Electrical renovation of different laboratories, office rooms, power supply arrangement to new equipments and other allied works at CSIR-IMMT, Bhubaneswar-751013

Amount

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq mm ISI marked FRLS PVC insulated single core copper conductor (Finolex/Poly-Cab/RR/KEI ) cable in surface/ recessed PVC conduit medium ( AKG/Kinjal/Polycab) with piano type switch, phenolic laminated sheet, suitable size M.S. box incorporated with Neutral & Earth link & earthing the point with 1.5 sq mm green colour FRLS PVC insulated single core copper conductor cable etc as required. Neutral & Earth wire to come to Switch Box along with phase as per wiring system etc. Group – C

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq mm (Finolex/ Poly-Cab/RR / KEI make) ISI marked FRLS PVC insulated single core copper conductor cable in surface/ recessed PVC conduit medium class (Kinjal/ AKG /Polycab make) with modular type 5A switch, modular base & cover plate on suitable size modular type metal box (Legrand myrius /schneider clipsal/anchor woods) make incorporated with Neutral & Earth link & earthing the point with 1.5 sq mm FRLS PVC insulated single core copper conductor cable etc as required. Group – C

Supply and fixing 5/6 amps. piano type switch ( Anchor/Great white/Havells) on the existing switch box/cover including connections etc. as required.

Supply and fixing 15/16 amps. piano type switch (Anchor/Great white/Havells) on the existing switch box/cover including connections etc. as required.

Supply and fixing 5/6 amps. Socket (Anchor/Great white/Havells) outlet on the existing switch box/cover including connections etc. as required.

Supply and fixing 15/16 amps. Socket outlet (Anchor/Great white/Havells) on the existing switch box/cover including connections etc. as required.

Supply and fixing 5/6 amps.modular type (1 module)switch on the existing modular plate & switch box including connections etc. as required. (Legrand myrius /schneider clipsal/anchor woods) make

Supply and fixing15/16 amps.modular type (1 module) switch on the existing modular plate & switch box including connections etc. as required. (Legrand myrius /schneider clipsal/anchor woods) make

Supply and fixing 5/6 amps.modular type socket (2 module) on the existing modular plate & switch box including connections etc. as required. (Legrand myrius /schneider clipsal/anchor woods) make

Supply and fixing 5 pin, 15/16 amps.modular (2 module) type socket on the existing modular plate & switch box including connections etc. as required. (Legrand myrius /schneider clipsal/anchor woods) make

Supply & fixing of modular type RJ-11 telephone socket in the existing modular box for telephone connection including connection etc as required. Legrand myrius /schneider clipsal/anchor woods make.

Supply & fixing of modular type RJ-45 internet socket in the existing modular box for telephone connection including connection etc as required. Legrand myrius /schneider clipsal/anchor woods make.

Supplying and fixing Modular stepped type electronic fan regulator, 2 module, 120W in the existing modular switch box including connection etc as required. Legrand myrius /schneider clipsal/anchor woods make

Supplying and fixing Flush type Rotary Step 120/280 volt Fan regulator on the existing switch box/cover including connection etc as required. Anchor/Great white/Havells make.

Supply and fixing of 1 or 2 module, modular base & cover plate & modular type metal box (GI) on surface or in recess etc. as required. (Legrand myrius /schneider clipsal/anchor woods) make

Supply and fixing of 6 module, modular base & cover plate & modular type metal box (GI) on surface or in recess etc. as required. (Legrand myrius /schneider clipsal/anchor woods) make

Supply and fixing of 12 module, modular base & cover plate & modular type metal box (GI) on surface or in recess etc. as required. (Legrand myrius /schneider clipsal/anchor woods) make

Supplying and fixing of 5amp ceiling rose on the existing junction box/wooden block including connections etc. as required.

Supply and fixing extra down rod of 20cm length GI pipe , 15mm dia (heavy gauge) including painting etc as required.

