Loading
Loading…
Loading…
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
22 Sept 2026, 6:00 pm
GE (East) Delhi Cantt-10
GE (East) Delhi Cantt-10
REPAIR/ REPLACEMENT OF UNSV SPARES OF COOLING TOWERS, AHUs, PUMPS, REPLACEMENT OF SEMI HYBRID HEPA FILTERS AND OTHER CONNECTED ITEMS AT BHDC UNDER GE (EAST) DELHI CANTT-10
2026_MES_787178_1
GE/DE-128/2026-27
Open Tender
Civil Works
Item Rate
180 days
GE (East) Delhi Cantt-10
As per NIT Documents
9 documents required · 9 mandatory
₹500
GE (East) Delhi Cantt-10
₹80,000
Yes
1 Sept 2026
1 Sept 2026
24 Sept 2026
1 Sept 2026
22 Sept 2026
15 Sept 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Taking out the filter from AHU of size 1000 CFM to 16000 CFM or any capacity and cleanning of coil with suitable chemical and jet of water pressure with pump and remove all the scale and foreign material deposited in side the coil followed with air pressure to sweep up all the particles and ensure thorough flow of air over the cooling coil, refixing of AHU filter after cleaning complete all as specified and directed. | 40 | Each Job | 1.25 | ₹50 |
| 2 | M&L for repairing/ servicing AHU Fan Motor of 5 HP/5.5 HP capacity, opening the motor, cleaning the shaft, bush and greasing and replacement of minor parts like seal, gasket, tighten the screws, greasing the moveable parts complete all as specified and directed. | 5 | Each Job | - | - |
| 3 | Description all as per item No. 2 above here in before but 7.5 HP Capacity | 2 | Each Job | 100 | ₹200 |
| 4 | Description all as per item No. 2 above here in before but 10 HP Capacity | 2 | Each Job | 101 | ₹202 |
| 5 | Rewinding the motor with new super enameled copper winding of size & discription to match with existing including insulating materials, varnishing, drying, replacement of both driven end & non driven end bearings and base plate, reassembling, refixing in same position & connecting including testing and commissioning complete all as specified & directed of size upto 5.5 HP. | 5 | Each Job | 10 | ₹50 |
| 6 | Description all as per item No. 5 above here in before but 7.5 HP Capacity | 2 | Each Job | 11 | ₹22 |
| 7 | Description all as per item No. 5 above here in before but 10 HP Capacity | 2 | Each Job | 10 | ₹20 |
| 8 | Supply and laying in replacement including taking out MS pipe for condenser water or cooling tower line of MS 'C' class 40 mm dia confirming to IS-1239 and IS- 3589 both revised till date as required and as specified and complete with bends, reducers tees, supports vibration, pipe supports, structures shall be painted with 2 coats of synthetic enamel paint over a coat of red oxide primer and complete all as specified & directed. | 30 | RM | 22 | ₹660 |
| 9 | Description all as per item No. 8 above here in before but 50 mm bore. | 24 | RM | - | - |
| 10 | Description all as per item No. 8 above here in before but 65 mm bore. | 30 | RM | 1 | ₹30 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.48 MB
Tender128.pdf
Tender Documents • 1.11 MB
BOQ_882193.xls
BOQ • 0.42 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .