REPAIR/MAINTENANCE OF CI/DI/GI PIPES, VALVE, JOINT AND REPLACEMENT OF OLD DAMAGE CI PIPES WITH NEW DI PIPES LINE (SOUTH AREA) OF AGE E/M WS UNDER UNDER GE(U) E/M MEERUT

Amount

Taking down old existing unserviceable bib tap and S&F PTMT( Polytetra Methyllene Terephthalate ) Bib taps suitable for 20 mm bore pipe standard of PTMT any colour screwed, for iron pipe and fixed ( Minimum weight 20 mm-125 gms complete all as specified .Make : Prayag or equivalent

Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for foundations etc. or for shafts, well cess pits, manholes,pier holes, laying of pipe and cables etc. but not exceeding 10 sqm on plan including dressing/trimming sides and levelling/grading & ramming bottom of excavation and getting out in soft/loose soil complete all as specified.

Returning ,filling in , including spreading , levelling , watering and well ramming in layer not exceeding 25 cm thick in any type of soil complete all as specified.

Removing excavated material ( soils) not exceeding 50m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified.

M&L mild steel clamps , including bolts , if required; made to shape including painting of clamps with two coats of aluminium paint over a coat of red oxide primer for stopping leaking of pipe line of any decsription and in any position and similar small articles conforming to Fe-290 Gde -E-165 complete all as specified.

M&L Cast iron fittings for spigot socketed pipes upto 150mm nominal bore such as Bends ( any type, radius and angle) Tapers any type, ( straight , bend, increasing, decreasing or double socket etc.) Tee pieces single branch , 'Y' junction, double branch , cross ( all sockets or socket and spigot ) collars, caps and plugs (Joints and jointing materials shall be measured separately)

M&L Cast iron fittings for flanged end pipes upto 150mm nominal Connecting pieces one end flanged and other socket or spigot and bell mouth pieces one end flanged other end tapering as bell mouth (Joints and jointing materials shall be measured separately)

M&L Cast iron fittings for flanged end pipes 200mm nominal to 300mm nominal bore Connecting pieces one end flanged and other socket or spigot and bell mouth pieces one end flanged other end tapering as bell mouth (Joints and jointing materials shall be measured separately)

Dismantling and opening carefully old non-functional sluice valve of 250mm bore of of any description and in any position, servicing, overhauling and greasing etc complete all as specified. Note:- (i) Taking up/ down of sluice valve shall be measured and paid separately. (ii) Wornout/ defective parts shall be renewed and shall be measured and paid separately at supplied only rates.

Dismantling and opening carefully old non-functional sluice valve of 200mm bore of of any description and in any position, servicing, overhauling and greasing etc complete all as specified. Note:- (i) Taking up/ down of sluice valve shall be measured and paid separately. (ii) Wornout/ defective parts shall be renewed and shall be measured and paid separately at supplied only rates.

Dismantling and opening carefully old non-functional sluice valve of 150mm bore of of any description and in any position, servicing, overhauling and greasing etc complete all as specified. Note:- (i) Taking up/ down of sluice valve shall be measured and paid separately. (ii) Wornout/ defective parts shall be renewed and shall be measured and paid separately at supplied only rates.

Dismantling and opening carefully old non-functional sluice valve of 100mm bore of of any description and in any position, servicing, overhauling and greasing etc complete all as specified. Note:- (i) Taking up/ down of sluice valve shall be measured and paid separately. (ii) Wornout/ defective parts shall be renewed and shall be measured and paid separately at supplied only rates.

Dismantling and opening carefully old non-functional sluice valve of 80mm bore of of any description and in any position, servicing, overhauling and greasing etc complete all as specified. Note:- (i) Taking up/ down of sluice valve shall be measured and paid separately. (ii) Wornout/ defective parts shall be renewed and shall be measured and paid separately at supplied only rates.

M&L for run lead joint to 80 mm bore Spigot and socketed pipes and fittings complete all as specified and directed.

M&L for run lead joint to 100 mm bore Spigot and socketed pipes and fittings complete all as specified and directed.

M&L for run lead joint to 150 mm bore Spigot and socketed pipes and fittings complete all as specified and directed.

M&L for run lead joint to 200 mm bore Spigot and socketed pipes and fittings complete all as specified and directed.

M&L for run lead joint to 250 mm bore Spigot and socketed pipes and fittings complete all as specified and directed.

S&F rubber or fibre board gasket not less than 3mm thick suitable for 80mm nominal bore of pipe including necessary mild steel bolts, washers and nuts complete all as specified and directed.

S&F rubber or fibre board gasket not less than 3mm thick suitable for 100mm nominal bore of pipe including necessary mild steel bolts, washers and nuts complete all as specified and directed.

S&F rubber or fibre board gasket not less than 3mm thick suitable for 150mm nominal bore of pipe including necessary mild steel bolts, washers and nuts complete all as specified and directed.

S&F rubber or fibre board gasket not less than 3mm thick suitable for 200mm nominal bore of pipe including necessary mild steel bolts, washers and nuts complete all as specified and directed.

S&F rubber or fibre board gasket not less than 3mm thick suitable for 250mm nominal bore of pipe including necessary mild steel bolts, washers and nuts complete all as specified and directed.

S&F rubber or fibre board gasket not less than 3mm thick suitable for 300mm nominal bore of pipe including necessary mild steel bolts, washers and nuts complete all as specified and directed.

Dismantling/ taking down old wornout rubber or fibre board gasket from flanged joints by unbolting flanged joints and S&F rubber or fibre board gasket suitable for 80mm nominal bore of pipe complete all as specified and directed. Note:- Mild steel bolts, washers and nuts if any renewed shall be measured and paid separately)

Dismantling/ taking down old wornout rubber or fibre board gasket from flanged joints by unbolting flanged joints and S&F rubber or fibre board gasket suitable for 100mm nominal bore of pipe complete all as specified and directed. Note:- Mild steel bolts, washers and nuts if any renewed shall be measured and paid separately)

Dismantling/ taking down old wornout rubber or fibre board gasket from flanged joints by unbolting flanged joints and S&F rubber or fibre board gasket suitable for 150mm nominal bore of pipe complete all as specified and directed. Note:- Mild steel bolts, washers and nuts if any renewed shall be measured and paid separately)

Dismantling/ taking down old wornout rubber or fibre board gasket from flanged joints by unbolting flanged joints and S&F rubber or fibre board gasket suitable for 200mm nominal bore of pipe complete all as specified and directed. Note:- Mild steel bolts, washers and nuts if any renewed shall be measured and paid separately)

Dismantling/ taking down old wornout rubber or fibre board gasket from flanged joints by unbolting flanged joints and S&F rubber or fibre board gasket suitable for 250mm nominal bore of pipe complete all as specified and directed. Note:- Mild steel bolts, washers and nuts if any renewed shall be measured and paid separately)

Taking up cast iron 150mm dia water mains ( including all fittings ), with spigot and socket ends and lead joints including burning out joints and recovering lead complete all as specified.

M&L 150mm nominal bore ductile iron pipes with spigot and socketed ends , centrifugally cast(spun) , class K9, in any length , externally coated with metalic Zinc Coating finished with bituminous paint and internally cement mortar lining laid in trenches/ fixed to walls or under floors etc. and testing complete all as specified of the following bore:- Note :- Excavation, earthwork and FI clamps, Jointing and jointing materials shall be measured and paid separately)

M&L 100mm nominal bore ductile iron pipes with spigot and socketed ends , centrifugally cast(spun) , class K9, in any length , externally coated with metalic Zinc Coating finished with bituminous paint and internally cement mortar lining laid in trenches/ fixed to walls or under floors etc. and testing complete all as specified of the following bore:- Note :- Excavation, earthwork and FI clamps, Jointing and jointing materials shall be measured and paid separately)

M&L for Cutting of existing 80mm nominal bore cast iron pipes and reducing to required length in position for insertion of new tees, branches , etc complete all as specified and directed. Note: Fittings shall be measured and paid separately under appropriate item(s).

M&L for Cutting of existing 100mm nominal bore cast iron pipes and reducing to required length in position for insertion of new tees, branches , etc complete all as specified and directed. Note: Fittings shall be measured and paid separately under appropriate item(s).

M&L for Cutting of existing 150mm nominal bore cast iron pipes and reducing to required length in position for insertion of new tees, branches , etc complete all as specified and directed. Note: Fittings shall be measured and paid separately under appropriate item(s).

M&L for Cutting of existing 200mm nominal bore cast iron pipes and reducing to required length in position for insertion of new tees, branches , etc complete all as specified and directed. Note: Fittings shall be measured and paid separately under appropriate item(s).

M&L for Cutting of existing 250mm nominal bore cast iron pipes and reducing to required length in position for insertion of new tees, branches , etc complete all as specified and directed. Note: Fittings shall be measured and paid separately under appropriate item(s).

M&L for construction of Brick masonry valve pit of 1000mmx1000mmx1000mm internal size consisting of Mild steel frame and cover complete complete all as specified and shown in drawing No. CEBZ drg No. TD/EM/12

M&L for construction of Brick masonry valve pit of 1200mmx1200mmx1200mm internal size consisting of Mild steel frame and cover complete complete all as specified and shown in drawing No. CEBZ drg No. TD/EM/12

Supplying ,laying, jointing and testing 15mm nominal bore mild steel galvanised water tubing, medium grade (ISI-1239 marked) with all fittings like bends, elbows, Tee, reducers, sockets, unions etc laid in trenches complete all as specfied and directed.

Supplying ,laying, jointing and testing 20mm nominal bore mild steel galvanised water tubing, medium grade (ISI-1239 marked) with all fittings like bends, elbows, Tee, reducers, sockets, unions etc laid in trenches complete all as specfied and directed.

Supplying ,laying, jointing and testing 25mm nominal bore mild steel galvanised water tubing, medium grade (ISI-1239 marked) with all fittings like bends, elbows, Tee, reducers, sockets, unions etc laid in trenches complete all as specfied and directed.

Supplying ,laying, jointing and testing 40mm nominal bore mild steel galvanised water tubing, medium grade (ISI-1239 marked) with all fittings like bends, elbows, Tee, reducers, sockets, unions etc laid in trenches complete all as specfied and directed.

Supplying ,laying, jointing and testing 50mm nominal bore mild steel galvanised water tubing, medium grade (ISI-1239 marked) with all fittings like bends, elbows, Tee, reducers, sockets, unions etc laid in trenches complete all as specfied and directed.

Supplying ,laying, jointing and testing 80mm nominal bore mild steel galvanised water tubing, medium grade (ISI-1239 marked) with all fittings like bends, elbows, Tee, reducers, sockets, unions etc laid in trenches complete all as specfied and directed.

Supplying ,laying, jointing and testing 100mm nominal bore mild steel galvanised water tubing, medium grade (ISI-1239 marked) with all fittings like bends, elbows, Tee, reducers, sockets, unions etc laid in trenches complete all as specfied and directed.

Supplying ,laying, jointing and testing 150mm nominal bore mild steel galvanised water tubing, medium grade (ISI-1239 marked) with all fittings like bends, elbows, Tee, reducers, sockets, unions etc laid in trenches complete all as specfied and directed.

Taking out old unserviceable GI pipes, laid in trenches or under floors or fixed to walls including all fittings and disconnecting from branch connections complete all as specified and directed for 15mm bore pipe complete all as specified.

Taking out old unserviceable GI pipes, laid in trenches or under floors or fixed to walls including all fittings and disconnecting from branch connections complete all as specified and directed for 20mm bore pipe complete all as specified.

Taking out old unserviceable GI pipes, laid in trenches or under floors or fixed to walls including all fittings and disconnecting from branch connections complete all as specified and directed for 25mm bore pipe complete all as specified.

Taking out old unserviceable GI pipes, laid in trenches or under floors or fixed to walls including all fittings and disconnecting from branch connections complete all as specified and directed for 40mm bore pipe complete all as specified.

Taking out old unserviceable GI pipes, laid in trenches or under floors or fixed to walls including all fittings and disconnecting from branch connections complete all as specified and directed for 50mm bore pipe complete all as specified.

Taking out old unserviceable GI pipes, laid in trenches or under floors or fixed to walls including all fittings and disconnecting from branch connections complete all as specified and directed for 80mm bore pipe complete all as specified.

Taking out old unserviceable GI pipes, laid in trenches or under floors or fixed to walls including all fittings and disconnecting from branch connections complete all as specified and directed for 100mm bore pipe complete all as specified.

Taking down of existing unserviceable gate valve and S&F Gunmetal , globe or gate valves, with iron wheel head, screwed both ends for 20 mm bore dia. iron pipe class 2, suitable for working pressure upto 1.6Mpa and fixed complete all as specified.

Taking down of existing unserviceable gate valve and S&F Gunmetal , globe or gate valves, with iron wheel head, screwed both ends for 25 mm bore dia. iron pipe class 2, suitable for working pressure upto 1.6Mpa and fixed complete all as specified.

Taking down of existing unserviceable gate valve and S&F Gunmetal , globe or gate valves, with iron wheel head, screwed both ends for 40 mm bore dia. iron pipe class 2, suitable for working pressure upto 1.6Mpa and fixed complete all as specified.

Taking down of existing unserviceable gate valve and S&F Gunmetal , globe or gate valves, with iron wheel head, screwed both ends for 50 mm bore dia. iron pipe class 2, suitable for working pressure upto 1.6Mpa and fixed complete all as specified.

Taking up/ down of existing unserviceable 100mm bore Reflux valve (NRV) of any description/ in any position, taking out joints and removing to stores complete all as specified.

Taking up/ down of existing unserviceable 150mm bore Reflux valve (NRV) of any description/ in any position, taking out joints and removing to stores complete all as specified.

S&F Cast Iron Reflux valve (NRV) Single door pattern with Bye pass arrangement,Class PN 1.6, both end flanged, suitable for 100mm bore pipe (ISI-5312 ), Neoprene rubber gasket, nuts, bolts and washers etc. complete all as specified and directed . ( Mild steel nuts, bolts, washers, gasklets shall be deemed included in unit rate.)

S&F Cast Iron Reflux valve (NRV) Single door pattern with Bye pass arrangement,Class PN 1.6, both end flanged, suitable for 150mm bore pipe (ISI-5312 ), Neoprene rubber gasket, nuts, bolts and washers etc. complete all as specified and directed . ( Mild steel nuts, bolts, washers, gasklets shall be deemed included in unit rate.)

Taking down of existing unserviceable stainless steel spindle (stem) of sluice valve of 80mm bore and S&F stainless steel spindle including necessary cleaning of sluice valve complete all as specified.

Taking down of existing unserviceable stainless steel spindle (stem) of sluice valve of 100mm bore and S&F stainless steel spindle including necessary cleaning of sluice valve complete all as specified.

Taking down of existing unserviceable stainless steel spindle (stem) of sluice valve of 150mm bore and S&F stainless steel spindle including necessary cleaning of sluice valve complete all as specified.

Taking down of existing unserviceable stainless steel spindle (stem) of sluice valve of 200mm bore and S&F stainless steel spindle including necessary cleaning of sluice valve complete all as specified.

Taking down of existing unserviceable stainless steel spindle (stem) of sluice valve of 250mm bore and S&F stainless steel spindle including necessary cleaning of sluice valve complete all as specified.

Taking down of existing unserviceable stainless steel / Gun metal nut for spindle (stem) of sluice valve of 80mm bore of any pressure rating and S&F Gun metal nut for spindle complete all as specified.

Taking down of existing unserviceable stainless steel / Gun metal nut for spindle (stem) of sluice valve of 100mm bore of any pressure rating and S&F Gun metal nut for spindle complete all as specified.

Taking down of existing unserviceable stainless steel / Gun metal nut for spindle (stem) of sluice valve of 150mm bore of any pressure rating and S&F Gun metal nut for spindle complete all as specified.

Taking down of existing unserviceable stainless steel / Gun metal nut for spindle (stem) of sluice valve of 200mm bore of any pressure rating and S&F Gun metal nut for spindle complete all as specified.

Taking down of existing unserviceable stainless steel / Gun metal nut for spindle (stem) of sluice valve of 250mm bore of any pressure rating and S&F Gun metal nut for spindle complete all as specified.

Taking down of existing unserviceable sluice valve including rubber gaskets and mild steel bolts, nuts and washers and S&F Cast Iron sluice valve 80mm dia,Class PN 1.6 with iron wheel head both end flanged , non rising type with stainless steel spindle complete with Neoprene rubber gasket, nuts, bolts and washers etc. complete all as specified and directed . ( Mild steel nuts, bolts, washers, gasklets shall be deemed included in unit rate.)

Taking down of existing unserviceable sluice valve including rubber gaskets and mild steel bolts, nuts and washers and S&F Cast Iron sluice valve 100mm dia,Class PN 1.6 with iron wheel head both end flanged , non rising type with stainless steel spindle complete with Neoprene rubber gasket, nuts, bolts and washers etc. complete all as specified and directed . ( Mild steel nuts, bolts, washers, gasklets shall be deemed included in unit rate.)

Taking down of existing unserviceable sluice valve including rubber gaskets and mild steel bolts, nuts and washers and S&F Cast Iron sluice valve 150mm dia,Class PN 1.6 with iron wheel head both end flanged , non rising type with stainless steel spindle complete with Neoprene rubber gasket, nuts, bolts and washers etc. complete all as specified and directed . ( Mild steel nuts, bolts, washers, gasklets shall be deemed included in unit rate.)

Taking down of existing unserviceable sluice valve including rubber gaskets and mild steel bolts, nuts and washers and S&F Cast Iron sluice valve 200mm dia,Class PN 1.6 with iron wheel head both end flanged , non rising type with stainless steel spindle complete with Neoprene rubber gasket, nuts, bolts and washers etc. complete all as specified and directed . ( Mild steel nuts, bolts, washers, gasklets shall be deemed included in unit rate.)

M&L for making hole in GI/DI/CI pipe line including cutting of pipe where required for making branch connections , including S&F mild steel clamps made out of 40x6 mm flat iron duly fitted with suitable size of GI socket suitable for taping 20mm nominal bore pipe complete all as specified and directed.

M&L Making holes/ bores in GI/CI/DI water mains including cutting of pipe where required for making branch connection of 25mm bore for alterations or additions ( or lengthening screw on pipe to form connector) and providing clamp made out of FI 40x6mm and tightening with mild steel nuts, bolts and washers etc. complete all as specified.

M&L Making holes/ bores in GI water mains including cutting of pipe where required for making branch connection of 40mm bore for alterations or additions ( or lengthening screw on pipe to form connector) and providing clamp made out of FI 50x6mm and tightening with mild steel nuts, bolts and washers etc. complete all as specified.

M&L Making holes/ bores in GI/CI/DI water mains including cutting of pipe where required for making branch connection of 50mm bore for alterations or additions ( or lengthening screw on pipe to form connector) and providing clamp made out of FI 75x6mm and tightening with mild steel nuts, bolts and washers etc. complete all as specified.

rajendra agrawal

Bidder Name

Defence Auto Works