WBPWD/EE/KNHED/NIQ-44/21-22

Amount

S.I.T.C. Of Cubicle type fully compartmentalised free standing L.T.Panel Board with multitier arrangement having rigid & self supporting structure made out of 16 SWG CGCA sheet with powder coated painting including IP-55 protection combined with louvre arrangement ai side and cable entry at bottom of the panel and cable exit at the top of the panel with two sided cable alley. All incoming & outgoing SFU's are to be open execution & housed in respective compartments with hinged and gasketted doors at the front. All the doors should have panel lock arrange- ment for dust & vermin proof . All vertical/horizontal bus bar chambers are to be properly arranged & all electrical awitches, bus bars o be fixed MS nut,

bolts on suitable hylam board /non-hygroscopic insulator of adequate size and dimensions. Panel should be incorporated with the following electrical accessories complete with all necessary connections and inter-connections by suitable size of copper flat bar/PVC insulated copper wire (Single core 50sq mm & 95 sqmm) as directions of E.I.C. Incoming:- (a).415V. 315 A. 4-pole on load change over switch (L.T.cat No.no. 32500OOOO)..ABB/Siemens..... 01 No. Bus Section :- .440V. 600 Amps.4-bar Busbar chamber of electrolytic tinned cpper bars (99.9%) supported on non-hygrocopic insulated chairs with colour codeing)................... 01 No.

Outgoing: - (c). a)415V. 160A. TPN SFU with 3nos. HRC fuses (L.T.cat. No.SK 95568) of open execution type..ABB/Siemens........02 Nos. b). 415V. 125 Amps. TPN SFU with 3nos. HRC fuses (L.T. cat.No.SK 95421)/ABB/Siemens....... 2 Nos Instruments:- - (a).600/5Amps. C. T.(Make:AE/Kappa)..................... 03 Nos. (b).Multi Function Meter (L.T.cat.no. WL 441011OOOO).... 01 No. (c). LED Source indicating lamp (L.T. make/R,Y,B).............. 03 Nos. (d).6Amps.2 -pole Toggle Switch (Supewrior quality)..... 03 Nos. (e). 6Amps. HBC fuse carrier with 2Amps.pencil type HRC fuses (L.T. Make)................................ 03 Nos. . (f). 6" X 4 " E.I, Danger Board............. ....01 No.

Supplying and fixing double door Horizontal TPN MCB Distribution board with IP-42/43 protection, on wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment Make-Legrand/ Siemens as to GS 4 way Enclosure (607715)

Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, concealed on wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment Make-Legrand / Siemens ,2+12 way Enclosure (607712) as to GS

Supplying and fixing 240/415 V Isolator on din rail of existing DBs and necessary connection Make-Legrand/ Siemens, as to GS. i) 415 V, 100A FP for PBDB

ii) 240 V, 40A DP for LBDB

Supplying and fixing 240/415V, MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection Make-Legrand/ Siemens/L&T as to GS. i) 6A - 32A SP MCB for PBDB & LBDB

Supplying and Laying of following sizes Al. armoured PVC/XLPE cable surface on wall / on wall by clamp (Havells/Glostar/Polycab) with 2X10 SWG GI wire as per direction of EIC i) 4 core 185 sqmm for new AC pannel at Administrative Building.

ii) 4 core 35 sqmm

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below : i) 4 core 185 sqmm

ii) 4 core 35 sqmm

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials : i) 4 core 185 sqmm

ii) 4 core 35 sqmm

Distribution wiring in 2 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Finolex/ Havells/KEI approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, with drop Concealed type if reqd as per direction of EIC to light/fan/call bell points with Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall complete with 2 no. suitable size “Ph & N” copper bar incl. bakelite/Perspex (wall matching color) top cover 3 mm thick and incl. 175mmx100mmx65mm inspection box, making earthing attachment, painting the MS box and mending good the damages to original finish as to GS Av. run 8 mtr

Distribution wiring in 2 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Finolex/ Havells/KEI approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, with drop Concealed type if reqd as per direction of EIC to 5A 3 pin flush type plug socket & piano key type switch (Anchor make) fixed on sheet metal (16 SWG) switch board with bakelite/perspex (wall matching colour) top cover (3 mm thick) flushed in wall incl. mending good damages to original finish as per G S i) On Board

ii) Separate plug (average run 7.5 mtr)

Supply & drawing of 1.1Kv.gr. 4X16 Sq. mm.+2x 10 sq.mm. PVC Cu.wire through PVC rigid conduitof 25mm.dia. (Precission make) on surface from Panel to AC Outdoor including saddle as per direction of EIC (Make: Finolex/Havells/KEI).

Supply & Fixing of following plug socket with separate Piano key type switch (Brand approved by EIC) on suitable sizes (16SWG) sheet metal switch board on wall incl. S & F bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required as to GS. i) 2 x 5 A Piano key type switch & Socket ( Separate Plug)

ii) 4 x 5 A Piano key type switch Socket , fuse & Indicator ( Separate Plug)

iii) 1 x 15/20A Piano key type switch & Socket

iv) 1 x 15/20A + 3 x 5 A Piano key type switch ,Socket , fuse & Indicator

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (make-Finolex/Havells/KEI) in 20mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required i) 2 x 1.5 sqmm + 1 x 1.5sqmm (for Separate Plug)

ii) 2 x 2.5 sqmm + 1 x 1.5sqmm (for Power plug)

iv) 2 x 6 sqmm + 1 x 4 sqmm (For SPN BDB )

Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes. as per G S i) 1.5sqmm

ii) 2.5sqmm

iii) 4.0sqmm

IV) 10sqmm

v)16 sqmm

S&F angular holder (Anchor) incl. S&F 100 Watt BC lamp Philips make.as per direction of EIC

Supplying & Fixing MS fan clam of two piece type for RC ceiling as per approved specification, fabricated from 40 mm x 9 mm MS flat including making good damages to building roof with satisfactory finishing and painting

Supply & Fixing Socket type fan regulator (Step type) (Anchor) on existing sheet metal switch board with bakelite/ perspex top cover by screw incl. making necy. connections etc. as per G.S.

Supply & delivery 4 feet single commercial LED type fluorescent light fittings complete with all accessories with 1 x 20 Wt.Master LED Tube lamp similar to Philips make cat No. TMC-501 P 1xTLED 22 WP3241 corresponding to( Wipro / Bajaj / Crompton /Majic) as per direction of EIC

Supply & delivery exhaust fan (Make -- EPC, Heavy duty/CG) of following sizes . length of PVC insulated wire and making connection for exhaust of dia incl. Fixing louver shutter as per GS i) 12" (30 cm)

Supply & Delivery 240V 50 Hz 48" sweep (1200 mm) ceiling fan complete with down rod ,Canopy,fork etc. with out regulator, (Make- Usha (Technix) / Crompton Greaves (HS Plus 5 star) Orient ( 5 Star ) as per direction of EIC

Supply & Delivery of 230 V, 50 HZ, 400 mm sweep full metal body wall bracket fan complete with all accessories for ready use. Make – CINNI/CGL/ORIENT/EPC/Almonard. (HSN/SAC = 8414)

Supply & Fixing of 35 W LED outdoor street light fitting ( Philips make cat No. BVP120 LED 35 CW FG SI PSU GR/CG/Wipor ) complete with all accessories to be fixed / Projected from the wall of the building / MS structure incl. making holes to the building S & F suitable size GI pipe / MS structure and making necy. connections with S& F necy. length of Copper coductor and mending goods to wall incl. painting as per direction of E.I.C. ( near Sign board )

S&F. Outdoor canopy type 10"x6"x4" (letter box) of 415V.63Amp. 4-pole MCB Isolator (Make :Legrand) box on din rail & fixed on wall with iron angle frame.

Supply and fixing of 3 phase Timer mini control panel on wall comprising of i) 415 V AC, 63A Power contractor,(2 no+2 nc) ,ii) Digital Timer Dial type analogue timer 24 hour C capacity, 230 V AC Supply. Iii) 415V ,63A ,4 POLE MCB C-type, iv) 230 V AC toggle switch Single pole double through ,6 A 230 V , V)415 V ,63 A , 3 way terminal vi) 15 A , 8 way phase & nutral bar to be mount on DIN rail with necessary inter connection with 1.5 (control & sq.mm cu flexible 16 sq.mm(power) wire( finolex/havels/KEI) Including ferrule marking & Socketing with in the 16 way SPNDB MCB Enclosure Box Material Legrand & LT

S & F of 240/415 V, 63 A 4pole MCB isolator on din rail of existing DBs & necessary connection ( make- Legrand, Cat no-40652

(Rate should be quotated including all taxes and duties)

ALPHA ELECTRICALS

M/s Singh Electrical Works