PROVISION OF 700 MTR CHAIN LINK FENCING WITH FIBER SHEET FOR GTO GRND FOR SCN AT JALANDHAR CANTT

Amount

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning,filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm,

M&L for PCC 1:3:6 C2 (40mm aggregate) in walls or retaining walls,any thickness, size or shape including pilasters, buttresses columns, pillars,boundary pillars and posts (including caps and bases)

M&L for MS work hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and untersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts conforming to Fe-290 Gde E-165

M&L for painting steel surfaces of any description, over 10cm in width or girth with two coats of synthetic enamel paint over coat of red oxide primer including preparation of newly or previously untreated surfaces complete all as specified and directed

M&L for Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for ooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips ®

M&L for 2mm thick Fibre glass reinforced translucent plain sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc

S&F Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured)

Supply only Chain link MS galvanisd fencing, any size or type complete all as specified and directed

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and directed

Mild steel bolts. purpose made. with hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut. Exc 30cm long

Demolition of brickwork or stone/ boulder masonry, built in lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles all as specified and directed

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth as in soft/loose soil

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point

M&L for cement concrete type E2, 1:5:10 (40mm graded aggregate in foundations, filling and mass concrete

M&L for brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 all as specified and directed

Rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces finished even smooth without using extra cement

M&L for preparation of newly plastered surfaces of wall and applying two coats of cement base paint over coat of chalk whiting primer complete all as specified and as directed by Engr-in-Charge

in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed

M&L for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete (Fe 410-W Gde 250 E Quality)

JAGDISH KUMAR SEHGAL

NATIONAL BUILDERS

CHOUDHARY AND SONS

UNITED ENGINEERING CORPORATION

M/S Kuldip Construction Co.