Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹3.4 L
EMD Value
₹6,897
Closing Date
16 May 2024, 5:30 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Sukhoi Engine Division, Koraput
Sukhoi Engine Division, Koraput
Electrification work of 103 Hangar adjacent building for Manufacturing of Su-30 Springs
7001
SNC/23WPR-1075/1
Works
Mig Complex- Sukhoi Eng Divn
₹0
₹6,897
16 May 2024
15 Apr 2024
15 Apr 2024
16 May 2024
Laying and Fixing of one number PVC insulated and PVC sheathed /XLPE power cable of 1.1 kv grade of following size on wall surface as required
3.5CX 240 Sq mm Al. Ar Cable (Clamped with 40X3 mm MS flat Clamp )
3.5CX 50 Sq mm Al. Ar Cable (Clamped with 25X3 mm MS flat Clamp )
4CX 16 Sq mm Al. Ar Cable (Clamped with 1 mm thick mm saddle )
4CX 10 Sq mm Al. Ar Cable (Clamped with 1 mm thick mm saddle )
Supply and Making END termination with brass Compression gland and Aluminium lugs for following size of PVC insulated and PVC sheathed /XLPE Aluminium conductor cable of 1.1 kv grade as required
3.5CX 240 Sq mm Al. Ar Cable (62 mm )
3.5CX 50 Sq mm Al. Ar Cable (35 mm)
4CX 16 Sq mm Al. Ar Cable (28 mm )
4CX 10 Sq mm Al. Ar Cable (25 )
Supply and fixing of 8 way ( 4 +24 ), Double Door Surface /recess mounting ,Vertical type,415 V,TPN MCB Distribution board of sheet steel dust protected,duiy powder painted..inclusive200 A tinned copper busbar,common neutral link,earth bar,din bar for mounting MCBs (but out MCBs and incomer ) as required.
Supply anmd fixing of following rating of MCBs in the existing MCB DB complet with connection, testing and commissioning netc as required.
100 Amp four pole,415 V
32 Amp three pole,415 V
Supply and fixing TP sheet steel enclosure on surface /recess along with 32 Amp 415 V . C curve TP MCB complete with connection, testing and commissioning etc as required .
Supply and fixing of 400 Amp TPN switch Disconnector fuse unit with ISI marked HRC fuses
Supply and fixing of 20 mm dia medium class PVC conduit along with accessories in suirface / recess includiong cutting the wall and making good the same in case of recessed conduit as required
Supply and fixing of 6 module, GI Box along with moduler Base and cover plate for moduler switches in recedd etc as required.
Supply and fixing of 12 module, GI Box along with moduler Base and cover plate for moduler switches in recedd etc as required.
Supply and fixing following moduler sweitch /socket on the existiong moduler plate and switch box including connection but excluding moduler plate etc as required.
5 / 6 A moduler switch
3 pin 5 / 6 A moduler socket
Supply and fixing two modular stepped type electronic fan regulator on the existing moduler plate switch box including connection but excluding moduler plate etc as required
Supply and fixing of 20 A, 240 V SPN industrial type socket outlet with 2 pole and earth. Metal enclosed plug top alongwith 20 A C curve SP MCBs in sheet steel enclosure.on surface or in recess with chained metal cover for the socket outlet and complet with connection,testing and commissioning etc as required.
Supply of following size ,ISI marked ,FRLS PVC insulated, single core copper conductor cable.
1 C X 1.5 sq mm
1 C X 2.5 sq mm
Laying of following size ,ISI marked ,FRLS PVC insulated, single core copper conductor cable.in PVC conduit , surface or recess as required
1 C X 1.5 sq mm
1 C X 2.5 sq mm
Supply, Installatiopn, Testing and commissioning of 1200 mm sweep BEE 5 star rated, Celling fan with BLDC motor ,class of insulation ;B,3 Nos blades,30 cm long down rod,2 nos.canopies, shackless kit,safty rope,copper winding, Power factor not less then 0.9, Service value (CM / M / W )minimum 6.00,Air delivery minimum 210 CUm /Min,350 RPM (tolerence as per IS;374-2019 ), THD less then 10%, remote or electronic regularor unit for speed control and all remaining accessories including safty pin, nut bolt,washer. temperature rise=75 degree C ( max. ).insulation resistsnce more then 2 mega ohm,suitable for 230 V,50 Hz,single phase AC supply, earthing etc. complete as required
Supply of 2 X 20 watt LED tube light fitting with all accessories, Make Bajaj / crompton / philips / wipro
Fixing of 2 X 20 watt LED tube light fitting with all accessories in wall / roof / coloum as required , Make Bajaj / crompton / philips / wipro
Supply and Earthing with GI earth pipe 4.5 meter long. 40 mm dia including accessories. And providing massonry enclosure with cover plate having loking arragement and watering pipe etc, with charcoal / coke & salt as required
Pproviding and fixing of 25 X 5 mm GI strip on surface or in recess for connection etc, as required
Pproviding and fixing of 25 X 5 mm GI strip in 40 mm dia GI pipe from earth electrod including connection with GI nut bolts, spring washer excavation &re-filling etc as required
Sub Total Amount in (Rs)- (A)
I / We hereby quote percentage above (+) or below (-) the Estimated cost - (B)
Sub Total Amount in (Rs)= (A-B)- (C )
GST @ 18.00% in (Rs)- (D)
Grand Total Amount in (Rs)= (C+D)- (E)
Applicable SAC Code
Remarks (If any)
NOTE: (i) : It is a percentage rate tender. Hence the tenderers are required to quote rates on percentage basis i.e. above or below the estimated cost put to tender. (ii) The quoted rates in the bill of quantities are inclusive of all types of taxes, duties levies, fees and charges etc., imposed by Central/ State Govt. and local bodies Compensation Cess, Labour Cess, Custom Duty, royalties and other levies. It shall also include all other costs including loading, un-loading, insurance, transportation, testing and Certification expenses except GST . GST at the prevailing percentage is added in the BOQ at the end. (iii) It is two Bid system.Do not scan the C-Bid and upload at any other place. (iv) Do not scan the C-Bid and upload at any other place. (v) The work is on package basis. (vi)The Contract will be finalized on Total Amount (C+D) quoted basis. (vii). MANDATORY REQUIREMENT: Please mention the firm name in the relevant column.
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
raw.json
RAW_JSON
BOQview.pdf
TENDER_DOCUMENT • 0.22 MB
ENIT.pdf
TENDER_DOCUMENT • 1.18 MB
FormatTurnoverExp.pdf
TENDER_DOCUMENT • 0.15 MB
UndertakingFormat.pdf
TENDER_DOCUMENT • 0.08 MB
EBOQ2.xlsm
TENDER_DOCUMENT • 0.01 MB
NEWGCC.pdf
TENDER_DOCUMENT • 2.92 MB
EPSMandateFormat.pdf
TENDER_DOCUMENT • 0.12 MB
Checklist-SED.pdf
TENDER_DOCUMENT • 0.41 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .