RFP Digitalised Museum Bantony Castle

Amount

Artistic Work

Script Writing, VO Artist and Recording: 1) Briefing by the design consultant team as to the design intent, concept and expected outcomes of the Script. 2) Writing of 1st Draft Script, including narration, poem, song etc. where required and as per discussion. 3) Incorporation of feedback towards preparation of the Final Script. 4) Assistance in casting voice artistes. 5) Submission of Final Script. 6) Incorporation of comments/feedback from the client. 7) Presence during shooting and recording. 8) Review of comments/feedback on completed content and incorporation of the same. 9) The script shall be supplied in Hindi, along with an English translation. 10) Voice Over Artist - Celebrity voice over artist, Dialogues writer, Song writer, Music composer, Music director, Studio charges, Background music and sound effects - Surround sound 5.1, Singer, Chorus singer with supporting music instrument.

Interactive content: Design of User Interface and User Experience for Interactive LED Screens, Video Content for Interactive wherever required and User Interface for Interactive Walls complete in all respects as directed by the Engineer in Charge

Projection mapping Programming: Programming/ integration of Projection Mapping show with content, effect etc. including cost of cueing, programming projector and system integration etc.

Medialon Programming: Programming/ integration of System with content, effect etc. including cost of cueing and system integration etc.

Interactive Programming: Programming/ integration of Interactive Screen with content, effect etc. including cost of cueing, system integration etc.

Lighting Programming: Programming/ integration of Lights in different areas of Museum including cost of cueing and system integration etc.

Video Equipment

Supply, Installation, Testing and Commissioning of 8,000 ANSI Lumens or above 1 chip DLP Laser phosphorus projector. Should be: (1920X1200) WUXGA Resolution, Brightness uniformity is 90%. Dynamic Contrast 6000:1 or above, Inputs: SDI, HDMI, DVI-D. Control Ports: RS232 & LAN/RJ45. Operating Temp: 0-40° C, Light Source Lifetime – up to 20,000 hrs. Power Consumption not more than 750W. Features: HD Base T, Backup input, mechanical shutter, DMX compatible, 360° projection, support 4K input, suitable zoom lens with accessories. Projection screen and throw distance as per the direction given by engineer in charge.

Supply, Installation, Testing and Commissioning of the 4 sided holographic box of the size Diameter 5.5 ft x height 6ft . with suitable FHD Display + Media player + Mouse + Hdmi + usb extender Cable + Powerchord + Powder coated Casing complete in all respects and as directed by engineer in charge

Supply, Installation, Testing and Commissioning of the 3d holographic film with more than 97% transmittance complete in all respects and as directed by engineer in charge

Supply, Installation, Testing and commissioning of 65" Interactive Panel, with 400 nits brightness 4K Multi touch interactive display, Up to 10 point touch in PC mode, HDMI X 3 input. HDMI x 1 output, USB 2.0 and 3.0. Control RS232 and LAN. Built in Android 9 with quad core processor having 4GB RAM and 64GB Storage. Having OPS slot with 20W built in speaker, Control button lock, built in quad view 4 OS connect same time wirelessly. Support Windows, Mac, iOS and Android. Should include the push and lock hanging arrangement Complete in all respects and as directed by engineer-in-charge

Supply, Installation , Testing and Commissioning of 24" FHD Ineractive panel duly installed on customized table, Non- Glare display/ Cortex A72 1.7GHz Quad- Core CPU/ 8GB Storage/ Embedded MagicINFO S player to support seamless content playback/ Haze Coating/ HDMI/ HDCP/ USB/ Stereo Mini Jack/ RS232 (in)/ RJ45/ Temperature Sensor, Pivot Display, Clock Battery,Built in Speaker (5W 1ch), IP5x Rating, Wi-Fi/ BT, Rigid 3-layered security system preventing any unauthorized access/ Center IR and built-in Wi-Fi allowing convenient remote device control and management/ Auto Source Switching & Recovery/ EMC ClassB/ Energy Star 8.0, Epeat and 10 Point Touch, complete in all respect and as approved by engineer in charge.

Audio Equipment

Supply, Installation, Testing and Commissioning of Two-way 5.25” speaker with wide 100° x 100° coverage, Frequency Response (+/-3 dB): 85Hz - 17 kHz, Power Rating :Continuous 75 W (300W peak), SPL:116dB, Sensitivity 90 dB, 1W/1m, Impedance: 8 ohms, Transformer Taps : 100V/70V: 30W, 15W, 7.5W, 3.7W 100V: 30W, 15W, 7.5W, High Frequency Driver:.75 In, Crossover Type: 2nd order low-pass, 3rd order high-pass, Outdoor Capability IP-44, Drivers: LF: 1 x 5.25 In, HF: 1 x 0.75 in Safety Agency: ROHS-compliant; Transformer UL Recognized per UL1876, High Impact Polystyrene (HIPS) Enclosure complete in all respect and as directed by Engineer-in-charge.

Supply, Installation, Testing and Commissioning of Eight-channel 125W @ 4Ω Power Amplifier, Sensitivity :1.4 V , Rated Power Output (all channels driven): 125W per CH @ 4 ohms, 125W per CH @ 8 ohms, Signal to Noise Ratio (below rated power 20 Hz to 20 kHz, A-Weighted) 110 dB, THD (full rated power, 20 Hz - 20 kHz) : < 0.05% , Inter modulation Distortion (from 0 dB down to - 30 dB) : < 0.05% , Frequency Response (at 1W, 4/8 ohms) :+/- 0.5 dB, Crosstalk (below rated power) 20 Hz to 1 kHz : > 70 dB , Common Mode Rejection (20 Hz to 1 kHz) >: 55 dB, typically :> 70 dB , Voltage Gain : 27 dB , IEC Power Connector 15A complete in all respect and as directed by Engineer-in-charge.

Supply, Installation, Testing and Commissioning of Eight-channel 125W @ 4Ω Power Amplifier, Sensitivity :1.4 V , Rated Power Output (all channels driven): 125W per CH @ 4 ohms, 125W per CH @ 8 ohms, Signal to Noise Ratio (below rated power 20 Hz to 20 kHz, A-Weighted) 110 dB, THD (full rated power, 20 Hz - 20 kHz) : < 0.05% , Intermodulation Distortion (from 0 dB down to -30 dB) : < 0.05% , Frequency Response (at 1W, 4/8 ohms) :+/- 0.5 dB, Crosstalk (below rated power) 20 Hz to 1 kHz : > 70 dB , Common Mode Rejection (20 Hz to 1 kHz) >: 55 dB, typically :> 70 dB , Voltage Gain : 27 dB , IEC Power Connector 15A complete in all respect and as directed by Engineer-in- charge.

Supply, Installation, Testing and Commissioning of 4x4 Digital Signal Processor, DSP with 4 inputs and 4 outputs, 12 Control Inputs and 6 Logic Outputs for GPIO Integration, 48V phantom power on all analog inputs, THD: <0.01% 20Hz to 20KHz, Crosstalk: <-75dB, Open architecture software configurable, Logic processing power, Should have speech sense engine, Digital Audio Bus to transfer digital audio to Amp and other devices, 2 digital audio bus RJ 45 Port, 1 Ethernet port for Monitoring and configuration, Capable to handle +5V unloaded logic output voltage, Capable to control 3rd party devices with TCP IP and RS 232, Should have 1nos of RS 232 port for integration with control System, Should have Bi-Directional Locate Functionality, Should have 48 or more digital audio Channel Bus, Should have monitoring LED for COM, STAT, ERR and PWR complete in all respect and as directed by Engineer-in-charge.

Supply, Installation, Testing and Commissioning of Surface-Mount Subwoofer, Frequency Range (-10 dB): 32 Hz – 200 Hz, Frequency Response (±3 dB): 50 Hz – 150 Hz, Power Capacity: 100 Watts Continuous Pink Noise (100 hrs), Nominal Sensitivity (2.83V, 1m): 95 dB (near corner), 89 dB (center of wall), Rated Maximum SPL (1m): 115 dB average, 121 dB peak (near corner), 109 dB average, 115 dB peak (center of wall), Nominal Impedance: 8 ohms (in bypass/thru mode), Transformer Taps: 80W, 40W, 20W, (& 10W @ 70V), 8 ohm bypass/thru, 8" LF Driver complete in all respect and as directed by Engineer-in- charge.

Supply, Installation, Testing and Commissioning of Control Room head phone for FOH Monitoring, Professional studio grade closed-back headphones with auto mute technology, Max. Input Power =200 mW, Audio frequency bandwidth=16 - 28000 Hz, Sensitivity headphones =104 dB SPL/V, Should have Detachable cable complete in all respect and as directed by Engineer-in-charge.

Supply, Installation, Testing and Commissioning of 12 x 8 Networked Digital Signal Processor ,DSP with 12 inputs and 8 outputs, 12 Control Inputs and 6 Logic Outputs for GPIO Integration, 48V phantom power on all analog inputs, THD: <0.01% 20Hz to 20KHz, +10dBu output, Crosstalk: <- 75dB, Open architecture software configurable, Separate logic Processing power, 2 digital audio bus RJ 45 Port ,1 Ethernet port for Monitoring and configuration, Capable to handle +5V unloaded logic output voltage , at-least 6, Should have speech sense engine ,Capable to control 3rd party devices with TCP IP and RS 232 ,Should have 1nos of RS 232 port for integration with control System, Should have Bi-Directional Locate Functionality, Should have 48 or more digital audio Channel Bus, Should have monitoring LED for COM, STAT, ERR and PWR complete in all respect and as directed by Engineer-in-charge.

Control Room Equipment

SITC OF Media Server & associated software license and hardware with accessories in Rack mounted media control server should be in 2U with built-in hardware for 2D, 3D mapping, animation as per following details:- The server should have 4 DP 1.4v outputs with each channel supporting 4K. with Dual 10GBP/S ethernet port with 2 USB3 ports, and support genlock, geometry correction, edge blending, color correction and 3D mapping. The server should have low noise cooling system and should support capture from NDI and capture cards with low latency. The server should consist of only industrial grade components, and Kensington security slot. The OS for the server should be Windows 10 enterprise embedded with quick OS recovery built-in, should follow BIS Certification, norms with following minimum specifications. 4096X2160 Resolution @60hz max, 8 GB RAM system memory, Minimum 1TB High Performance SSD drive for storage, Dedicated 6GB GPU. The above System shall be fully loaded with software package & valid license as required and certified from the OEM. (Assembled unit will not be considered)

SITC of userfriendly interface edge blending software support playback of uncompressed video and image, 3D mapping, real time effects & transition, frame lock and capable of taking backup, and should support external commands for projectors and lighting systems if integrated

SITC of control tower PC to manage/monitor/control above mentioned server along with projectors and lightings that shall be with following specifications ;- i7 processor 9940x3.3ghz 19.25 cache 6 core 14 threds, 16 GB RAM, 1TB SSD, 4GB GPU, along with wireless keyboard & Mouse with 24 inch 1920X1080 monitor.

Supplying, installation Testing and Commissioning of All in one embedded Show Controller with all necessary show protocol interfaces to control and synchronize dimmers, lighting desks, video projectors, video servers, sound processors, moving heads, haze machines etc. It should alsoprovides 16 digital inputs, 16 relay outputs, and balanced Time Code input/output with video reference with proper connections etc complete as required.

Supply installation testing and commissioning of 19" Equipment Rack of 36U size with proper connections etc complete as required.

Supplying, installation Testing and Commissioning of 24 Giga port network Switch with OFC Ports i/c connection etc as required.

Supply installation testing and commissioning of 40 KVA Parallel High Performance IGBT/PWM based True-o-line Double Conversion Microprocessor Controlled UPS system along with suitable rating & quantity SMF battery banks for minimum 15 min backup with proper connections etc complete as required.

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/ coke and salt as required.

Supplying and laying 25 mm X 5 mm copper strip at 0.50 meter below ground as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required.(Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm)

Supplying, installation Testing and Commissioning of Fibre distribution box fully loaded for 24 fibers with proper connections etc complete as required.

Supply, installation, testing and commissioning of Analog 8 input 10 Output Soundcard with Audiophile 24-Bit/96 kHz resolution for professional audio quality, supporting Mac* OS X* and Windows 10* or higher 8 state-of-the-art, Midas designed Mic Preamplifiers with +48 V phantom power Digital 18x20 USB2.0 Audio/MIDI Interface with ADAT I/O for recording microphones and instruments Optical I/Os supporting S/PDIF, ADAT and S/MUX formats up to 96 kHz Simultaneous use of all analog, coaxial S/PDIF, optical ADAT and MIDI signals.

Back Lit Graphic Panel made of extruded Aluminum profile, corner connectors, ACP/Bakelite backing sheet for backlit signage with 6500K Osram or Samsung LED modules/strips powered by 12v drivers and UV printed backlit fabric and installed at site, complete in all espects as per approved artwork and as directed by the Consultant / Engineer in Charge

Lighting Equipment

Supplying, installation Testing and Commissioning of DMX splitter 1 in 6 out, 19" Rack Mount i/c connection etc. complete as required.

Supplying, installation Testing and Commissioning of Universal high speed Art Net to USITT DMX 512-A converter having IP 20 rAting and max power consumption of 10watt complete with Power lead to connect to 220Volt supply with proper connections etc. complete as required.

Supplying, installation Testing and Commissioning of DMX controller complete as required.

Supply installation testing and commissioning of DALi Controller for Programming & Scene setting of light fixtures DALi outputs – suitable for DALI HF Ballasts, electronic low voltage transformers and LED fixtures each rated upto 20 A . complete in all respects and as directed by engineer in charge

Supply installation testing and commissioning of Light drivers for light fixtures electronic low voltage transformers and LED fixtures each rated upto 20 A . complete in all respects and as directed by engineer in charge

Supply, Installation, testing and commissioning of Surface mounted downlight with following specification: Wattage: 10W, Dimension : Ø80x95mm, CCT: 3000K, Lumen: 850lm, IP Class : 20 complete in all respect and as directed by Engineer in Charge

Supply, Installation, testing and commissioning of Surface mounted downlight with following specification Wattage: 15W, CCT: 3000K. Lumen: 1275lm, IP Class : 20 complete in all respect and as directed by Engineer in Charge

Supply, Installation, testing and commissioning of Strip light with following specification Wattage: 10W/m, Dimension : W:17.1xH:8mm, CCT: RGBW, Lumen: 850lm/m IP Class : 20 complete in all respect and as directed by Engineer in Charge

Supply, Installation, testing and commissioning of Step light with following specification Wattage: 4W, Dimension : 85x85mm, CCT: 3000K, Lumen: 240lm, IP Class : 65 complete in all respect and as directed by Engineer in Charge

Supply, Installation, testing and commissioning of wall mounted spot light with following specification Wattage: 10W, Dimension:Ø70x113mm,CCT: 3000K, Lumen: 850lm, IP Class : 66 complete in all respect and as directed by Engineer in Charge

Supply, Installation, testing and commissioning of DALI Controlled In ground Up Lights with following specification Wattage: 2W, Dimension : Ø45x65mm, CCT: 3000K, Lumen: 160lm, IP Class : 67, Dali dimmable complete in all respect and as directed by Engineer in Charge

Supply, Installation, testing and commissioning of DMX controlled RGBW Linear slim grazer light with following specification Wattage: 15W/m, Dimension : L:1000xW:25xH:51mm, CCT: RGBW, Lumen: 1275lm/m, IP Class : 66 complete in all respect and as directed by Engineer in Charge

Supply, Installation, testing and commissioning of Recessed downlight(For shelves) with following specification Wattage: 3W, Dimension : Ø58x30mm, CCT: 3000K, Lumen: 240lm, IP Class : 20 complete in all respect and as directed by Engineer in Charge

Electrical and cabling

Supplying and laying of CAT-7, 4 shielded twisted pairs (U/FTP) of 23AWG solid copper conductors, Video & LAN Cable — Low Smoke & Halogen Free for Transmitter & Receivers in existing media i/c connection etc complete as required.

Supplying and laying of Control Cable of various sizes and types in existing media i/c connection etc complete as required.

Supplying, installation Testing and Commissioning of RJ45 Connectors for shielded Cat7 cable i/c connection etc complete as required.

Supplying Laying and fixing of 4x50 sq. mm copper conductor unarmored PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade on wall surface/ pipe cable tray/ in the ground i/c excavation and refilling with proper connections etc as required.

Supply, and laying of DMX Cable in existing media i/c connection & testing etc. complete as required

Supplying, installation Testing and Commissioning of 1x6 amp Switch ,Socket and 1x16 amp Switch, Socket 2 x 5A Switch Outlets with individual On/Off switch of specified make complete with concealed surface GI box (powder coated if surfaced) using modular plate system all inter connecting wiring with proper connections etc complete as required.

Supplying, installation Testing and Commissioning of 2 x 5A Switch + 2x5A Socket Outlets with individual On/Off switch of specified make complete with concealed surface GI box (powder coated if surfaced) using modular plate system all inter connecting wiring with proper connections etc complete as required.

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit with proper connections etc complete as required 3 x 2.5 sqmm

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit with proper connections etc complete as required 3 x 4.0 sqmm

Supply, and laying of 4 x 16 sq mm Copper flexible cable unarmoured cable on surface or in recess / cable tray i/ connection & testing etc complete as required.

Supplying, installation Testing and Commissioning of MS powder coated enclosure,300Amp copper bus bars, and including the following: RYB Phase Indicator, Amp and Volt meter complete in all respect with following accessories etc as required Incoming : 250Amp. 5kA, TPN MCCB - 1No. Outgoing : 125Amp 16kA, 4P MCCB- 2 Nos. [Splitter Panel I/c 1 input and and 2 output complete with all respect as required].

Supplying and fixing of 12 way (4 + 36), Double door surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for outing MCBs (with MCBs and incomer as given below) as required. Incoming : 200Amp. 16kA, 4P MCCB- 2 No. Outgoing : 32Amp. (or 63A) DP 30mA ELCB/RCCB - 6 Nos. 5Amp. to 32Amp. rating, 240/415 V, 10kA, "C" curve, - 30 Nos.

Supplying, installation Testing and Commissioning of 2C x 4 sq mm Copper Speaker Cable in PVC Conduit of specified make, complete with all accessories etc complete as required.

Supplying, installation Testing and Commissioning of 2 x 2.5 sq mm Copper Speaker Cable in PVC Conduit of specified make, complete with all accessories.

Supplying, installation Testing and Commissioning of 12 Core OFC Cable etc complete as required.

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required - 25 mm dia

Supplying and installing following size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required. 300 mm width X 50 mm depth X 1.6 mm thickness

Civil Work

WPC Cladding: Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain white color board for backing of cup boards and bathroom/kitchen cabinets etc. of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel screws etc. all as direction of Engineer- In-Charge. (Note: stainless steel screws shall be paid separately) - 12 mm thickness

Vinyl Print with ACP profile cut layers : Printed vinyl ( self adhesive ) of approved brand and quality, dulyprinted and fixed on 3mm thick ACPprofile cut layers as per approvedartwork and further fixed to existing board surface with required acrylicspacers WPC board and installed, complete in all respects and asdirected by the Engineer in Charge. 100 % opacity, self adhesive, ORTextured finish, ASTM E84 Class 1 or A rating OR ASTM E84 Class 2or B rating, CAN ULC S102.2 (MPI 2611) - Flame Spread Rating: 10 , Smoke Developed Classification: 40.Suitable for Solvent based inkjetprinting, mild/eco solvent inkjet, UV inkjet or Latex inkjet printing.

Making and installation of round shaped dining table of 2.0 mtr dia with 8 no. of seating capacity made up of teak wood along with cutlery set for the projection mapping. Surface should be properly finished and smoothened with no rough patches. Complete in all respects and as directed by engineer in charge

Set of Shimla toy train railway station: A set showcasing the railway station with the a narative and aritistic voice over, telling the story of toy train running in between Kalka- Shimla and its Historic achievement i.e. approximate 111 years old KLK-SML Railway line which was opened for public traffic on 9th Nov. 1903, became UNESCO Declared world Heritage Railway line, when it was conferred Heritage status on 10th July 2008 & listed under “Mountain Railways of India”.

Planning, developing, providing, casting, placing, erecting, fixing, testing, final finishing and commissioning of FRP mannequins (of intended life of minimum 10 years) of required material, shape, size, posture, expression, gesture, design including costume and accessories of all characters on the basis of the design concept / model / prototype / drawings and as per directions of Engineer-in-Charge.

Planning, developing, providing, casting, placing, erecting, fixing, testing, final finishing and commissioning of miniature sculptures models of famous personalities made up of FRP/POP (of intended life of minimum 10 years) of required material, shape, size, posture, expression, gesture, design including costume and accessories of all characters on the basis of the design concept / model / prototype / drawings and as per directions of Engineer-in-Charge.

Providing and fixing frame work for flooring with 6mm mirror, 12mm toughened glass, ply etc. fixed on the floor in a grid pattern with required spacing and necessary welding at junctions, complete, all as per direction of Engineer-in-charge

Jain Expositions Pvt. Ltd (BID ID -440156)

E Factor Experiences Limited (BID ID -446287)

Meroform (India) Pvt. Ltd (BID ID -443682)