Construction of Pump House building with boundary wall and single cabin Toilet at Gora Bazar, Ward No.5

Amount

Construction of Pump House building with boundary wall at Gora Bazar, Ward No.5

Surface dressing n exc 15 cm deep and getting out, disposed off as directed by E/I

M&L Boring holes 3m deep in soil for under reamed piles and getting out and disposal of spoil to a distance of not exceeding 50m

M&L reinforced cement concrete in piles and beams nominal mix type B0 1:2:4 12.5 mm graded concrete

M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:4 in plinth

M&L Sand filling under floors or in foundations including watering and consolidation

M&L Bricks, sub class B, laid flat, in floors, old size bricks

M&L Cement concrete type B- 2, 1:2:4 (40mm graded aggregate) 100mm thick

M&L Rendering plaster 10mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4

M&L Reinforced cement concrete in coloumn nominal mix type B0 1:2:4 12.5 mm graded concrete

M&L Reinforced cement concrete in Slabs supported on walls beams and columns grade concrete nominal mix type B0 1:2:4 12.5 mm graded concrete

M&L Reinforced cement concrete ( Chajja) supported on walls beams and columns nominal mix type B0 1:2:4 12.5 mm graded concrete

M&L Reinforced cement concrete in lintel supported on walls nominal mix type B0 1:2:4 12.5 mm graded concrete

S & F structural steel work in single section fixed without connecting plate including cutting ,hoisting,fixing in position and applying a priming coat pf app. Steel primer all complete(Fe 410 -W Gde-) (R.S Joist size 200mmX150mm section)weight of R.S Joist @ 27.90Kg/M

M&L Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical Plinth beam

M&L Damp proof course to horizontal surfaces in cment mortar 1:2:4 ( 40mm thick)

M&L Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats on new work

M&L Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

M&L Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed ( 105x60mm)

M&L Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides 35mm thick

S &F Steel windows or ventilators, fixed type, with glazing bars.

One light point or one fan point controlled by one switches with cables 1.5 sq. mm size

pre painted Mild steel, plain, black sheet in steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required ( 1.25mm thickness)

M&L framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165

M&L Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

M&L Supply and Fixing fancy type chromium plated bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed.

M&L Reinfored cement concrete in cornice nominal mix type B0 1:2:4 12.5 mm graded concrete

M&L Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified.(16mm dia)