RequiredExperience with Government
RequiredAnnual Turnover
RequiredOEM Authorization Certificate
RequiredOEM Annual Turnover Bid to RA enabled No Twister - Outdoor Gym Equipment ( 1 pieces ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Bid Requirement (Allowed Values) TYPE Type Triple Twister ( Three standing ) Double Twister ( Both Standing )
RequiredDouble Twister ( Both Sitting )
RequiredDouble Twister ( One standing and one sitting )
RequiredTriple Twister ( Three standing )
RequiredTriple Twister ( Three Sitting )
RequiredTripple Twister ( Two standing
Requiredone sitting )
RequiredTripple Twister ( one 1/6 standing
Requiredtwo sitting )
RequiredSingle Twister Standing
RequiredSingle Twister Sitting SIZE/DIMENSIONS Length 1700 * Width 1350 * Height 1359 * CAPACITY Maximum User Weight ( Kg ) 120 100
Required110
Required120 MATERIAL Governing Specification for GI Pipes BIS specification No IS 1161:2014
Requiredlatest BIS specification No IS 1239 ( Part 1 )- 2004
Requiredlatest
RequiredBIS specification No IS 1161:2014
Requiredlatest All the GI Pipes are ISI marked Yes Yes
RequiredNo Main Central Pipe 100mm Nominal Bore G.I. Pipe 80mm Nominal Bore G.I. Pipe
Required100mm Nominal Bore G.I. Pipe
Required125 mm Nominal Bore G.I. Pipe
Required150mm Nominal Bore G.I. Pipe Main Frame Pipe
RequiredClass as per IS 1239 Heavy Medium
RequiredHeavy
RequiredNot applicable for pipe as per IS 1161 Main Central Pipe ( As per Clause 3
Requiredof IS 1161 ) Nominal Bore & Wall Thickness 100 mm NB with 5.4 mm Thickness * Grade Material as per table 2 of IS 1161 Not Applicable YSt 210
RequiredYSt 240
RequiredYSt 310
RequiredYSt 355
RequiredNot Applicable Standing/Sitting Twister Frame Pipe 32 mm Nominal Bore G.I. Pipe 25 mm Nominal Bore G.I. Pipe
Required32 mm Nominal Bore G.I. Pipe
Required40 mm Nominal Bore G.I. Pipe
Required50 mm Nominal Bore G.I. Pipe Standing/Sitting Twister Frame Pipe
RequiredClass as per IS 1239 Heavy Medium
RequiredHeavy
RequiredNot applicable for pipe as per IS 1161 Standing/Sitting Twister Frame Pipe (As per Clause 3
Requiredof IS 1161 ) Nominal Bore & Wall Thickness 32 mm NB with 4 mm Thickness * Grade Material as per table 2 IS 1161 Not Applicable YSt 210
RequiredYSt 240
RequiredYSt 310
RequiredYSt 355
RequiredNot Applicable 2/6 Rotating Disk Support Pipe at Bottom Pipe 80 mm Nominal Bore G.I. Pipe 80 mm Nominal Bore G.I. Pipe
Required100 mm Nominal Bore G.I. Pipe
Required125 mm Nominal Bore G.I. Pipe
Required150 mm Nominal Bore G.I. Pipe Rotating Disk Support Pipe
RequiredClass as per IS 1239 Heavy Medium
RequiredHeavy
RequiredNot applicable for M.S. Plates and Pipes as per IS 1161 Rotating Disk Support Pipe ( as per IS 1161 ) as per Clause 3
RequiredNominal Bore & Wall Thickness 80 mm NB with 4.8 mm Thickness * Grade Material (as per table 2 of IS 1161 ) Not Applicable YSt 210
RequiredYSt 240
RequiredYSt 310
RequiredYSt 355
RequiredNot Applicable Handle Frame Pipe 32mm Nominal bore G.I. pipe 25mm Nominal bore G.I. pipe
Required32mm Nominal bore G.I. pipe
Required40 mm Nominal bore G.I. pipe Handle Frame Pipe
RequiredClass as per IS 1239 Heavy Medium
RequiredHeavy
RequiredNot applicable for pipe as per IS 1161 Handle Frame Pipe ( as per IS 1161 ) as per clause 3
RequiredNominal Wall & Thickness 32 mm NB with 4 mm Thickness 25 mm NB with 2.6 mm Thickness
Required25 mm NB with 3.2 mm Thickness
Required25 mm NB with 4 mm Thickness
Required32 mm NB with 2.6 mm Thickness
Required32 mm NB with 3.2 mm Thickness
Required32 mm NB with 4 mm Thickness
Required40 mm NB with 2.9 mm Thickness
Required40 mm NB with 3.2 mm Thickness
Required40 mm NB with 4 mm Thickness
RequiredNot Applicable Grade Material per table 2 of IS 1161 Not Applicable YSt 210
RequiredYSt 240
RequiredYSt 310
RequiredYSt 355
RequiredNot Applicable Foundation Pipes with anchoring 500mm deep GI Pipe
Requiredsupported with M.S. Angle 25 X 25 X 4mm 750mm deep GI Pipe
Requiredsupported with M.S. Angle 25 X 25 X 4mm
Required500mm deep GI Pipe
Requiredsupported with M.S. Angle 25 X 25 X 4mm Nominal Bore of 80mm 80mm
Required100mm
Required3/6 Foundation Pipe 125mm
Required150mm Foundation Pipe
RequiredClass as per IS 1239 Heavy Medium
RequiredHeavy
RequiredNot applicable for pipe as per IS 1161 Foundation Pipe Pipe ( as per IS 1161 ) as per clause 3
RequiredNominal Wall & Thickness 100 mm NB with 5.4 mm Thickness * Grade Material (as per table 2 of IS 1161) Not Applicable YSt 210
RequiredYSt 240
RequiredYSt 310
RequiredYSt 355
RequiredNot Applicable M S Foundation Plate Thickness 12 10
Required12 Galvanization of all Pipes Zinc coating on the tubes shall be in accordance with IS 4736 latest. * Movement must be supplied with bearings Yes * Bearings Ball Bearing Ball Bearing
RequiredTapered Roller Bearing Bearings shall be self lubricating and sealed for protection against Rain and dust etc Yes * Nuts and Bolts for Assembly G.I. * Foot Rest C.I. Fibre Reinforced Plastic
RequiredAluminum casting material
RequiredC.I.
RequiredLDPE
RequiredHDPE
RequiredNylon Closing Caps of open ends of the pipes
Requiredbearings
Requiredbushes and base G I Caps * Thickness of closing caps ( min ) 2 * All Plastic Components U V stabilised
Requiredweather resistance * COLOUR Colour Green * Paint/Finish Powder Coated
RequiredUV resistant * Paint Coating Thickness ( min ) 80 * OTHER REQUIREMENTS Other Requirement Ergronomic Design
RequiredEquipment shall be free from entrapments and * 4/6 sharp edges
RequiredInstallation Instructions must be provided Installation Included Included
RequiredNot Included Safety and quality Requirements European Standard EN 16630: 2015 latest * Instruction Plate Stainless Steel
RequiredSize 150 X 230 X 0.7mm
Requiredwith indelible printing * CERTIFICATION Certfication ( Safety and Quality Requirements ) As per European Standard EN 16630 As per European Standard EN 16630
RequiredNo Registration No and Validity of Registration - * APPROVAL Drawing depicting detailed dimensions and foundation details shall be got approved from buyer before installation
Requiredif desired by buyer Yes * WARRANTY Warranty ( years ) 2 2
Required3
Required4
Required5 * Specifications highlighted in bold are the Golden Parameters. * Bidders may note that In respect of non-golden Parameters
Requiredthe specifications 'Values' chosen by Buyer will generally be preferred over 'Bid requirement ( allowed Values) by the Buyer. Additional Specification Documents
