CERTAIN BR EM REPAIR AND MAINTENANCE FOR POCKET E F AND CENTRAL ASSETS UNDER GE (NORTH) AKHNOOR

Amount

Demolition of brick or stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlars facings, dressed stone work, complete all as specified and directed.

Brickwork with sub class ‘B’ (old size) bricks, straight or curved on plan exceeding 6 metre mean radius built in cement sand mortar 1:6 complete all as specified and as directed.

-Ditto- all as per Srl item No. 02 here-in-before, but except bricks.

Brick work with sub class B brick straight or curved on plan to any radius in half brick thick built in CM 1:4 complete all as specified and directed.

Taking down cement plaster of any description including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed by Engineer-in-Charge.

Rendering 10mm thick cement plaster with cement mortar (1:6) on fair faces of brickwork or concrete surfaces & finishing the surface even and smooth without using extra cement, complete all as specified and directed.

Rendering 15mm thick in cement mortar (1:4) on fair faces of the brick work or cement concrete surfaces, finishing the surface even and smooth without using extra cement, complete all as specified

Rendering 5mm thick cement plaster with cement mortar(1:3) on concrete surface as in ceiling finished even and smooth without using extra cement, complete all as specified.

Preparation of newly plastered surfaces of walls and applying three coats of white wash complete all as specified and directed.

Preparation of newly plastered surfaces of ceiling and applying three coats of white wash, complete all as specified.

Preparation of newly plastered surfaces of wall and applying two coats of cement base paint, complete all as specified and directed.

Preparation of newly plastered surfaces of walls and applying chalk whitening and applying two coats of Oil bound distemper over a coat of primer complete all as specified and as directed.

Preparation of old painted surfaces by washing, rubbing down and stopping of distempered or painted walls and applying one coat of oil bound distemper, complete all as specified and as directed.

Preparation of old painted surfaces by washing, rubbing down and stopping of distempered or painted walls and applying one coat of cement base paint white or tined, complete all as specified and as directed.

Demolition of cement concrete (un-reinforced) in ground floors and paving not exceeding 15 cm thickness (below or above ground level ) complete all as specified and as directed.

40mm thick PCC 1:2:4 type B-1, (Using 20 mm graded crushed stone aggregate) as in flooring including finishing the top surface even and smooth using extra cement complete all as specified directed.

50mm thick PCC (1:3:6) type C-2 (Using 40mm graded stone aggregate) as in plinth protection laid in bays n.exc 2.00 Sqm complete including finishing the surface of concrete topping even & fair without using extra cement complete all as specified directed.

75mm thick PCC (1:3:6) type C-1 (Using 40mm graded crushed stone aggregate) as in PCC path complete including finishing the surface of concrete topping even & fair complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing rubbish off the premises complete all as specified and directed.

25 mm thick PCC 1:2:4 type B-0, (using 12.5mm graded crushed stone aggregate) including finishing surface of concrete topping even and rough as in levelling cousre as specified and as directed.

Non-skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) in floors etc area of each tiles exceeding 0.11 Sqm but not exc 0.18 Sqm. Set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over & including 15 mm thick screed bed in cement and sand mortar 1:6, complete all as specified and as directed.

-Ditto all as per item No 21 but in skirting over and including 10 mm thick rendering in CM 1:4

Glazed ceramic coloured tiles (350x250mm)/(450x350mm) x 7mm thick, as in vertical surfaces such as in skirting and dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 10mm thick back coat layer plaster in cement mortar 1:4, complete all as specified and directed.

Vitrified ceramic tiles (Light shade) 10mm thick (square /rectangular) polished, area of each tile n.exceeding 0.36 sqm laid as in floors, set and jointed in neat cement slurry and pointed in white/coloured cement to match with shade of tiles including 15mm thick screed bed/base in cement and sand mortar 1:6, complete all as specified.

- Ditto all as per item No 24 But in skiriting over and including 10 mm thickk reddering in CM 1:4

Demolition of Stone slabs and tiles of any description or thickness laid bedded and pointed in any mortar in floors, aprons etc.

20-25 mm thick machine cut kota stone slab as in flooring, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over and including 20mm thick screed bed in cement and sand mortar 1:6 complete all as specified and as directed by Engineer-in-Charge. (Size of Kota Stone slab shall be 52 cm x 52 cm).

-Ditto all as per item No 27 here-in-before but in skirting /dado incl 10mm thick CM 1:4 complete.

20 mm thick makrana white marble as in border/cooking platform etc, bedded and jointed in cement mortar 1:6 of 20mm thick including pointing in white cement 1:2 using marble dust including cutting and polishing complete all as specified and as directed.

Dismantling of AC corrugated or semi-corrugated in roof covering including ridges, hips, valleys and flashings etc complete all as specified and as directed.

Dismantling timber scantlings (framed work) 40 Sqcm and over in section, in any position complete all as specified and as directed.

Structural steel work as in roof trusses (framed), trussed purlins, crane gantries, rails and fastening and heavy brackets (Beam, tee, angle, channel or hollow steel section) including distance pieces, cleats etc confirming to Fe-410-W (Gde-E-250) quality B complete all as specified.

Pre-painted galvalume aluminum zinc coating GI based plain sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified.

Pre-painted galvalume aluminum zinc coating GI based plain sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified.

Dismantling of wall and ceiling boards (fibre, pulp, insulation etc) of any type and any thickness including cover fillets/GI grid framework complete all as specified and directed.

4mm thick prelaminated designer ceiling board over & including GI snap grid frame work (Grid size 600x600mm) with powder coated GI angle of size 25x25x3mm fixed along wall perimeter, main runner 'T' of size 25x40x3mm , secondary runner 'T' of size 25x30x3mm suspended with 3mm GI wire @ 1200mm c/c of ceiling by fasteners of adjustable guide hanger including clips/MS fitments to hold the panels, complete all as specified and as directed.

Vitreous china squatting pan "Orissa Pattern" size 580 x 440 mm white with integral foot rest (excluding flushing cistern and flush pipe) with CI'P' trap of long arm of suitable size icluding connection to flush pipe anti symphonic pipes etc, complete all as specified and directed.

Vitreous china wash down water closet pan (pedestal pattern), white (excluding flushing cistern and pipe) complete all as specified and directed.

PVC low level flushing cistern, valveless, syphonic action type, 10 litres capacity with inlet, ball valve float and handle with and including brackets & PVC bend pipe 90 cm etc complete all as specified and as directed.

Vitreous china Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe), with grating and union for discharge pipe all as specified directed.

Vitreous china wash basin, white, flat back, size 550x400mm including waste fitting chromium plated brass, chromium plated steel chain and rubber plug, porcelain stopper, a pair of CI brackets, waste pipe etc complete all as specified and as directed.

PVC connection 15 mm size, of length 450 mm, with PTMT nuts complete all as specified and as directed.

Taking up or down steel tubing and connections, 15 mm bore fixed on walls, floors or ceiling etc complete all as specified and as directed.

-Ditto-all as per above item here-in-before but 20 mm bore.

15mm bore tubes, medium grade, galvanised with and including all fittings fixed to walls, floors, or ceiling or laid in floors etc complete all as specified and as directed.

-Ditto-all as per item here-in-before but 20 mm bore.

16mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

20mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

Refixing old steel tubing and connections in new or old position on walls, ceiling or floors etc of size 15 mm bore after cleaning including provn of new fittings all as directed.

-Detto- all as per item No.55 above but 20 mm bore.

Stop valves/angle valve, cast copper alloy, fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions, for bore dia of pipe 15 mm fixed in repairs, complete all as specified and as directed.

Bib taps15mm, fancy type chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule, for bore dia of pipe 15mm fixed in repairs, complete all as specified and as directed.

Pillar taps 15mm cast copper alloy, fancy type with capstan head, CP, screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nut, screwed for iron pipe 15 mm bore.fixed in repairs, complete all as specified and as directed

Health faucet with one mtr long SS flexible tube and wall hook chromium plated screwed down for iron pipe fixed in repairs, complete all as specified and as directed.

