Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹45.7 LAccepted-AOC C 56 6 ANAND VIHAR COMMERCIAL COMPLEX MAHOLI ROAD MATHURA UP PIN 281004 | MATHURA | UTTAR PRADESH | 281004 | L1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L2₹45.9 L+₹8,646 (0.19%)Rejected-Finance 37 PUNJABI COLONY NEAR RAILWAY CROOSING ARYA SAMAJ ROAD MATHURA U P | MATHURA | MATHURA | UTTAR PRADESH | 281001 | L2 | Rejected-Finance NOT LOWEST BIDDER | |
| 3 | L3₹48.7 L+₹2.9 L (6.29%)Rejected-Finance PLOT NO 17 GF PRATAP NAGAR NEW DELHI 110064 | WEST | DELHI | 110064 | L3 | Rejected-Finance NOT LOWEST BIDDER | |
| 4 | L4₹53.5 L+₹7.7 L (16.8%)Rejected-Finance | L4 | Rejected-Finance NOT LOWEST BIDDER |
Tender Value
₹49.2 L
EMD Value
₹98,390
Closing Date
1 Jul 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Maj Mathew M Shepherd
GE (WEST) MATHURA
PROVN OF DEFICIENCY GEYSER AT JCOS ORS MD ACCN AND OTHER SANCTIONED WORK UNDER GE WEST MATHURA
2024_MES_653739_1
8300/1228/E8
Open Tender
Civil Works
Item Rate
180 days
GE (WEST) MATHURA
AS PER NIT
9 documents required · 9 mandatory
₹500
GE (WEST) MATHURA
₹98,390
Yes
10 Sept 2024
10 Jun 2024
8 Jul 2024
10 Jun 2024
1 Jul 2024
17 Jun 2024
Amount
M&L for Sub main wiring with 2 runs of 4 sqmm single core PVC insulated but unsheathed multistranded copper conductor FRLSH 1100 volts grade cable drawn through and including PVC conduit ISI marked 25mm dia(external) with wall thickness not less than 1.8mm with conduit accessories fixed on wall/roof and one run of 4 Sqmm single core PVC insulated but unsheathed multistranded copper conductor FRLSH 1100 volts grade cable as earth conductor complete all as specified and directed. Note : Two runs of 4 Sqmm cable, one run of 4 Sqmm earth conductor and one run of PVC conduit of 25mm dia shall be measured and paid as one unit length.
S&F switch socket combination 2 in 1, 3 pin, 6 and 16 Amp, flush type universal complete all as specified and directed by Engineer-in-charge.
M&L for Cutting existing steel tubing and taking up for tapping / termination of pipe line, screwing existng steel tubing of size 15mm dia, complete all as specified and directed.
S&F 15mm bore galvanized steel water tubing medium grade with & including all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed by Engineer-in-charge.
S&F 20mm bore galvanized steel water tubing medium grade with & including all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed by Engineer-in-charge.
S&F 15mm dia angle cock cast copper alloy, fancy type with, chromium plated long shank and cup (concealed type) with crutch or butterfly handle screwed down high pressure, screwed both ends for iron pipe complete all as specified & directed by Engineer-in-charge.
S&F 15 mm bore bib tap, cast copper alloy, chromium plated, fancy type screwed down and screwed for iron pipe or for brass ferrule complete all as specified and directed by Engineer-in-charge.
Supply, installation, testing & commissioning of electric storage water heater of 25 litre capacity, rated voltage -230 VAC, single phase, 50 Hz of rated power input-2000 Watt conforming to IS 2082 with standing loss ≤ 0.511 & ≥ 0.465 KWh/24Hr/45°C (4 Star BEE rating wef 01 Jan 2023) having feroglas dry powder coating in water stoarge tank of ultra thick super cold rolled steel plates of high-strength, sock - proof ABS body using IPX4 technology to protect electrical parts from water splash whirlflow technology to avoid direct contact between cold and hot water flow, glass coated incoloy heating element for good corrosion resistance with execllent resistance to both oxidation and carbonization, feather touch panel for temperature setting between 25°C to 75°C to control energy consumption, digital display with 3 preset controls for easy operation, energy saving high density thick PUF insulation for better heat Cont/-
Cont/- retension, having sacrificial magnesium anode rod with steel core to protect water tank from rust and corrosion to enhance the tank life, having safety feature like thermostate, thermal cut off, multifunction valve, shock-safe plug to prevent electric shocks by cutting off the power in case of current leakage suitable for high-rise buildings of 8 bar (0.8 Mpa) pressure including fixing & connecting accessories like mild steel anchor fastener of size 10 x 100mm with nuts and washers, drilling/making hole on wall with provision of stainless steel breaded (SS 304 Graded) connection pipe (01 Pair) in 600 mm long for hot & cold water circulation with nuts and washers and testing thereafter complete in all respect complete all as specified and and directed.
Supply, installation, testing & commissioning of inverter type split Air Conditioner (hot and cold), 5-in-1 convertible, PM 2.5 Filter with activated Carbon, with indoor , outdoor unit, full function wireless remote and auto restart feature, interconnecting copper tubing, insulation, interconnecting wiring etc in complete as per site requirement to provide rated cooling and heating as per specification laid as below:- (i) Rated Tonnage Capacity Range : 2.00 TR (ii) Rated Cooling Capacity in Watt : 6400 (Min - 2231 to Max - 7292) (iii) Rated Heating Capacity in Watt : 6400 (Min - 2238 to Max - 6772) Cont/-
Cont/- (iv) Rated Voltage : Single Phase 230 V ± 10%, 50 Hz (v) Rated Power Input (Cooling / Heating) : 2110/1900 Watt (vi) Rated ISEER : 4.0 to 4.39 (vii) Technology of air conditioner : Inverter Technology / twin rotary. Design of AC ambient temp -2ºC to 52ºC (viii) Function : Cooling, De-humidification and Heating (ix) BEE Star rating : Minimum 3 star rating or above as approved (as per specification of BEE effective from 1st July 2022) (x) Cooling/Condensing Coil : 100% Copper (xi) Indoor Noise Level : upto 48 dB (xii) Compressure type : DC/AC inverter-return cooled/Twin Rotary or equivlent
S&F wall mounted voltage stabilizer of capacity 5 KVA in digital display for automatic operation with high/low cut off with TDR, single phase naturally air cooled indoor type & designed for input variation between 100 Volts to 290 Volts with output voltage stabilzed at 230 Volts with accuracy of (+/-) 2.5% complete all as specified and directed.
S&F sheet metal enclouser with a two pin and earth plug and socket complete with one single pole MCB upto 32 Amps, 240 volts capacity and tested on completion complete all as specified and directed.
S & F MCB DB with sheet metal enclosure MCB DB SPN 4 way with 200 amps rated bus bar 240 volts double door with isolated Neutral Bar & Shrouded bus bar IP protection 43 having door earthing complete all as specified and directed.
S&F MCB SP 240 volts, 06-32 Amps 10KA, 'C' Series complete all as specified and directed.
S&F MCB SPN 240 volts, 40-63 Amps, 10KA, 'C' Curve complete all as specified and directed.
S&F Sub main wiring complete with 4 single core 10 Sqmm (Nominal area) multi stranded copper conductor PVC insulated unsheathed cable FRLSH drawn in and including heavy duty PVC conduit ISI marked not less than 40mm dia concealed including single core multistranded copper conductor 10 Sqmm size cable as earth continuity wire drawn in same conduit complete all as specified and directed by Engineer-in- charge. Note : Four runs of 10 Sqmm single core cable and one run of 10 sqmm copper wire earth continuty conductor and conduit with fittings shall be measured as one length.
S&F Sub main wiring complete with 4 single core 4 Sqmm (Nominal area) multi stranded copper conductor PVC insulated unsheathed cable FRLSH drawn in and including heavy duty PVC conduit ISI marked not less than 20mm dia concealed including single core multistranded copper conductor 4 Sqmm size cable as earth continuity wire drawn in same conduit complete all as specified and directed by Engineer-in- charge. Note : Four runs of 4 Sqmm single core cable and one run of 4 sqmm copper wire earth continuty conductor and conduit with fittings shall be measured as one length.
M&L for earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6mm thick burried directly in ground not less than 2.25 mtrs deep below normal ground level with top edge of the plate not less than 1.5 mtrs below normal ground level, surrounded from all sides with mixture of charcoal and common salt, connected to galvanized earth lead wire 4.00 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel protected by galvanised iron light grade 15 mm dia pipe and GI pipe 20mm light grade for water filling including 15x20mm reducer socket funnel wire mesh, RCC cover with concrete 1:2:4 using 8 mm# bar@100 mm c/c both ways ,PCC chamber pit with PCC (1:3:6) type C-2 and excavation and earth work, disposal of suplus spoil to a dstance not exceeding 50 mtrs all as specified and shown on electrical plate No. 3 of 2009 (Part-I) complete all as specified and directed. Note :- The unit rate includes for protection pipe and GI wire 4mm dia from top of earth plate up to 7.5 meter above ground level.
Supplying, installation, testing and commissioning of interconnecting copper pipe / tube work with elastomeric nitrile rubber / closed cell expanded ploythene tubular insulation suitable for 1.5/2.0 TR split Air conditioner units (for sunction and discharge lines) including brazing, benching required at site complete with all fittings such as bends, tees, elbows etc as per specification. Notes : (i) The quoted rates shall include rates for chiseling, making holes through walls & making good of wall and clamps etc. (ii) One run of suction pipe, one run of discharge pipe of same length will be measured as one unit length.
S&F AC stand / heavy duty Air conditioner outdoor unit mounting bracket make as per the model complete all as specified and directed by Engineer-in-charge.
Dismantling & taking down the indoor & out door unit of unserviceable Air cooled ductable Air Conditioner of capacity 8.5 TR and 11 TR after removing all electrical and other connections including depositing to MES store yard complete in all respect as directed by Engineer-in-Charge. Note : Vehicle, ladder and other necessary tools required to taking down the indoor and outdoor unit from multi storey building should be provided by the contractor at his own cost.
Supply, installalation, testing and commissioning of Air Cooled Inverter type Ducted Hot & Cold Air Conditioner of capacity 11.0 TR/132000 BTU/Hr, rated air flow - 4400 CFM having geared type special design electronic expansion valve with 3000 steps for automated and optimised control of refrigerant flow to match the cooling and heating requirements, Refrigerant R410A, Operating temp range in cooling mode 10°C to 52°C and in Heating mode -10°C to - 24°C, suitable for electric power suplly for out door unit 415V, 3 Phase, 50Hz and Eletric power suplly for indoor unit 220V, 1 Phase, 50Hz AC supply, External finish with pure polyester powder coated GI steel as per additional specifications laid as below : Cont/-
Cont/- (A) (i) Indoor Unit Dimensions appx (WxHxD) - 1840mm X 485mm x 630mm (ii) Type of blower - Centrifugal forward curved double inlet double width. (iii) Air Filter - Non woven polyester media enclosed by HDPE mesh. (iv) Controller - Microprocessor based with touch screen handset. (B) (i) Outdoor Unit Dimensions appx (WxDxH) - 1320 mm x 420 mm x 1495 mm. (ii) Compressor type - Hermetically sealed variable speed DC inverter. Cont/-
Cont/- (iii) Condenser fan - Propeller type Make & Model : DSAI-1321R3H of Blue Star or equivalent model in Daikin, Carrier, Hitachi Note : Ladder & other T&P items as required at site for lifting & positioning/fixing the indoor & outdoor unit at multi storey building will be provided by firm at his own cost.
Supplying, laying, jointing, commissioning and testing XLPE insulated screened PVC bedded, armoured, heavy duty electric cable with stranded aluminium conductor 1100 volts grade of cross sectional area 25 sqmm 3.5 core confirming to IS-7098 (Part-I-1988) laid through wall / floors / on panels etc including taking down old unserviceable cable complete all as specified and directed by Engineer-in-charge.
M&L for iron cage made out of angle iron and MS wire mesh suitable for oudoor unit of Air conditioner (dimensions 1320mm x 420mm x 1495mm) for protection from monkeys complete including taking down old unserviceable cage complete all as specified and directed by Engineer-in-Charge. Note : (i) The frame of cage made out of angle Iron of size 50mm x 50mm x 6mm.
M&L for aluminium sliding door in ceiling n.exc 2.50sqm incl all necessary fittings such as locking fittings, handles and hinges etcwith outer section 50x50 mm, 1.5mm thick and 5mm thick ACP sheet for partiton including taking down old unserviceable shutter complete all as per site requirement complete all as directed by Engineer-in-Charge.
Supplying, installation, testing and commissioning of interconnecting copper pipe / tube work with elastomeric nitrile rubber / closed cell expanded ploythene tubular insulation suitable for 11 TR duct type Air conditioner units (for sunction and discharge lines) including brazing, benching required at site complete with all fittings such as bends, tees, elbows etc as per specification complete including taking down old unserviceable copper pipe/tube complete all as specified and directed by Engineer-in-Charge. Notes : (i) The quoted rates shall include rates for chiseling, making holes through walls & making good of wall and clamps etc. (ii) One run of suction pipe, one run of discharge pipe of same length will be measured as one unit length.
Supply, installation, testing and commissioning of CPVC drain pipe of 25 mm dia x 9 mm thick nitrile rubber insulation/closed cell expanded polythene, suitable for 10 Kg/sq cm water pressure including fitting such as bend, elbow, socket reducer etc as per specifications complete including taking down old unserviceable drain pipe complete all as specified and directed by Engineer-in-Charge.
Supply & fixing in replacement Interconnecting control cable copper conductor round sheathed of size 10 Sqmm 3 Core between indoor & out door unit suitable for 11 TR duct type Air conditioner complete all as specified and directed by Engineer-in-Charge.
Supply & fixing in replacement of MCB Triple Pole Neutral 40 to 100 amps, 415 volt, 10 KA and current carrying capacity in the DB complete with connections complete all as specified and directed.
Supply & fixing in replacement MCB DB with sheet metal enclosure MCB DB TPN 4 way with 200 amps rated bus bar 415 volts double door with isolated Neutral Bar & Shrouded bus bar IP protection 43 having door earthing complete all as specified and directed.
Material and labour for concealed type point wiring for light/fan with 2.5sq mm FR-LSH PVC insulated, unsheathed, single core multistranded copper conductor cable 1100 volts grade, conforming to IS 694 including 2.5 Sq mm FR-LSH PVC insulated unsheathed copper conductor wire as earth continuity conductor drawn through and including medium grade PVC rigid conduit not less than 20 mm dia with its accessories, galvanized pressed steel terminal boxes of thickness not less than 1.2 mm including 3mm thick laminated sheet cover with brass machine screw, washer, lugs for earthing etc and slot cutting in sheet for fixing switches/ socket/regulators etc complete all as specified and as directed. Cont/-
Cont/- Note:- (i) On RCC ceiling/column, false ceilling, AC/Metallic Sheet ceilling wiring to be done on surface with conduit/PVC casing capping and its accessories or in existing recessed conduit. (ii)The quoted rate is deemed to be included for the cutting & chasing. (iii) Cutting chases on wall for concealed the conduit shall be made good using CM 1:4 and surface finished to match the existing surface & colour and rate is deemed to be included. (iv) Maximum 08 nos of light/fan/bell points (not more than 2x6A sockets ) will have to be provided in each circuit from main MCB DB & Only 01 power point (Socket-outlets, 16 A) will have to be provided in each circuit from main MCB DB.
All as per Serial Item No 30.00 & 30.01 above here-in-before but one socket out let 5 pins 5 Amp on the independent board complete all as specified and directed.
All as per Serial Item No 30.00 & 30.01 above here-in-before but one socket out let 5 pins 5 Amp on the same board but with other switches complete all as specified and directed.
Material and labour for concealed type point wiring for light/fan with 2.5 sq mm FR-LSH PVC insulated, unsheathed, single core multistranded copper conductor cable 1100 volts grade, conforming to IS 694 including 2.5 Sq mm FR-LSH PVC insulated unsheathed copper conductor wire as earth continuity conductor drawn through and including medium grade PVC rigid conduit not less than 20 mm dia with its accessories, galvanized pressed steel terminal boxes of thickness not less than 1.2 mm including 3mm thick laminated sheet cover with brass machine screw, washer, lugs for earthing etc and slot cutting in sheet for fixing switches/ socket/regulators etc complete all as specified and as directed. Cont/-
Cont/- Note:- (i) On RCC ceiling/column, false ceilling, AC/Metallic Sheet ceilling wiring to be done on surface with conduit/PVC casing capping and its accessories or in existing recessed conduit. (ii)The quoted rate is deemed to be included for the cutting & chasing. (iii) Cutting chases on wall for concealed the conduit shall be made good using CM 1:4 and surface finished to match the existing surface & colour and rate is deemed to be included. (iv) Only 01 power point (Socket-outlets, 16 A) will have to be provided in each circuit from main MCB DB.
S&F switch piano flush button single pole, one way 6 Amp 240 Volt complete all as specified and directed.
S&F switch piano flush button single pole, one way 16 Amp 240 Volt complete all as specified and directed.
S&F socket 6 amps 5 pin flush type, 230 volts complete all as specified and directed.
S&F socket out let, 6 pin 6 and 16 amps multi purpose 2 in 1 flush type 230 volt complete all as specified and directed.
S&F ceiling rose 63x30 mm three terminal, polycorbonate body complete all as specified and directed.
S&F fan regulator electronic, five step type hum free suitable control speed of fan from 0 to 100% and connecting electrically all as required complete all as specified and directed.
S&F Angle/ batten holder polycorbonate type body suitable for batten fitting complete all as specified and directed.
Supply & fixing tube light fitting with surface and wall mounted decorative ultra slim round profile LED lighting fixture, 20 watt LED with entruded polycarbonate, environment friendly, energy efficient ready to use with polycarbonate diffuser & integrated electronic driver complete all as specified and directed.
Supply & fixing sheet metal enclosure MCB distribution board single pole & neutral 240 volts 8 way with IP-43 IK-09 protection double door complete with appropriate size bus bar and neutral link, fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed.
Supply and fixing BLDC ceiling fans, 5 star rated by Bureau of energy with service value of not less than 8.40, (26W±10%) with or without remote, with rated speed 350 Rev per min, air delivery 220 Cum/min complete with blades, down rods, electronic regulator and accessories, 230 volt, 1200 mm sweep, suitable for single phase supply complete all as specified and directed.
Supply & fixing PVC flat twin core of size 10 Sqmm complete all as specified and directed.
Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out in soft / loose soil complete all as specified and directed.
Excavation in trenches not exc. 1.5m wide and not exc. 1.5m in depth for foundation etc or for shafts, walls, cesspits, manholes pier holes etc not exc. 10sqm on plan and not exc. 1.5m in depth and getting out in soft/loose soil complete all as specified and directed.
Returning filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm thick in soil complete all as specified and directed.
Removing excavated soil/material to a distance n.exc 50m and depositing where directed at a level not exc 1.5m above starting point complete all as specified and directed.
M&L for PCC (1:4:8) type D-2, using 40mm graded stone aggregate in foundation, filing and mass concrete complete all as specified and directed.
M&L for reinforced cement concrete (1:2:4) type B-1 (using 20 mm graded crushed stone aggregate) nominal mix as in beams, cantilevers, bressumers, lintels over 1.5 m span complete all as specified.
Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams etc. for rough finished surface of concrete complete all as specified and directed.
M&L for MS TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
M&L for TMT MS bars of 5mm dia and upto 10mm dia as in stirrups and spacers cut to lengh bent to shape reqd incl cranking bending spirally for hooking for column and binding with MS annealed wire not less than 0.9mm dia complete all as specified and directed.
M&L for 75 mm thick Cement concrete type D-2, (1:4:8) using 40 mm graded stone aggregate as in sub base complete all as specified and directed.
M&L for 25mm thick PCC (1:2:4) type B-0 using 12.5mm graded stone aggregate ) as in floor finishes and leveling course complete all as specified and directed.
M&L for Non skid coloured ceramic tiles 7 to 8 mm thick exceeding 0.11 sqm but not exceeding 0.18 sqm (Square / rectangular) in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match laid over and including 15mm thick screed bed in cement mortar (1:6) complete all as specified and as directed.
M&L for non skid ceramic joint free coloured tiles 7 to 8mm thick (square / rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar (1:4) complete all as specified and directed by Engineer-in-charge.
All as per item No 57.00 (here-in-before) abvoe but as in skirting over 10mm thick backing coat in CM (1:3) complete all as specified and directed.
M&L Coloured Glazed ceramic tiles in vertical surface 450x300x7 mm with highlighter thick set and jointed in neat cement slurry and pointed in white or colour cement to match incl 10mm thick plaster in cement mortar (1:3) complete all as specified and directed.
S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of red colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws as specified complete all as specified and directed.
M & L for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and directed by Engineer-in-charge.
S&F 605X605 mm size of grid GI frame work for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre / intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length ) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the internediate channel with connecting clips across the intermediate channel at 457mm centre to centre including providing and fixing 4mm thick everest designer ceiling board at size 600x600mm non combuttible material as per AS-1530 Part-3 of IS-14802 with fixing arrangment.
S&F steel work in tubular trusses including columns, special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS.1161-1998 grade St-240 complete all as specified and directed.
M&L for Brick work with sub class ‘B’ old size burnt bricks, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and directed by Engineer-in-charge.
M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement complete all as specified and directed.
M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM in (1:4) finished fair and even external surface complete all as specified and directed.
M&L for preparation of new plastered surfaces and applying two coats of oil bound distemper over a one coat of primer on walls complete all as specified and directed.
M&L for preparartion of new plastered surfaces of walls and applying two coats cement base paint on walls complete all as specified and as directed.
S&F factory made solid PVC door frame of size 50mm x 47mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube complete all as specified & shown in relevant drawing of item No. 08095 in MES Schedule (Part-II) and directed by Engineer-in-Charge.
S&F Factory Made Solid PVC Moulded Door Shutters 28 to 30 mm thick (stile:), with particle board core and 2,4 or 6 raised panel design with 5mm thick Moulded PVC Sheet on the front Face & 5mm Plain colour PVC sheet on back face, fixing in frame at site complete specification & drawing as per SSR complete all as specified and directed.
S&F 125x60mm pressed steel frames for doors with one or more rebates including necessary lugs, hinges lock, strike plate etc complete all as specified and as directed.
S&F 35 mm thick factory made plain framed, panelled shutter (any number of panels) with lock rail and panel of 9mm thick BWP commercial ply or 12 mm thick veneered particle board with commercial veneering on both faces. The size of rail and styles as per IS : 1003 (Part-I), kiln seasoned and chemically pressure treated using second class Hard Wood (Hollock or Bonsum) complete all as specified and directed by Engineer-in-charge.
S&F 100mm size mild steel butt hinges cold rolled medium weight (ISI marked) complete all as specified & directed by Engineer-in-Charge.
S&F 35mm thick factory made glazed and skeleton shutters made of second class hard wood (Bonsum/Hollock), open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc., sizes of members of shutters as specified in SSR Part I Section 8 Clause 8.24 (a) kiln seasoned and chemically pressure treated fixed to chowkat complete all as specified and directed by Engineer-in-charge.
S&F CP Jet spray butter fly design fixed on EWC with stanless screw as approve complete all as specified and directed.
S&F 250mm long aluminium alloy anodised sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy (ISI marked) complete all as specified & directed by Engineer-in-Charge.
S&F 150 mm long aluminium anodized barrel tower bolts of extruded section (ISI marked) complete all as specified and directed by Engineer-in-charge.
S&F 100mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.
S&F Aluminium handle cast type anodized 150 mm long complete all as specified and directed by Eng-in-charge.
M&L for Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.
S&F factory made steel windows or ventilators box type, using ERW hollow 'P' sectin, comprising double frame for and including gauged and glazed skeleton shutter, jointed internally with flat iron (40x4mm) including grill, guard bars of 8mm squre bars fixed horizontally at 100 centre to centre including mild steel hinges, handles, tower bolts, lungs etc complete all as specified and as directed.
S&F 3mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.5 sqm in each pane including painting / oiling to new putty to match with the existing/new surfaces, complete all as specified and as directed.
M&L for preparation of new wooden or wood based surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engineer-in-Charge.
M&L for preparation of new steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engineer-in-charge.
M&L for preparation of steel surface already treated with primer over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.
M&L for cement concrete type C-1, (1:3:6) using 20mm graded aggregate as in bed block or filling of chowkhats including necessary form work complete all as specified and directed.
M&L hard core of guage not exc. 63mm deposited spread and levelled in layers not exc. 15 cm thick, watered and rammed to a true surface using broken bricks complete all as specified and directed.
M&L for 50 mm thick PCC (1:3:6) type C-2 using 40 mm graded crushed stone aggregate as in plinth protection, finished fair and even complete all as specified and directed by Engineer-in-charge. Note :- Plinth protection shall be laid to slope (1 in 30) in bays not exceeding 3 metre in length and joints of 6 mm wide and 10 mm deep shall be provided along the wall and bays and same shall be filled with sealing compound grade B. Cost of ceiling compund is included in the unit rate of this item.
M&L Moorum/red bajri filling in floors or pavings, laid in layers not exc 15 cm thick spread, levelled and rammed including watering complete all as specified.
S&F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed by Engineer-in-Charge.
S&F stainless steel grating 125mm bore size fixed with white cement complete all as specified and as directed.
S&F 15mm bore stop valve, cast copper alloy, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed by Engineer-in-charge.
S&F 15mm dia stop cock cast copper alloy, fancy type with, chromium plated long shank and cup (concealed type) with crutch or butterfly handle screwed down high pressure, screwed both ends for iron pipe complete all as specified & directed by Engineer-in-charge.
S&F vitreous China wash hand basin, white, flat back size 550 x 400mm including 15mm dia, 450 mm long HDPE PVC connection, 750 mm long 32mm bore HDPE waste down pipe including CI brackets all s directed.
S&F pillar taps (fancy type), of 15 mm dia, cast copper alloy, with capstan heads, with chromium plated, screwed down high pressure with or without lettered 'hot' or cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed.
S&F CP Health faucet with stand fixed on wall in CP hose pipe 1.25 mtr length and stainless steel screw as approve complete all as specified and directed.
S&F vitreous china wash down, water closet pan (pedestal pattern), white including fixing bolts and connection to flush pipe and drain out going pipe and closet seat cover black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device, complete all as specified and directed.
S&F PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and as directed.
S&F 110mm bore PVC (SWR) pipes single socketed in any length with solvent joints laid In trenches or in floors complete all as specified and directed by Engineer-in-charge.
S&F 75mm bore PVC (SWR) pipes single socketed in any length with solvent joints laid In trenches or in floors complete all as specified and directed by Engineer-in-charge.
S&F 110mm PVC (SWR) bends any radius with oval access door complete all as specified and as directed.
S&F 110mm PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and as directed.
S&F stack clamps mode out of 50x5mm flat iron including bolts and nuts and securing ends of stays to wall or roof, for 100mm bore pipes, complete all as specified and directed.
S&F stack clamps mode out of 50x5mm flat iron including bolts and nuts and securing ends of stays to wall or roof, for 75mm bore pipes, complete all as specified and directed.
S&F 750 ltr capacity Rotational moulded polythene water storage tank white colour in triple layer (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and as directed.
Cutting into existing manholes for connecting new drains, making good for pipes and cutting out existing benching for and forming branch channels(1/2 round or ¾ section) in cement concrete 1:2:4, type B-1 smooth finished and forming benching as required for 150/200 mm dia SGSW pipe complete all as directed.
S&F 10 litre capacity PVC valveless symphonic action type low level flushing cistern (ISI marked) including 32 mm dia PVC flush pipe connected to water closet with inlet, ball valve, float and handle complete all as specified and directed by Engineer-in-charge.
shyam construction (BID ID -3045907)
M/s Durga Traders (BID ID -3038573)
KAVYA ENTERPRISES (BID ID -3045859)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .