Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹22.8 LAccepted-AOC HOUSE NO 113 SAINIK SOCIETY DUMNA ROAD HITKARNI DENTAL COLLAGE JABALPUR MP 482001 | JABALPUR | MADHYA PRADESH | 482001 | L1 | Accepted-AOC BEING LOWEST AFTER CONSIDERING SCH OF CREDIT AND DISCOUNT AS APPLICABLE | |
| 2 | L2₹26.7 L+₹2.6 L (10.6%)Rejected-Finance | L2 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 3 | L3₹26.9 L+₹2.8 L (11.5%)Rejected-Finance MANEGAON DIWAN BADA KHAMARIA JABALPUR M P PIN 482005 | JABALPUR | MADHYA PRADESH | 482005 | L3 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 4 | L4₹28.4 L+₹4.3 L (18.0%)Rejected-Finance | L4 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 5 | L5₹28.6 L+₹4.5 L (18.8%)Rejected-Finance | L5 | Rejected-Finance OTHER THAN LOWEST BIDDER |
Tender Value
₹32.5 L
EMD Value
₹65,000
Closing Date
13 Dec 2021, 6:00 pmClosed
CWE JABALPUR
HQ CWE JABALPUR PB NO 54 SUPPLY MARG SADAR JABALPUR 482001
SPECIAL REPAIR TO DRAINAGE AND SEWAGE LINE OF OTM ( SIGNALS RECORDS AND NEW ACCN ) AND MD ACCN ( BIRBAL AND SOMNATH ENCLAVE ) OF SIGNAL RECORDS UNDER GE (EAST) JABALPUR
2021_MES_489402_1
82581/EAST/JBP/E8
Open Tender
Civil Works
Item Rate
180 days
JABALPUR
AS PER NIT
8 documents required · 8 mandatory
₹500
Yes
GE EAST JABALPUR
₹65,000
Yes
23 Feb 2022
20 Nov 2021
15 Dec 2021
20 Nov 2021
13 Dec 2021
6 Dec 2021
20 Nov 2021 - 4 Dec 2021
Amount
Excavation in trenches, not exceeding 1.5m wide and not exceeding 1.5M in depth for foundation, for laying of pipe, cable etc or not exceeding 10 Sqm on plan and not exceeding 1.5M in depth for shafts, cesspits, manholes, pier holes, etc and getting out in any type of soil complete all as specified and directed.
Excavation in trenches, not exceeding 1.5m wide and exceeding 1.5M but not exceeding 3M in depth for foundation, etc or not exceeding 10 Sqm on plan and exceeding 1.5M but not exceeding 3.0M in depth for shafts, cesspits, manholes, pier holes, etc and getting out in any type soil complete all as specified & directed.
Returning, filling in excavated approved soil, including spreading, levelling, watering and well ramming in layers not exceeding 25cm each complete all as specified and directed.
Removing excavated soil to a distance not exceeding 50M and depositing where directed at a level not exceeding 1.5M above the starting point complete all as specified and directed.
Demolition of cement concrete of any description (unreinforced) in ground floors and paving not exceeding 15cm thickness (below or above ground level) including removal of debris to out side MD land complete all as specified & directed.
Demolition of cement concrete of any description (reinforced) in ground floors and paving not exceeding 15cm thickness (below or above ground level) including removal of debris to out side MD land complete all as specified & directed.
PCC 1:3:6 type C-1 using 20mm graded crushed stone aggregate as in surface channels and drains complete all as specified and directed.
PCC 1:3:6 type C-1 using 20 mm graded crushed stone aggregate as in lintel band, plinth courses, copings, benching, bed plates, PCC blocks etc and the like including weathering slightly rounded/ chamfered angles with & including necessary use and waste of form work for fair faces of concrete, complete all as specified and directed.
PCC 1:2:4 type B-1 using 20 mm graded crushed stone aggregate as in lintel band, plinth courses, copings, benching, bed plates, PCC blocks etc and the like including weathering slightly rounded/ chamfered angles with & including necessary use and waste of form work for fair faces of concrete, complete all as specified and directed.
M&L precast reinforced cement concrete 1:2:4 type B-1 using 20mm graded crushed stone aggregate in cover slabs (for manholes etc), landing, shelves and similar articles with plain faces including necessary moulds and setting in cement mortar 1:4 complete all as specified and directed. Note:- (i) All RCC manhole covers to be embossed with month & year of casting. (ii) Reinforcement will be measured & paid for separately
M&L for PCC (1:3:6) type C-2 using 40mm graded crushed stone aggregate as in foundation, filling, mass concrete etc complete all as specified & directed.
M&L for PCC (1:4:8) type D-2 using 40mm graded crushed stone aggregate as in foundation, filling, mass concrete etc complete all as specified & directed.
Taking down cement plaster etc on brick walls/ concrete (ceiling) surfaces of any descriptions including racking out joints, hacking for keys, scrubbing down with water and disposal of rubbish to out side of MD land complete all as specified & directed.
M&L for 15mm thick rendering in CM 1:4 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified & directed.
Dismantling of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and pre-cast concrete articles complete all as specified and directed.
M&L for brick work with sub class 'B' modular fly ash bricks, straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified & directed.
M&L for mild steel TMT bars 10mm dia and over as in reinforcement for concrete, cut to length, bent to shape required, including cranking, bending, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
Dismantling/ demolition and taking up/ breaking up drain pipes (SGSW, AC or RCC) of internal dia 150mm, set in cement mortar complete all as specified and directed.
Dismantling/ demolition and taking up/ breaking up drain pipes (SGSW, AC or RCC) of internal dia 200mm, set in cement mortar complete all as specified and directed.
Supply & fix in repair reinforced cement concrete pipes, class NP2, 300mm nominal bore with collars, laid in trenches and jointed in CM 1:1 complete all as specified and directed.
M&L for preparing newly plastered surfaces of wall and applying three coats of white wash complete all as specified and directed.
Supplying and laying of UPVC pipe 150 mm dia. , minimum 4 mm thick including jointing with coupler complete laid in trenches or floors complete all as specified and directed. Make :- Supreme / Finolex / Kisan.
Supplying and laying of UPVC pipe 200 mm dia. ,minimum 4 mm thick including jointing with coupler complete laid in trenches or floors complete all as specified and directed. Make :- Supreme / Finolex / Kisan.
M&L for soakage wells of size 1.2 m dia. and 3.0 m deep including excavation in any type of soil and using PCC 1:3:6 in foundation and honeycombed wells and solid using RCC M25 concrete for cover slab and filling with brick bats, brickwork in CM 1:4 for intercepting chamber and screen chamber complete all as specified and directed. Note :- Refer TD drawing CEJZ /TD/58 Sheet No. 1/1 dated 05-05-2000 for soak well .
Supplying & fixing in repairs 110 mm bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints laid in trenches, in floor or walls with & including necessary clamps of requird size etc complete all as specifed & directed. Make:- Supreme or Kisan Mouldings pvt Ltd or Finolex as approved by GE.
Supplying & fixing in repairs 75mm bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints laid in trenches, in floor or walls with & including necessary clamps of requird size etc complete all as specifed & directed. Make:- Supreme or Kisan Mouldings pvt Ltd or Finolex as approved by GE.
Supplying & fixing in repairs 110mm bore PVC (SWR) bends of any radius complete all as specified & directed. Make:- Supreme or Kisan Mouldings pvt Ltd or Finolex as approved by GE.
Supplying & fixing in repairs 75mm bore PVC (SWR) bends of any radius complete all as specified & directed. Make:- Supreme or Kisan Mouldings pvt Ltd or Finolex as approved by GE.
Supplying & fixing in repairs PVC(SWR) vent cowl of 110mm bore of pipe complete all as specified & directed. Make:- Supreme or Kisan Mouldings pvt Ltd or Finolex as approved by GE.
Supplying & fixing in repairs, PVC (SWR) branch pieces , single Y (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches, 100mm bore of make as approved by GE with cement joints, fitted with oval access doors complete all as specified and directed.
Supplying & fixing in repairs, PVC (SWR) branch pieces , single Y (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches, 75 mm bore of make as approved by GE with cement joints, fitted with oval access doors complete all as specified and directed.
Supplying & fixing in repairs, PVC (SWR) gully trap with grating including jointing with solvent cement complete, dia of outlet 125/110 mm complete all as specifed & directed.
M&L for cutting into existing manholes for connecting new drains, 150mm bore, making good to pipe and rendering, cutting out existing benching for and forming branch channel (½ round or ¾ section) in cement concrete 1:2:4 type B1 using 20mm graded stone aggregate, smooth finished, and reforming benching as required complete all as specified and directed.
Schedule of credit amount of Rs. 1,25,930.00 to be deducted during AOC
M/S BHARTI ENTERPRISES
M/S BHATIA CONSTRUCTIONS
M/s Ram Associates
G S CONTRUCTIONS
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .