Construction of Science Lab, Art Craft and Library Room at Govt. High School Gran Brayotrian, Zone Reasi, District Reasi (Double Storeyed) (2nd call)

Amount

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (Not exceeding 1.5 mtr in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, depth upto 1.5 mtr including disposal of excavates earth upto 1 mtr from cutting edge, disposed earth is to be levelled and neatly dressed in: All kinds of soil (including all carriages lead and lift if any)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering- All work upto plinth level. 1:4:8 (1 cement: 4 coarse sand: 8 graded stone aggregate 40 mm nominal size) Crushed (including all carriages lead and lift if any)

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level. 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) Crushed with 20% boulder (including all carriages lead and lift if any)

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centenng, shuterring, finishing and reinforcement- All work upto plinth level. 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) (including all carriages lead and lift if any)

Centering and shuttering inclduing strutting~ propping etc and removal of form work for foundations footings. Bases of columns (including all carriages lead and lift if any)

Centering and shuttering including strutting~ propping etc and removal of form work for - Columns, piers, abutments, pillars, posts and struts (including all carriages lead and lift if any)

Centering and shuttering including strutting, propping etc. And removal of form for- Suspended floors, roofs, landings, balconies and access platform. (including all carriages lead and lift if any)

Centring and shuttering including strutting, propping etc and removal of form for- Lintels, beams, plinth beams, girders, bressumers and centilevers .(including all carriages lead and lift if any)

Centring and shuttermg including strutting, propping etc. and removal of form for edges of slab (including all carriages lead and lift if any)

Brick work with common burnt clay F.P.S. (non-modular) bricks of class designation 75 in foundation and plinth in cement mortar 1:6 (1 cement : 6 coarse sand) (including all carriages lead and lift if any)

Extra for brick work in superstructure above plinth level upto floor V level (by manual means) (including all carriages lead and lift if any)

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for seperately): Sal wood (including all carriages lead and lift if any)

Providing and laying Cement Concrete 1:5:10 (1 cement: 5 coarse sand : 10 graded brick aggregate 40 mm nominal size) in retaining wall/return wall, columns etc. excluding cost of centering and shuttering, all work upto floor V level (including all carriages lead and lift if any)

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts ans sturts, etc. upto floor five level excluding cost of centring, shuttering, finishing and reinforcement. 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded crushed stone aggregate 20mm nominal size). (including all carriages lead and lift if any)

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. (including all carriages lead and lift if any)

Providing and fixing 35mm panelled or panelled and glazed shutters for doors, windows and clerestory windows including ISI marked M.S. Presssed Butt hinges bright finished of required size with neccesary screws excluding panelling which will be paid for serparately, all complete as per direction of engineer- in charge. Second class deodar wood. (including all carriages lead and lift if any)

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grovees or rebates to be measured), Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. Coir veneer board (conforming to IS 14842) 12mm thick. (including all carriages lead and lift if any)

Providing and fixing 35mm thick wire gauze shutters using galvanised M.S. Wire gauze of average width for aperature 1.4mm in both direction with wire of dia 0.63mm for doors, windows and clerestory windows with hinges and necessary screws: Second class deodar wood. (including all carriages lead and lift if any)

Providing and fixing 35mm glazed shutters for doors, windows and clerestory windows using 10 kg/sqm (4mm thick) float glass panes including lSI marked M.S. pressed butt hinges bright finished of required size with necessary screws. Second class deodar wood (including all carriages lead and lift if any)

Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete: 50x12mm second class teak wood (including all carriages lead and lift if any)

15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 6 ( 1 cement : 6 fine sand) (including all carriages lead and lift if any)

12mm Cement plaster of mix: 1 : 6 ( 1 cement : 6 fine sand) (including all carriages lead and lift if any)

6mm cement plaster to ceiling of mix 1 : 3 (1 cement: 3 fine sand) (including all carriages lead and lift if any)

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. Layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering lead upto 50m and lift upto 1.5m. (including all carriages lead and lift if any)

Supplying and filling in plinth with fine sand under floors including, watering, ramming consolidating and dressing complete. (including all carriages lead and lift if any)

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to lS: 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete: Size of tile 60x60cm (including all carriages lead and lift if any)

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc including priming coat with approved steel primer all complete. Fixed to openings / wooden frames with rawl plugs screws etc. (including all carriages lead and lift if any)

Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggreagate 20mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth. Crushed (including all carriages lead and lift if any)

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10mm diameter bolts, nuts and wooden plugs and em beddings in cement concrete block 30x10x15 em 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size ) (including all carriages lead and lift if any)

Providing and fixing aluminium sliding door bolts lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : 250x16 mm (including all carriages lead and lift if any)

Providing and fixing aluminium tower bolts lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : 150x10 mm (including all carriages lead and lift if any)

Providing and fixing aluminium tower bolts lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : 200x10mm (including all carriages lead and lift if any)

Providing and fixing aluminium hanging floor door stopperlSI marked anodised (anodic coating not less than gradeAC 10 as per IS: 1868) transparent or dyed to requiredcolour or shade with necessary screws etc. complete : Twin rubber stopper (including all carriages lead and lift if any)

Providing and fixing aluminium handles lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. Complete: 125mm (including all carriages lead and lift if any)

Providing and fixing aluminium handles lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. Complete: 100mm (including all carriages lead and lift if any)

Finishing walls with water proofing cement paint of required shade. New work (two or more coats) applied @3.84 kg/10 sqm (including all carriages lead and lift if any)

Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacture, over the plastered wall surface to prepare the surface even and smooth complete. (including all carriages lead and lift if any)

White washing with lime to give an even shade. New work (three or more coats) (including all carriages lead and lift if any)

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade. New work (two or more coats) over and including priming coat with cement primer. (including all carriages lead and lift if any)

Applying priming coat: with ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) (including all carriages lead and lift if any)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work. (including all carriages lead and lift if any)

Electric wiring with 1.5 sqmm copper cable including 20mm dia 2mm thick PVC 5 amp with sunken box and connection to the main pole complete as directed by engineer-incharge. (including all carriages lead and lift if any)

M/S DALIP KUM,AR

chanderudhaysingh

Ashok Kumar

Jugal Kishore Sharma