:- 1) For use of 4 pole MCCBs in place of 3 pole MCCBs add 20% in rate of 3 pole MCCB.

Supplying and erecting LT current transformer with bar primary 50/5 to 1000/5 ratio with 15 VA burden erected in provided CRCA box duly secured with insulating materials connected to the meter with test certificates.

Supplying and erecting of any size electrolyte aluminium patti or bar in bus bar chamber / in panel or any other purpose, 500 V with require capacity with 99.9% aluminium purity with fixing arrangement (like lug or bottle type lug) to both the end with high grade polyolefin insulation sleeve complete as per specification no. BCPBB

Supplying and erecting AC Three Phase Four wire Multifunction Energy Meter of Rating 10 - 60A, Class 1.0 with din rail / Panel mounting to measures and display parameters with RS485 Modbus communication port. mounting whole current operated meter to measures and display V, I, kWh, KVAh, KW, KVA, P.F, THD, RS 485 Communication port. Electrical parameters shall be available on com port with their mapping address open for third party software

Supplying and erecting panel mounting type digital ammeter having three and half digit LED display, external CT operated, calibrated for suitable to operate on 500V, 0 to 1000A having accuracy class of 0.5, AC supply with necessary PVC wire leads and lugs and mounting hardware on provided panel complete with calibration certificate from manufacturer.

Supplying and erecting panel mounting type digital voltmeter having three and half digit LED display, calibrated for 0 to 750V AC suitable to operate on 500V having accuracy class of 0.5 ,AC supply with necessary PVC wire leads and lugs and mounting hardware on provided panel complete with calibration certificate from manufacturer.

Supplying and erecting self-locking arrangement with keys in duplicate, made of brass of grade 1 compliance to IS 729- 1979 duly erected, flush with surface of panel / cupboard

Supplying and erecting extended rotary handle for MCCB with adjustable telescopic rod suitable for above 250A up to 630A MCCB.

OUTGOING Providing & erecting 4 Pole MCCB, 415 V, 63A, rated short-circuit breaking capacity 25 kA (Ics=100% of Icu), adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact. MCCB with phase barriers on both sides, insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification no. SW SWR/MCCB Note:- 1) For use of 4 pole MCCBs in place of 3 pole MCCBs add 20% in rate of 3 pole MCCB.

Supplying & erecting LED type indicating pilot lamp with LED colours red / yellow / green, 230 / 250V on provided box / panel with necessary material, wiring & connections etc.

Supplying, erecting & marking SPMCB 6A to 32A, C- series (for motor/power) in provided distribution board as per specification no. SW-SWR/MCB

Supplying and erecting self-locking arrangement with keys in duplicate, made of brass of grade 1 compliance to IS 729- 1979 duly erected, flush with surface of panel / cupboard

Supplying and erecting iron work, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority.

Supplying and erecting extended rotary handle for MCCB with adjustable telescopic rod suitable for up to 250A MCCB.

Providing & erecting floor/wall mounting, MCCB panel board, with door, suitable for four pole incoming 250A, 6 ways four pole outgoing, up to 100 A MCCBs on iron frame, as per specification no SW-SWR/MCCBPB. (Excluding MCCBs)

Providing & erecting 3 Pole MCCB, 415 V, 100A, rated short-circuit breaking capacity 25 kA (Ics=100% of Icu), adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact. MCCB with phase barriers on both sides, insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification no. SW SWR/MCCB Note:- 1) For use of 4 pole MCCBs in place of 3 pole MCCBs add 20% in rate of 3 pole MCCB.

Providing & erecting 3 Pole MCCB, 415 V, 200A, rated short-circuit breaking capacity 25 kA (Ics=100% of Icu), adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact. MCCB with phase barriers on both sides, insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification no. SW SWR/MCCB Note:- 1) For use of 4 pole MCCBs in place of 3 pole MCCBs add 20% in rate of 3 pole MCCB.

Supplying & erecting triple pole and neutral distribution board (TPNDB), SP/TP MCBs total 8 ways /24 poles, with door, 1.2mm thickness surface/flush mounted, IP 43 Protection on iron/GI frame (vertical busbar type) as per specification no. SW-SWR/MCBDB

Supplying & erecting triple pole and neutral distribution board (TPNDB), SPMCB of 12 ways /phase (36 poles), with door, 1.2mm thickness surface/flush mounted, IP 43 Protection on iron/GI frame (horizontal busbar type) as per specification no. SW-SWR/MCBDB

Supplying, erecting & marking FPMCB 40A to 63A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board

Supplying, erecting & commissioning 2 pole RCCB 16/25A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB/RCCB

Supplying, erecting & marking SPMCB 6A to 32A, B- series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB

Supplying, erecting & marking SPMCB 6A to 32A, C- series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board

Supplying and erecting modular type switch 6A / 10A duly erected on provided plate and box with wiring connections complete.

Supplying and erecting modular type switch 16A duly erected on provided plate and box with wiring connections complete

Supplying and erecting modular type 3 pin 6A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete

Supplying and erecting ISI mark modular type 3 pin 6 / 16A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete.

Point wiring for light/bell hybrid type (Surface type under false ceiling and concealed type for drops & switch boards on walls) in min 20 mm PVC conduit / casing n capping with 1.5 sq.mm. (2+1E) FRLSH grade copper wires, modular type switch, earthing and required accessories as per specification No: WGPW/HW

Secondary point wiring for additional light/ bell point, concealed type in min 20 mm FRLS grade PVC conduit with 1.5 sq.mm. (2+1E) FRLSH grade copper wires with required accessories as per specification No: WG-PW/CW

Supplying & erecting mains with 2x4 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places.

Supplying & erecting mains with 1x4 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places.

Supplying and erecting mains with 2x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places.

Supplying and erecting mains with 1x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places.

Supplying and erecting mains with 2x1.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places.

Supplying and erecting mains with 1x1.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places.

Supplying and laying HMS PVC conduit FRLS grade 25 mm dia with necessary accessories in RCC work/false ceiling/false flooring as per specification No. WG-MA/CC.

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 3 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 6 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.

Providing & erecting hot dipped galvanised ladder type cable tray manufactured from 16 SWG (1.6 mm thick) GI sheet of 300 mm width & 75 mm height complete with necessary coupler plates & hardware.

Providing & erecting hot dipped galvanised ladder type cable tray manufactured from 16 SWG (1.6 mm thick) GI sheet of 150 mm width & 75 mm height complete with necessary coupler plates & hardware.

Supplying, erecting, testing and commissioning of 10kVA capacity online pure sine wave, with backup time of 1/2 hrs. PWM & IGBT based UPS with 0.9 to unity output pf, 3 phase input & 3 phase output complete with all protections as per specification no. AP-UPS

Supplying and erecting 12V/100Ah SMF battery with battery terminal wire, duly charged with 24 months warranty complete.

Supplying & laying (including excavation) reinforced cement concrete pipe of IS 458:2003 NP-2 class of 250 mm internal diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 and curing etc. complete.

Supplying and laying (including excavation of suitable width & depth up to 90 cm) 120 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete.

2MP IR Indoor Dome Fixed Camera -1/2.8"Progressive Scan CMOS, 1920 × 1080 at 25fps, 2.8mm Fixed lens, 0.01 Lux at F1.2, ICR, ONVIF (PROFILE S, PROFILE G), support H.265, H.264, MJPEG, 120db WDR, 3D Digital Noise Reduction, Three individually configurable stream, 12 VDC & PoE, Alarm & Audio : 1 input & output, IR range: 40m, Support on-board storage up to 128 GB (SD card not included), IP67, IK10, Edge Anlalytics- Line crossing detection, Intrusion detection, Motion detection, Scene change detection, Face Detection, Audio exception detection, video tampering, UL, CE, FCC certified.Warranty for 01 Year .

2MP IR Bullet Fixed Camera: 1/2.8"Progressive Scan CMOS, 1920 × 1080 at 25fps, 2.8 mm Fixed lens, 0.01 Lux at F1.2, 0 Lux with IR, ICR, ONVIF (PROFILE S, PROFILE G), support H.265, H.264, MJPEG, 120db WDR, 3D Digital Noise Reduction, Three individually configurable stream, 12 VDC & PoE, IR range: 40m, Support on-board storage up to 128 GB (SD card not included), IP67, Edge Anlalytics- Line crossing detection, Intrusion detection, Motion detection, Scene change detection, Face Detection, Video tampering, UL, CE, FCC certified.Warranty for 01 Year .

32ch Network Video Recorder- Connect Up to 32 IP Cameras, Dual OS, Up to 12 Megapixels Resolution, Two independent HDMI & Two VGA outputs, Atleast one HDMI output of 4K resolution, atleast 1 VGA output with output upto 1920 × 1080, Support H.265, MJPEG, Supports N+1 hot spare system,Supports RAID0, RAID1, RAID5, RAID6 and RAID10 ,Supports HDD hot swap, Supports Dual Power-Redundant, Incoming Bandwidth 320 Mbps, 8 SATA Hard Disks, ANR Technology, 8 SATA interfaces for 8 HDDs and capacity of each HDD upto 8TB, 3 × USB at least 1 × USB with 3.0, Alarm I/O 16/4, RS-485, RS-232, 2 RJ-45 10 /100/1000 Mbps self-adaptive Ethernet interface, Multiple network monitoring: Web viewer, CE, FCC, UL certified.

6TB Surveillance Hard Disk

42" LCD 24X7 Surveillance Monitor High performance High performance LCD monitor. Contrast ratio: 800:1. Picture-In-Picture (PIP) and Picture-And-Picture (PAP). Looping BNC output. RGB, DVI, and HDMI interface. Slim, space-saving design. Removable desk stand. 1366 x 786 TVL resoluiton

Supplying and installing cat-6 cable suitable for networking as per specification no. WG-COC/NC

Supplying & erecting HMS P.V.C. conduit 32 mm. dia. with necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC

Supplying and fixing 1 m UTP patch cord of Cat 6 type in position as per specification No. WG-COC/PC

Supplying and fixing 3 m UTP patch cord of Cat 6 type in position as per specification No. WG-COC/PC

Supplying and fixing 24 port patch panel with tool-less keystone jacks in provided U Rack complete as per specification no. WG-NAS/PP

Supplying and fixing 17U floor mount rack (Dimension- DxWxH – 800x600x954 mm) as per specification No. WG- NAS/RAK

Supplying, erecting, testing and commissioning of 3kVA capacity online pure sine wave with backup time of 1/2 hrs. PWM & IGBT based UPS with 0.9 to unity output pf, single phase input & 1 phase output complete with all protections as per specification no. AP-UPS

Supplying and erecting 12V/100Ah SMF battery with battery terminal wire, duly charged with 24 months warranty complete.

Supplying, fixing, and configuring 24 ports, POE switch in provided rack as per specification No. WG-NWC/ENS

Supplying and erecting 5m HDMI cord low voltage grade minimum 4k compliant to be laid in provided conduits with male/female 19 pin HDMI connectors complete.

Supplying, installing and testing UTP connector (RJ-45) as per specification No.

Supplying and fixing 6U wall mount rack (Dimension- DxWxH – 500x600x367mm) as per specification No. WG- NAS/RAK

Supplying and installing cat-6 armoured cable with ECCS tape suitable for networking as per specification No. WG- COC/NC

Supplying and fixing Power Distribution Unit for networking rack comprises of 6/16A (6 Nos. sockets), 25 A modular MCB, appropriate rating fuse and indicator lamp, enclosed in black powder coated metal with necessary arrangement for fixing as per specification No. WG- NAS/RAK

Note :-Two side of glass panels will be used & other two side will be covered by 1.5 mm thick solid SS 304 grade non cladded sheet which will be developed by the OEM. SITC of Electric Traction Passenger Lift with · Rated capacity :- 10 Passenger/680Kg · Floors :- G+1 floor (2 Stops/2 Landings) · Travel :-8 mtrs · Location of Lift Machine:- MR/MRL · Rated speed :- 1.0mps VS · Car/Landing door clear opening of 800 mm wide x 2000mm high · Clear Car size of 1300 mm wide x 1350 mm deep x 2250mm high · Lift shaft available having clear size of 3400 mm wide x2600 mm deep, +/- 1500 mm Pit depth, 2000 mm Overhead. · Doors type :- COPO/TOPO Doors with frame made from SS 304 grade solid(non-cladded) sheet of 1.5mm thick in hairline finish for car and all landing doors with SS door architraves/frames The lift doors shall have minimum 1 hour fire rating (with submission of necessary valid test certificate issued by NABL accredited or Independent test laboratory). · Lift car enclosure made from SS 304 grade solid (non- cladded) sheet of 1.5mm, thick with hairline finish with frame made from MS girders, bracing of adequate size with minimum safety factor of 5, with Toe Guard Apron, with necessary false ceiling with adequate LED lights, blower/fan for ventilation & SS chequered plate flooring, handrails,

Supplying, erecting, testing and commissioning of 12HP, VRF/VRV air conditioning system outdoor unit (ODU) complies type-IV OEM standards working on HFC refrigerant R410A or other required/suitable green equivalent refrigerant, for minimum cooling capacity as delivering 100% capacity at 47° C, non stop cooling even at 56° C and coefficient of performance (COP) 3.00 to 4.00, modular type vertical hot air discharge suitable for longer piping range upto 1000m operation in cooling mode with inverter/digital VRF/VRV technology microprocessor based control compressor starter/control panel with scroll compressor, air cooled copper condenser coil of suitable shape for increasing maximum heat transfer area, rain protection cover, built in oil separator, accumulator and oil receiver, copper tube aluminium fin air cooled condenser, condenser fan with motor suitable for 415V±10%, 50 Hz, 3 phase power supply (all suitable for high ambient conditions), internal copper refrigerant piping, internal wiring and refrigerant, etc. all housed in powder coated weather proof cabinet complete.

Supplying, erecting, testing and commissioning of 14HP, VRF/VRV air conditioning system outdoor unit (ODU) complies type-IV OEM standards working on HFC refrigerant R410A or other required/suitable green equivalent refrigerant, for minimum cooling capacity as delivering 100% capacity at 47° C, non stop cooling even at 56° C and coefficient of performance (COP) 3.00 to 4.00, modular type vertical hot air discharge suitable for longer piping range upto 1000 metre operation in cooling mode with inverter/digital VRF/VRV technology microprocessor based control compressor starter/control panel with scroll compressor, air cooled copper condenser coil of suitable shape for increasing maximum heat transfer area, rain protection cover, built in oil separator, accumulator and oil receiver, copper tube aluminium fin air cooled condenser, condenser fan with motor suitable for 415V±10%, 50 Hz, 3 phase power supply (all suitable for high ambient conditions), internal copper refrigerant piping, internal wiring and refrigerant, etc. all housed in powder coated weatherproof cabinet complete.

Supplying, erecting, testing and commissioning of 16HP, VRF/VRV air conditioning system outdoor unit (ODU) complies type-IV OEM standards working on HFC refrigerant R410A or other required/suitable green equivalent refrigerant, for minimum cooling capacity as delivering 100% capacity at 47° C, non stop cooling even at 56° C and coefficient of performance (COP) 3.00 to 4.00, modular type vertical hot air discharge suitable for longer piping range upto 1000 metre operation in cooling mode with inverter/digital VRF/VRV technology microprocessor based control compressor starter/control panel with scroll compressor, air cooled copper condenser coil of suitable shape for increasing maximum heat transfer area, rain protection cover, built in oil separator, accumulator and oil receiver, copper tube aluminium fin air cooled condenser, condenser fan with motor suitable for 415V±10%, 50 Hz, 3 phase power supply (all suitable for high ambient conditions), internal copper refrigerant piping, internal wiring and refrigerant, etc. all housed in powder coated weather proof cabinet complete.

Supplying, erecting, testing and commissioning of 18HP, VRF/VRV air conditioning system outdoor unit (ODU) complies type-IV OEM standards working on HFC refrigerant R410A or other required/suitable green equivalent refrigerant, for minimum cooling capacity as delivering 100% capacity at 47° C, non stop cooling even at 56° C and coefficient of performance (COP) 3.00 to 4.00, modular type vertical hot air discharge suitable for longer piping range upto 1000 metre operation in cooling mode with inverter/digital VRF/VRV technology microprocessor based control compressor starter/control panel with scroll compressor, air cooled copper condenser coil of suitable shape for increasing maximum heat transfer area, rain protection cover, built in oil separator, accumulator and oil receiver, copper tube aluminium fin air cooled condenser, condenser fan with motor suitable for 415V±10%, 50 Hz, 3 phase power supply (all suitable for high ambient conditions), internal copper refrigerant piping, internal wiring and refrigerant, etc. all housed in powder coated weatherproof cabinet complete.

Supplying, erecting, testing and commissioning of 20HP, VRF/VRV airconditioning system outdoor unit (ODU) complies type-IV OEM standards working on HFC refrigerant R410A or other required/suitable green equivalent refrigerant, for minimum cooling capacity as delivering 100% capacity at 47° C, non stop cooling even at 56° C and coefficient of performance (COP) 3.00 to 4.00, modular type vertical hot air discharge suitable for longer piping range upto 1000 metre operation in cooling mode withinverter/digital VRF/VRV technology microprocessor based control compressor starter/control panel with scroll compressor, air cooled copper condenser coil of suitable shape for increasing maximum heat transfer area, rain protection cover, built in oil separator, accumulator and oil receiver, copper tube aluminium fin air cooled condenser, condenser fan with motor suitable for 415V±10%, 50 Hz, 3 phase power supply (all suitable for high ambient conditions), internal copper refrigerant piping, internal wiring and refrigerant, etc. all housed in powder coated weatherproof cabinet complete.

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 10 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid inprovided trench/ pipe as per specification no. CB-LT/CU

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 16 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Providing & erecting hot dipped galvanised cover suitable for perforated type Cable tray manufactured from 18 SWG (1.2 mm thick) GI sheet of 400 mm width & 20 mm height complete with necessary hardware.

Supplying, erecting & marking FPMCB 40A to 63A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW- SWR/MCB

Supplying and erecting SS enclosure for MCCB suitable for up to 100A MCCB.

Supply, installation, testing & commissioning of Double skin air handling units fabricated from outer skin with 0.63 mm thick precoated G.I sheet & plain 0.63 mm thick precoated inner G.I sheet with 43 mm thick Puf with density of 38kg/m3 with Aluminum extruded frame work having Thermal break profile. Filter Section : MERV - 8 flitration system. VRF Cooling coil section.Drain pan- Single skin 18G SS 304 with 19 mm thick Nitrile insulation. Fan Section: DIDW Backward/Forward Curve Fan with IE3 motor. Opposed blade aerofoil design Aluminium volume control dampers, rubber pads below the Unit, along with cabling etc. 16TR/6000CFM AHU with DX KIT

Supply, installation, testing & commissioning of Double skin air handling units fabricated from outer skin with 0.63 mm thick precoated G.I sheet & plain 0.63 mm thick precoated inner G.I sheet with 43 mm thick Puf with density of 38kg/m3 with Aluminum extruded frame work having Thermal break profile. Filter Section : MERV - 8 flitration system. VRF Cooling coil section.Drain pan- Single skin 18G SS 304 with 19 mm thick Nitrile insulation. Fan Section: DIDW Backward/Forward Curve Fan with IE3 motor. Opposed blade aerofoil design Aluminium volume control dampers, rubber pads below the Unit, along with cabling etc.14TR/4800CFM AHU with DX KIT

Supply, installation, testing & commissioning of Double skin air handling units fabricated from outer skin with 0.63 mm thick precoated G.I sheet & plain 0.63 mm thick precoated inner G.I sheet with 43 mm thick Puf with density of 38kg/m3 with Aluminum extruded frame work having Thermal break profile. Filter Section : MERV - 8 flitration system. VRF Cooling coil section.Drain pan- Single skin 18G SS 304 with 19 mm thick Nitrile insulation. Fan Section: DIDW Backward/Forward Curve Fan with IE3 motor. Opposed blade aerofoil design Aluminium volume control dampers, rubber pads below the Unit, along with cabling etc. 10TR/3500CFM AHU with DX KIT

Supply, installation, testing and commissioning of VRV / VRF based ductable type, high static room/indoor unit (IDU) having nominal cooling capacity of 4.1TR (1640 cfm) to 5.0TR (2000 cfm) having EER as per BEE standards and specifications with evaporator fan with motor, copper tube aluminium fin evaporator coil, washable air filter, insulated drain tray, in built drain pump, expansion device, cordless remote control with necessary controls and electrical terminal to receive power supply, etc. having anti- corrosive coating suitable for coastal area and decorative slim dimension suitable for ceiling suspended arrangement with an electronic control console and any additional refrigerant and oil charge as per requirement during installation complete.

Supply, installation, testing and commissioning of VRV / VRF based ductable type, high static room/indoor unit (IDU) having nominal cooling capacity of 5.1TR (2040 cfm) to 6.0TR 2400 cfm) having EER as per BEE standards and specifications with evaporator fan with motor, copper tube aluminium fin evaporator coil, washable air filter, insulated drain tray, in built drain pump, expansion device, cordless remote control with necessary controls and electricalterminal to receive power supply, etc. having anti- corrosive coating suitable for costal area and decorative slim dimension suitable for ceiling suspended arrangement with an electronic control console and any additional refrigerant and oil charge as per requirement during installation complete.

Supply, installation, testing and commissioning of VRV / VRF based ductable type, high static room/indoor unit (IDU) having nominal cooling capacity of 8.0TR (3200 cfm) having EER as per BEE standards and specifications with evaporator fan with motor, copper tube aluminium fin evaporator coil, washable air filter, insulated drain tray, in built drain pump, expansion device, cordless remote control with necessary controls and electrical terminal to receivepower supply, etc. having anti-corrosive coating suitable for costal area anddecorative slim dimension suitable for ceiling suspended arrangement with anelectronic control console and any additional refrigerant and oil charge as perrequirement during installation complete.

Supply, installation, testing and commissioning of VRF/VRV based ceiling suspended 4 Way cassette room/indoor unit (IDU-compact/standard size) of nominal cooling capacity 1.0TR ( 441 cfm ) to 1.3TR (512 cfm ) having EER as per BEE standards and specifications, suitable as per site requirement with swing louvers and adjustable blades from sides. IDU with drainage arrangements, fan, refrigerant liquid and refrigerant piping, cordless remote control, and fresh air port etc. IDU shall have anti corrosive coating suitable for coastal area in all respects suitable to operate on 1-phase, 230V, 50Hz, AC supply complete. The unit consisting with any additional refrigerant and oil charge as per requirement during installation.

Supply, installation, testing and commissioning of VRF/VRV based ceiling suspended 4 Way cassette room/indoor unit (IDU-compact/standard size) of nominal cooling capacity 1.5TR (512 cfm) to 1.8TR (618 cfm) having EER as per BEE standards and specifications, suitable as per site requirement with swing louvers and adjustable blades from sides. IDU with drainage arrangements, fan, refrigerant liquid and refrigerant piping, cordless remote control, and fresh air port etc. IDU shall have anti corrosive coating suitable for coastal area in all respects suitable to operate on 1-phase, 230V, 50Hz, AC supply complete. The unit consisting with any additional refrigerant and oil charge as per requirement during installation.

Supply, installation, testing and commissioning of VRF/VRV based ceiling suspended 4 Way cassette room/indoor unit (IDU-compact / standard size) of nominal cooling capacity 2.0TR (618 cfm) to 2.3TR (671 cfm) having EER as per BEE standards and specifications, suitable as per site requirement with swing louvers and adjustable blades from sides. IDU with drainage arrangements, fan, refrigerant liquid and refrigerant piping, cordless remote control, and fresh air port etc. IDU shall have anti corrosive coating suitable for coastal area in all respects suitable to operate on 1-phase, 230V, 50Hz, AC supply complete. The unit consisting with any additional refrigerant and oil charge as per requirement during installation.

Supply, installation, testing and commissioning of VRF/VRV based ceiling suspended 4 Way cassette room/indoor unit (IDU-compact / standard size) of nominal cooling capacity 2.6TR (918 cfm) to 2.8TR ( 1100 cfm ) having EER as per BEE standards and specifications, suitable as per site requirement with swing louvers and adjustable blades from sides. IDU with drainage arrangements, fan, refrigerant liquid and refrigerant piping, cordless remote control, and fresh air port etc. IDU shall have anti corrosive coating suitable for coastal area in all respects suitable to operate on 1-phase, 230V, 50Hz, AC supply complete. The unit consisting with any additional refrigerant and oil charge as per requirement during installation.

Supply, installation, testing and commissioning of VRF/VRV based ceiling suspended 4 Way cassette room/indoor unit (IDU-compact / standard size) of nominal cooling capacity 3.0TR (1100 cfm) to 3.2TR (1165 cfm) having EER as per BEE standards and specifications, suitable as per site requirement with swing louvers and adjustable blades from sides. IDU with drainage arrangements, fan, refrigerant liquid and refrigerant piping, cordless remote control, and fresh air port etc. IDU shall have anti corrosive coating suitable for coastal area in all respects suitable to operate on 1-phase, 230V, 50Hz, AC supply complete. The unit consisting with any additional refrigerant and oil charge as per requirement during installation.

Supply, installation, testing and commissioning of VRF/VRV based Hi-wall type indoor unit (IDU) of nominal cooling capacity 1.3TR (421 cfm) to 1.7TR (586 cfm) having EER as per BEE standards and specifications with multiple speed evaporator fan with motor, copper tube aluminium fin evaporator coil, washable air filter, insulated drain tray, expansion device, cordless remote control with necessary controls, with 3-core copper flexible cord of required length and electrical terminal to receive power supply, etc. IDU shall have anticorrosive coating suitable for coastal area. Unit shall be suitable for indoor wall mounting, having an electronic control console, provided with suitable mounting brackets with any additional refrigerant and oil charge as per the requirement during installation, connected to the system complete.

DOL Starter panel as per the above details - 3.7KW

Supplying, laying/fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 41.3mm dia (OD) for liquid line/suction line supplyand return piping of suitable gauge (hard copper pipe for liquid main line and softcopper pipe for refrigerant) along with necessary supports, hangers, clamps,vibration isolators and fittings such as bends, tees, valves, gauges, strainers withinsulation of 19mm thick elastomeric nitrile rubber along with application ofmulticoating of VRV/VRF piping for protection against mechanical damages,fungal growth, flame spread, water permeance and ultra violet radiations withOEM standards of VRV/VRF air conditioning system complete.

Supplying, laying/fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 34.9 mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations with OEM standards of VRV/VRF air conditioning system complete.

Supplying, laying / fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 28.6 mm dia (OD) for liquid line / suction line supply and return piping of suitable gauge ( hard drawn copper pipe for liquid main line and for refrigerant ) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19 mm thick elastomeric nitrile rubber along with application of multicoating suitable for use with VRV / VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations complete with OEM standards of VRV / VRF air conditioning system.

supplying, laying/fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 22.2mm dia (OD) for liquid line/suction line supplyand return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultraviolet radiation with OEM standards of VRV/VRF air conditioning system complete.

Supplying, laying / fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 19.1 mm dia (OD) for liquid line / suction line supply and return piping of suitable gauge ( hard drawn copper pipe for liquid main line and for refrigerant ) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19 mm thick elastomeric nitrile rubber along with application of multicoating suitable for use with VRV / VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations complete with OEM standards of VRV / VRF air conditioning system.

Supplying, laying / fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 15.9 mm dia (OD) for liquid line / suction line supply and return piping of suitable gauge ( hard drawn copper pipe for liquid main line and for refrigerant ) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19 mm thick elastomeric nitrile rubber along with application of multicoating suitable for use with VRV / VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations complete with OEM standards of VRV / VRF air conditioning system.

Supplying, laying / fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 12.7 mm dia (OD) for liquid line / suction line supply and return piping of suitable gauge ( hard drawn copper pipe for liquid main line and for refrigerant ) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19 mm thick elastomeric nitrile rubber along with application of multicoating suitable for use with VRV / VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations complete with OEM standards of VRV / VRF air conditioning system.

Supplying, laying / fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 9.5 mm dia (OD) for liquid line / suction line supply and return piping of suitable gauge ( hard drawn copper pipe for liquid main line and for refrigerant ) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19 mm thick elastomeric nitrile rubber along with application of multicoating suitable for use with VRV / VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations complete with OEM standards of VRV / VRF air conditioning system.

Supplying, installing, testing and commissioning FR, XLPE armoured cable 2 core 1.5 sq.mm. copper conductor complete erected on wall/ ceiling complete as per specification no. CB-LT/CU (Between Indoor & Outdoor Units and for remote control units)

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3 core 2.5 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Providing & erecting hot dipped galvanised ladder type cable tray manufactured from 16 SWG (1.6 mm thick) GI sheet of 200 mm width & 75mm height complete with necessary coupler plates & hardware.

Providing & erecting hot dipped galvanised ladder type cable tray manufactured from 16 SWG (1.6 mm thick) GI sheet of 300 mm width & 75mm height complete with necessary coupler plates & hardware. Supply, Installation and testing of UPVC 483 piping with 9 mm thick class 'O' nitrile rubber insulation with elbow, bends, tees, clean outs etc. complete with all necessary accessories.

Supplying and erecting 25/32 mm (ID/OD) Chlorinated polyvinyl chloride pipe (CPVC), thickness 3.2 mm conforming to IS 15778 (CTS Series) with necessary CPVC fittings and solvent cement for Solar Water Heater System as per specification No. ESD-HWP/CPVC

Supplying and erecting 32/40 mm (ID/OD) Chlorinated polyvinyl chloride pipe (CPVC), thickness 3.8 mm conforming to IS 15778 (CTS Series) with necessary CPVC fittings and solvent cement for Solar Water Heater System as per specification No. ESD-HWP/CPVC

Supply, fabrication, painting, Installation and testing of MS structural for outdoor/indoor units ( not separately specified under item) as per Specified below. Vendors shall note that scope of standard support requirement for pipes, ducts and cable trays as per approved drawing are already included in respective items' price and this item only covers structural Stand for ODU or any special requirement which need to be provided as per additional requirement due change in position, drgs etc. complete. The item also include providing & applying two coat of approved make anti corrosive paint over a coat of primer as per manufacturers recommendations.

RECTANGULAR DUCTING Supplying & erecting GI sheet 0.6 mm (24 SWG having zinc coating of 275 microns with galvanisation process compliance to IS 2629:1985 to be used for fabrication of boxes panel boards, etc. including cutting, bending, drilling, welding, rivetting etc. & painting with one coat of red lead paint & 2 coats of enamel paint.

Supplying and erecting GI sheet 1 mm (20 SWG) having zinc coating of 275 microns with galvanization process compliance to IS 2629:1985 to be used for fabrication of boxes panel boards etc. including cutting, bending, drilling, welding, riveting etc. and painting with one coat of red lead paint and 2 coats of enamel paint.

Supplying and erecting GI sheet 1.25 mm (18 SWG) having zinc coating of 350 microns with galvanization process compliance to IS 2629:1985 to be used for fabrication of boxes panel boards etc. including cutting, bending, drilling, welding, riveting etc. and painting with one coat of red lead paint and 2 coats of enamel paint.

THERMAL INSULATION Providing adhesive thermal insulation for supply return air duct with 19mm nitrile rubber insulation having R-value as per the prevailing provisions in ECBC-2007.

ACOUSTIC INSULATION Providing and applying of acoustic insulation for air ducts with 25mm thick 48 kg/cu.m fiber glass faced with RP tissue and covered with 26 SWG perforated aluminium sheets complete.

Supply, installation, testing and commissioning of manually operated, opposed blade, duct mounted, flanged volume control dampers of required sizes in GI construction complete with operating mechanism, mounting arrangement, rubber refrigerant kits etc. complete.

COLLAR DAMPER Supply, installation, testing and commissioning of volume control box with collar for control damper of required sizes in GI construction with operating mechanism, mounting arrangement, rubber refrigerant kits etc. complete.

CANVAS CONNECTION Supply, fabrication, installation an testing of flexible canvass connections constructed between ductable unit / dampers / ducting of required size with fire resist flexible double canvas sleeve complete.

GRILL Supplying and erecting aluminium powder coated linear grill of suitable size for width length without collar dampers having matching colour with theexisting false ceiling and suitable for deflection of 15/30/45°.

FRESH AIR INLINE FAN Supplying, erecting, testing & commissioning exhaust air system, ductable circular inline exhaust air fan inlet unit having 1000cfm capacity with maintaining the static pressure minimum 20mm suitable to operate on 1 phase, 230V, 50Hz, A.C. supply complete.

STANDBY SPLIT UNIT Supplying, installing, testing & commissioning split type variable speed inverter technology with minimum 3 to 1 convertible mode for compressor, room air conditioning unit 1.3TR to 1.6TR capacity having ISEER minimum 3.8 to maximum 4.39 suitable to operate on 250V, 50 Hz, A.C. supply having 1 no of air handling unit hi-wall/floor mounting type complete with refrigerant R32 having copper condenser, minimum 2.5PM filter, self diagnosis feature, stabilizer free operation & temperature display on indoor unit, noise level maximum 50bBA at position as per specification no. APAC/ WAC

REFRIGERANT PIPE Supplying & erecting seamless outside & inside, smooth, dry and clean copper pipe with ROHS compliant suitable for refrigerant having 22SWG thickness and inner dia/size 12mm complete.

Supplying and erecting ABC powder type fire extinguisher as per IS : 15683 of 6 kg capacity with necessary clamp for erection on wall.

S u p p l y i n g & erecting Carbon Dioxide (CO2) fire extinguisher of 4.5 kg. capacity cartridge type conform to IS 2878 /15683 complete erected with necessary clamp made from 50 x 6 mm. M. S. flat with nut & bolts routed in wall complete.

Supplying, installation, testing and commissioning of booster fire pump [BP] suitable for water discharge of 450 LPM at 35 m head driven by electric motor 415 volts, 3 phase 50 Hz, AC supply of 5.5 kW or of suitable kW capacity for manual/automatic operation and consisting of following : (a) Horizontal/vertical type, single/multi stage, centrifugal casing pump of cast iron body & bronze/CI impeller with stainless steel shaft (SS410 grade), mechanical seal conforming to IS 1520. (b) Squirrel cage induction motor, TEFC, synchronous speed 3000 RPM, suitable for operation with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325. (c) M.S. fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required. (d) Erected on provided suitable size cement concrete foundation duly plastered with anti vibration pads with perfect aligning, proper levelling complete pump set with accessories duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003) complete, as per specification no. FF-MFP/BP

Supplying & erecting automatic control panel for 3 Ph, 415 volt, A.C. Submersible/centrifugal pump set up to 7.5 HP - 10 H.P. consisting of DOL starter having relay range 13-21 AMP,S.P.P., Combined ammeter/voltmeter, phase indicating lamp enclosed in CRCA powder coated Vibration proof enclosure with IP 54 protection. Control Panel should offer single phasing, phase reversal, phase imbalance etc.

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3 core 6 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Supplying and erecting 100 mm dia. pressure gauge , 0-300 PSI or 0-14 kg per cm square fitted with 12/15 mm dia. pad cock valve, erected with provided G.I. pipe, elbow etc. complete as per specification no. FF-FFA/PG

Supplying and erecting 12/15 mm dia pressure switch with provided isolation valve, G.I. nipple, elbow, etc complete as per specification no. FF-FFA/PS

Supplying and erecting G.I. pipe ‘C’ class ERW 150 mm dia with necessary fittings complete as per specification no. FF-PP

Supplying and erecting G.I. pipe ‘C’ class ERW 100 mm dia with necessary fittings complete as per specification no. FF-PP

Supplying and erecting G.I. pipe ‘C’ class ERW 75/80 mm dia with necessary fittings complete as per specification no. FF-PP

Supplying and erecting 100 mm dia cast iron double flange NRV complete with PN16 pressure rating, as per specification no. FF-VL/NRV

Supplying and erecting 100 mm dia. cast iron double flange sluice valve complete with PN16 pressure rating, as per specification no. FF-VL/SV

Supplying and erecting 100 mm dia. cast iron double flange butterfly valve of size complete with PN16 pressure rating, as per specification no. FF-VL/BFV

Supplying and erecting 100 mm dia Cast Iron end line strainer of Y-type flanged end pattern, PN16 pressure rating, SS screen, end connection with Flanged / Screwed / Socket Weld / Butt Weld End etc with standard OAR (open area Ratio) for positive suction complete as per specification no. FF-VL/ELS

Supplying and erecting stainless steel single outlet hydrant valve fitted with necessary accessories complete as per specification no. FF-VL/HV

Supplying and erecting stainless steel branch pipe 63 mm dia fitted with 20 mm dia detachable hexagonal nozzle complete as per specifications no. FFFFA/NZ

Supplying and erecting 63mm dia, reinforced rubber lined (R.R.L.) hose pipe, 15m in length, fitted with necessary accessories complete as per specification no. FF-FFA/RRL

Supplying and erecting M.S./CRCA cabinet for housing Floor Hydrant valve, hose pipe, hose reel and branch pipe (size 1000 x 736 x 736 mm.) made from 16 SWG sheet and angle iron 25 x 25 x 4 mm. having front doors with viewing glass (8"x6") and locking arrangement with necessary fixing material such as rubber bidding etc. duly painted in post box red colour( Code 538 of IS 5)

Supplying and erecting 20/25mm dia gun metal air release cock, with necessary G.I. coupling to be fitted on top of air vessel or on wet riser complete as per specification no. FF- FFA/ARV

Supplying and erecting fire brigade header ( Siamese connection )of 100 mm dia, for supplying water in fire tank complete as per specification no. FFFA/FMC

Supplying and installing wall mounting swinging hose reel drum fitted with 19 mm dia. 30m long high pressure polypropylene (Polyhose) along with necessary accessories complete as per specification no. FF-FFA/HV

Supplying and fixing of Signages-Exit (Nightglow with lamination, Self adhesive) 100 mm x 300 mm

Supplying and fixing of Signages-Staircase (Nightglow with lamination, Self adhesive) 100 mm x300mm

Supplying and fixing of Signages-Fire Extinguisher (Nightglow with lamination, Self adhesive) 200 mm x200mm

Supplying and fixing of Signages-Hose reel (Nightglow with lamination, Self adhesive) 200 mm x250mm

Supplying and fixing of Signages-Assembly Point (ACP with MS, Grouted) 600 mm X600 mm

Supplying, installing, testing and commissioning of addressable manual call points ( break glass type/pull station type), made of addressable break glass plastic square in shape surface/flush mounted with "Break Glass" massage embedded on the glass, complete erected with mounting base and required accessories conforming to EN 54 or UL listed with 3 years equipment replacement warranty FF-AFAS/MCP.

Supplying, installing, testing and commissioning of addressable horn cum strobe sound/ hooter, output frequency 500 to 1000 Hz with dB as per Chart given in IS 15908:2021, with flashing at 1 Hz over the strobe’s entire operating voltage range EN 54, conforming to IS 2189: 2008, IS 15908:2021 standards with 3 years equipment replacement warranty FF-AFAS/SSH.

Supplying, installing, testing and commissioning of micro processor based intelligent addressable main fire alarm panel, central processing unit with the 2 loop capacity and capable of supporting upto 250 devices and detectors per loop, with on-board LCD display with min 16 lines of text, operating at 230 V 50 HZ - AC with inbuilt Battery Backup of a minimum 24 hours in normal condition and 30 min in alarm condition, suitable provision for network connectivity, interfacing with third party equipment via a MODBUS/ OPC/ L-ON interface etc. conforming to IS 15908:2021, IS 2189: 2008, EN 54 & VDS / FM/ UL 864 (10th edition) with 3 years replacement warranty FF- AFAS/CP.

Supplying, installing, testing and commissioning of addressable fire control/relay module complete as required, with 3 years equipment replacement warranty conforming to IS 5051Part 2 (Sec 1 to 3) : 1982 reed relays, EN 54 or UL Listed FF-AFAS/CRM

Supplying, installing, testing and commissioning of addressable fire isolator module complete as required. EN 54 /FM or UL Listed with 3 years equipment replacement warranty conforming to IS 5051Part 2 (Sec 1 to 3) : 1982 Reed relays FF-AFAS/ISM

Supplying, installing, testing and commissioning FR, XLPE armoured cable 2 core 1.5 sq.mm. copper conductor complete erected on wall/ ceiling complete as per specification no. CB-LT/CU

Supplying, installing, testing and commissioning of repeater panel with suitable battery backup of a minimum of 24 hours in normal condition and 30 min in alarm condition, 80 backlit alphanumeric LCD display with inbuilt buzzer to indicate fault/fire alarm, manual control keys for silence/mute and to reset the FACP from the repeater station. Panel size shall not more than 175 x 275 x 65 mm conforming to EN 54 or UL approved with 3 years equipment replacement warranty FF AFAS/RP

Supplying, erecting, testing and commissioning amplifier 120 W for Public address system suitable to operate on 230 Volts A.C. / 12 Volts D.C. supply as per specification No. FFPA/AFR

Supplying, erecting, testing and commissioning sound column 15 Watts complete as per specification No. FFPA/ SOC

Supplying, erecting, testing and commissioning microphone as per specification No. FF-PA/MIC

Supplying & erecting, stand for microphone. (Similar to AHUJA make model DGN)

Supplying erecting, testing to 2 core shielded Microphone cable as per specification No. FF-PA/MCC

Supplying, erecting, testing and commissioning of 1.5 sq mm speaker wire complete.

Spectrum Infrastructure (BID ID -6828881)