CA No GE(H)-60/2021-22 SPECIAL REPAIRS TO OLD CONVENTIAL STREET LIGHT FITTING WITH ENERGY EFFICIENT LED LIGHT AND CONNECTED ITEMS AT DSTV AT HISAR MIL STN UNDER GE HISAR

Amount

Excavation in trenches not exceeding 1.5 m wide and not exc. 1.5 m depth for laying cables, foundation for pole etc and getting out in soft/loose soil complete all as specified and as directed.

Returning filling in incl spreading leveling watering and well ramming in layers n. exc 25cm thick etc complete all as specified and as directed.

Removing excavated material to distance n. exc 50m and depositing where directed at a level n. exc 1.5m above the starting point etc complete all as specified and as directed.

M&L for Sand cushioning 230mm thickness with dry sand (one layer of 80mm thickness before laying of cable and other layer of 150mm thickness after laying of cable) and punned down to 180mm after laying of cable in trenches for protection of cable complete all as directed. Note :- For the purpose of payment only punned thickness shall be measured.

M&L for brick covering to underground electric cable using sub class ‘B’ bricks, laid dry, flat, perpendicular to the direction of cable etc complete all as specified and directed.

M&L for PCC (1:2:4) type B1 using 20 mm graded stone aggregate as in coping and the like including weathering slightly rounded or chamfered angles complete all as specified and directed.

Supply , laying , jointing, testing and commissioning of 10 sqmm 2 core LT underground cable , 1100 volts grade, XLPE insulated and PVC sheathed, armoured heavy duty with multistrand aluminium conductors confirming to IS-7098, laid in trenches /fixed on wall /floor /road /culverts /pole or encased in GI pipe complete all as specified. Note : Sand cushioning, cable protection, GI protection pipe, clamps, jointing kits and excavation & earth work shall be measured & paid for separately.

Supply , laying , jointing, testing and commissioning of 16 sqmm 4 core LT underground cable , 1100 volts grade, XLPE insulated and PVC sheathed, armoured heavy duty with multistrand aluminium conductors confirming to IS-7098, laid in trenches /fixed on wall /floor /road /culverts /pole or encased in GI pipe complete all as specified. Note : Sand cushioning, cable protection, GI protection pipe, clamps, jointing kits and excavation & earth work shall be measured & paid for separately.

S & F for replacement of MCCB 415 Volts , 16 KA, 125 Amp , 04 pole,complete. Note :-Make of MCCB shall be same of that DB.

S&F for replacement of micro rex analog timer T31 daily switches in accotdance with IEC 60730-1 and 60730-2-7 manual switching ON/automatic/OFF hourly/daily/weekly switching dial with capacity segments clock precision +/- 5 Minute for the daily time switch -10C to +55C operating temperature and suitable contractor, relay with complete assembly all as specified and directed. As per Cat No 412812 of Legrand or equivqlent make as approved by the GE from the makes mentioned in Appendix 'C' hereinafter.

S&F for replacement of street light LED light fitting 60 Watt, new generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having TOP opening seperate driver compartment with IP66 protection and impact resistance of IK07, fixed on wall / pole all as specified and directed. Make : Cat Part No ENDURAPEARLNEOSL60WLED757PASYTOPC of Endura Peral Neo series of Havells or PCGLS T1 60 N (Item Code PUBO506015) of Polycab or LTESST60WLED/LS of C&S or Cat No LSTP-60-CDL of crompton or equivalent of make as mentioned in Appx 'C' list of makes here-in-after.

S&F for replacement PVC junction box suitable for street light of size not less than 300mm x 200mm x 100mm, made out of polycarbonate having front side openable shutter duly provided with locking arrangement and provided with 02 Nos aluminium bus bar of rating 32 Amp alongwith 01 No MCB 6 Amp SP and provision of 02 Nos cable entries, fixed on street light pole with proper size MS clamp with nut & bolt and connected assessories complete all as specified and directed.

M&L for Galvanized iron tubing, 40mm bore light grade, ISI marked, including all fittings and laid in trenches/under road/drains, fixed to poles/walls with required size of flat iron (40mmx6mm) clamps, bolts, nuts and washers for protection of LT electric cable complete. Note :- Excavation & earthwork shall be measured & paid for separately.

S&F for replacement of FRLS cable PVC insulated and PVC sheathed size 3x2.5 sqmm 1100 Volts grade, single core multistranded copper conductor from Junction box to street light through PVC conduit pipe 20mm dia complete all as specified and directed. Note :- Three run of 2.5 Sqmm cable shall be measured as single run of RM lenght.

Balaji Enterprises

M/S Sulakh Brothers

M/s A S Electrical

KUNAL ENTERPRISES