Loading…
Loading…
Tender Value
₹12.5 L
EMD Value
₹24,920
Closing Date
3 Oct 2026, 2:30 pm6d left
Executive Engineer
Irrigation Division 3rd Banda
Construction of Office Buliding for 4th sub division under Irrigation Division 3rd Banda at District Banda Hedquater (LOT-01)
2026_UPIDC_1189277_1
02/EE/2026-27 Date 11-09-2026
Open Tender
Civil Works
Item Wise
60 days
Banda
Please refer Tender documents.
2 documents required · 2 mandatory
₹2,354
₹24,920
26 Sept 2026
26 Sept 2026
3 Oct 2026
26 Sept 2026
3 Oct 2026
26 Sept 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Earth work by Power transported earth with a lead beyond 200m and upto 1.0 km including excavation, loading, unloading, manual compaction, dressing and all lift complete required for prpoer completion of Work. | 247.24 | M3 | - | - |
| 2 | Brick Work 1:4 with cement and coarse sand including all cost of material labour, T&P etc required for prpoer completion of Work. | 39.06 | M3 | - | - |
| 3 | Centering and shutering for R.C.C slab,lintel etc. including all cost of material labour, T&P etc required for prpoer completion of Work. | 56.68 | M2 | - | - |
| 4 | R.C.C. work 1:1.5:3 with cement, coarse sand and stone grit size 4.75-20 mm including all cost of material labour, T&P etc required for prpoer completion of Work. | 4.53 | M3 | - | - |
| 5 | Supplying and laying of steel in R.C.C. work including all cost of material labour, T&P etc required for prpoer completion of Work. | 0.32 | MT | - | - |
| 6 | 2.5 cm thick 1:2:4 plain cement concrete floor with cement approved coarse sand and 2 cm graded approved stone laid in pannels finished with 3 mm floating coat of neat cement and marble dust in ratio 5:1 as specified over and including 8 cm thick base concrete consisting of cement fine sand of 1.25 fineness modulus and brick ballast 4 cm gauge in the portion of 1:4:8 and removing any overlaping mortar at the joints of the pannel if any and giving them a uniform finish including supply of all material,labour,and T&P etc.required for prpoer completion of Work. | 250.49 | M2 | - | - |
| 7 | Fabrication and fixing of mild steel/iron work in grill, gates, railing, door, window frames including cutting, drilling, welding, riveting and fixing hinges where necessary with fixing in position including cost of all material, labour, T&PP etc. required for proper completion of work. | 1,527.92 | KG | - | - |
| 8 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws required for proper completion of work. | 8.82 | M2 | - | - |
| 9 | Cement Plaster with 1:4 cement and coarse sand including all cost of material labour, T&P etc required for prpoer completion of Work. | 605.53 | M2 | - | - |
| 10 | Distempering (oil bound distemper) two coat of premium quality (Burger, Asian, Nerolac) over one priming coat of cement primer on new surface after thoroughly brushing the surface free from mortar dropping making the surface even with plaster of paris, whiting and sand papered smooth including cost of materials, Labour, T&P etc. required for proper completion of work. | 605.53 | M2 | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.96 MB
TD02.pdf
Tender Documents • 3.80 MB
BOQ_2240602.xls
BOQ • 0.32 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .