PROVISION OF SLIDING GATE ON TAXI LINK AT CGAE (PBR) NAYAGAON, PORTBLAIR

Amount

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed.

Excavation in post holes (or similar holes) each n. exc 0.5 cu.m, getting out in soft/loose soil complete all as specified and directed.

Returning filling in , excavated soil including spreading, leveling and well ramming in layers not exc 25cms each any type of soil complete all as specified and directed.

Removing excavated surplus material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.

M&L for hard core, broken to gauge n exc 63 mm using broken stone/boulder complete all as specified and directed.

M&L for providing cement concrete 1:3:6 type C2 (40 mm graded aggregate) in foundations, filling and mass concrete including pole foundation complete all as specified and directed.

M&L for providing reinforced cement concrete M-30 (design mix) in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed. Note:- (i) The foundation shall be designed by structural consultant and vetted by IIT/NIT/Govt. Engg College to withstand the gate travelling over it. The gate will be travelling over existing PQC of taxi track and over foundation laid on berms of taxi track all as directed by Engineer in Charge. The rate quoted is deemed to inclusive of the same and nothing extra will be admissible on this account. (ii) Reinforcement shall be measured and paid seperately under relevent item of this Schedule.

S&F mild steel TMT bars 8 to 10 mm dia and over, cut to length, bent to shape required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (anealed) not less than 0.9 mm dia or securing with clips as in main reinforcement and stirrups complete all as specified and directed.

M&L for cutting channels, grooves or rebates exc 15cm but n. exc 30 cm girth into concrete surface and trimming the surface complete all as specified and directed. Note:- The existing PQC of taxi track shall be cut to required shape for sliding gate and making good all as directed by Engineer in Charge.

S&F framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work including provision of Y angle at top of gate for fixing concertina coil and locking arrangement to the gate leafs and removable vertical peg for support to withstand the wind pressure, for stability at all times; conforming to Fe.290 Gde-E-165 complete all as specified and directed. Note:- i) The Schematic drawing of Sliding Gate shall be submitted to this office for approval, prior to the vetting of design by IIT/NIT/Govt. Engg College. ii) The Sliding Gate shall be designed by a structural consultant and vetted from IIT/NIT/Govt. Engg College. Rate quoted is deemed to be inclusive of the same and nothing extra is admissible on this account. iii) The design and fabrication shall account for provision of motorised sliding of gate with provision for fixing driving rack. However provision for motor, concertina coil and driving rack are not included in the scope of contract.

Supply only PVC coated MS galvanised chain link fencing of 4 mm dia wire complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and directed.

M&L for preparation of new or previously untreated steel surfaces, not otherwise described over 10cm width or girth and applying two coats of anti corrosive paint over a coat of anti corrosive primer or three coats of anti corrosive paint all as per manufacture's instructions complete all as specified and directed. Make: Asian paint apcolite - Rust Shield/ Berger Rust Pro/ MRF Vapocure EPIDEC or equivalent as approved by GE.

Supply & lay XLPE insulated, armoured heavy duty 1100 volt grade electric LT UG cable with multistranded aluminium conductor of size 10 Sqmm 4 Core in trenches/along the wall/including making all connections complete with lugs, suitable cable glands as required at site complete all as specified and directed.

M&L for sand cushioning by spreading in trenches fine dry river sand by gently by punning down manually as in cable protection all as specified and as directed by EIC. Note : Sand after punning down will be measured and paid.

Supply and laying precast concrete cable cover class LV type-I, flat size 250mm x 150mm x 40mm laid in trenches complete all as specified and directed.

Supply and fix in replacement LED street light fitting 70 Watt 230 V AC outdoor type with high pressure die cast aluminum housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics, IP 65/66 protection including provision of GI bracket made out of 40 mm dia medium grade GI tube, bending to required shape, clamps, nuts & bolts complete all as specified and directed. Make: Cat No - LST-70-CDL M of Crompton or equivalent in Philips/Bajaj.

M&L for taking down of LT panels out door type complete including all MCBs/MCCBs/Timer/Indicator Lamps including disconnecting of cables (3.5 Core 120 sqmm - 2 Nos & 4 Core 10 Sqmm - 2 Nos) and shifting the panel to new location of 50 meter away from original location as directed by Engineer in Charge including provision of foundation in PCC 1:3:6 as per site requirement.

Supply & lay GI pipe light grade 100 mm dia for Cable protection complete all as specified and directed.

Supply & lay GI pipe light grade 40 mm dia for Cable protection complete all as specified and directed.

Dismantling Concrete Poles of any size and refixing Prestressed concrete pole of 7.5 metre long complete all as directed. Note : Excavation and foundation will be measured and paid seperately under relevent item of this Schedule.

M&L for PCC 1:2:4 type B-1 (20 mm graded agrregates) as in pedestal of pole/ strut and in coping including necessary form work and finishing exposed faces of concrete even and smooth using extra cement complete all as specified and directed.

Supply and fix in replacement of FRP looping box of size 140 X 140 X 95 mm or nearest size with heavy duty four pole bakelite connector of 63 amps rating with terminals and connectors, MCB 6 Amps, Din Rail, GI clamps made out of GI flat of size 25mm X 3 mm channel and including providing cable glands and lugs for existing cables and making connections complete all as specified and directed. Make - National / Sintex .

Supply & lay 3 Core 1.5 Sq mm size multistranded copper conductor PVC insulated unsheathed 650 / 1100 Volt Grade with and including 20 mm dia PVC conduit and passing through PVC conduit with necessary saddle, clamps, bolts & nuts, copper lugs all for interconnection of cable looping box to Street Light Fitting, Post Top Lantern etc complete all as specified and directed.

M&L for cutting existing road/hard standing not exc 45x45 cm in wide & depth getting out excavated material for laying cable, returning filling & well ramming, watering and finishing surface 15 cm from top using PCC 1:3:6; including removal of surplus soil complete all as directed

Sree Tirumala Enterprises

SHUBHAM SHANKAR GAIKWAD

N Rathinam

M/S VISHAL CONSTRUCTION

AMR TRADERS

M/s V M K Construction

RAVI REALCONS PRIVATE LIMITED