Retrofitting Providing to WSS Baloh Kuddi Paroch in Tehsil Bhattiyat Distt Chamba HP SH Co RCC Intake Chamber and PF barbed wire fencing around the intake Chamber

Excavation in foundations trenches etc. in earth work in all kinds of soil such as pick work, jumper work, blasting work in hard/ soft rocks, chiseling / wedging out of hard /soft rock including dewatering in saturated soil up to all leads and lifts stacking the excavated soil / materials not more than 3 meters clear from the edge of excavation and then returning the stacked soil in 15 centimeter layers when required into plinths side of foundations etc., consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth within all leads and lifts as per the direction of Engineer-in -Charge.

Providing and laying cement concrete 1:3:6 (1 cement : 3 sand: 6 graded stone aggregate 40 mm nominal size) and curing complete excluding cost of form work in foundation and plinth within all leads and lifts as per the direction of Engineer-in-Charge.

Providing and laying cement concrete work 1 : 1. 50 : 3 ( 1 cement : 1.50 sand: 3 graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in:-

Foundations, footings bases of columns and the like mass concrete within all leads and lifts as per direction of Engineer-in-Charge.

In Walls (any thickness but not exceeding 0.10 meter thickness) attached pilasters, buttresses, plinth and string courses etc. from top of foundation level up to floor two level within all leads and lifts as per the direction of Engineer-in-Charge.

Providing and laying cement concrete work 1 : 2 :4 ( 1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) and curing complete excluding the cost of form work and reinforcement for reinforced concrete work In suspended floor roofs, landing & shelves and their support balconies, beams, girders, resumes and cantilever up to floor two level within all leads and lifts as per the direction of Engineer-in-Charge.

Providing form work with steel plates 3.15 millimeter thick welding with angle iron in frame 30x30x5 millimeter, so as to give fair finish including centering, shuttering strutting and propping etc. with wooden battens and bellies, height of propping and centering below supporting floor to ceiling not exceeding 4 meters and removal of the same for in-situ-reinforced concrete and plain concrete work in:-

Flat surfaces such as soffits of suspended floors, roofs, landing and the like floor etc. up to 200 millimeters in thickness within all leads and lifts as per the direction of Engineer -in- Charge.

Vertical surfaces such as walls (any thickness) partitions and the like including attached pilasters, buttresses, plinth and string courses and the like within all leads and lifts as per the direction of Engineer-in Charge.

Providing Tor steel reinforcement for RCC.work including bending, binding and placing in position complete upto floor two level within all leads and lifts as per the direction of Engineer-in- Charge.