Conservation works in Adhinarayana Perumal Temple complex at Pazhaverkadu village,Ponneri Taluk ,Thiruvallur District

Amount

Earth work excavation for foundation (for narrow excavation) in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 10 mts and initial lift of 2 mts. and clearing and leveling the site, etc., complete complying with standard specification.

Supplying and filling in foundation in basement with filling sand in layars of 150mm thickness well watered rammed and consolidated complying with relevant std specification including cost of supplying filling M.sand

Supplying and filling with gravel including cost and conveyance of gravel and all labour charges for filling ramming etc., complete with standard specifications.

Lime concrete 1:4:8 (One of lime, four sand and eight hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and curing etc., complete complying with standard specification

Supply of new stone for carrying out Rajagopuram kalkaram walls, pavukkal and flooring including cost and conveyence etc., all complete. (A)-Stone length upto 10 feet)

Supply of new stone for carrying out Rajagopuram kalkaram walls, pavukkal and flooring including cost and conveyence etc., all complete. (B)-Stone length upto 10 feet to fourteen feet)

Dressing and fixing charges for new stones on rajagopuram Kalkaram including labour and all complete.(i)-Padmam

Dressing and fixing charges for new stones on rajagopuram Kalkaram including labour and all complete.(ii)-Jagathi

Dressing and fixing charges for new stones on rajagopuram Kalkaram including labour and all complete.(iii)-Adhistanam

Dressing and fixing charges for new stones on rajagopuram Kalkaram including labour and all complete.(iv)-Kumudhagam

Dressing and fixing charges for new stones on rajagopuram Kalkaram including labour and all complete.(v)-Gandam

Dressing and fixing charges for new stones on rajagopuram Kalkaram including labour and all complete.(vi)-Pattigai

Dressing and fixing charges for new stones on rajagopuram Kalkaram including labour and all complete.(vii)-Paatham

Dressing and fixing charges for new stones on rajagopuram Kalkaram including labour and all complete.(viii)-Kudam/Kalasam

Dressing and fixing charges for new stones on rajagopuram Kalkaram including labour and all complete.(ix)-Kudam

Dressing and fixing charges for new stones on rajagopuram Kalkaram including labour and all complete.(x)-Palagai

Dressing and fixing charges for new stones on rajagopuram Kalkaram including labour and all complete.(xi)-Bodhigai

Dressing and fixing charges for new stones on rajagopuram Kalkaram including labour and all complete.(xii)-Uthiram

Dressing and fixing charges for new stones on rajagopuram Kalkaram including labour and all complete.(xiii)-Prastharam

Dressing and fixing charges for new stones on rajagopuram Kalkaram including labour and all complete.(xiv)-For wall stone

Dressing and fixing charges for new stones on rajagopuram Kalkaram including labour and all complete.(xv)-For cut stone pillers

Dressing and fixing charges for new stones on rajagopuram Kalkaram including labour and all complete.(xvi)-Bodhiyal

Dressing and fixing charges for new stones on rajagopuram Kalkaram including labour and all complete.(xvii)-Uthiram

Dressing and fixing charges for new stones on rajagopuram Kalkaram including labour and all complete.(xviii)-Paavukkal

Dressing and fixing charges for new stones on rajagopuram Kalkaram including labour and all complete.(xix)-Wall inner stone

Dressing and fixing charges for new stones on rajagopuram Kalkaram including labour and all complete.(xx)-Nilaikkal

Dressing and fixing charges for new stones on rajagopuram Kalkaram including labour and all complete.(xxi)-Kabothagam

Labour charges for Pointing the Cut stone masonary work with limne mortar 1:2 excluding cost and conveyance of cut stone but including all labour charges. Scaffolding etc., complete with standard specifications. The lime used should be sourced from industry which is highly iron fortified and suitable for structural and masonry works.

Flooring with cut stone slab of size 600mmx600mm and other sizes suitable for site requirement not less than 100mm thick with machine cut edges and top surface dressed as directed by the departmental officers including cost and conveyance of materials to site and lobour charges for paving and Pointing With lime mortar 1:2 etc., complete

Weathering course in brick jelly lime concrete using broken brick jelly of size 20mm uniform gauge in pure slaked lime (no sand to be used) to the proportion of brick jelly to lime being 32:2.5 by volume and laid over the RCC roof slab ina single layer of required slope and finished by beating the concrete with wooden beaters of approved pattern, keeping the surface constantly wet by sprinkling lime jaggery water, etc., complete as per standard specification and as directed by the deparmental officers.

Finishing the top of roof with one course of machine pressed tiles of size 200mm x 200mm x 20mm of approved quality set in Lime Mortar 1:3 (One of lime and Three Sand) 12mm thick mixed with water proofing compound confirming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound imcluding curing etc., complete complying with standard specification and as directed by the departmental officers.

Removing undulated stone flooring from stone elemenets from the temple comple and stacking it for relay including cost and conveyence labour, handling and etc., All complete.(A)-Flooring stones

Removing undulated stone flooring from stone elemenets from the temple comple and stacking it for relay including cost and conveyence labour, handling and etc., All complete.(B)-Balibeedam stones 1,2,3.

Dismantling the existing damaged weathering course from the temple including removing all debris from the site of work

Cleaning the stone surfaces by water washing the stone elements like wall piller, uthiram, pothiyal, pavukkal and etc., including cost of material and labour charges etc.,

Supply of laterite stone including cost of all materials, transport charges to pazhaverkadu etc., all complete

Clean removal of lime plaster from walls including removing all debris from the site of work etc., complete.

Plastering with lime morar 1:1.5, 20mm thick including cost and conveyance of all materials and all labour charges, curing etc., complete complying with standard specifications.

Scaffolding charges for Vimanams and gopurams with casurina posts coconut or plam trees wherever necessay for main, form work and providing with Non Flamable Shaded coverings, providing ladder arrangements, country wood plant for wirking, inspecition etc., complete hire charges only for erection, maintenance and removing the same on completion of the work.(A)-15' height

Scaffolding charges for Vimanams and gopurams with casurina posts coconut or plam trees wherever necessay for main, form work and providing with Non Flamable Shaded coverings, providing ladder arrangements, country wood plant for wirking, inspecition etc., complete hire charges only for erection, maintenance and removing the same on completion of the work.(B)-25' height

Scaffolding charges for Vimanams and gopurams with casurina posts coconut or plam trees wherever necessay for main, form work and providing with Non Flamable Shaded coverings, providing ladder arrangements, country wood plant for wirking, inspecition etc., complete hire charges only for erection, maintenance and removing the same on completion of the work.(C)-50' height

Scraping the decayed lime plaster from the surface of Vimanams and Gopurms, carefully including isolated bricks or brickwork without damaging the vari vargams, racking out the joints, cleaning the surface with water, including all working in heights, hire chrges for special tools, brushes complete superficial area including all folds.(A)-For Kalkaram

Scraping the decayed lime plaster from the surface of Vimanams and Gopurms, carefully including isolated bricks or brickwork without damaging the vari vargams, racking out the joints, cleaning the surface with water, including all working in heights, hire chrges for special tools, brushes complete superficial area including all folds.(B)-For Vimanam 50' height

Providing Vargapoochu over the corewalls of Vimanams / Gopurams, with lime mortar 1:4 complete including shaping the mukhapathram, mahanasi, Koodu all ornamentals works to proper shape by embedding broken bricks of shaped / chiseled bricks, rough-plastering with Lime Mortar 1:4 and finishing with final ornamentals plastering and nayam theervani including cost and conveyance of all materials, labour therefore, lifting of materials, all working in heights, curing with water etc., complete including all extra for folding and including clearing from the vimanams/gopurams 100sft superficial area. for kalkaram.(A)-Vimanam /gopuram of ht. Up to 15'0" excluding Kalkaram

Providing Vargapoochu over the corewalls of Vimanams / Gopurams, with lime mortar 1:4 complete including shaping the mukhapathram, mahanasi, Koodu all ornamentals works to proper shape by embedding broken bricks of shaped / chiseled bricks, rough-plastering with Lime Mortar 1:4 and finishing with final ornamentals plastering and nayam theervani including cost and conveyance of all materials, labour therefore, lifting of materials, all working in heights, curing with water etc., complete including all extra for folding and including clearing from the vimanams/gopurams 100sft superficial area. for kalkaram.(B)-Vimanam /gopuram of ht. Up to 15'0" excluding Kalkaram

Refixing the removed stone flooring from the sannathi as same as it in existing position including labour charges for fixing, handling and etc., all complete. (A)-Flooring stones

Refixing the removed stone flooring from the sannathi as same as it in existing position including labour charges for fixing, handling and etc., all complete. (B)-Balibeedam stones

Painting two coats of newly plastered wall surface with ready mixed water emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complet complying with standard specification

Supplying and fixing Teak wood temple type door including all materisls, labour charges for manufacturing and fixing in position including all furniture fittings etc., complete with std. Specifications.

Painting new wood work with two coats of varnishing approved quality and color over one coat of white primer in all florrs the rate is to include cost of all materials, brushes scaffolding charges etc., complete complying with standard specifications.

Best varnish two coats for wood works etc., complete complying with standard specifications.

Providing new sudhai vigrahams in the vimanams and Rajagopurams with Copper rod reinforcement of suitable dia with binding wires wherever necessary, shaping the core with broken bricks set in LM 1:1:3 finishing the same with LM 1:1:3 bringing to the correct shape (Lakshana) in conformist with silpa sastra inclusive of special ornaments, weapons, peedam etc., complete and providing L.M. Nayam theervai wherever necessary. inclusive of cost and conveyance of all materials, such as cement broken bricks, and Copper rods. binding wire all labour for working in heights, curing liftiong of materials etc., complete including Exterior Emulsion painting 2 coats over a primary coat (one vigraham is accountable with on head, 4 hands with weapons, ornamental costumes etc., as per prathima lakshans, Vigraham height is measurable from the crown top to the bottom of foot only if peetam is provided the rate with peetam may be adopted as detailled hereunder) (DATA-AA) - (A)-Sudhai size above 1'0" up to 2'6"

Providing new sudhai vigrahams in the vimanams and Rajagopurams with Copper rod reinforcement of suitable dia with binding wires wherever necessary, shaping the core with broken bricks set in LM 1:1:3 finishing the same with LM 1:1:3 bringing to the correct shape (Lakshana) in conformist with silpa sastra inclusive of special ornaments, weapons, peedam etc., complete and providing L.M. Nayam theervai wherever necessary. inclusive of cost and conveyance of all materials, such as cement broken bricks, and Copper rods. binding wire all labour for working in heights, curing liftiong of materials etc., complete including Exterior Emulsion painting 2 coats over a primary coat (one vigraham is accountable with on head, 4 hands with weapons, ornamental costumes etc., as per prathima lakshans, Vigraham height is measurable from the crown top to the bottom of foot only if peetam is provided the rate with peetam may be adopted as detailled hereunder) (DATA-AA) - (B)-Sudhai size above 2'6" up to 3'6"

Brick masonry Lime Mortar 1:4 using Stock bricks including all varivargams, moulds, sthambams, mukapathrams, koodu, nasi and all ornamental brick work complete, all pancharams, atgarais, karnakoodus, etc., forming core walls of Rajagopuram / Vimanams complete including cost and conveyance of all materials including cement, all the labour charges including marking pathies shaping of the bricks, lifting of all the materials to required heights, curing and all extra for working in heights etc., complete 100cft cft Vimanam / gopuram

Supplying and fixing teak wood stem for Dhwajasthambam including required materials, labour charges for making and etc., all complete.

Brick work in Lime Mortar 1:4 using II class Table Moulded Chamber Burnt Bricks of size 9" x 43/8" x 23/4" including cost and conveyance of all materials and labour charges and all other incidental charges etc., complete complying with standard specification.

Clean removal of cement plaster from the compund wall etc., complete.,

Wiring with 2x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100V grade in s;uitable 35mmx45mm powder coated duct with door arrangements on wall and ceiling with MS accessories with Module GI switch box on wall with 6A ibe wat nidyke swutcg wutg nidyke fribt okate wutg oaubtubg if /syutavke colour with continuous earth wire conection of 14 SWG TC wire for Open MS duct Light point / fan point (for electronic regulator) (5 points / Coil) Higher End [Elec Data A]

Wiring with 2x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100V grade in s;uitable 35mmx45mm powder coated duct with door arrangements on wall and ceiling with MS accessories with Module GI switch box on wall with 6A ibe wat nidyke swutcg wutg nidyke fribt okate wutg oaubtubg if /syutavke colour with continuous earth wire conection of 14 SWG TC wire for Open MS duct Light point / fan point (for electronic regulator) (6 points / Coil) Higher End [Elec Data B]

Supply and fixing of 35mm x 45mm powder coated duct arrangement with MS angle supporting bolts and nuts with washer arrangements in wall and ceiling etc., all complete [Elec Data C]

Supply and fixing of 35mm x 45mm powder coated duct arrangement with MS angle supporting bolts and nuts with washer arrangements in wall and ceiling etc., all complete [Elec Data D]

Supply and fixing of 1X 1 LED surface panel light surface mounting illumination of (LUKERs cat no LNPSRS 30) 30 W LED fitting celling mounting system complete with PVC unsheated copper leads from terminals to the fittings (LUKER/ equal make ) (Elec Data E)

Supplu and fixing 16" Ari circulator wall mounting fan (Havells make) on wall with all necessary arrangement and testing etc., all complete (Elec Data F)

Supply and fixing og 60W LED street light fitting with LED (Lower end) with 32mm dia. GI pipe (class B) with 1 no.32 mm GI bend complete on existing post/on wall with PVC unsheathed copper leads with MS clamps and with painting. (SD 536)

Supply and fixing of single box type 4'36W fluorescent fitting complete with electronic ballast with TW round blocks on wall or celling with flu tube with PVC unsheathed copper leads from terminals to the fitting (SD 87)

Supply and fixing of 1200mm (48") AC celling fan complete with stepped electronic 300W regulator with 300mm down rod on the existing clamp (SD110)

Supply and fixing of 300mm (12") sweep (light duty) AC exhaust fan complete without provision of hole in the wall (SD 115)

Supply and fixing of 2 nos.6A two module socket, 1 no. 6/16A two module socket, 2 nos. 6A one module switch, 1 no. 16A one module switch on suitable module surface mounting Box (Plastic) with module cover plate (Plastic) on wall with connections. Higher End (SD 514)

Supply and fixing of 2 nos.6A two module socket, 1 no. 6/16A two module socket, 2 nos. 6A one module switch, 1 no. 16A one module switch on suitable module surface mounting Box (GI) with module cover plate (Plastic) on wall with connections. Higher End (SD 516)

Supply and Run of 2 of 2.5 sq.mm. (36/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable 35mm X 20mm powder coated duct arrangement rate on wall and celling with continuous earth wire connection by 2.5 sq.mm. PVC insulated SC unsheathed copper wire with painting of suitable colour (Elec Data G)

Supply and Run of 2 of 6 sq.mm. (84/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable 35mm X 20mm powder coated duct arrangement rate concealed in wall and celling with continuous earth wire connection by 2.5 sq.mm PVC insulated SC unsheathed copper wire and making good of the concealed portion with suitable colour. (Elec Data H)

Supply and Run of 4 of 6 sq.mm. (84/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable 35mm X 45mm powder coated duct arrangement on wall and celling with continuous earth wire connection by 2.5 sq.mm. PVC insulated SC unsheathed copper wire with painting of suitable colour (Elec Data I)

Supply and Run of 4 of 10 sq.mm. (140/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable 35mm X 45mm powder coated duct arrangement concealed in wall and celling with continuous earth wire connection of 14 SWG TC wire with painting of suitable colour. (Elec Data J)

Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 40A DP MCB Isolator as incoming and 6 nos. 6A to 32A SP MCB as outing on suitable angle iron frame on wall with earth connection only. Higher End (SD 600)

Supply and fixing of 12 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 40A DP MCB Isolator as incoming and 10 nos. 6A to 32A SP MCB as outing on suitable angle iron frame on wall with earth connection only. Higher End (SD 611)

Supply and fixing of 4 way Horizontal Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 40A 4P MCB Isolator as incoming and 12 nos. 6A to 32A SP MCB as outing on suitable angle iron frame on wall with earth connection only. Higher End (SD 623)

Supply and fixing of 4 way Vertical Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 63A 4P MCB switch as incoming and 12 nos. 6A to 32A SP MCB as outing on suitable single iron frame on wall with earth connection only. Higher End (SD 656)

Supply and clamping of 4 X 16 sqmm PVC LTUG armouredcable and post on wall with MS clamps (SD 221)

Supply and Laying of 4 X 16 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.72 metre and refilling the earth to make good (SD 745)

Supply and fixing of brass cable gland for 3-1/2 X 25 sq.mm. PVC armoured LTUG cable with earth connection (SD 186)

Supply and Providing cable end termination of 3-1/2 X 25 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete. (SD 235)

Supply and Laying of 3 1/2 X 120 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good (SD 751)

Supplying and clamping of 3 1/2" X 120 sq.mm PVC LTUG armoured cable on post or wall MS clamps. (SD 227)

Supply and fixing of brass cable gland for 3-1/2 X 120 sq.mm. PVC armoured LTUG cable with earth connection (SD 191)

Supply and providing cable end termination of 3-1/2 X 120 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical eonnection complwtw LS (SD 240)

Supply and fixing of 100A TPN sheet doubtle break switch with HRC fuse and neutral on suitable angle iron frame work earth connection only (SD 169)

Supply and fixing of TNEB meter board suitable for 3 phase 100A service connection made up of suitable angle iron frame work of size2 feet X 1-1/2 feet using angle iron of size 1-1/2" X 1-1/2" X 1/4" rigidly fixed on wall covered with hylem sheet of size 2 feet X 1-1/2 feet of 12mm thickness with necessary bolts and nuts supports and supply and fixing of 3 Nos. 100A fuse units (500V), 1 No. neutral link, copper earth flat of size 1" X 1/4" with inter connection of EB meter to fuse units by 16 sq.mm PVC insulated copper wire with earth connection complete (SD 130)

Earthing as per the ISI specification with an earth electrode of 2.10 metre class 'B' GI pipe of dia not less than 40mm with copper earth plate of size 125mm X 50mm X 6mm with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry (SD 233)

Supply and fixing of 150W LED street light fitting with LED (Higher end) with 40mm dia. GI pipe (class B) with 1 no.40mm GI bend complete on the existing post/ on wall with 1.5 sq.mm PVC unsheathed copper leads with MS clamps and with painting (SD 539)

TNEB service charge

Sub Total

J C ENGINEERING CONSTRUCTION COMPANY