EXTENSION OF GREASE PLANT RCC SHED @ SLP

Supply & fix of turbo ventilators — Supply and Installation of Stainless Steel Turbo Ventilator of 24" (600m) size complying to specification as under No. of Fins – 40-44 blades Fan Blade, Connecting rods, Axle support, Rotary axle- SS 304 Top <(>&<)> Bottom- 0.7mm SS 304 FAN Blade OD- 750-780mmSS 304 ring Bottom Ring- 600-610mm SS 304 Total Fan height -350-480mm Double Ball bearing –Dust proof, Permanent lubricated, maintenance free FRP Base Plate: suitable size, overall min. 2mm thickness with spout Storm Test and capacity of bearing storm –Suitable for wind velocity up to 50m/s Life Span of Product – Minimum 15 years Warranty – Minimum 5 years Rate to include cutting the Galvalume Sheet, fixing the FRP base plate with spout perfectly matching with the roof sheet profile, riveting the turbo ventilators with Self Tapping screws <(>&<)> then sealing the edges of the base plate with water proof sealant, complete in all respect.

Supply & fix of rolling shutter — Supplying, fabricatiing and fixing of rolling shutters 80 x 1.25mm thick MS laths, push and pull hand operated with mechanical device chain and crank operation and with ball bearing arrangementof approved make, as per IS:6248, made of MS laths interlocked together at the end by end locks mounted on specially designed pipe shaft with brackets, side guides and arrangement for inside and outside locking, top cover, spring and complete with two coats of synthetic enamel paint of approved shade and colour over a primer coat, making chases in wall/floor,grouting the clamps in PCC - M15 (20mm down size aggregate) all complete as per specifictions, drawings and instruction of Engineer.Finishing with Epoxy paint (two or more coats)on steel work at all locations prepared and applied as per manufacturer's specifications including Zinc chromate as primer, preparation of surface, etc. complete

Supply & fix of aluminium — Providing and fixing in position anodized aluminum glazed window/ventilator of "INDAL" / "JINDAL" / "HINDALCO" standard extruded section or approved equivalent make (size 40mmx44mmx1.4mm) in single or composite units, fixed/louvred/ sliding type comprising standard aluminum extruded sections and 5.5mm thick float glass including fixing the frames with lugs and glass with aluminum glazing beads and mastic, to shutter and frames, with all fitting in glazed portion, such as stays, locking arrangements, handles, tower bolt etc. including providing 2 mm thick approved quality rubber sealing around window/ventilator all complete as per specifications and drawings and directions of the Engineer.

Supply & fix of aluminium window 4512-SILVASA LUBE TML — Supply and fixing of 18 SWG anodized aluminium window with 5.0mm glass in 3 track with wool,Rubber and locking arrangements.

Supply & fix of granite frame — Supply and fixing of 16mm Black granite window frame 150mm thick in single patti with edges moulding.

Supply & fix of rainwater pipe — Supply <(>&<)> Fixing of 6" depth circular shape Downtake pipe made with 0.55-0.60mm thick colour coated zinc aluminum alloy coated steel sheet. The scope includes supporting the pipe @ 750-1000mm c/c, providing sealing arrangement at gutter junction and pipe joint etc all complete.

Painting of the shed — Providing and applying two coats of emulsion paint (on interior and exterior wall) Dulux Professional Weathershield Flex from Akzonobel Dulux or equivalent make Ultima protect longlife (Asian Paints/Weathercoat (berger) of approved shade, at all locations over and including a priming coat over wall surface, bands, parapet etc., including preparation of surface complete with all bye works complete as per specification and direction of the Engineer. The scope includes preparation of surface with 2 coats of wall care putty on plastered surface of exterior/interior grade and making it smooth and suitable for painting. One coat means painting the surface first with vertical stroke, followed by horizontal stroke. Each coat shall be allowed to dry before next one is applied. Further each coat shall be inspected and approved by the Site-in-charge before the subsequent coat is applied. The job to be executed as per attached technical specifications, job procedures etc. complete and as directed by EIC.

SITC-Earth Pit — Supply,Erection , connection to earth ring main, testing and Commissioning of Earthing Pit/ station, conforming to tender specn. and drawings inclusive of associated components materials like heavy grade G.I pipe (65 mmdia X 3.0m long) GI Clamp , electrode assembly , charcoal, salt, sand,good quality earth, C.I lifting cover ( 500 X 500 mm atleast 6 mm thick plate painted with coal tar of atleast 365 m icrons thick with lifting hook ) and civil work involved in excavation, back filling and construction of brick chamber (with required PCC , plaster ) etc com plete including the fixing of markers ( markers shall be as per the the following : Board m aterial - 18" X 9" Alum inium com posite panel (white); Lettering - 3M vinyl 3630-22 ; Frame - M S white pipe, powder coated; structural support - 1" square pipe, powder coated ).Max Earth Resistance values should be as per OISD Standard. The scope includes making connections with main grid and all works shown in drawing.

SITC-GI Earth strips 50*6mm — Supply, Fabrication and installation and connection of GI earthing strip inside buried cable trenches or cable trays or fixing to walls or structures including welding at joints, providing anti-corrosive paint or bitumen and jute covering for welded portion, clamping and necessary hardware for connecting including drilling holes etc., including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-i n-Charge. The scope includes excavation of trench 500mm deep, backfilling, surplus earth disposal, required for laying the earthing strip

Supply & laying of 10mm GI wire — Supply of 10mm G.I. wire rope including necessary hardware, tinned copper lugs, nuts, bolts, washers for connection,including crimping, and other hardware for connection as per approved drawings and directions of Engineer-in-Charge for earthing of Lighting Distribution Board etc