Plastic water closet seat cover white closed pattern with flat bottom and cover including chromium plated hinges device fixed in repairs, complete all as specified and as directed by Engineer-in-Charge.

Ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe 20 mm dia (minimum weight 210 gms) fixed in repairs, complete all as specified and as directed.

20mm bore gun metal glove or gate valve with iron wheel head screwed bith end for iron pipe and fixed in repairs, complete all as specified and as directed

Rotational moulded polyethylene 03 layer water storage tanks of 1000 Litres capacity, (cylindrical vertical tanks with closed top) hoisted and fixed in position including making necessary arrangements for fixing inlet, outlet and over flow pipe and provision of wash out pipe etc including taking down existing tank complete all as specified and as directed.

Rotational moulded polyethylene 03 layer water storage tanks of 500 Litres capacity, (cylindrical vertical tanks with closed top) hoisted and fixed in position including making necessary arrangements for fixing inlet, outlet and over flow pipe and provision of wash out pipe etc including taking down existing tank complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) of size n. exc 1.5 Sqm each and removing from site complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) of size exc 1.5 Sqm each but not exc 4.0 sqm each and removing from site complete all as specified and as directed.

Taking down shutter of any description, area exceeding 1.0 sqm but not exceeding 2.00 Sqm each comp;lete all as specified and directed.

Taking down and refixing incl resecuring and easing shutters area exceeding 1.00 sqm and n.exc 2.00 Sqm each in the same opening complete all as specified and as directed.

Pressed steel frames of sizes 105 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates complete including one shop coat of priming complete all as specified and directed.

Pressed steel frames of sizes 125 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates complete including one shop coat of priming complete all as specified and directed.

M&L For PCC 1:2:4 type C-0 (Using 12.5 mm graded crushed stone aggregate) as in filling of pressed steel frame complete all as specified and directed.

M&L For PCC 1:3:6 type C-1 (Using 20mm graded crushed stone aggregate) for hold fast blocks, including necessary form work for rough finished surfaces etc complete all as specified and as directed.

35mm thick, IInd class hard wood plain, framed, panelled factory made shutters (two panel) with lock rail and panel of 12mm veneered particle board with commercial veneering on both faces. The size of rails and styles as per IS-1003 (Part-I) kiln seasoned and chemically pressure treated complete all as specified & as directed.

35mm thick, 2nd class soft wood glazed & skelton factory made shutter, open rebated and prepare to receive wire mesh etc of framing plain, chamfered or rounded, fitted with cut and mitred beads for sucuring wire mesh etc. Size of members of shutters as specified in SSR PART I Section 8 clause 8.20(a) all as specified directed.

Solid PVC Door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S square tube, supplying and fixing in opening as per specification and drawing,complete all as specified and as directed.

Factory made solid Panel PVC( door/almirah shutter/cupboard) shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete all as shown in drawing of relevant item in MES, schedule Part-II , 2020 as specified and as directed.

Aluminium powder coated sliding window, chowkat of size 63mm x 40 mm x 1.3 mm thick with aluminium powder coated two track frame of size 63 mmx 32mmx 1.3 mm thick with 2 Nos sliding shutter of powder coated aluminium section (top rail,bottom rail and style of size 40mmx 18mm x 1.3 mm thickscrewed to wall/floor including provn of 4mm thick tinted sheet glass fitted in panel including necessary locking device , joining cleats, glazing clips, rubber neoprene packing, aluminium beading and screwed including fixing of stainless steel wire cloth 0.36mm nominal dia of wire and width of aperture 1.4 mm to aluminium frame with and including aluminium grill fitted with aluminium flat of size 40mm x 3mm complete all as specified and as directed.

Aluminium powder coated sliding window, chowkat of size 92mm x 40 mm x 1.3 mm thick with aluminium powder coated three track frame of size 92 mmx 32mmx 1.3 mm thick with 2 Nos sliding shutter of powder coated aluminium section (top rail,bottom rail and style of size 40mmx 18mm x 1.3 mm thick screwed to wall/floor including provn of 4mm thick tinted sheet glass fitted in panel including necessary locking device , joining cleats, glazing clips, rubber neoprene packing, aluminium beading and screwed including fixing of stainless steel wire cloth 0.36mm nominal dia of wire and width of aperture 1.4 mm to aluminium frame with and including aluminium grill fitted with aluminium flat of size 40mm x 3mm complete all as specified and as directed.

Powder coated aluminium door/ partition sections with standard aluminium sections for frame work, for glazed shutters, partitions, ventilators with one or more rebates including joiining cleats, aluminium beadings etc for fixing etc. complete all as specified.

Powder coating Anodised aluminium window and ventilator shutters, side hung type without sash bars aluminium sections weighing 0.55 kg/m (glass & wire mess shall be measured and paid separetely) including necessary joining cleats, glazing rubber packing, anodised aluminium clips, snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 Nos.) suitable handle (1 N.) and 100 mm long aluminium tower bolt (02Nos) per shutters complete all as specified

Butt hinges, 100 mm long medium weight, cold rolled mild steel, ISI marked complete all as specified and as directed.

250mm long aluminium alloy anodised sliding door bolt with hasp staple, bolt type, and fixing clips of sheet, cast or extruded sections & fixing bolts and sliding bolts of extruded section or cast aluminium alloy, ISI marked complete all as specified and as directed.

150 mm long, aluminium anodised, barrel tower bolts, of extruded section ISI marked complete all as specified and as directed.

Aluminium handles cast type anodised of size 150mm long ISI marked complete all as specified and as directed.

Door closer of aluminium (Die cast body), hydraulically regulated, designation No 3, universal type, suitable for door shutters of size 851mm to 1000mm of width , ISI marked fixed in repairs, complete all as specified and as directed .

Aluminium mortic lock (4 levers) 100 mm long vertical type fixed in repairs, complete all as specified and as directed.

300 mm size mild steel ordinary rat tail rod pattern springs including roller and roller plate, ISI marked, fixed in repairs complete all as specified and as directed.

25 mm dia stainless steel curtain rod complete with stainless bracket and side caps fixed in position by drilling holes in wall and fixed the bracket with rawl plug and SS screw fixed in repairs, complete all as specified and as directed.

Steel windows/ventilator (Box type) factory made with double shutter with or without devetailed bar ( glass & glazed shutter) of size 79mmx39mm,16 gauge rectangular tubular frame with side hung shutter with glazing bars 12x3mm flat iron incl box type hinges with steel handle and steel peg stay dovetailed or welded incl 2 Nos tower bolts in each shutter 100mm long with & including 8mm square bar grills, complete all as specified & as shown on drg No. CEUZ/TD/1302/2008 Sh no 1/1 to 1/3 .

Description all as per Item No 86 above, but only fixed glass pane shutter without glazing bars.

Hacking out old broken glass (any thickness, size, quality or description) from metal frames/Aluminium frames including punching or drilling out old glazing pins/spring clips and providing and fixing new ones glazed with oil putty fixing with oil putty fixed beads complete all as specified and as directed.

S&F 3mm thick sheet glass, ordinary quality and glazing with oil putty wooden beads in square not exceeding 0.5 Square metre in each pane complete all as specified and as directed.

3 mm thick sheet glass figured (frosted), ordinary quality and glazing with oil putty/wooden beads in square not exceeding 0.5 square metre in each pane complete all as specified and as directed.

Galvanized mild steel wire-cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed

Galvanized mild steel wire-cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples fixed in repairs, complete all as specified and directed.

Preparation of new steel surfaces of any description exc 10cm width or girth priming with red oxide primer and painting with two coatss of synthetic enamel paint complete all as specified and directed.

Painting to new wood or wood based surfaces of any description not otherwise described over 10 cm in width or girth including preparation of surfaces, priming with pink primer (one coat) finished with two coats of synthetic enamel paint complete all as specified and directed.

Preparation of old steel surfaces of any description, over 10 Cm in width or girth, not otherwise described and applying one coats of synthetic enamel paint complete all as specified and directed.

Preparation of old wooden surfaces exceeding 10 cms width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Taking down eaves gutters and rain water pipe , soil and waste pipe (any size or pattern), including all fittings, heads , shoes bends , swan-necks etc complete all as specified and directed.

110mm bore PVC SWR Type-B pipes single socket in any length with rubber joints fixed in floors etc complete all as specified and directed.

110mm bore PVC SWR Type-B pipes single socket in any length with rubber joint fixed to wall with PVC//MS holder clamp etc complete all as specified and as directed.

75mm bore PVC SWR Type-B pipes single socket in any length with rubber joints fixed in floors etc all as specified and directed.

75mm bore PVC SWR Type-B pipes single socket in any length with rubber joint fixed to wall with PVC//MS holder clamp etc complete all as specified and directed.

PVC SWR reducer 110mm to 75 mm complete all as specified and directed.

PVC SWR Type-B cowls 75mm bore all as complete all as specified and directed.

110mm bore PVC Bends (any radius) diminishing pieces or tapers (larger bore measured) for pvc pipes complete all as specified and directed.

75mm PVC (SWR) junction single, (single T) equal or unequal provided with access door, complete all as specified and directed.

75mm PVC (SWR) bends any radius provided with access door, complete all as specified and as directed.

PVC (SWR) floor traps 75mm plain with grating including joints with solvents cement fixed in repairs complete all as specified and directed.

75mm PVC (SWR) junction single, (single T) equal or unequal provided with access door, complete all as specified and directed.

Taking down and refixing in position of aluminium door shutters of any size and description and making functional by way of repair/ replacement of floor spring, hydraulic door closer, hinges, lock, rubber packing etc as required complete all as specified and as directed.

Sunken Floor treatment :- Providing and laying of water proofing treatment to sunken portion by applying cement slurry mixed with acralic based polymer modified cementitious composite compound of make as approved including demolition and filling of sunken floor by PCC 1:5:10 (Using aggregate). (a) First layer of slurry of cement @ 0.488 Kg/Sqm mixed with acrylic based polymer modified cementitious composite compound @0.253 Kg/Sqm. This layer allowed to air cure for 4 Hours. (b) Second layer of slurry of cement Q 0.242 Kg/Sqm mixed with acrylic based polymer modified cementitious composite compound @ 0.125 Kg/ Sqm his layer allowed to air cure for 4 Hours. Note :- 1. Concrete for sunken slabs shall be mixed with WP compounds as manufacturdrs instructions before carrying out water proofing treatment the sunken slab slab shall be tested with water for 48 hrs for any leakage/dampeness is seen in ceiling below, then treatment is again carried out to RCC slab and it is again tested ( Water proof compound rate is superatly. 2. 50mm thick PCC at the bottom of slab and slope shall be 1:20 toward the corner of outer wall and GI pipe of 50mm dia (Med grade) be inserted at corner projecting outside 20 cm . 3. 15 mm plaster mised with WP Compound shall be provided while concrete is green 4. Only floor area shall be measured for payment purpose.

Taking down carefully copper/aluminium point wiring (light,fan,bell, socket or power) complete,including fixtures and fittings such as switches, ceiling roses, holders,regulators, sockets, tube light fittings and including making good the disturbed surfaces to match with existing surface and colour shade with putty and white cement at necessary holes for smooth finishing complete all as specified and directed complete all as specified and directed.

Material and labour for point wiring complete with 1.5 sqmm PVC insulated, FRLS type, ISI marked,conforming to IS-694/1990 unsheathed, multistranded, single core, copper conductor cable 1100 volts grade colour code cables drawn through and including PVC Conduit 20 mm dia medium grade and including cutting, chasing work at any height and all accessories are concealed in walls / roofs / floors / ceiling etc. metal flush box with top,bottom,side/back wall knockout for conduit entry from any direction made out of 1.22 mm thick suitable for fixing of modular top cover plate as per numbers of switch modules for modular switches,sockets,fan regulators,red colour indicator, blank plates etc as approved coloures and including 1.5 Sqmm PVC insulated multistranded FRLS type unsheathed(Green colour),single core cable with copper conductor cable as earth continuity conductor and connecting to common earth dolly and including making good the disturbed surfaces to match with existing surface and colour coat including providing putty and white cement for smooth finishing of existing surface complete all as specified and directed for the following:- Note:- All necessary accessories such as modular box,top cover plate, blank plate, MS box,screws, wasjers amd all mosular electrical fixtures are to be used as same take/mrand only and shall be deemed.

One light point controlled by one switch.

One 3 pin 5 amps socket point controlled by one 5 amps switch on independent board .

One 3 pin 5 amps socket point controlled by one 5 amps switch on same board .

All as per item No.2 (b) above, but point wiring with 2.5 sqmm and earth conductor of size 2.5 sqmm complete all as specified and directed for the following:-

One 6 pin 16/6 amps socket outlet point controlled by one 5 amps switch on same board.

Supply and fixing modular type switch 6 to 10 Amps, single pole 1 way, 1 module, 240 V, ISI marked complete all as specified an directed.

Supply and fixing modular type switch 16 Amps, single pole 1 way, 1/2 module, 240 V, ISI marked complete all as specified an directed.

Supply & fixing modular type socket shuttered type 6 Amps- 2/3 Pin combined 2 module,240V,AC ISI Marked as approved by GE complete all as specified and directed.

Supply & fixing modular type socket shuttered type 6 Amps- 2/3 Pin combined 2 module,240V,AC ISI Marked as approved by GE complete all as specified and directed. complete all as specified and directed.

Supply & fixing angle lamp holder, insulated body with back plate for bulb complete all as specified and directed.

Ceiling rose, 3 terminal ,PVC/polycarbonate body ISI marked, complete all as specified and directed.

Supply & fixing LED Battens surface mounting General purpose in Extruded Aluminium Aluminium housing with wattage of 20 watt 4 feet light fitting as approved by GE incld removing old unserviceable fitting complete all as specified and directed.

Supply & fixing LED Battens surface mounting General purpose in Extruded Aluminium Aluminium housing with wattage of 10 watt 2 feet light fitting as approved by GE incld removing old unserviceable fitting complete all as specified and directed.

LED INVERTER batten 20 W 4 feet with square profile and poly carbonate channel lithium ion battery with charging time 8 to 10 hours and backup time upto 4 hours as approved by GE including removing old fitting all as complete all as specified and directed.

LED bulb 12 watts, 240Volts,50Hz pin type as approved by GE and including removing old unserviceable item complete all as specified and directed.

LED secruity light fitting of capacity 25 Watt LED street light fitting in aluminium PDC housing, toughened glass cover as approved by GE including Gi bracket fixed with clamps and all connected accessoris with IP66 protection with suitable inbuilt surge protector and cable connection from ceiling rose to light fitting and testing and including removing of old unserviceable item complete all as specified and directed.

Supply & fixing sheet metal enclosure acrylic door 240 volts AC,SPN double door distribution board 8 way and neutral (conforming to IS 8623 as amended) painted with epoxy based power coated painting suitable copper busbar,neutral bar,earth bar fully insulate and cable ties for pre-wire,door earthing, Corner shield for better protection, pan assembly for ease fo installation and complete connecting cable links with top and bottom removable gland plate reversable doors for IP 43 DBs protection and including making good the disturbed surfaces to match with existing surface and colour shade all as specified and as directed.

MCB SP 6 to 32 Amps 10 KA,"C" series,AC,240Volts,50Hz , ISI marked complete all as specified and directed.

MCB single pole & neutral 40 to 63 amps 10 KA 'C' series AC,240Volts,50Hz , ISI marked complete all as specified and directed.

Earthing complete wih galvanised steel earth plate electrode 60cmx60cmx6 mm thick burried directly in ground(earth pit not less than 2.25 mtr below ground level) with top edge of earth plate not less than 1.5 m below normal ground level connected galvanised earth lead wire 4.0mm dia by means for bolts, nuts, check nuts and washers of galvanised iron of steel all as shown in electrical plate No. connected to earthing test point all as specified or indicated including testing on completion all as specified and directed.

Supply and fix Exhaust fan 300 mm sweep metal body industrail type heavy duty electrical operated AC 50HZ, ISI marked, 900 rpm,IP-55 as approved by GE with complete accessories including luvours and necessary fixing arrangements such as nuts, bolts & washers and connecting PVC sheathed copper conductor cable of size three core, 1.0 sqmm from ceiling rose to exhaust fan conector complete all as specified and directed. Old Unserviceable Exhaust fan shall be deposited to MES store yard.

Sub main wiring complete with 2 run of 6 sqmm single core copper conductor (ISI marked) cable 1100 volts grade,FRLS type, PVC insulated, unsheathed,flexible,multi stranded colour coded cables drawn through and including rigid PVC conduit of size 25 mm dia medium grade(MMS) with all connected accessories such as Bend,Tee,Elbow,Short peices etc concealed in wall/roofs/floors and including one run of 2.5 sqmm single core copper conductor cable flexible, PVC insulated, unsheathed, multistranded, 1100 volts grade,FRLS type as earth continuity conductor connected to common earth dolly and including making good the disturbed surfaces to match with existing surface including cutting and cheasing and complete all as specified and directed. Note : - Two run of 6 sqmm single core copper conductor cable and one run of 2.5 sqmm single core copper conductor cable as earth continuity and one run of PVC conduit shall be measured as one unit.

Ceiling fans complete with blades. Down rods, electronic regulator and accessories, 230 volt, 1200mm sweep, min air delievery 210 CFM with service value 6 .00 BEE five star rated with brushless direct current motor (BLDC) as approved by GE incl taking down existing and deposit with MES all as specified and directed. Note:- Old Unserviceable Ceiling fan shall be deposited to MES store yard.

Vertical double door TPN in replacement are fitted with bus bar neutral link, blanking plates of 4 way (4+12) with suitable for incomming MCCB 4 pole 'G' frame,having isolated neutral bar, mechanical impact strength IK09, door earthing suitable for MCCB upto 125 Amp, complete all as specified and as directed.

MCCB 04 pole 415 volts 16 KA, 63 Amp adjustable thermal & fixed magnetic setting type suitable for TPN vertical loadline DB fixed in replacement, complete all as specified and as directed.

Supply & fixing sheet metal enclosure acrylic door 240 volts AC,SPN double door distribution board 12 way and neutral (conforming to IS 8623 as amended) painted with epoxy based power coated painting suitable copper busbar,neutral bar,earth bar fully insulate and cable ties for pre-wire,door earthing, Corner shield for better protection, pan assembly for ease fo installation and complete connecting cable links with top and bottom removable gland plate reversable doors for IP 43 DBs protection and including making good the disturbed surfaces to match with existing surface and colour shade all as specified and as directed.

Fan regulator modular type electronic step type 100 Watts, 2 module 240Volts, AC ISI marked complete all as specified and directed.

Calling bell ding dong 230 volts AC single pole

Modular Bell push 6A 1 module, 240V, ISI Marked Complete all as specified and directed.

Socket outlet 3 pin,16 Amp, flush type all as specified and directed.

Socket outlet 3 pin,6 Amp, flush type all as specified and directed.

Switch socket combination 2 in 1, 6A flush type, all as specified and directed.

Switch socket combination 3 in 16A flush type, 5 in 1 all as specified and directed.

S & F LED in replacement of light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core filexiblecopper conductor cable to suitable size.

LAL CONSTRUCTIONS (BID ID -3320023)

PACHNANDA BUILDERS (BID ID -3318712)

M/s Chopra Constructions (BID ID -3319314)

M/S SIKANDER KUMAR SHARMA (BID ID -3327933)

bushan kumar (BID ID -3326245)

M/S KARAN SINGH CONTRACTOR (BID ID -3327968)