PROVN OF CLUB ANTEE ROOM, DRY STORE AND PAN WASH ADJACENT TO THE EXISTING DINING HALL COOK HOUSE AT CATS, NASIK

Amount

Surface dressing n.exc 15cm deep in soft / loose soil complete all as specified and as directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and getting out in hard dense soil complete all as specified and as directed.

Excavating in trenches, n exc 1.5 m wide and exc 1.5 m but not exc 3.0 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and getting out in hard dense soil complete all as specified and as directed.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth for taking out pipe line etc for repairs / laying cables etc and getting out in soft / loose soil complete all as specified and as directed by the Engineer - in - Charge.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick complete all as specified and as directed by the Engineer - in - Charge.

Removal of excavated material [soil] to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed by the Engineer - in - Charge.

Removal of excavated material [soil] to a distance not exceeding 250 m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed by the Engineer - in - Charge.

M&L for Hardcore Broken stone or boulders of gauge n exc. 63mm, deposited, spread and levelled in layers n exc.15cm thick, watered and rammed to a true surface

M&L for TMT bars 10mm dia and over cut to length bent to shape required including cranking bending spirally for hopping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0,9 mm dia or securing with clips quality confiring to Fe-410 complete all as specified and directed.

All as per item No. 9.00 but 5mm dia and over upto and incuding 10mm dia in stirrups tie, spacers and binder complete all as specified and directed.

All as per item No. 9.00 but 6 to 8 mm dia TMT bars.

M&L for form work to sides of concrete foundations,footings bases of coloumns raft and raft beams,sides and soffits (if any) of foundation and plinth beams, and similar work,vertical or to batter for rough finished surface of concrete complete all as specified and directed.

M&L for form work to sides of pillars, posts,struts,piers,columns etc or to batter for rough finished surface of concrete complete all as specified and directed.

M&L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc.

M&L for formwork to chullah hoods, chajjas, troughs and similar items including edges complete all as specified and directed.

M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200 mm thick (Horizontal or sloping)

M&L for Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide.

M&L for Reinforced Ready mixed concrete(Design mix) M-25 grade as in Foundation, including raft footings, foundation beams, plinth beams, bases for column etc.,basement slabs, under reamed piles and mass concrete complete all as specified and as directed.

M&L for Ready mixed concrete(Design mix) M-25 grade as in Beams, cantilevers,lintels, columns pillars,piers, posts, struts,chullah hoods, stair case,arches, domes, vaults,shell roofs, arch ribs,folded plates, slabs,balconies, canopies, deck slabs etc. or in similar articles upto 5th floor level.

M&L for Brick work with fly ash bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L for redering 15 mm thick on fair faces of brickwork or concrete surfaces in CM 1:4.Plaster to be done in two coats(10mm+5mm) final coat with wpc(paid searately) as specified.

M&L for rendering 10 mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished even & smooth without using extra cement.

M&L for 5 mm thick rendering in CM 1:4 on ceiling surfaces.

M&L for Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats on new work over including 3 mm thick wall care putty including preparation of newaly plaster surfaces.

M&L for preparation of newly plastered surfaces two coats of exterior emulsion paint over a coat of primer including preparation of surfaces complete all as specified and directed by Engr-in-charge.

S&F stainless steel curtain rod 25 mm dia best quality as approved by engr-in-charge.

S&F for stainless steel ornamental piece with bore dia 25 mm for free end of curtain rod.

S&Fstainless steel projecting bracket to support curtain rod of size 25 mm.

M&L for 18 to 20mm thick Granite (Telephonic black/Ruby red) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite 18 to 20mm thick. over and including different type shade/colour all as specified and directed.

M&L for Rounding to edges of stone slabs one edge, such as in steps,cooking platform and other similar work.

M&L for Machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete

M&L for moorum filling under floors or paving laid in layers n.exc 15cm thick, spread, levelled and rammed including watering complete all as specified and directed. (Note. Moorum to be broght from outside MoD land.)

M&L for 75 mm thick Plain cement concrete 1:4:8, type D- 2(40mm graded aggregate) as in sub bases to floor.

M&L for PCC 1:4:8 type D-2(using 40 mm graded stone aggt) as in foundations, filling and mass concrete complete all as specified and directed.

M&L for PCC 1:2:4 type B2(using 40 mm graded aggregate) as in surface channels and drains etc complete all as specified and directed.

M&L for PCC 1:2:4, type B0 (using 12.5 graded stone aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed.

M&L for double charged Virified Ceramic tiles 8-10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick backing coat in CM 1:4 complete all as specified and directed.

M&L for Treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured)

M&L for Treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface

M&L for Treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area

Supplying only liquid water proofing compound ISI marked complete all as specified and as directed.

M&L for 75 mm thick cement concrete 1:3:6 type C-1 using 20 mm graded stone aggregate as in plinth protection laid to slope of 1:20 and finishing cement concrete surfaces even and smooth without using extra cement with and including necessary formwork to divide the area in panels finishing exposed edges fair and rounding or chamfering of exposed edges where directed and providing 10 mm thick joints through the thickness of plinth protection duly filled with mastic filling of one part of hot bitumen 85/25 grade and three parts of fine sand complete all as specified and as directed.

S&F Anodised aluminium(minimum 50 micron powder coated) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

S&F Anodised aluminium(minimum 50 micron powder coated) window and ventilator shutters,sliding type (3 track) without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings complete all as specified and directed.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staple or fixed in alumium frames.

S&F 4.00 mm thick Sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane

M&L for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/ Chowkhat of size 65x125 mm(doulbe rebated) comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantand fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge over and including M.S. hold fast/ lugs or SS dash fasteners.

M&L for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/ Chowkhat of size 50x100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantand fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge over and including M.S. hold fast/ lugs or SS dash fasteners.

M&L for Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moistureproof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer -In- Charge.

M&L for Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type modified flush door shutter with provision of fixing wiremesh of 0.56mm nominal dia of wire and average width of aperture 1.00mm (with provision of fixing mosquitto proofing in decorative fashion as directed by engr-in-charge) of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moistureproof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer -In- Charge. Note : - wire mesh door shutter shall be factory made.quoted rate deems to be inclusive of all additional cost for cutting door in size and shape,wastage and wiremesh beading etc.wiremesh shall not be paid separately.

S&F 150 mm size Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S&F 150 mm size Aluminium anodised, barrel tower bolts of ex truded section and fixed complete all as specified and directed.

S&F 300 mm length Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed

S&F Framed work such as grills, gratings(Ornamental and intricate design), etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165

S&F Floor door stopper of brass body and tongue, anodised, with hard drawn steel spring, with over all length of cover plate as 150 mm fixed in floor.

M&L for Tubes, 'medium grade', galvanised, with all fitting; supplied and laid in trenches complete size 20mm.

M&L for Tubes, 'medium grade', galvanised, with all fitting; supplied and laid in trenches complete size 15mm.

Supply and fix Gun metal Globe or Gate valve with iron wheel head, screwed both ends for iron pipe and fixed with required necessary GI fittings complete of size dia 15 mm.

M&L for cutting/drilling existing pipe line & taking branch connection complete incl all necessary GI fiting, jointing materials, earth work etc for 20/25 mm bore.

Supplying and laying of CPVC concealed pipes 20 mm outside dia pipes SDR 11 & Plain CPVC SDR 11 fittings in ceiling/walls/floors complete all as specified.(Internal plumbing shall be concealed).

Supplying and laying of CPVC concealed pipes 25 mm outside dia pipes SDR 11 & Plain CPVC SDR 11 fittings in ceiling/walls/floors complete all as specified.(Internal plumbing shall be concealed).

S&F for Rotational moulded Polythylene water storage tanks of 1000 ltrs capacity,cylindrical vertical double layer with closed top,hoisted and fixed in position including 20 mm dia float valve of brass all as spcified in SSR 2009 Part-I,complete all as specified and directed.Tank shall conform to IS 12701(1996).

S&F for 25 mm dia gun metal,globe or gate valves with iron wheel head,screwed both ends for iron/CPVC pipe complete all as specified and directed.

S&F Stainless steel sink with draining board, made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe, cast iron cantilever brackets, connecting union overall size 915mmx460mm with bowl size 410mm x 330mm x 160mm.SS sink shall be manufactured from Salem stainless steel grade A1S1 305.

M&L for 160mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints laid in floors/trenches as soil pipe complete all as specified and directed.

M&L for 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints laid in floors/trenches as soil pipe complete all as specified and directed.

M&L for 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints laid in floors/trenches as soil pipe complete all as specified and directed.

S&F 110 mm PVC (SWR) junction single (single T) equal or unequal complete all as specified and as directed.

S&F 110mm PVC(SWR) bends any raidius complete all.

S&F 75 mm PVC(SWR) bends any raidius complete all.

M&L for PVC (SWR) floor trap dia of outlet 75mm with grating incl jointing with solvent cement.

S&F PVC gully trap 125/110 mm setting and jointing in solven cement. Complete all as specified and as directed.

M&L for Brass chromium plated bottle traps for wash basins/sink with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed of bore 32 mm complete all as specified and directed.

S&F PVC (SWR) multi floor trap 75 mm size with grating including jointing with solvent cement complete all as specified and as directed.

S&F fancy type chromium plated 15 mm bore Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed

M&L for 10 mm thick cement plaster over roof surfaces in CM 1:3 using liquid waterproofing compound. Note: waterproofing compound shall be measured separately.plastering is to be done when concrete is green.

M&L for Waterproofing on roof surfaces including flashing and junctions of parapet,kerb,facia etc as under:- (a) Applying a uniform coat of oil based primer at 0.70kg/sqm over cement plaster. (b) Laying a layer of APP based polymeric membrance,3mm thick(minimum),weighing not less than 3.60kg/sqm prefabricated fire layer waterproofing membrane reinfocorced with polyester non woven fabric(weighing not less than 160gms/sqm) shall be applied over compatible primer at 0.40litre/sqm of density at 25 degree centigrade 0.87-0.89 kg/litre and viscosity 70-160 cps or cold sticker,application of APP modified membrane shall by torch application.The overlaps shall be minimum 150 mm on the transverse direction and 100 mm on the longitudinal direction. (c) Painting the exposed APP membrane surfaces with two coats of bitumastic aluminium paint. (d) App membrane,Primer,and bitumastic aluminium paint shall be of same brand.

M&L for precast cement concrete 1:2:4,type B-1(using 20 mm graded aggregate) as in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set in cement mortar 1:4 complete all as specified and directed.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete.

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand.

M&L Point wiring with 1.5 Sqmm (22/0.30mm) PVC insulated and unsheathed multistranded copper conductor cable, 1100 volts grade, ISI marked, FRLS type drawn through and including PVC concealed conduit (ISI marked) of adequate size and its accessories with sunk cast iron/pressed steel terminal boxes of size 1.2mm thick, with modular cover plate with frame of adequate required modules for one light or one fan point controlled by one switch incl 1.5 Sqmm (nominal area) copper conductor cable (multistrand), FRLS type, PVC insulated and unsheathed with colour code earth wire connected to common earth dolly at one end and metalic bodies of luminaires/ fan at other end complete all as specified and directed for One light point/ fan point controlled by one, one way swtich. Note:- Unit rate include for cutting chases for conduits and sinking for boxes and making good to wall, floors etc.

All As per Item No. 83.00 above but One 5 Amp 5 pin socket outlet point on same board with other switches including earth wire as specified.

All As per Item No. 83.00 above but with 4.0 Sqmm (36/0.30mm) PVC copper stranded cable FRLS type for one 15 Amp 6 pin socket outlet point including PVC cable 4 Sqmm FRLS type copper stranded conductor as earth wire as specified & connected to commen earth & earth terminals including boards for mounting purposes.

All As per Item No. 83.00 above but on independent board.

Supply and fixing of switch modular type 6 Amps one way AC 230 Volts.

Supply and fixing of switch modular type 16 Amps one way AC 230 Volts.

Supply and fixing of modular type socket 6 Amps 3 pin combined, AC 230 Volts.

Supply and fixing of modular type socket 6/16 Amps 2/3 pin combined, AC 230 Volts.

Supply and fixing of modular type fan regulator, AC 230 Volts.

Supply and fix of ceiling rose surface PVC 50mm dia 3 terminals including PVC mounting block white/ivory finish.

Supply and fixing Ceiling fan complete with blades, down rod electronic regulator and accessories 230 volts, 1200mm sweep, min air delivery 210 CFM with service value 6 BEE five star rated with brushless direct current motor (BLDC) complete including using 1.5 Sqmm FRLS PVC insulated (Unsheathed) 3 core copper conductor cable, 1100V grade complete all as specified and directed.

Supply and fixing of LED 20 Watt inverter LED batten with rod complete with lithium ion battery with charging time 8-10 hours and backup time upto 4 hours mounted on square box of suitable size connecting up with three core flexible copper conductor cable of suitable size from ceiling rose.

Supply and fixing exhaust fan complete with blades, steel body AC single phase 230 volts, 380mm sweep, with service value 6 BEE five star rated complete including using 1.5 Sqmm FRLS PVC insulated (Unsheathed) 3 core copper conductor cable, 1100V grade complete all as specified and directed.

Supply and fixing of 30 Watt invertor LED street light fitting luminaire, energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high efficiency LED as lighting source and lens embedded PC cover having Bottom Opening seperate driver compartment with IP66 protection and impact resistance of IK08. , including connecting up with 2/3 core flexible coppper conductor cable , compete all as specified and directed by Engr-in-Charge.

Supply and fixing distribution board sheet metal enlosure double door shutter type factory made fixed flush with wall or outside on wall surface suitable for mounting isolators & MCB's 240volts, 200 Amp rated bus bar with front openable cover suitable for SP & N 8 ways all as specified & directed.

Supply and fixing MCB SPN 6-32 Amp, 230 Volts, 50 Hz with 10 KA.

Supply and fixing of MCB SP 6-32 Amps, 230 Volts, 50 Hz with 10 KA.

Supply and fixing of invertor LED bulkhead 10 watt 220 volts AC with high efficacy PMMA diffuser soft glare free light complete with drivers, clamps of CP No HLBH-15-10-CW-INV Halonix or equivalent and complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size.

Supply and fixing in replacement of invertor LED round shape 15 watt 220 volts AC recessed type with high efficacy PMMA diffuser soft glare free light complete with drivers, clamps and suitable size as per ground requirement complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size.

Supply and fixing of submain wiring with two single core PVC insulated unsheathed, multistranded flexible copper conductor 1100Volts grade, FRLS type, cables 6 Sqmm drawn through in and including PVC heavy duty concealed conduit including 6 Sqmm 1100Volts grade, FRLS type, PVC insulated unsheathed multi stranded flexible copper conductor cable as continuous earth wire and connecting to common earth terminals complete all as specified and directed. Note :- (i) Two runs of cables and one run of continuous earthing cable drawn in concealed conduit will be measured as one length of sub main. (ii) PVC conduit and its accessories is deem to be included in this item rates. (iii) Unit rate include for cutting chases for sinking for boxes and making good to wall, floors etc.

Supply and laying or fixing or passing through pipe 1100 volts grade heavy duty cable with PVC insulated stranded aluminium condcutor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and over all PVC sheathed of size 25 Sqmm 4 core complete all as specified and directed.

M&L for Double Walled Corrugated DWC HDPE Pipe of outer dia 50mm and innter dia 38mm including 90 degree bends with coupler and rubber ring laid in trenches of size 50 mm suitable for cable protection of size 2 core 10 sqmm to 3.5 core 50 sqmm cable complete all as specified and directed.

M&L for Earthing complete with galvanized steel earth plate electrode 60 cm X 60 cm X 6.3 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of plate not less than 1.5 mtr below ground level connecting to the GI wire 4.0 mm dia, by means nut bolt, nuts, check nuts and washer of the GI Earth wire protected by provision of GI light grade pipe 15 mm, GI light grade 20 mm bore pipe for watering perforated at bottom 1.75 mtr long placed on top edge of earth plate, common salt and charcoal filling, taste point made out of phosphorus bronze with fixing arrangement, funnel, wire mesh and earth work in hard/dense soil, returning filling in and removal of surplus soil to a distance not exceeding than 50 mtr, all as per electric plate No 3 of SSR Part I 2009 and connection to earth test point all as specified incl testing on completion”.

Abhiraj Enterprises (BID ID -3275167)

M/S SAMEER SUBHASH PATANI (BID ID -3274265)

Vinod Enterprises (BID ID -3274884)

SHILPVED (BID ID -3278156)

MANOVANDANA CONSTRUCTION (BID ID -3273789)

BHUSHAN BHIMRAO PATIL (BID ID -3274820)

SVT ENGINEERS AND CONTRACTOR. (BID ID -3271796)