Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | Ist₹3.3 LAccepted-Finance SANAT NAGAR SRINAGAR PIN 190005 J K | SRINAGAR | JAMMU AND KASHMIR | 190005 | ₹3.3 L | Ist | Accepted-Finance L1 |
| 2 | 2nd₹3.5 LRejected-Finance | ₹3.5 L | 2nd | Rejected-Finance L2 |
| 3 | Not Admitted-Fee/PreQual/Technical/Finance SCO 341 342 FF SECTOR 34A CHANDIGARH | CHANDIGARH | - | - | Not Admitted-Fee/PreQual/Technical/Finance Others-Insufficient experience submitted by the Firm |
| Sl No | Description | Qty | Unit | M/s Bhat Engineering Works L1 | GOOD LUCK TRADERS L2 |
|---|---|---|---|---|---|
| 1.00 | Dismantling / Dismassembly works:
a. Feeding System
Hopper and Feeder: Detach the hopper and feeder units. Label all electrical and mechanical connections.
b. Grinding and Mixing Units
Grinder: Remove belts, pulleys, and motor connections. Carefully extract the grinding chamber.
Mixer: Disconnect the mixer from power sources and supporting structures. Label all inlets and outlets.
c. Pelletizing Unit
Pellet Mill: Open the mill casing. Remove the ring die and press rollers as per manufacturer guidelines.
d. Feeding section of the mill.
Disassembling the Belts, hoppers and any other part of the machine which needs to be disassembled for shifting it from ne place to other.
The Job also includes the shifting of Machinery lying in the vicinity (Currently not installed) and to be used on the First Floor. The Contractor to visit the site to get acquitained themselves fimiliar with the site conditions. | 1 | Cjob | 55,000 ₹55,000 Lowest | 57,000 ₹57,000 |
| 2.00 | Transportation / Shifting (Carriage):
1. Equipment and Resources
Hydra Crane: Utilize a Hydra crane or any other suitable Machinery with a lifting capacity suitable for your heaviest component.
Transport Vehicles: Depending on the size and weight of the components, flatbed trucks / Tractors or trailers may be required for horizontal movement.
Lifting Accessories: Ensure the availability of slings, shackles, and spreader bars rated for the loads to be lifted.
2. Loading Procedure
Component Inspection: Before lifting, inspect each component for structural integrity to ensure safe handling.
Lifting Points Identification: Determine and mark the appropriate lifting points on each component to maintain balance during hoisting.
Secure Lifting: Attach slings and shackles securely, ensuring they are free from twists and are appropriately tensioned.
Controlled Lifting: Lift components slowly and steadily, maintaining clear communication between the crane operator and ground personnel.
3. Transportation
Movement Coordination: Assign a signal person to guide the crane operator, ensuring synchronized movements.
Speed Regulation: Maintain a slow and steady pace, not exceeding 2 km/h, to prevent load swinging and ensure safety.
Obstacle Management: Have personnel ready to remove any unforeseen obstacles along the path promptly.
4. Unloading and Placement
Site Preparation: Ensure the new location is ready to receive the components, with foundations or supports in place as required.
Alignment and Positioning: Carefully lower each component into its designated position, making necessary adjustments for alignment.
Securing Components: Once placed, secure the components to prevent movement or tipping. | 1 | Cjob | 35,000 ₹35,000 Lowest | 36,500 ₹36,500 |
| 3.00 | Assembling - Reinstallation of the Machinery at new place.
1.Preliminary Work
Site cleaning and preparation for foundation layout.
Marking of foundation bolts and layout as per machinery drawings or already taken notes during disassembling.
Verification of foundation levels.
2. Mechanical Erection
Checking and inspection of machinery. If in case any damage is done to machinery at any point of disassembly and carriage same may be borne by the contractor free pf cost.
Positioning of base frames and equipment using chain blocks/cranes.
Assembly of subunits (e.g., attaching motor and gearbox to mixer, extruder assembly).
Installation of bucket conveyor:
Alignment and vertical erection of trunking
Fixing head and boot sections
Fitting buckets and belt/chain
Alignment of machinery and securing on base.
Bolting, leveling, and vibration pad placement (if needed).
Assembling and levelling of the other miscellineous components of the machinery
3. Electrical Installation
Installation of control panels.
Cable laying from panels to motors and instruments.
Motor termination and earthing.
Installation of start/stop switches, emergency cutoffs.
Connection of load cells, sensors, and temperature controllers (for extruder/dryer if present). | 1 | Cjob | 32,000 ₹32,000 Lowest | 34,000 ₹34,000 |
| 4.00 | Testing and Commissioning
Dry Run Testing (No Material)
Start each machine independently to ensure proper rotation and load-free operation.
Run complete line sequentially (without feed).
Check vibration levels, abnormal noise, motor temperature rise.
Verify interlock logic in the control panel.
Greasing of the Motors.
Adjust variable speed drives (if used) for conveyors and feeders.
Wet Run / Trial Production
Load raw materials into feed hopper.
Start complete production sequence:
check for the whole machine operation and quality of output.
Greasing of the Motors.
Check for any other problems.
Performance Testing
Run machine at rated capacity for minimum 4–8 hours continuously.
Check for:
Overheating of motors.
Feed uniformity and output rate (kg/hr or ton/day).
Electrical load and energy consumption.
Temperature and dwell time in dryer.
Dust and emission levels (for environment/safety).
Any Consumables / Defunct Items necessary for the Testing and Commissioning of Machinery shall be borne by the Intending Department. The Machinery shall be tested in presence of Officials of the intending department and shall perform to the Satisfication of the Intending Department officials / Engineer in Incharge. | 1 | Cjob | 46,500 ₹46,500 Lowest | 47,800 ₹47,800 |
| 5.00 | Electrical Works:
Electrical Panel
Providing and fixing Automatic motor control centres fabricated from 16 gauge M.S. sheet with Powder Coated finish. The control panels should be compatible with H.P. of the motor as under and as per spcifications with automatic star delta starters. (One separate panel to be located in the plant room).
Ingress Protection: IP67 or higher for dust and moisture protection
Mounting: Wall-mounted or floor-standing.
a.One incoming main isolation MCCB TPN of Min. 400 Amps. rating.
b.Fully taped aluminium bus bar of required capacity in a separate bus bar chamber.
Single phasing preventors of suitable rating one for each motor.
c. Rotary type Auto/Manual/ ON/OFF Changeover switches.
d.Ammeter and Voltmeters
e.Colour coded internal wiring from incoming main to bus bar, switch gear, starters, meters indicating lamp etc., complete in all respects. Complete item.
The Outgoing feeders shall utilise the controls / Starters of existing Machinery for the operation. Any defunct starters / controls shall be provided by the intending department free of cost to the Contractor.
The Scope also Includes complete design, fabrication, supply, installation, interconnection, testing, and commissioning of the MCC at site, complete in all respects. | 1 | Cjob | 53,000 ₹53,000 Lowest | 55,000 ₹55,000 |
| 6.00 | Supply/Laying Wiring of Cable 3.5 core Incomer Cable to Control Panel 185 sq mm Alumunium conductor PVC insulated | 30 | M | 1,100 ₹33,000 Lowest | 1,160 ₹34,800 |
| 7.00 | Supply/Laying Wiring of Cable 3.5 core 70 sq mm AL conductor PVC insulated from control Panel to respective Equipment. | 50 | M | 600 ₹30,000 Lowest | 640 ₹32,000 |
| 8.00 | Supply/Laying Wiring of Cable 3.5 core 10 sq mm copper conductor PVC insulated from control Panel to respective Equipment. | 50 | M | 500 ₹25,000 Lowest | 520 ₹26,000 |
| 9.00 | Supply/Laying Wiring of Cable 3.5 core 6 sq mm copper conductor PVC insulated from control Panel to respective Equipment. | 50 | M | 400 ₹20,000 Lowest | 480 ₹24,000 |
Tender Value
₹3.6 L
EMD Value
₹7,120
Closing Date
18 Aug 2025, 2:00 pmClosed
Executive Engineer RandB Mech Div South
Office of Executive Engineer RandB Mech Div South
Strengthening and Modernization by way of creation of Additional Fish rearing space and allied works at Trout Fish Farming Project Kokernag (Mechanical Component by way of Shifting, re-installation and testing, commissioning of Fish Feed Machineries)
2025_PWDJK_283777_1
e-NIT No 16/ RandB/MDSK /2025-26 Dated 09-08-2025
Open Tender
Machineries/ Mechanical Engg Items
Item Rate
14 days
Kokernag
Please refer Tender documents.
5 documents required · 5 mandatory
₹200
Executive Engineer RandB Mech Div South
₹7,120
26 Aug 2025
9 Aug 2025
19 Aug 2025
9 Aug 2025
18 Aug 2025
9 Aug 2025
Amount
Dismantling / Dismassembly works: a. Feeding System Hopper and Feeder: Detach the hopper and feeder units. Label all electrical and mechanical connections. b. Grinding and Mixing Units Grinder: Remove belts, pulleys, and motor connections. Carefully extract the grinding chamber. Mixer: Disconnect the mixer from power sources and supporting structures. Label all inlets and outlets. c. Pelletizing Unit Pellet Mill: Open the mill casing. Remove the ring die and press rollers as per manufacturer guidelines. d. Feeding section of the mill. Disassembling the Belts, hoppers and any other part of the machine which needs to be disassembled for shifting it from ne place to other. The Job also includes the shifting of Machinery lying in the vicinity (Currently not installed) and to be used on the First Floor. The Contractor to visit the site to get acquitained themselves fimiliar with the site conditions.
Transportation / Shifting (Carriage): 1. Equipment and Resources Hydra Crane: Utilize a Hydra crane or any other suitable Machinery with a lifting capacity suitable for your heaviest component. Transport Vehicles: Depending on the size and weight of the components, flatbed trucks / Tractors or trailers may be required for horizontal movement. Lifting Accessories: Ensure the availability of slings, shackles, and spreader bars rated for the loads to be lifted. 2. Loading Procedure Component Inspection: Before lifting, inspect each component for structural integrity to ensure safe handling. Lifting Points Identification: Determine and mark the appropriate lifting points on each component to maintain balance during hoisting. Secure Lifting: Attach slings and shackles securely, ensuring they are free from twists and are appropriately tensioned. Controlled Lifting: Lift components slowly and steadily, maintaining clear communication between the crane operator and ground personnel. 3. Transportation Movement Coordination: Assign a signal person to guide the crane operator, ensuring synchronized movements. Speed Regulation: Maintain a slow and steady pace, not exceeding 2 km/h, to prevent load swinging and ensure safety. Obstacle Management: Have personnel ready to remove any unforeseen obstacles along the path promptly. 4. Unloading and Placement Site Preparation: Ensure the new location is ready to receive the components, with foundations or supports in place as required. Alignment and Positioning: Carefully lower each component into its designated position, making necessary adjustments for alignment. Securing Components: Once placed, secure the components to prevent movement or tipping.
Assembling - Reinstallation of the Machinery at new place. 1.Preliminary Work Site cleaning and preparation for foundation layout. Marking of foundation bolts and layout as per machinery drawings or already taken notes during disassembling. Verification of foundation levels. 2. Mechanical Erection Checking and inspection of machinery. If in case any damage is done to machinery at any point of disassembly and carriage same may be borne by the contractor free pf cost. Positioning of base frames and equipment using chain blocks/cranes. Assembly of subunits (e.g., attaching motor and gearbox to mixer, extruder assembly). Installation of bucket conveyor: Alignment and vertical erection of trunking Fixing head and boot sections Fitting buckets and belt/chain Alignment of machinery and securing on base. Bolting, leveling, and vibration pad placement (if needed). Assembling and levelling of the other miscellineous components of the machinery 3. Electrical Installation Installation of control panels. Cable laying from panels to motors and instruments. Motor termination and earthing. Installation of start/stop switches, emergency cutoffs. Connection of load cells, sensors, and temperature controllers (for extruder/dryer if present).
Testing and Commissioning Dry Run Testing (No Material) Start each machine independently to ensure proper rotation and load-free operation. Run complete line sequentially (without feed). Check vibration levels, abnormal noise, motor temperature rise. Verify interlock logic in the control panel. Greasing of the Motors. Adjust variable speed drives (if used) for conveyors and feeders. Wet Run / Trial Production Load raw materials into feed hopper. Start complete production sequence: check for the whole machine operation and quality of output. Greasing of the Motors. Check for any other problems. Performance Testing Run machine at rated capacity for minimum 4–8 hours continuously. Check for: Overheating of motors. Feed uniformity and output rate (kg/hr or ton/day). Electrical load and energy consumption. Temperature and dwell time in dryer. Dust and emission levels (for environment/safety). Any Consumables / Defunct Items necessary for the Testing and Commissioning of Machinery shall be borne by the Intending Department. The Machinery shall be tested in presence of Officials of the intending department and shall perform to the Satisfication of the Intending Department officials / Engineer in Incharge.
Electrical Works: Electrical Panel Providing and fixing Automatic motor control centres fabricated from 16 gauge M.S. sheet with Powder Coated finish. The control panels should be compatible with H.P. of the motor as under and as per spcifications with automatic star delta starters. (One separate panel to be located in the plant room). Ingress Protection: IP67 or higher for dust and moisture protection Mounting: Wall-mounted or floor-standing. a.One incoming main isolation MCCB TPN of Min. 400 Amps. rating. b.Fully taped aluminium bus bar of required capacity in a separate bus bar chamber. Single phasing preventors of suitable rating one for each motor. c. Rotary type Auto/Manual/ ON/OFF Changeover switches. d.Ammeter and Voltmeters e.Colour coded internal wiring from incoming main to bus bar, switch gear, starters, meters indicating lamp etc., complete in all respects. Complete item. The Outgoing feeders shall utilise the controls / Starters of existing Machinery for the operation. Any defunct starters / controls shall be provided by the intending department free of cost to the Contractor. The Scope also Includes complete design, fabrication, supply, installation, interconnection, testing, and commissioning of the MCC at site, complete in all respects.
Supply/Laying Wiring of Cable 3.5 core Incomer Cable to Control Panel 185 sq mm Alumunium conductor PVC insulated
Supply/Laying Wiring of Cable 3.5 core 70 sq mm AL conductor PVC insulated from control Panel to respective Equipment.
Supply/Laying Wiring of Cable 3.5 core 10 sq mm copper conductor PVC insulated from control Panel to respective Equipment.
Supply/Laying Wiring of Cable 3.5 core 6 sq mm copper conductor PVC insulated from control Panel to respective Equipment.
GOOD LUCK TRADERS (BID ID -2444624)
stage.html
html • 0.03 MB
tech_eval.pdf
fin_eval.pdf
finance_873386.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .