REPAIR TO ROOF, CHAJJA AND FLOORING AT OFFRS MD ACCN UNDER GE(MCTE) MHOW

Amount

Dismantling floor , hearth or wall tiling including cement mortar bedding (but not backing), removing debrish and rubbish off the premises and stacking serviceable tiles .

Taking down chowkats of any description without taking of shutter from the frame exceeding 1.5 sqm but not exc. 4.0 sqm each

Taking down chowkats or frame of any description n.exc. 1.5 Sqm each (without taking off shutters from the frames) & remove off the premises complete all as specified and directed.

S&F in repair Stainless steel curtain rod brackets 25 mm dia including necessary stainless steel clamp complete all as specified & directed.

Dismantling wrought iron or mild steel work of any description etc

S&F in repairs 18 mm thick factory made PVC sheet one side pre-laminated sheet ktichen cabinet shutter. The 18mm thick sheet shutter bent at 90 degree and finish all edges at level for marking edge lipping bending for 0.5 mm thick PVC sheet lipping at all four edges using bonding tape etc complete all as per specified and directed by Engr-in-Charge manufactures specification .

S & F in repairs factory made PVC shelf/partition of required size consisting of panel of 18 mm thick required size consisting of panel of 18 mm thick celuka PVC ply and for supporting the hold of shelf /partition and shall provided 3 edges in size 18mm x 18 mm as per required lenght the front side of the edge visible in the front of the shelf/partition to be edge lipped by 18mm widht x 1 mm thick PVC sheet of density 600 kg/cum manufactured by ISO 9001-2015 Certified Company , using solvent cement etc.

S&F stainless steel shelf closing hinges 75 mm size for PVC door shutters complete all as specified and directed

S&F 50 x 15 mm size magnet door catcher for closing for PVC door shutter complete all as specifid and directed .

S& F 100 mm size MS mat/glossy finish handle complete all as specfied and directed .

S&F, solid PVC wall panelling consisting of 5mm thick wood grain painted PVC sheet fillet of wight 35mm inclusive of solvent cement and fixing at site on PVC frame complete all as specified and directed.

Taking down old curtain rods/ drapery rods of any description and S&F drapery rod 32 mm dia, high Strength aluminium rod with powder coated paint of thickness 40/60 microne of wood finish installations hucks & brackets of galvanised steel, powder coated paint in matching colour with all accessories complete all as specified and directed.

Virified Ceramic tiles 10 mm thick light shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1:6

-ditto- but on vertical surfaces such as skirting incl including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1:6

-ditto- but on vertical surfaces such as skirting incl including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed.

M&L for glazed coloured ceramic tiles, first quality (or approved class, colour and design/shade) of 300x 450x 7 mm thick in vertical surfaces, as in dado/skirting etc set & jointed in neat cement slurry & pointed in coloured cement to match with coloured tiles, over and including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed.

M&L for 300 x 300 x 10mm thick heavy duty ceramic floor tile laid in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match fixed over and including 20mm thick screed bed in CM 1:6 complete all as specified and directed.

Taking up or down 15 mm bore steel tubing and connections, including cleaning for re fixing complete all as specifed and directed

S&F, laying and testing for 15 mm bore GI tubing medium grade galvanised steel tubing including all fittings such as union, reducer, sockets, reducing bends elbows tee, checknuts, caps, plugs etc fixed to wall and ceilling or laid in floors complete all as specifed and directed.

M&L for cutting, chases, pinning in block masonry wall for concealed water tubing and making good to facing and pointing in CM 1:3, cutting n. exc. 10 cm girth all as specified and directed.

Dismantling PVC water tanks 1000 litres capacity.

Dismantling PVC water tanks 500 litres capacity.

S&F rotational moulded polyethylene water storage tanks of capacity 1000 litres (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I.

S&F rotational moulded polyethylene water storage tanks of capacity 500 litres (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I.

Taking down cement or cement lime plaster of any description including racking out joints, hacking for keys , scrubbing down with water etc, complete all as specified and directed.

M&L for Rendering 15 mm thick on fair faces of concrete/brick interior surfaces in cement mortar 1:6 as per manufacturer's instruction, finished fair and even without using extra cement complete all as specified and directed.

M&L preparation of new surfaces pf plastered of walls and applying Two coat of distemper oil emulsion incl priming the surface and incl one coat of wall putty all as directed by Engr-in-Charge .

M&L for Rendering 10mm thick on fair faces of concrete surface of ceiling,chajja in CM 1:3, surface finished even and surface without using extra cement complete all as specified and as directed.

M&L for Preparation of Newly plastered surface and applying three coats of white wash on Ceiling complete all as specified and as directed.

M&L for Rendering 15 mm thick on fair faces of concrete/brick exterior surfaces in cement mortar 1:4 mixed with water proofing compound as per manufacturer's instruction, finished fair and even without using extra cement complete all as specified and directed.

