Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹92.2 LAccepted-AOC | L1 | Accepted-AOC QUOTED AMOUNT LOWEST | |
| 2 | L2₹99.3 L+₹7.1 L (7.69%)Rejected-Finance A 212B GALI NO 1 SHAKARPUR DELHI 110092 | DELHI | EAST DELHI | DELHI | 110092 | L2 | Rejected-Finance QUOTED AMOUNT NOT LOWEST | |
| 3 | L3₹1.0 Cr+₹10.5 L (11.4%)Rejected-Finance A 26TH FLOOR PLATINUM PLAZA DISTRICT BHOPAL M P | BHOPAL | BHOPAL | MADHYA PRADESH | 462001 | L3 | Rejected-Finance QUOTED AMOUNT NOT LOWEST | |
| 4 | L4₹1.0 Cr+₹12.5 L (13.5%)Rejected-Finance HOUSE NO 86 SUJEET VERMA RAJEEV NAGAR PH 3 DELHI NORTH WEST DELHI DELHI 110086 UDYAM DL 06 0117122 | NORTH WEST DELHI | DELHI | 110086 | L4 | Rejected-Finance QUOTED AMOUNT NOT LOWEST | |
| 5 | L5₹1.1 Cr+₹13.6 L (14.8%)Rejected-Finance C 9 53 IIND FLOOR SECTOR 08 ROHINI DELHI 110085 | DELHI | NORTH WEST DELHI | DELHI | 110085 | L5 | Rejected-Finance QUOTED AMOUNT NOT LOWEST |
Tender Value
₹1.5 Cr
EMD Value
₹2.2 L
Closing Date
5 Mar 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE DELHI CANTT
HQ CWE DELHI CANTT
SPL REPAIR TO BLDG NO T 21 AND P 07 OFFICER LIVING ACCN AT BASE HOSP UNDER GE EAST DELHI CANTT 10
2024_MES_640839_1
CWE/D-30/2023-24
Open Tender
Civil Works
Item Rate
270 days
DELHI CANTT
AS PER NIT
7 documents required · 7 mandatory
₹1,000
GE EAST DELHI CANTT
₹2.2 L
Yes
9 Apr 2024
6 Feb 2024
6 Mar 2024
6 Feb 2024
5 Mar 2024
27 Feb 2024
Amount
Taking down of chowkhat or frame (without taking off shutter from frame) area not exc 1.50 Sqm each including builder hardware fitting complete all as specified and as directed.
All as per item No 01 here in Before but area exc 1.50 Sqm & not exc 4.00 Sqm each complete all as specified and as directed.
M&L for 18 to 20 mm thick of approved shade granite stone (Zed Balck) (superior Quality) slab (table rubbed and polished as in cupboard shelves,cooking platform, corner shelf in bath room, door/Window jam etc and exposed edges rounded or chamfered as directed, set, jointed and pointed in mortar & over & including cement screed base 20mm thick in CM 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite slab including moulding all as directed by Engr-in-Charge.
S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm one side prelaminated and other side plain colour PVC sheet & edges will be painted to match with prelaminated sheet reinforced with M.S. Square tube, suppling & fixed with screw/plugs to brick walls complete as per specification & drawing. Make Black Cobra or equivalent as per approved make list.
S&F Factory made Solid PVC Moulded Door Shutter 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm prelam PVC Sheet on back face, supplying & fixing in frame at site as per specification & drawing, supplying & fixing in the frame at site as per specification & drawing complete all as specified and as directed. Make Black Cobra or equivalent as per approved make list.
S&F Factory made single extruded WPC (Wood Polymer Composite) solid coloured Decorative type flush shutter of 30 mm thick size comprising of virgin polymer of K velue 58-60 (Suspemtion Grade ), Clcium carbonate and Natural fibers (Wood power/rice husk/weat husk) and non toxic additives (Meximum toxicity index of 12 for 100 grm) having minimum density of 650 Kg/Cum and screw withdrawal strangth 50 N / mm modulus of elasticity 850 N/mm sqr and resistence to spread of frame of class A category with property of being termite/ borer proof, water / moisture proof and fire retardant WPC to be laminated with PVC foil of min 14 micronsthic of approved design and fixing with stainless stell butt hinges of required size fixing in frame at site as per specification & drawing complete all as specified and directed. Make Black Cobra or equivalent as per approved make list.
S&F 30mm thick " FACTORY MADE WIRE MESH SOLID WPC DOOR SHUTTER consisting of Density 650 Kg /Cbm Manufactured by an ISO-9001-2015 certified Company , Door to be panelled with SS mosquito Mesh and XTN aluminium Mesh for additional strength and safety purpose. (confirming as per IS:4020). The door should be water proof, termite proof, fire retardant and having screw holding capacity. Door to be fixed to frame with 3 nos. M.S powder coated butt hinges size 100mm*25mm*2mm and 32mm long steel screws drilled suitable to pass through both the walls of the M.S tube.Other hardwares should be fixed with 19*6mm size steel screws etc. Complete as per direction of Engineer-in -charge, manufacturer's specification & drawings. Make Black Cobra or equivalent as per approved make list.
S&F powder coated aluminium of various section as required for frame of door/ windown/ventilators etc with one or more rebates including jointing cleats for fixing etc complete all as specified and directed.
S&F powder coated aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, powder coated aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21, 75 mm long (2Nos.) suitable handle (2 No) complete all as specified
S&F powder coated aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified
S & F powder coated aluminium anodised section 40 x 44mm x14 gauge for aluminium partition wall in wall in panel 1m x1m covered with 5mm thick plain/frosted tinted glass on top half portion and 5 mm thick Aluminium Composite panel fixed in half bottom portion complete all as specfied and directed.
S&F aluminium grill with and including suitable aluminium anodised frame F/H section as requird manufactured by M/S Decogrill as per design No DG- 104 or equivatent as per approved make list, 7.5 mm thick all as specified and as directed by Engr- in- charge.
S&F sheet glass 5 mm thick ordinary quality fixed with Aluminium beads in Sqm Exc 0.50 Sqm but Not exc 1.00 Sqm in each panes.
M&L Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples or wooden/ Aluminium beadding all as directed.
Supply and fabrication & fixing of Modular wardrobe,cupboards, cabinets, drawers , shelfs, vanity , dressing table including shutters ( depth of 45 Cm up to 70 Cm) etc , all front side, bottom, top, two sides and partions etc made out of 15-18 mm thick HDHMR board and back side made out of 8 - 10 mm thick HDHMR board (Action tesa or equivalent ) with machine pressed 0.5 to 0.8 mm thick fabric/glossy colour laminate on all exposed front side and other sides decorative laminations . All exposed edges of boards with machine pressed edge band 0.8mm from rehau Germanetc (colour of laminates , design & paterns of partations/ etc as approved by GE) including all accessories of fittings - Auto/soft closing hinges for shutters , C/J gola profile for handel less, telescopic channels 18'' / 20'' long , rollers for smooths sliding of drawers, etc as required complete all as specified and as directed. (Note : Overall net size front side including frame will be measured for payment purpose)
S&F hydraulic door hinges, fancy type, stainless steel, fixed to cup board and similar items complete all as specified and directed.
S&F MS rolled section for Framed work as in doors, Chowkhats or gates of angle or other section with gusset plates, rails, braces,and hold fast etc., complete all as specified and directed.(Fe 290 gde E 165)
S&F 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.
S&F 200mm long Aluminum anodised barrel tower bolt of extruded section complete all as specified and directed.
S&F 150mm long aluminum handles, cast type anodised complete all as specified and directed.
S&F 200 mm long Stainless steel handles,Decorative type complete all as specified and directed.
S&F 100 mm long butt hinges medium weight cold rolled mild steel complete all as specified and directed.
S&F 140mm long floor door stopper fency type of Aluminum alloy body and tongue, anodised with hand drawn steel spring fixed in floor.
Demolition of brick work built in cement mortar of any description and including PCC Coping etc and disposal of all debris out side Mod land complete all as specified and directed.
M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius in CM 1:6 complete all as specified and directed.
M&L for brick work with sub class 'B' bricks straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed.
M & L PCC 1:4:8 type D-2 (using 40mm graded stone aggregate ), as in foundation, filling & mass concrete, rough finished comlete all as specified and as directed by Engg-in-Charge.
Excavating in trenches n.exc 1.5 m wide and n.exc 1.5 m in depth for foundations of walls and not exc 10 Sqm on plan and n.exc 1.5m in soft soil complete.
Returning and filling in soil incl levelling, watering and well rammingin layers n. exc 25cm in fdn trenches.
Removing excavated soil including disposal of all debris exc 1.5 KMtr not exc 5 Km outside of MOD land complete all as specifed & directed.
Demolition of unreinforced cement concrete in ground floors and paving N exc 15cm thickness( below or above ground level) including disposal of all debris outside MoD land complete all as specified and directed.
M&L for 25 mm thick PCC 1:2:4, type B-1 (using 20mm graded stone aggregate) as in sub base, finished fair & even to receive top layer etc complete all as specified and as directed.
M&L plain cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in lintels up to 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings up to 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating including necessary form work etc complete all as specified and as directed.
M&L joint free, Non skid ceramic, coloured tiles, 7mm to 8mm thick, 1st quality, area of each tile exc 0.11 Sqm but not exc 0.18 Sqm (400x400mm) in flooring, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match with the shade of tiles over and including 20mm thick screed in cement mortar 1:6 complete all as specified and as directed.
M&L for Virified Ceramic tiles double charged /ultra charged 10 mm thick (square/ rectangular) polished, area of each tiles exc 0.42 Sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick Screed bed or bedding layer in cement mortar 1:6 for laying floor finishes complete all as specified and directed
M&L for Coloured, glazed ceramic tiles of size 300 x 600 x 7mm in vertical surfaces (including designed borders ) such as skirting and dados, set and jointed in neat cement slurry & pointed in white cement mixed with pigment to match with the shade of tiles over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and as directed. Note:- (Rate of Designer border in vertical surface shall deemed be included in quoted rates)
M&L 75 mm thick PCC 1:3:6, type C-2, using (40mm graded stone aggregate) as in plinth protection/hard standing and finished the surface even and smooth without using extra cement complete all as specified and as directed.
Taking down cement plaster of any description including racking out joints hacking for key and scrubbing down with water complete all as specified and as directed.
M & L for washed stone grit plaster on exterior walls in two layers, under layers 12 mm thick cement plaster 1:4 (1 cement :4 coarse sand) following the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer with 15 mm thick cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand:2 coloured marble stone chipping 10mm nominal size) including using Colour pigment & marble powder as required in ground in panels with groove all around as per approved pattern including scrubbing and washing the top layer with wire brushes and water to expose the stone chippings includind forming groove of uniform size 15mm wide and 15mm deep as per approved pattern complete all as specified and as directed.
M&L 15mm thick rendering in cement mortar 1:4 mixed with water proofing compound on fair face of brick work or concrete surfaces, finished fair & even complete all as specified and as directed. (Note: WPC shall be measured & paid separately under respective item of this Schedule.)
Supply only integral water proofing compound complete all as specified and as directed.
M&L 15mm thick rendering in cement mortar 1:6 on brick work or concrete surfaces, finished fair & even without using extra cement complete all as specified and as directed.
Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed.
S&F in position Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour, having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.
S&F Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridge/valley gutter, roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.
Dismantling wrought iron or mild steel work of any discretion not otherwise provided for complete all as specified and as directed.
S&F steel work in tubular column, purline, rafter etc using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St-240 including one shop coat of zinc chromate primer (including preparation of surface) at Contractor’s workshop before fabrication complete all as specified and as directed.
S&F mild steel plate (plain or chequered), channels, square cut or notched (ordinary and counter sunk) forming holes with welded attachment to GI pipe in base/ connections etc. including one shop coat of zinc chromate primer (including preparation of surface) at Contractor’s workshop before fabrication Fe 410 -W (Gde-E- 250) quality-A complete all as specified and as directed.
Framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gde E-165 complete all as specified and as directed.
Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets etc complete all as specified and as directed.
S & F plain gypsum board panel 12 mm thick on ceiling with and including necessary GI frame work for seamless ceiling used with ' T ' , channel or any section including screws , cleats ,fasteners, clips and all required accessories , hangers etc of galvanized steel all as per manufacturer design conforming to IS-2095 and 2542(1981) the weight of the board shall be not less than 7 kg per sqm etc ( Any Design & pattern as approved by GE) complete all as specified and directed.
S&F GI powder coated snap grid frame work for false ceiling (Size of grid 605X605 mm) complete all as specified and directed.
S&F Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I.flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed.
S&F 4 mm thick Eco building board fixed or laid/inserted to GI/ Aluminium framework with screws complete all as specified and directed.
Dismantling water tanks including ball valve and all other connection cap exc 500 ltr but n.exc 1000 ltr and removing from site complete all as specified & directed by Engg in Charge.
S&F Rotational moulded polyethylene water storage tanks triple layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part In any position white in colour 1000 ltr capacity complete all as specified.
S & F ball brass valves, high pressure, with polyethene float and flynut complete screwed for iron pipe of 20mm dia all as specified
S&F as in repair oval type wash hand basin chinaware of 560 x410 mm size, fixed on counter type platform complete all as specified and as directed. (Make : Jaquar cat part No. FLS-WHT-5701 or equivalent as per approved make list)
S&F 15mm bore brass CP WHB mixer swan neck type for mixing hot & cold, elbow operated water screwed down for iron pipe and fixed complete. (Make : Jaquar cat part No. KUP-35011-BPM or equivalent as per approved make list)
S & F in repairs Vitreous china floor mounted WC ( Cascade) one piece type (off white) including connecetion in drain etc incl water closet seat cover , flushing cistern, with P or S trap with all fitting and fixture complete all as specified and as directed. (Make : Jaquar cat part No. ONS-WHT- 10853S300 UFSM or equivalent as per approved make list).
S&F in replacement health faucet with 1 m long flexible tube in brass CP finish in cluding wall hook for EWC complete all as specified. (Make : Jaquar cat part No. ALD- 587 or equivalents per approved make list).
S&F in replacement for CP toilet paper holder fixing to wall with ss screw compete all as specified and directed (Make : Prayag, jaquar or Equivalent ).(Make : Jaquar cat part No. ACN- 1153S or equivalent as per approved make list).
S&F insheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long.
S&F in repair Stainless steel sink 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.
S&F Stainless steel curtain rod 20 mm bore with fixing brackets decorative Patteren, with 2 Nos Side Holder (Latoo) rollers etc. as in curtain rod complete all as specified and directed.
Taking down steel tubing including connection 15 mm bore fixed in any position.
All as item No 67 above but 20mm bore
S&F 20 mm bore tubes medium grade galvanised with all fittings and fixed to walls, ceilings or laid in floors complete all as specified and directed
Supplying and laying of 20 mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors concealed type complete all as specified and directed.
S&F 20 mm bore Brass Elbow for fixing of cpvc pipe
S&F Brass Elbow (3/4 X ½) mm for fixing of cpvc pipe
S&F 20 mm Brass Tee for fixing of cpvc pipe
S&F 20 mm Male Brass Threaded Adaptor (MTA/ MBTA) ) for fixing of cpvc pipe
S & F as in repair 15 mm bore chromium plated fancy bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule.
S&F in repairs Kitchen sink mixer of cast copper alloy , fancy type , chromium plated, and mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and as directed.
S & F in repair brass chromium plated shower rose 200x200 mm with swivel joints including fixing to steel pipe or union. (Make : Jaquar cat part No.OHS-CHR -1639 or equivalent as per approved make list.
S&F in repairs wall mixer 3-in-1 system with provision for both hand shower and overhead shower complete with 115 mm long bend pipe, connecting legs wall flange(excluding showers) of cast copper alloy , fancy type , chromium plated, and mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and as directed. (Make : Jaquar cat part No.FUS-29273 UPR or equivalent as per approved make list)
S & F in repair 100/110 mm dia PVC floor trap , with Stainless steel floor water Grating with cockroach trap 100 mm to 125 mm dia with or without hole for waste pipe including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and as directed.
S&F15 mm bore angle stop valves cast copper alloy chromium plated screwed down high pressure with crutch or butterfly handle screwed withr iron pipe of union. (Make : Jaquar cat part No.COP-057 PM or equivalent as per approved make list)
S &F in repairs brass chromium plated towel rack all as specified (Make : Jaquar cat part No.ACN-1181 S or equivalent as per approved make list)
Dismantling of rain water /waste drain pipe of any type & dia, jointed in cement mortar and taking out of trenches, if required
S&F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls, laid in trenches or in floors using suitable for pipe complete.
S&F as PVC (SWR) multi floor trap with grating including jointing with solvent cement to waste pipe fixed in cement concrete type B1 (1:2:4) out let dia 75mm complete.
S&F PVC (SWR) bends 75mm bore any radius with access door including jointing with solvent cement complete all as spd.
S&F PVC (SWR) junction single, (Single T) equal or unequal 75 mm bore including jointing with solvent cement complete all as spd.
S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors 110mm bore complete.
S&F PVC (SWR) junction single, (Single T) equal or unequal 110mm bore with access door including jointing with solvent cement complete all as spd.
S&F PVC (SWR) bends 110 mm bore any radius including jointing with solvent cement complete all as spd.
S&F PVC (SWR) vent cowl 110 mm bore complete all as spd.
S&F 110mm PVC (SWR) WC connector with lip ring including jointing with solvent cement complete.
Demolition and breaking up drain pipes (Salt glazed stoneware) set in cement mortar 150 mm internal dia of pipe complete all as specified and directed.
S&F Reinforced concrete pipes 150mm bore, class NP2, laid and jointed complete with collars complete all as specified and directed.
M&L cement mortar concrete bed to drain pipes in PCC 1:3:6 type C-2 (using 40 mm graded crushed stone agg) incl packing under and haunching against the sides of pipes after they are laid and tested in bores of pipe 150 mm dia complete all as specified and directed.
Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron. etc. complete.
M&L for treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors complete.
M&L preparation of new plastered wall surfaces and applying two coats of Oil Bound Distemper over and including a coat of alkali resistant primer complete all as specified and as directed.
M&L for washing, rubbing down & stopping of distempered & painted surface of old plastered wall surfaces and applying two coats of Oil Bound Distemper complete all as specified and as directed.
M & L for preparation of new plaster surfaces applying texture finish of approved shade/Colour/pattern /texture, over and including a coat of oil based primer over 3 mm wall care putty complete all as specified and directed.
M & L for complete removal of existing treatment from old decorated wall surface scrapping by electrically operated grinder machine from old decorated wall surface by scrapping and applying a coat of cement based wall care putty on complete surface and applying texture finish of approved shade/Colour/pattern /texture, over and including a coat of oil based primer complete all as specified and as directed. Note: Quoted rates shall deemed to be includs painting at any height including scaffolding work, as required.
M&L preparation of new steel surface over 10cm width/girth and applying two coats of synthetic enamel paint over and including one coat of red oxide primer complete all as specified and as directed.
M&L preparation of old steel surface over 10cm width/girth and applying one coats of synthetic enamel paint complete all as specified and as directed.
M&L for two coats of synthetic enamel paint over a coat of pink primer on new wood surfaces width or girth exc 10cm including preperation of surfaces complete all as specified and directed.
S&F factory made precast reinforced cement concrete manhole cover (RCC 1:2:4, using 20 mm graded stone aggregate) 100 mm thick (Square/rectangulr/circular) with and including 10 mm thick round ms bars and placed over manholes at site complete all as specified and directed.
S&F factory made precast cement concrete frame (PCC 1:2:4 using 20 mm graded stone aggregate) of size 90 cm x 90 cm x 50 mm thick and height 150 mm, for placing manhole cover and fixed at site over manholes with cement slurry complete all as specified and directed.
Supply and laying sand for cushioning to interlocking paver block/ under ground cable complete all as specified and directed. Note :- Punned thickness will be measured for payment.
M&L for designer, glass moulded precast concrete interlocking paver block shape, size and colour as approved confirming to IS 15658-2006 of 80 mm thickness M-40 Grade made with grey cement and pigment including sealing the ends using PCC 1:2:4 type B-0 (12.5mm graded stone aggregate) complete all as specified and directed.
S & F Sheet glass corner shelf assembly consisting of 5.5mm thick sheet glass Min size 300 mm x 300 mm with chromium plated bracket guard and railing complete all as specified and as directed.
Taking down carefully copper/ aluminium point wiring (light, fan, socket or power) complete (fitting such as switches, ceiling roses, pendent, regulator socket etc to be measured separately) and making good disturbed surfaces of wall floor etc complete all as specified and directed.
Taking down old and unserviceable sub main wiring and removing from the site and making good the disturbed surface complete all as specified and directed.
Taking down ceiling fan, exhaust fan & geyser including connection cable, dismantling blades and removing fan and blades to MES stores all as specified and directed by Engg -in-charge
M&L point wiring for modular switches with 1.5 sqmm , single core , multi stranded copper conductor PVC insulated and unsheathed (FRLS) cable 1100 Volts grade, drawn through concealed Conduit 25 mm as requirement of site including cadmium plated screws as per ISI, size pvc insulated unsheathed copper earth continuity conductor to common earth and connecting to earth dolly for One light/Bell point/fan point/socket outlet on independent board controlled by one switch 5 Amps one way single pole complete all as specified and directed.
All as per item No. 112 above but one three pin 5 Amps socket out let on same board.
All as per item No. 112 above but point wiring of copper cable multi stranded 2.5 Sqmm size for 15 Amps socket outlet on independent board with 2.5 Sqmm size of earth conductor complete all as specified and directed.
All as per item No. 112 above but point wiring of copper cable multi stranded 4.00 Sqmm size for AC point wiring with 4.0 Sqmm size of earth conductor complete all as specified and directed.
S & F Ceiling rose, PVC/ polycarbonate, isolated body type three terminal, 240 volt complete all as specified and directed.
S&F of Modular switch piano , flush button type , single pole , one way 5 Amps complete all as specified and directed.
S&F of Modular switch piano , flush button type , single pole , one way 15 amps complete all as specified and directed.
S&F of Modular socket outlet 3 pin and 2 pin , 5 amps , flush type complete all as specified and directed.
S&F of Modular socket outlet 2-in-1, 3 pin, 5 and 15 amps , flush type complete all as specified and directed.
S&Fof Fan step regulator, 120W - 2 module suitable for ceiling fan complete all as specified and directed.
Supply and fix of for Modular Bell push 6A 1 module.
S&F of Bell ding dong, AC, 230 Volts, fixed in position & connecting complete all as specified and as directed.
Supply and fix Lamp holder, white Polycarbonate body, with back plate suitable for batten fittings fixed in position & connecting complete.
M&Lof for sub main wiring with 2 runs of 4 sqmm single core, PVC insulated & unsheathed cable 1100 Volts grade with multi stranded, copper conductor drawn through concealed conduit including PVC rigid conduit 25mm medium grade fixed to the surface of walls/ ceiling as per ISS and one run of 4 sqmm eath wire size PVC insulated copper conductor complete all as specified and directed.(Note. Two run of cable and one run earth conductor shall be measured as one length).
M&L of for sub main wiring with 2 runs of 10 sqmm single core, PVC insulated & unsheathed cable 1100 Volts grade with multi stranded, copper conductor drawn through concealed conduit including PVC rigid conduit 32mm medium grade as per ISS and one run of 10 sqmm size earth wire PVC insulated copper conductor complete all as specified and directed.(Note Two runs of 10 sqmm copper FRLS cable & one run of 10 sqmm copper cable in and including 32 mm PVC conduit medium grade will be measured as one unit.
S & F in repair for distribution board double door type, SPN, 12 way, complete including 200 Amps rated bus bar, neutral link, blanking plates etc complete all as specified and directed.
S & F in repair for load line distribution board double door type, TPN, vertical, 4 way, complete suitable for accomodating upto 125 Amps MCCB with incomming frame three pole , including bus bar, neutral link, blanking plates etc complete all as specified and directed.
S & F of MCCB 415 V, 125 Amps, 36 KA, 4 Pole complete all as specified and directed.
S & F of MCB DP, 240 Volts, 40 Amps complete all as specified and directed.
S & F of MCB DP, 240 Volts, 63 Amps complete all as specified and directed.
S & F of MCB SP, 240 Volts, 10 Amps complete all as specified and directed.
S & F of MCB SP, 240 Volts, 16 Amps complete all as specified and directed.
S & F of MCB SP, 240 Volts, 32Amps complete all as specified and directed.
S & F of MCB SP, 240 Volts, 63 Amps complete all as specified and directed.
S&F in replacement Bldg security light fitting LED 25 Watt, highly efficient IP66 LED, high power having aluminium pressure die cast housing and PC cover in the front and high power lens for batwing light distribution with electric connection with suitable size of PVC insulated copper wire including GI bracket 1.5 Mtr with clamps and bolts complete all as specified and directed.
M&L for earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level, connected to galvanised earth lead wire 4.0 mm dia by means of nuts, bolts, checknuts and washers of galvanized iron or steel as shown in electrical plate No 3 connected to earthing test point including testing on completion all as directed. Note:- The unit rate quoted shall be include for necessary excavation and earth work , earth strip connected to test point max 7 mtr as per site requirement, PCC 1:3:6 type for earth pit & Pit cover, funnel with wire mesh including GI medium grade watering pipe 15mm bore & 25 mm dia for supporting of earth strip/wire.
S&F of of modular white cover plate with frame , 1/2 module.
S&F of modular white cover plate with frame , 3 module.
S&F of modular white cover plate with frame , 4 module.
S&F of modular white cover plate with frame , 6 module.
S&F of modular white cover plate with frame , 12 modulecomplete all as specified and directed.
S&F of after taking down rusted sunken box by modular metal flush board 1/2 module.
S&F of after taking down rusted sunken box by modular metal flush board 3 module.
S&F of after taking down rusted sunken box by modular metal flush board 4 module complete all as specified and directed.
S&F of after taking down rusted sunken box by modular metal flush board 6 module complete all as specified and directed.
S&F ofafter taking down rusted sunken box by modular metal flush board 12 module complete all as specified and directed.
Supply, fixing and connecting in replacement recessed mounting Ultra slim Round LED Down light 15 watt designed white colour,for POP Light with excellent thermally managed aluminum pressure die cast housing with heat - dissipating fins for large surface area finished in epoxy powder coated , deliver high efficacy light complete with all accessories all as specified and as directed.
Supply, fixing and connecting in replacement of Slim LED Batten 10 watt with Surface/Wall Mounted integrated LED 2 feet Fitting Polycarbonate housing and diffuser with viewing angle of 120 degree used to enhance the luman output Height suitable for White Housing & Isolated Electronic Driver, with Output Short-circuit protection, Surge Voltage protection up to 2.5 KV . Total system Lumen of 10W Led should be 1000 or above in Cool day Light(6500K), Power factor>0.9, CRI (Ra) >80, System with Average life of 50000 Burning hours complete with all accessories as required complete all as specified and as directed.
Supply, fixing and connecting in replacement of Slim LED Batten 20 watt with Surface/Wall Mounted integrated LED 4 feet Fitting Polycarbonate housing and diffuser with viewing angle of 120 degree used to enhance the luman output Height suitable for White Housing & Isolated Electronic Driver, with Output Short-circuit protection, Surge Voltage protection up to 2.5 KV . Total system Lumen of 20W Led should be 2000 or above in Cool day Light(6500K), Power factor>0.9, CRI (Ra) >80, System with Average life of 50000 Burning hours complete with all accessories as required complete all as specified and as directed.
S & F sheet metal enclosure with socket plug top single pole, neutral enclosure with a two pin earth plug, socket complete with one MCB of Cap 25 Amps, 240 V complete all as specified and directed.
Supply and Fixing Geysers of cap. 25 Ltr, five star rated Electric Driven, Single phase, 240 V, Storage vertical type and heating element 2 KW, inner shell Glass lined enamel coated incoloy heating elements , temperature indicating dial , tank design is suitable to withstand 8 bar pressure, shock resistant ABS outer body automatic cutoff , including electrical and water connection with hot and cold water connection pipe (PVC type) and fixed on the wall with mild steel fastner 150 mm long and 10 mm dia with pin and bolts complete with minimum two year warranty on Product all as specified and directed. Note :- Old unserveciable Geyser will be deposited to MES store yard.
S& F exhaust fan 250 mm sweep 240 Volt plastic type, connection with flexible PVC copper wire from ceiling rose to exhaust fan including provn of opening of hole on brick wall and grouting nut and bolt of suitable size complete all as specified and directed. Make:-Havells/halonix/Bajaj Note :- Old unserveciable exhaust fan will be deposited to MES store yard.
S& F Exhaust fan 300 mm sweep 240 Volt Heavy duty (Iron), 1375 RPM , with suppoting frame connection with flexible PVC copper wire from ceiling rose to exhaust fan including provn of opening of hole on brick wall and grouting nut and bolt of suitable size complete with minimum two year warranty on Product all as specified and directed. Note :- Old unserveciable exhaust fan will be deposited to MES store yard.
M&L for Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc. & cutting chases for concealed water tubing or concealed conduit wiring, etc & making good, cutting not exc 10 cm girth
Supplying, installation, testing & Commissioning of LED Post top 30 watt , I P65 elegantly designed spun aluminium and high grade aluminium , heat sink for efficient thermal managment , pole mounted post top 30W with MS base provided to support the housing Power coated black treatment .
Supply, fixing and connecting in replacement recessed mounting back- lit LED 2X2, 36 watt tile in CRCA housing with full opal diffuser suitable for Armstrong/ Grid Ceilings Type, size 595X595mm (Nominal),High lumen efficacy LED with viewing angle of 120 degree used to enhance the luman output Height suitable for White Housing & Isolated Electronic Driver, with Output Short-circuit protection, Surge Voltage protection minimum 2.5KV, safety & performance test as per IS:15885 Total system Lumen not less than 3600, in Cool day Light (6500K), Power factor>0.95, CRI (Ra) >80 with Average life of 50000 Burning hours complete with all accessories as required complete all as specified and as directed.
S&F of modular blanking plate, 1 Module complete all as specified and as directed.
S&F of PVC T-COVER complete all as specified and as directed.
VED PRAKASH ARORA
Gaurav Construction Company
M/s Verma and Co
L G BUILDERS
The new hut furnitures
Ashish Sehgal and Co.
CHOPRA BUILDERS
BEHAL TRADERS
M/S SURINDERAS CONSTRUCTION CO.
M/s M M BAHL
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .