REPAIR, REPLACEMENT, MAINT PERIMETER LIGHTS, HIGH MAST LIGHTS, SECURITY LIGHTS AND CONNECTED EandM ITEMS AT AF STN SURATGARH

Amount

BOQ (Repair/replacement /maint perimeter lights, high mast lights, security lights and connected E&M items at AF Stn Suratgarh.)

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for laying of pipe/cable and getting out in soft loose soil.

All as per item No. 1 above but depth exceeding 1.5 m and not exceeding 3 m complete all as specified

Returning, filling in including spreading, levelling,watering and well ramming excavated soil in layers not exceeding 25 cm thick each , filling back in trenches after cables have been laid and tested, poles,stays,struts have been erected and tested complete all as specified.

Removal of excavated surplus soil to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified. .

M&L for road cutting upto 600 mm deep and 450mm wide for crossing GI pipe line through road including making good the surface by filling concrete complete all as specified and directed by Engr-in-Charge. Note: concrete will be measured and paid as seperately.

PCC (1:3:6) type C-2 using 40mm graded aggregate as in foundation of (Pole, Transformer, Panel board, stay, post top lantern, repairs to road cutting, drain, path etc) Complete all as specified and directed.

PCC (1:2:4) type B-1 using 20mm graded aggregate as in coping including necessary form work complete all as specified and directed

Material and labour for river washed and screened, dry sand for filling in trenches 8 cm below cable and 15 cm above cable and punned down gently to achieve 10 cm thickness of top layer for cushioning of cables etc, complete all as specified. Note: for payment purpose thickness after punning 18 cm will be measured and paid

S&F sub class B bricks having minimum compressive strength 75 Kg/ Sqcm laid in trenches for cable protection etc complete all as directed by Engineer-in-Charge.

Taking out from trenches/floors/road/wall/pipe/pole LT cable of any size/description and removing & reuse from site incl making good the disturbed surfaces to match with existing surface all as directed.

Supply & laying of LT UG cable XLPE insulated armoured heavy duty elect cable with stranded aluminium conductor 1100 volts grade cross section area 06 Sqmm 02 core as per IS 7098 (Part-I) laid in trenches/ fixing on panels/walls/poles or passing through pipe including connecting with suitable lugs, glands, nuts and bolts and testing complete all as specified and directed.

All as per item No. 11 here-in-before but 10 sqmm 2 core complete all as specified

All as per item No. 11 here-in-before but 16 sqmm 2 core complete all as specified

All as per item No. 11 here-in-before but 10 sqmm 4 core complete all as specified

All as per item No. 11 here-in-before but 16 sqmm 4 core complete all as specified

All as per item No. 11 here-in-before but 25 sqmm 3.5 core complete all as specified

All as per item No. 11 here-in-before but 35 sqmm 3.5 core complete all as specified

All as per item No. 11 here-in-before but 50 sqmm 3.5 core complete all as specified

Labour only for relaying or fixing or passing through pipe, laid in trenches or fixed to pole/wall or fixed to LT panel board at existing places or carrying to other location, 1100 volts grade heavy duty cable with XLPE/PVC insulated stranded aluminium conductor served with inner sheathing of PVC tape, armoured with galvanised steel wire or tape and overall PVC sheathed of size upto 25 sqmm 4 core obtained from item no10 here-in-before with required aluminium cable lugs, heat shrink joints at cable ends all as specified and directed.

Labour only for relaying or fixing or passing through pipe, laid in trenches or fixed to pole/wall or fixed to LT panel board at existing places or carrying to other location, 1100 volts grade heavy duty cable with XLPE/PVC insulated stranded aluminium conductor served with inner sheathing of PVC tape, armoured with galvanised steel wire or tape and overall PVC sheathed of size 35 sqmm to 95 sqmm 3.5 core obtained from item no10 here-in-before with required aluminium cable lugs, heat shrink joints at cable ends all as specified and directed.

Dismentling taking out broken/worn out steel pole of 8.5 to 9.0 mtr long.

Supply and erecting in true vertical position steel tubular swaged pole, 9 metre long, type 410 SP-31 confirming to IS : 2713 including drilling of holes of required size and nuts for fixing of cross arms complete with mild steel base plate 6mm thick of size 300mm x 300mm, finial taper plug bolts, nuts, washers and screws,, painting with two coats of aluminium paint over a coat of red oxide and two coats of black bituminous paint for portion embedded in concrete, painting five black and white bands at lower portion of pole each of 300 mm height at 300mm spacing complete all as specified and directed. (Note : Excavation, earth work and PCC in foundation of poles, coping etc shall be measured and paid separately under respective items of Sch 'A').

Labour only for re-fixing of steel tubular swaged pole complete with cast iron base plate , painted internally with a coat of bituminous paint and externally one primer coat, one under coat and one finishing coat of aluminium paint as specified type (9 mtr long).

Labour only for disconnecting street light cable of any size from pole junction box pole, refixing the junction box in proper way by replacing nut bold & clamp, re-connecting the same cable after removing carbon /burnt insulation part of cable by cutting and refixing cable with new cable lugs all as specified by Engr-in-charge.

Demolition of concrete copping of steel tubular pole any type all as specified and directed by Engr-in-Charge.

Taking down old unserviceable Tower light/ Hibay light /flood light fittings or any type, any capacity from hanger of height approx 20 mtr and replace it with new LED tower light/flood ligh/highbay light issued by MES for free for fixing. Note: (a) Old unsv light will be deposited to E&M Yard. (b) Necessary T&P required to replace the light shall be arranged by Contractor without any extra cost. (c) Flood light/tower light/hibay light will be issued by the Department under Schedule 'B' i.e. free for fixing.

Taking down old unserviceable LED /flood light fittings or any type, any capacity from pole 7.5 to 9 mtr high/High Mast/tarmic ligh and replace it with new LED street light/flood ligh issued by MES office free for fixing. Note: (a) Old unsv light will be deposited to E&M Yard. (b) Necessary T&P required to replace the light shall be arranged by Contractor without any extra cost. (c) Flood light/tower light/hibay light will be issued by the Department under Schedule 'B' i.e. free for fixing.

Dismantling and taking down old/unsv insulator of any type any size from pole/stay for reuse at site or carrying to store for sch of credit complete all as specified and directed.

S&F in replacement pin type, porcelain, vitreous, brown, including one galvanised mild steel spindle, two galvanised iron washer and one galvanised iron nut, 100mm height and 65 mm dia for 1100 volts grade all as specified and directed..

S&F in replacement shackle type,porcelian vitreous white, brown or green insulator including galvanised mild steel straps , washers, insulators bolts ,washer and nuts of size 100 mm height and 115 mm dia for 1100 Volts grade complete all as specified and directed.

S&F in replacement Loop type insulator, porcelian vitreous brown of size 65x90mm and clearence hole 16mm all as specified and directed.

Labour only for restraining of overhead ACSR conductor of any size of 4 wire on pole after disconnecting all jumpering connection & binding of insulators and redoing all jumpering connection and insulator binding with aluminium conductor providing required T&P all as specified and directed .

Labour only for restraining of ACSR conductor of any size of 2 wire on pole after disconnecting all jumpering connection & binding of insulators and redoing all jumpering connection and insulator binding with aluminium conductor providing required T&P all as specified and directed.

Labour only for restraining of GI guard wire of any size on pole after disconnecting all binding on cross arms and redoing all bindings providing required T&P all as specified and directed

Cutting/Trimming of tree branches arround 3.00 mtr distance from conductors of LT over head line of span up to 40 meters including removing of creepers/vegitation etc from poles

M&L for painting of Steel pole up to 7.5 mtr height including cross arms, clamps, stay clamps etc with one coat of Epoxy zinc phosphate primer and two coats of PU based aluminium silver paint with yellow/black/white strip (30 cm width) after surface preparation by scraping the old paint with wire brush, grinder & cleaning the rust of the pole. Complete all as specified and directed by Engr-in-Charge.

Writing letters or figures not exc 40 mm high on LT Poles with radium sheet on white back ground. Complete all as directed by Engr-In-Charge

Supply and fix in replacement Heat shrink straight through joint LT 1100 volts grade 6 sqmm, 2 core.

Supply and fix in replacement Heat shrink straight through joint LT 1100 volts grade 10-16 sqmm, 2 core.

Supply and fix in replacement Heat shrink straight through joint LT 1100 volts grade 10-16 sqmm, 4 core.

Supply and fix in replacement Heat shrink straight through joint LT 1100 volts grade 25-50 sqmm, 4 core.

Supply and fix in replacement Heat shrink straight through joint LT 1100 volts grade 70-150 sqmm, 4 core.

S&F surface mounting time switches, daily dial, , incl dismentling taking down unsv one.

S&F in replacement 3 pole power contactor, 415 Volts, 40 amps, incl dismentling taking down unsv one.

Supply and fix GI tubing light grade 40mm bore on pole /wall with necessary clamps,nuts,bolts and washers/under road crossing ISI marked, for cable protection incl dismentling taking down unserviceable one all as specified and directed

Supply and fix GI tubing light grade 50mm bore on pole /wall with necessary clamps,nuts,bolts and washers/under road crossing ISI marked, for cable protection, ISI marked for cable protection incl dismentling taking down unserviceable one all as specified and directed

M & L as in replacement for three core PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 1.5 sqmm (Nominal area) drawn through exisitng PVC Conduit from street light to pole box. Complete all as specified and directed.

Supply and fixing 1100 volts grade heavy duty flat twin core cable PVC insulated with stranded aluminium conductor of size 2.5 sqmm and overall PVC sheathed in service connections from OH conductor to building/street light to pole box incl dismentling taking down unserviceable one all as specified and directed.

All as per item No. 48 here-in-before but 4 sqmm core complete all as specified and directed.

All as per item No. 48 here-in-before but 6 sqmm core complete all as specified and directed.

Supply and fix jumper connections of length up to 1.50 mtr with existing size and guage of ACSR, binding with existing conductors for LT OH lines complete as directed by the Engr-In-Charge.

S & F as in replacement street light pole box (SMC) of size 25x25x15 cm with side hinged door and locking arrangement type suitable for fixing on LT pole and suitable for terminal single phase including MCB 6-10A SP and fixing in position with nut, bolt, clamp, disconnection and reconnection of service wire/UG cabel in box. Complete all as specified and directed.

M & L for street light bracket, made out of 40 mm dia GI pipe, (medium grade) 1.5 metre long bend to shape as required with nut bolt and clamp and fixing in position incl dismentling taking down unsv complete all as specified and directed.

Supply & fix as in replacement LED 45W street light, pressure die-cast housing with toughened glass and high power LED's with secondary optics and IP 65 protection and efficiency>= 110 Lumens per watt . Complete all as specified and directed.

All as per item No. 54 here-in-before but 60 watt but IP-66 protection and with 10 KV SPD. Complete all as specified and directed.

All as per item No. 54 here-in-before but 70 watt but IP-66 protection and with 10 KV SPD. Complete all as specified and directed.

All as per item No. 54 here-in-before but 90 watt but IP-66 protection and with 10 KV SPD. Complete all as specified and directed.

S&F LED flood light fitting 120 watt made of pressure die cast aluminium housing with toughened glass and high power LED's and secondary lenses with IP-66 protection system efficiency>= 110 Lumens per watt. Complete with all fittings incl 1.5 sqmm three core copper flexible conductor cable incl dismentling. Compelte all as specified and directed.

S&F LED flood light fitting 150 watt made of pressure die cast aluminium housing with toughened glass and high power LED's and secondary lenses with IP-66 protection system efficiency>= 110 Lumens per watt. Complete with all fittings incl 1.5 sqmm three core copper flexible conductor cable incl dismentling. Complete all as specified and directed.

Labour for disconnecting LT cable of any size from DBs/Panel/pole/transformer for finding fault for defect rectification. LT cable laid in trenches or any location by locating fault with the help of electronic fault machine comprising of surge generator pulse, ECHO fault locator with high frequency distance calculator etc. The entire repair work to be completed with in 12 hours of instruction from Engr-in-charge. Note:- Complaint will be notified to contractor on mobile phone at any time between 0900 to 1700 Hrs and has to be rectified within 12 hours after notification, failing to which Rs. 500/- per day per complaint will be recoverd. fault locating with electronic fault locator, excavation and earth work, disconnecting and reconnecting both end of cable, relaying of sand and protective cable covers are deemed to be included in the quoted rate all as specified and directed by Engr-in-charge. joint kit will be measured seperately in appropriate item in this schedule

Labour only for disconnecting LT cable of any size from pole /transformer panel and re-connecting of cable at both end after removing carbon /burnt insulation part of cable by cutting refixing cable with new cable lugs . The entire repair work to be completed with in 06 hours of instruction from Engr-in-charge as specified. Note: - (a) Contractor will submit complaint register and slip verified by Engineer in Charge for payment purpose. (b) Contractor/Supervisor will take the complaint from complaint cell at 09:00 AM on daily basis and has to be rectified within same day after taking complaint slip, failing which Rs 250/- per day per complaint will be recoverd.

Taking down defective LED street light fittings any type, any capacity from poles and bringing down to ground, carry out necessary repair work including replacement of defective spares required, testing on ground and refixing in its original position to the entire satisfaction of Engr-In-Charge. Note: - (a) Necessary T&P required to replace the defective parts shall be arranged by the Contractor without any extra cost. (b) Contractor/Supervisor will take the complaint from complaint cell at 09:00 AM on daily basis and has to be rectified within same day after taking complaint slip, failing which Rs 100/- per day per complaint will be recoverd. (c) Spares required for the repairs will be measured and paid seperately under relevant items of this schedule. (d) Small items such as clamps,nut,bolts and washers are inclusive of quoted rates.

Supply only LED driver of 15/18/25/30 watt for Ser item No 62 suitable for LED security light.

Supply only LED driver of 40 to 60 watt for Ser item No 62 suitable for LED security light .

Supply only LED driver of 70 to 90 watt for Ser item No 62 suitable for LED security light, highbay light and flood light.

Supply only surge protection devices for item No 62 compatible with industrial and outdoor LED fixtures all as specified and directed.

M & L for rigid non-mettalic PVC conduit of size 20mm inclusive of all fittings i.e. tees,bends,elbows, bell mount tube ends and fixing accessories such as couplers, lock nuts,saddles, pipe hooks etc complete all as specified and directed

S&F as in replacement MCB, Single Pole, 6 to 32 amps, 240 volts, 10 kA breaking capacity, "C" curve. Complete all as specified and as directed.

S&F as in replacement MCB, Double Pole, 6 to 32 amps, 415 volts, 10 kA breaking capacity, "C" curve. Complete all as specified and as directed.

S&F as in replacement MCB TPN 25 to 63 Amps, 415 volt 10 KA. Complete all as specified and directed by Engr-in-Charge.

S&F as in replacement LED flood light fitting 200 watt complete with all fittings incl suitable size three core copper flexible conductor cable. Complete all as specified and directed.

S & F Automatic street light switch nature for street lights based on LUX level of natural light. The sensor (Nature Switch) dual operating along with suitable Power contactor, MCB and support Terminals enclosed in pole/wall mountable enclosure made of Rust proof, Electric shock proof,Termite proof and FR grade special moulding compound (Sintex make SMC junction box) conforming to IP54. The contactor, MCB and circuit wiring should suitable enough to take load of 8 kW single phase load, Contactor rating 25 Amps (3 pole), MCB (Single pole) Rating 32 Amps complete all as specified and directed by Engr-in-Charge.

S & F Automatic street light nature switch for street lights based on LUX level of natural light. The sensor (Nature Switch) dual operating along with suitable Power contactor, MCB and support terminals enclosed in pole/wall mountable enclosure made of Rust proof, Electric shock proof,Termite proof and FR grade special moulding compound (Sintex make SMC junction box) conforming to IP54. The contactor, MCB and circuit wiring should suitable enough to take load of 12 kW load equally distributed over three phase load, Contactor rating : 40 Amps (3 pole), MCB (Single pole) Rating 40 Amps complete all as specified and directed by Engr-in-Charge.

Contract Amount shall be derived after deducting the amount of Schedule of Credit in General Summary on serial page No 17 of tender documents.

M/S VIDIT ENTERPRISES (BID ID -3408341)

MAJOR REFREGERATION AND ELECTRICALS (BID ID -3415468)

M. S. CONTRACTOR (BID ID -3407683)

Truly Technos LLP (BID ID -3405134)