Supplying & fixing the louvers/shutters and bird protection net complete with frame, up to size of 380 mm sweep exhaust fans etc as required.

Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, "C" curve including connections, painting etc. as required.

Supply and fixing metal box of 180 mm x 100 mm x 60 mm deep on surface or in recess with suitable size of phenolic laminated sheet cover in the front including painting etc. as required.

Supply and fixing metal box of 200 mm x 300 mm x60 mm deep on surface or in recess with suitable size of phenolic laminated sheet cover in the front including painting etc. as required.

Supply and fixing metal box of 200 mm x 300 mm x100 mm deep (For AC starter enclosure) on surface or in recess with suitable size of phenolic laminated sheet cover in the front including painting etc. as required.

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for light/ power plug with 4X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 2 Nos. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Supplying and drawing 3 x 1.5 sq mm of FRLS PVC (Finolex/ Poly-Cab/RR / KEI make) insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit/ Trunking as required.

Supplying and drawing 3 x 4 sq mm of FRLS PVC (Finolex/ Poly-Cab/RR / KEI make) insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit/ Trunking as required.

Supplying and drawing 3 x 6 sq mm of FRLS PVC (Finolex/ Poly-Cab/RR / KEI make) insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit/ Trunking as required.

Supplying and drawing 6 x 10 sq mm of FRLS PVC (Finolex/ Poly-Cab/RR / KEI make) insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit/ Trunking as required.

Supplying and drawing of 2pair 0.5 sqmm FR PVC insulated annealed copper conductor, unarmoured telephone cable in the existing surface/ recessed steel/ PVC conduit as required

Supplying and fixing of 20 mm dia PVC conduit in surface/recessed PVC conduit medium (AKG/Kinjal/Polycab) including cutting the wall & making good the same in case of recessed conduit etc. as required.

Supplying and fixing of 25 mm dia PVC conduit in surface/recessed PVC conduit medium (AKG/Kinjal/Polycab) including cutting the wall & making good the same in case of recessed conduit etc. as required.

Supplying and drawing of UTP 4pair CAT-6 LAN cable in the existing surface/ recessed steel/ PVC conduit as required

Supplying and fixing of 6 way, single pole and neutral, sheet steel,double door MCB distribution board, 240 volts, on surface/recess, complete with terminal blocks, duly prewired with suitable size FR PVC insulated copper conducter up to terminal blocks, tinned copper busbar, neutral busbar, earth bar, din bar, hinged gland plate, interconnections,. including painting, earthing etc. as rquired. Legrand/Hager/Siemens/ C &S make

Supplying and fixing of 8 way, single pole and neutral, sheet steel,double door MCB distribution board, 240 volts, on surface/recess, complete with terminal blocks, duly prewired with suitable size FR PVC insulated copper conducter up to terminal blocks, tinned copper busbar, neutral busbar, earth bar, din bar, hinged gland plate, interconnections,. including painting, earthing etc. as rquired. Legrand/Hager/Siemens/ C &S make

Supplying and fixing of 12 way, single pole and neutral, sheet steel,double door MCB distribution board, 240 volts, on surface/recess, complete with terminal blocks, duly prewired with suitable size FR PVC insulated copper conducter up to terminal blocks, tinned copper busbar, neutral busbar, earth bar, din bar, hinged gland plate, interconnections,. including painting, earthing etc. as rquired. Legrand/Hager/Siemens/ C &S make

Supplying and fixing of 4 (4+12) way, Double Door, three pole and neutral, sheet steel, MCB distribution board , 415 volts, on surface/recess, complete with terminal blocks, duly prewired with suitable size FR PVC insulated copper conducter up to terminal blocks, tinned copper busbar, neutral busbar, earth bar, din bar, detachable gland plate, interconnections,. including painting, earthing etc. as rquired. Legrand/Hager/Siemens/ C &S make.

Supplying and fixing of single pole 6 to 32 amps rating, 240 volts MCB (C series) of Legrand/Hager/Siemens/ C &S make in the existing MCB DB complete with connections, testing and commsissioning etc. as requried.

Supplying and fixing 63amp, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. Legrand/Hager/Siemens/ C &S make

Supplying and fixing 63amp, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. Legrand/Hager/Siemens/ C &S make

Supplying and fixing DP sheet steel enclosure on surface/ recess along with 32 A, 240 V "C" curve DP MCB complete with connections, testing and commissioning etc. as required. Legrand/Hager/Siemens/ C &S make

Supplying and fixing FP sheet steel enclosure on surface/ recess along with 32 A, 415 V "C" curve FP MCB complete with connections, testing and commissioning etc. as required. Legrand/Hager/Siemens/ C &S make

Supplying and fixing 20 amps, 240 volts, SPN, industrial type socket outlet, with 2 pole and earth metal enclosed plug top alongwith 20 amps. C-series, SP MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet, and complete with connections, testing and commissioning etc. as required. Legrand/Hager/Siemens/ C &S make

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Supplying and laying 25mm x 5mm GI strip at 0.50 mtr below ground as earth strip from earth electrode including connection with brass , nut, bolt, spring, washer exacavation and refilling etc. as required

Providing and fixing 25mm x 5 mm GI strip on surface or in recess for connections etc. as required.

Providing and fixing 4 mm dia copper wire on surface or in recess or in existing pipe along with existing cable for loop earthing etc as required.

Supplying and making end termination with brass compression gland and aluminium lugs for 3.5 core x 70 sq mm size of PVC insulated armoured and PVC sheathed /XLPE aluminium conductor cable of 1.1 KV grade as required.

Supplying and making end termination with brass compression gland and aluminium lugs for 4 core x 10sq mm size of PVC insulated armoured and PVC sheathed /XLPE aluminium conductor cable of 1.1 KV grade as required.

Supplying and fixing of 32 mm dia X 2.00 metres long G.I. pipe (medium class) bracket for mounting of street light fitting including bending the pipe to the required shape, 2 nos 40 mm X 3 mm flat iron clamps with nuts, bolts and washer, painting the flat iron with primer and finish paint etc. as required.

Supplying and laying of 63 mm dia (OD-63 mm & ID-51 mm nominal) size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required.

Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC)Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. Suitable for operation on Electronic regulator unit for speed control. (Havells / Crompton energion riviera or similar model as approved by dept)

Supplying, installation, testing and commissioning of indoor type wall surface electrical panel made out of 2 mm thickness of metallic sheet steel of tentative panel size 0.6mtr height & 0.3 mtr width (or as approved), including supplying, installation & internal wiring of following mountings complete as required, duly acid treated for derusting, primered and painted with powder coating of approved shade as per engineer in charge. (Manufacturing will be done only in CPRI approved factories) a) Incommer:- One number 125 A, 36KA, FPMCCB with rotary handle SIEMENS / L & T / C & S/ Legrand make b) One number bus-bar chamber comprising four strips (20 mm x 5 mm or equivalent, 100% neutral ) copper bus-bar of suitable length mounted on insulator etc as required

Supplying, installation, testing and commissioning of indoor type floor mounted , cubicle type, compartmentalized electrical panel made out of 2 mm thickness of metallic sheet steel of tentative panel size 1.2mtr height & 0.9 mtr width (or as approved), including supplying, installation & internal wiring of following mountings, to be mounted on a metalic structure made out of required size MS angle & frame complete as required,duly acid treated for derusting, primered and painted with powder coating of approved shade as per drawing approved by engineer in charge. (Manufacturing will be done only in CPRI approved factories) a) Incommer:- One number 200 A, 36KA, FPMCCB with rotary handle SIEMENS / L & T / C & S/ Legrand make b) Outgoing:- Three numbers of 125 A, 36KA, FPMCCB with rotary handle SIEMENS / L & T / C & S/ Legrand make c) Outgoing:- Four numbers of 32 A four Pole, Cseries, MCB SIEMENS / L & T / C & S/ Legrand make d) One number bus-bar chamber comprising four strips (30mm x 5 mm or equivalent , 100% neutral ) copper bus-bar of suitable length mounted on insulator etc as required

Supplying, installation, testing and commissioning of outdoor type, double door floor mounted , cubicle type, compartmentalized electrical panel made out of 2 mm thickness of metallic sheet steel of tentative panel size 0.7 mtr height & 1.1 mtr width (or as approved), including supplying, installation & internal wiring of following mountings, to be mounted on a metalic structure made out of required size MS angle & frame complete as required,duly acid treated for derusting, primered and painted with powder coating of approved shade as per drawing approved by engineer in charge. (Manufacturing will be done only in CPRI approved factories) a) Incommer 1:- One number 125 A, 36KA, FPMCCB with rotary handle SIEMENS / L & T / C & S/ Legrand make b) Incommer 2:- One number 125 A, 36KA, FPMCCB with rotary handle SIEMENS / L & T / C & S/ Legrand make c) Outgoing:- Four numbers of 63 A four Pole, Cseries, MCB SIEMENS / L & T / C & S/ Legrand make d) Outgoing:- Four numbers of 63 A double Pole, Cseries, MCB SIEMENS / L & T / C & S/ Legrand make e)Two number bus-bar chamber comprising four strips in each chamber (25 mm x 5 mm or equivalent , 100% neutral ) copper bus-bar of suitable length mounted on insulator etc as required

S/I/T/C of outdoor type Street Light Timer Box (outdoor type, double door, 600mm * 400mm * 300mm size , made out of metallic sheet steel with powder coating ) alongwith Digital type programmable Time switch (GEC/L& T make), One no 32 AMP (AC3) 3P power contactor (MNX32), DP 32amp MCB C-series -2 no, 10amp SP MCB C-series - 4nos. Auto/manual toggle switch, one no LED ON Indicator & complete wiring etc as per drawing approved by engineer in charge to be mounted on a metalic structure made out of required size MS angle & frame / Civil pedastal work etc complete as required.

S/I/T/C of outdoor type Street Light Timer Box (outdoor type, double door, 500mm * 400mm * 300mm size , made out of metallic sheet steel with powder coating ) alongwith Digital type programmable Time switch (GEC/L& T make), One no 70 AMP (AC3) 3P power contactor (MNX70), FP 63amp MCB C-series -1 no, 32amp SP MCB C-series - 6nos. Auto/manual toggle switch, one no LED ON Indicator & complete wiring etc as per drawing approved by engineer in charge to be mounted on a metalic structure made out of required size MS angle & frame / Civil pedastal work etc complete as required.

Supplying and fixing four pole changeover switch of 63amp, with rotary handle, fuse mounting kit & three numbers 63 amp HRC fuse in the existing panel complete with connections, testing and commissioning etc. as required. L & T /Siemens/ C &S make

Supplying and fixing four pole changeover switch of 160 amp, with rotary handle, fuse mounting kit & three numbers 250 amp HRC fuse in the existing panel complete with connections, testing and commissioning etc. as required. L & T /Siemens/ C &S make

Supplying, installation, testing and commssioning of 400 mm sweep pedastal fan (metal body) with inbuilt regulator of Havells /Crompton / Almonard make

Supplying, installation, testing and commssioning of 400 mm sweep wall fan with inbuilt regulator of Havells /Crompton / Almonard make

Supplying, installation, of Heavy Duty exhaust fan of 380 mm sweep of ( Almonard / Havells/ Crompton make) in the existinge wall, including making the damage good, connection, testing, commissioning etc as required.

Supplying, installation, of light duty fan of 250 mm sweep, PVC body , (Almonard / Havells /Crompton make ) in the existinge wall, including making the damage good, connection, testing, commissioning etc as required.

Supplying, installation, of Heavy duty fan of 300 mm sweep , (Almonard / Havells /Crompton make ) in the existinge wall, including making the damage good, connection, testing, commissioning etc as required.

Supplying & installation, testing and commissioning of prewired round LED fitting of 2000 lumen output not more than 20watt, (Philips / Klite or as approved) with all accessories etc. including connections with 1.5 sq mm PVC insulated, copper conductor etc.as required.

Supplying & installation, testing and commissioning of prewired recessed mounting downlighter square fitting, 2ft x 2 ft of 3000 lumen output, not more than 30watt , (Philips / Klite or as approved) with all accessories etc. including connections with 1.5 sq mm PVC insulated, copper conductor etc.as required.

Supply, installation, testing and commissioning of prewired street light LED fitting of 6500 lumen, not more than 65watt (Philips / Klite or as approved ) with all accessories etc. including connections with 1.5 sq mm PVC insulated, copper conductor etc. as required.

Supplying & installation, testing and commissioning of prewired baten fitting/LED channel (box type) suitable for one number LED tube light of (Philips / Klite or as approved) with all accessories and 1 no 2000 lumen led tube etc. directly on wall including connections with 1.5 sq mm PVC insulated, copper conductor, single core cable etc.as required.

Supplying & installation, testing and commissioning of prewired baten fitting/LED channel (box type) suitable for two numbers LED tube light of (Philips / Klite or as approved) with all accessories and 2 nos 2000 lumen led tube etc. directly on wall including connections with 1.5 sq mm PVC insulated, copper conductor, single core cable etc.as required.

Supplying & installation, testing and commissioning of prewired recessed mounting downlighter square fitting, (suitable for 280mm x 280mm or similar size cutout) of 2400 lumen output, not more than 24watt , with all accessories etc in existing false ceiling, including connections with 1.5 sq mm PVC insulated, copper conductor etc.as required.

Supply, installation, testing and commissioning of 100 watt LED flood light, (Philips / KLite or as approved make) with all accessories etc. as required.

Supplying and fixing of 3 mm thick phenolic laminated sheet including cutting for switch, socket etc. on the existing metal switch board etc as required.

Supplying and fixing FP sheet steel enclosure on surface/ recess complete with connections, testing and commissioning etc. as required. Legrand/Hager/Siemens/ C &S make

Supplying and installation of starter for Air-conditioner, 3-phase DOL starter L&T /Siemens/ C &S make, coil voltage-230 ,Volt 50HZ. & O/L range 9-14 Amps on existing M.S. Box, etc as required .

Supplying & laying of DLP Trunking System (100mm*50mm) Polyvinyl Chloride (PVC),white colour. (Make- Legrand/ AKG / Maruti) with following accessories: 100X50mm Body & Cover etc as required as per site requirement

Supplying and laying of one number PVC / XLPE insulated armoured and PVC sheathed AL. conductor power cable of 1.1 KV grade POLYCAB / Finolex/ KEI make armoured cable as approved by dept. Engg. of 4 core x 10 sq mm size in the open duct / existing trench /pipe etc. as required.

Supplying and laying of one number PVC / XLPE insulated armoured and PVC sheathed AL. conductor power cable of 1.1 KV grade POLYCAB / Finolex/ KEI make armoured cable as approved by dept. Engg. of 3 core x 6 sq mm size in the open duct / existing trench /pipe etc. as required.

Supplying and laying of one number PVC / XLPE insulated armoured and PVC sheathed AL. conductor power cable of 1.1 KV grade POLYCAB / Finolex/ KEI make armoured cable as approved by dept. Engg. of 3.5 core x 70 sq mm size in the open duct / existing trench /pipe etc. as required.

Supplying and laying of one number PVC / XLPE insulated armoured and PVC sheathed AL. conductor power cable of 1.1 KV grade POLYCAB / Finolex/ KEI make armoured cable as approved by dept. Engg. of 3.5 core x 70 sq mm size (clamped with 25 *3 ms flat clamp) on wall surface etc. as required.