M&L for preparing of newly plastered surface on exterior wall and applying two coats of cement paint over one coat of priming the surfaces all as specified and directed by Engr-in-Carge.

S&F in repair PVC (SWR) pipe 110 mm bore, single socketed , in any length with rubber ring joints and jointed with approved adhesive fixed to wall with iron cleants etc complete all as specified and directed.

S&F in repair PVC (SWR) pipe 180 mm bore, single socketed , in any length with rubber ring joints and jointed with approved adhesive fixed to wall with iron cleants etc complete all as specified and directed.

S&F in repairs PVC (SWR) Bends (any radius ), diminishing pieces or tapers, bore of pipe 110mm, complete all as spcified.

S&F in repairs PVC (SWR) Bends (any radius ), diminishing pieces or tapers, bore of pipe 180mm, complete all as spcified.

Demolition of cement concrete unreinforced in Ground floor & paving n.exc 15cm thickness and removal of debris from site all as specified and directed

M&L for PCC 75 mm thick type B2 (1:2:4) using 40 mm graded stone aggregate) in plinth protection, joints should be filled with bitumen primer etc, complete all as specified and as directed.

M&L Cement concreat type B-0 (1:2:4) using 12.5mm graded stone aggregate 25 mm thickfinished surface rough to receive tiliing all as specified and directed.

Demolition of brick work built in cement mortar in any position and removing rubbish off the premises within 50m all as directed by the Engineer-in-charge.

M&L plan,modular size kiln well burnt sub-class 'B' bricks, exc 6m in mean radius, built in CM (1:4), complete all as specified and directed.

M&L for brick work with modular size kiln well burnt sub-class 'B' bricks, straight or curved on plan to any radius in half brick thick wall built in CM 1:4

S&F rolled sections as in posts, main and cross beam, hip and jack rafters,purlins,where connected to common rafters (beam,tee,angle ,channel pipes , tubes, plates and flat sections etc)including distances pieces ,cleats etc cutting half brick thick wall and fixing with cement mortar complete all as speified and directed of grade FE-410,(gde-E-250) quality all as specified and directed.

M&L for preparation of new steel surfaces of any description ,over 10 cm width or girth and applying two coats of synthetic enamelled paint over a coat of red oxide primer complete all as specified and directed.

Dismantling Plain or Corrugated steel sheeting any gauge,thickness ,including Nainital or similar pattern Roof covering .

S&F for Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

M&L for PCC 75mm thick 1:4:8 type B2 using 40mm graded stone aggregate as insub base finishing the surface rough to receive tilies.

M&L for pre polished coloured cement concrete chequred tile of approved quality size 300X300X 25mm thick on floors over and including 20 mm thick screed bed CM 1:6 set and jointed in neat cement slurry and pointed with colour to match th tiles complete all as specified and directed.

M&L for machine pressed precast concrete interlocing paver block any shape and size conforming to IS-15658-2006 of 60mm thickness, M-40 grade laid dry in floor/path with and including 50mm thick (Compacted thickness) crushed stone sand cushioning complete all as specified.

Taking down existing waterproofing treatment of tar felt of any description from roof surfaces and removing rubbilsh to a distance not exc 100mtres complete all as specified and directed

Disconnecting existing tanks, setting aside for carrying water proofing treatment, reconnecting & refixing in position capacity exc 500 ltrs but not exc 1000 litres as directed by Engineer-in-Charge.

M&L for 10 mm thick screed bed on concrete surfaces in CM(1:3) finished even and smooth without using extra cement complete.

M&L for PCC 25 mm thick (1:2:4) type Bo using 12 mm graded stone aggregates mixed with integral waterproofing chemical PIDI PROOF-LW mixed in proportion of 200ML/50Kg cemet of DR fixit of pidilite industries Ltd or STP No.1 (Liquid)of STP Ltd in proportion 200ML/50Kg cement as in padding on roof surfaces for correcting /making proper slope on roof/chhaja and roof kerbs/benching complete all as specified and directed.

M&L for water proofing treatment on non approachable/non accessible roof surfaces (Horizontal /vertical)in following sequences through manufacturer /authorised applicator of the manufacturer complete all as specified and directed complete.(a) Properly cleaning and drying cemrnt surfaces . (b) Applying one coat of oxidized bitumen based solvent primer @ 0.3Kg/sqm. (c ) Laying 3mm thick APP modified water proofing membrane with 100mm over laps sealed & bonded to the surface by torchon method. (d) Applying two coats of bituminous aluminium paint @ 200 gram/sqm(minimum).(Note:-Make/brandk of APP membrane mmodified with all associated items shall be of any one of SUPER THERMOLAY OF STP LTD OR TORH SHIELD P-3160 OR PIDILITE INDUSTRIES LTD OR HYPER PLAS PLOLYSTER or equivalent approved make

Demolition of reinforced cement concrete (reincorcement cut as required to facilitate demolition) of any description and in any position not otherwise specified complete all as directed.