Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹12.3 LAccepted-AOC | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹16.2 L+₹3.5 L (28.1%)Rejected-Finance | L2 | Rejected-Finance Not Lowest Bidder | |
| 3 | L3₹16.3 L+₹3.6 L (28.7%)Rejected-Finance | L3 | Rejected-Finance NotLowest Bidder |
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
7 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Hisar
Garrison Engineer Hisar Military Station Hisar 125006
CA No GE(H)-54/2022-23 DAY TO DAY MAINT TO MD ACCN IN BANA SINGH VIHAR UNDER AGE B/R II OF GE HISAR AT HISAR MIL STN
2022_MES_562123_1
CA No GE(H)-54/2022-23
Open Tender
Civil Works
Item Rate
270 days
Hisar Mil Stn
As per Tender documents
6 documents required · 6 mandatory
₹500
GE Hisar
₹40,000
Yes
5 Jan 2023
9 Nov 2022
9 Dec 2022
9 Nov 2022
7 Dec 2022
24 Nov 2022
Amount
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises.
Taking down cement plaster or cement lime plaster on PCC/stone surface/brick surfaces including raking out joints hacking for key scrubbing down with water etc all as directed.
S&F in repairs stainless steel butt hinges of size 100mm medium weight, cold rolled mild steel ISI marked complete all as specified.
S&F in repairs continuous (piano) hinges, mild steel, bright finish or electro galvanized width of flaps 30mm (when open) fixed with CP steel screws.
S&F in repairs 250mm long aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified.
S&F in repairs 150mm long aluminium anodized barrel tower bolts of extruded section (ISI marked) complete all as specified.
S&F in repairs 200mm long aluminium anodized barrel tower bolts of extruded section (ISI marked) complete all as specified.
S&F in repairs 150mm long extruded aluminium alloy handles, cast type, anodised (ISI marked) complete all as specified.
S&F in repairs hasp and staple of size 100mm aluminium anodized safety type with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified.
Supply and fixing in repairs Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified.specified. Note :- Aluminium clip, aluminium Z clip, wooden beading, screws or other necessary material shall be provided by the contractor and cost of same shall deemed to be included in quoted rates.
S&F in repairs anchor bolt 75mm long 10mm dia complete all as specified.
S&F in repairs 20mm bore mild steel powder coated curtain rod with 02 Nos decorative ball type brackets (for each opening) and 02 Nos decorative side stoppers (for each opening) fixed on wall with wooden gutties & screws complete all as specified & as directed.
M&L for 40mm thick PCC 1:2:4 type B1 using 20mm graded crushed stone aggregate as in floor finished with spike rolling to surfaces or making impressions of expanded metal, whilst the concrete is green, all as directed.
M&L for non skid ceramic jointless tiles (coloured) 1st quality, 7 to 8mm thick, area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over & including 15mm thick screed bed in cement & sand mortar 1:6 complete all as specified and as directed.
M&L for non skid ceramic jointless tiles (coloured) 1st quality, 7 to 8mm thick, area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, on vertical surfaces such as dado, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over & including 10mm thick rendering (as screed bed) in cement & sand mortar 1:4 complete all as specified and as directed.
M&L for non skid ceramic jointless tiles (coloured) 1st quality, 7 to 8mm thick, area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over & including 15mm thick screed bed in cement & sand mortar 1:6 complete all as specified and as directed.
M&L for non skid ceramic jointless tiles (coloured) 1st quality, 7 to 8mm thick, area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over & including 15mm thick screed bed in cement & sand mortar 1:6 complete all as specified and as directed.
M&L for glazed ceramic of required designer pattern tiles (coloured) 1st quality, 300mm x 200mm x 7mm thick, on vertical surfaces such as dado, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over & including 10mm thick rendering (as screed bed) in cement & sand mortar 1:4 complete all as specified and as directed.
M&L for 16-18mm thick granite (of any type) work table rubbed and polished) in cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite etc laid over & including 20mm thick screed bed in cement & sand mortar 1:6, complete all as specified & as directed.
M & L for rendering 10mm thick in cement mortar 1:3 on ceiling, finished even and smooth without using extra cement complete all as specified.
M & L for rendering 15mm thick in cement mortar 1:4 on faces of brick work or concrete surfaces of walls, finished even and smooth without using extra cement including mixed with and including liquid water proofing compound @200 ML per 50 KG by weight of cement complete all as specified and directed.
M & L for rendering 15mm thick in cement mortar 1:4 on faces of brick work or concrete surfaces of walls, finished even and smooth without using extra cement including complete all as specified and directed.
M&L for preparation of newly plastered surfaces of ceilings & applying three coats of white wash complete all as specified.
M&L for preparation of new plastered surfaces and applying two coats of oil emulsion distemper (OBD) of approved shade/tint over a coat of primer on walls all as specified & as directed.
S&F 4.5mm thick plain sheet glass in glazing to aluminium door, window & partition including pad/gasket all as specified and directed.
Dismantling old unserviceable PVC water tank capacity 500 ltr and not exc 1000 ltrs & removal from site etc complete all as specified and directed.
Supply and fixing 500 Litre capacity Rotational moulded polyethylene water storage tanks (colour other than black as approved by Engineer-in-charge) triple layered (cylindrical vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. complete as specified in SSR Part-I.
S&F Ball brass valve, high pressure, with polythene float and flynut complete, screwed for iron pipe 20mm bore or brass ferrule and fixed complete all as specified and as directed.
S&F in repairs Ball brass valve, high pressure, with polythene float and flynut complete, screwed for iron pipe 20mm bore or brass ferrule and fixed complete all as specified and as directed.
Taking up or down 15mm bore steel tubing and connection incl cleaning for refixing or removal to store.
Taking up or down 20mm bore steel tubing and connection incl cleaning for refixing or removal to store.
M&L for galvanized steel water tubing medium grade of 15mm bore with & including all fittings and fixed complete to walls and ceilings or laid in floors.
M&L for galvanized steel water tubing medium grade of 20mm bore with & including all fittings and fixed complete to walls and ceilings or laid in floors.
M&L for Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth in brick wall all as specified and directed.
S&F in repairs 15 mm bore bib tap, cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed for iron pipe or for brass ferrule.
S&F in repairs 15mm bore angle cock, cast copper alloy, fancy type, chromium plated, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions.
S&F in repairs 15mm bore, fancy type brass CP Wall Mixer 3-in-1 with 115 mm Long Bend Pipe for connection to Overhead Shower (with Bush & Piston Diverter Fitting) with Aerator complete all as specified and as directed. Make - Cat Part No MQT-517BKN of ESSCO Jaquar or equivalent of makes mentioned in Appx 'C' here-in-after.
S&F in repairs 15mm bore, fancy type brass CP central hole basin mixer with U shape round casted spout with 450mm long braided hoses complete all as specified and as directed. Make - Cat Part No MQT-516AKN of ESSCO Jaquar or equivalent of makes mentioned in Appx 'C' here-in-after.
S&F in repairs PVC connection 300 mm long suitable for 15 mm bore GI pipe including PTMT nuts on both sides complete all as specified.
S&F in repair brass chromium plated shower rose 125mm size with or without swivel joints including shower arm 15mm size 195mm long bend of 45 degree with flange of CP fixing to steel pipe or union complete all as specified and directed.
S&F in repairs Jet Spray with 1 Meter PVC Tube (Stainless Steel) complete all as specified and as directed.
S&F in repairs CP grating 100 mm dia (minimum weight 25 gram) complete all as specified and directed.
S&F in repairs tubular towel rail, brass chromium plated, 20mm dia, ‘D’ type, 60cm long between flanges.
S&F in repairs corner glass shelf 300mm size with bracket complete all as specified and directed.
S&F in repairs Plastic water closet seat, white , closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device.
S & F in repairs brass bottle trap with fully casted body 25mm bore with inlet and outlet, screwed for pipe or connection including packing, union and cap complete all as specified and directed.
S&F in repairs CP 32mm dia waste coupling full threaded complete all as specified and as directed.
S&F in repairs PVC flexible waste pipe 32mm dia and 90cm long including adopter complete all as specified and as directed.
S&F in repairs kitchen faucet areator tap head made from premium quality ABS and SS anti corrosion and anti rust complete all as specified and directed.
S & F in repairs vitreous china wash down water closet pan semi-pedestal pattern (Anglo-Indian Type), white including connection to drain (or outgoing pipe) and to flushing pipe, anti-sypohonage pipe etc. including cast iron 'P' or 'S' trap, lime concrete in sunken floor making connection with flush pipe with new polythyelene flush bend (floor portion) and making good to floors, matching to existing surface complete all as specified & as directed.
S&F in repairs vitreous china wash down water closet (Padestal pattern) White, including plastic water closet seat cover, black, closed pattern with flat bottom with mild steel chromium plated or aluminium hinging device and fixing with all joints including connection to drain or outgoing pipe and to flushing pipe, anti-syphonage pipe etc complete all as specified and as directed.
S&F in repairs PVC valveless symphonic action type low level flushing cistern (ISI marked) of 10 litre capacity including 32 mm dia PVC flush pipe connected to water closet with inlet, ball valve, float and handle complete all as specified.
S&F in repairs PVC syphon with rod including PVC handle with adjustable lever (flushing kit) suitable for 10 litre capacity PVC flushing cistern complete all as specified.
S&F in repairs vitreous china wash hand basin, white, flat back of size 550mm x 400mm with & including a pair of cast iron brackets embedded in PCC 1:3:6 type C1 blocks of size 10x7.5x15cm, 32 mm dia PVC waste pipe and 32mm bore PTMT waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement & other end fixed, (excluding tap, waste chain & plug), complete all as specified.
S&F in repairs 15mm bore fancy type pillar tap, cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks & fly nuts, screwed for iron pipes & fly nuts, screwed for iron pipes.
S&F in repair kitchen sink with drainage board (overall size 915mm x 460mm and bowl size 410mm x 330mm x 160mm or nearest higher size) ) made from high grade AISI-304 (18/8) stainless steel of 1mm thickness including 32mm bore brass CP waste coupling, plug, washer, 32mm bore and 600mm long PVC waste pipe including fixing cantilever brackets made of MS angle iron 30x30x3mm and flat iron 25x3mm both duly painted with two coats of synthetic enamel paint over a coat of red oxide primer, cutting for and pinning of ends of brackets to errecting stand into wall and making good distrubed portion in CM (1:2) on in PCC (1:2:4) using 20mm graded stone aggregate and connecting union to pipe complete all as specified and directed.
S&F in repairs stainless steel kitchen plate rack (overall size 31x24x10 inch) fixed with suitable size of screws etc complete all as specified and directed. Make - Cat Part No P-340 of Prayag or equivalent of makes mentioned in Appx 'C' here-in-after.
Attending of complaints pertaining to essential internal water supply / plumbing services of B/R works for maintenance and upkeep of Md/OTM Accn through day to day maintenance in the AOR of AGE B/R-II {complaint to be collected from concerned JE (Civ) } including necessary minor material required as per note below for rectification of complaint to the entire satisfaction of users and all as directed by Engr -in-Charge :-
Notes :- The rates quoted against this item shall includes the following :- (i) Material required for plumbing fittings / items of any size (like 'T' , elbow, nipple, socket, union, clips, screws, white cement, M-seal etc) and tolls required for attending complaints will be provided to his person for attending the complaint by the contractor all as directed by Engineer-in-charge. (ii) If more than one complaint pertaining to same quarter of Md Accn and same bldg of OTM Accn shall be considered as one complaint. (iii) Contractor shall provide the complaint slip booklet required for throughout the contract period containing 100 pages in duplicate of size 5 inch x 8 inch properly binded and printed with their Firm Name and Tele phone numbers as per sample and directed by Engineer in Charge. (iv) The contractor or the person authorised by him shall attend the complaint cell and collect all the complaints slips on daily basis at 0930 Hrs to carry out complaints and give completion report about the rectification of complaints received in the morning to the concerned JE(Civ) on the same day before 1700 Hrs. Complaint slip shall be got singed by user with name, number and rank and return the same to MES staff by same day.
(v) In case of complaint has not been attended within stipulated time frame necessary penalty at the rate of Rs. 100/- per complaint per day shall be imposed and recovered from the contractor. (vi) S&F in repair / replacement of unserviceable items will be measured and paid separately in relevant plumbing items as mentioned here-in-after on the requirement basis after approval of the concerned JE(Civ) / Engineer-in-charge after deciding nature of complaint received from users. (vii) Complaint slip which requires repair with replacement of major items as considered here-in-after shall not be measured and paid under this item.
Attending of complaints pertaining to essential of joinery / carpentry services of B/R works (like repair of doors, windows, aliminium windows, Cupboard, shelves, fixed type windows, wooden almirah, false ceiling, Ac sheet roof etc) for maintenance and upkeep of Md/OTM Accn through day to day maintenance in the AOR of AGE B/R-II {complaint to be collected from concerned JE (Civ)} including necessary minor material required as per note below for rectification of complaint to the entire satisfaction of users and all as directed by Engr -in-Charge :-
Note :- The rates quoted against this item shall includes the following :- (i) Material required for repairing the joinery / carpentry works / roof sheets (like nails, screws, wooden members, M-seal, J-Hooks, self tapping screw, oil putty, beading, fillets etc) and tolls required for attending complaints will be provided to his workman for attending the complaint by the contractor all as directed by Engineer-in-charge. (ii) If more than one complaint pertaining to same quarter of Md Accn and same bldg of OTM Accn shall be considered as one complaint. (iii) Contractor shall provide the complaint slip booklet required for throughout the contract period containing 100 pages in duplicate of size 5 inch x 8 inch properly binded and printed with their Firm Name and Tele phone numbers as per sample and directed by Engineer in Charge. (iv) The contractor or the person authorised by him shall attend the complaint cell and collect all the complaints slips on daily basis at 0930 Hrs to carry out complaints and give completion report about the rectification of complaints received in the morning to the concerned JE(Civ) on the same day before 1700 Hrs. Complaint slip shall be got singed by user with name, number and rank and return the same to MES staff by same day.
(v) In case of complaint has not been attended within stipulated time frame necessary penalty at the rate of Rs. 100/- per complaint per day shall be imposed and recovered from the contractor. (vi) S&F in repair / replacement of unserviceable items will be measured and paid separately in relevant joinery / carpentry items as mentioned here-in-after on the requirement basis after approval of the concerned JE(Civ) / Engineer-in-charge after deciding nature of complaint received from users. (vii) Complaint slip which requires repair with replacement of major items as considered here-in-after shall not be measured and paid under this item.
Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc. (measured overall as fixed along the centre line over fitting and accessories) complete all as specified.
Supply and fixing 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls with necessary MS/PVC clamps and necessary screwing complete all as specified.
Supply and fixing 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls with necessary MS/PVC clamps and necessary screwing complete all as specified.
S&F 110mm bore PVC (SWR) bend with access door all as specified & as directed.
S&F 75mm bore PVC (SWR) bend with access door all as specified & as directed.
S&F 110mm PVC (SWR) junction single, (Single T) equal or unequal provided with access door complete all as specified and directed.
S&F 75mm PVC (SWR) junction single, (Single T) equal or unequal provided with access door complete all as specified and directed.
S&F 110 mm bore PVC (SWR) vent cowl complete all as specified.
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .