PROVISION OF RAIN WATER PROTECTION SHED TO ADMIN BLDG AND SAILORS LIVING BLOCK OF ICGS RATNAGIRI.

Amount

M & L for non-skid Ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38sqm, in floors etc. set and jointed in neat bedding layer of mortar 15 mm thick in Cm 1:4 for laying floor finishes complete all as specified.

M&L for non skid Ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick rendering in CM 1: 4 complete all as specified and as directed by the Engineer-in-Charge

S & F for Steel work in tubular trusses including special shaped washer, nut, bolt, etc. complete using ERW or induction butt welded tubes conforming to I.S. 1161- 1979 grade St.- 240 complete all as specified.

S & F for gusset plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, including nut bolt and washer without any attachment Fe410-W (Gde E - 250) quality A complete all as specified.

M & L for preparation of steel surfaces of new or previously untreated surfaces over 10 cm in width or grith not otherwise described and two coat of synthetic enamel paint over one coat of red oxide complete all as specified.

S & F for Pre-painted galvatume aluminium zinc coating GI based corrugated stel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified.

S & F for Pre-painted galvatume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified.

S & F 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified.

S & F 110 mm PVC (SWR) bends any radius complete all as specified.

M & L for machine cut laterite stone masonry wall of squared rubble, regular coursed, well bounded, bedded and solidy hearted, built in CM 1: 4 complete all as specified and as directed.

Providing, cement concrete Type B1 1:2:4 using 20mm graded aggregates as in kerbs, cills, steps; seismic and other similar bands, plinth courses, string courses, lacinjg courses, parapets and railings upto 60cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed.

M&L for Rendering 15mm thicking CM 1:4 on fair faces of laterite stone masonry or concrete surfaces finished fair and even complete all as specified and directed.

M & L for 18-20 mm Granite (or any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixtures of pigment to match with shade of granite complete all as specified and as dirercted.

M & L Providing edge moulding to 18-20mm thick granite stone any descriptions of counters vanities etc. including machine polishing to edge to give high gloss finish etc. complete.

M & L preparation of new plastered surface and applying three coats of white wash on walls complete all as directed by Engg in charge.

Point wiring with PVC insulated unsheathed FRLS stranded coppper conductor cable of size 1.5 Sq mm, with PVC insulated unsheathed stranded copper conductor cable of size 1.5 Sq mm stranded for earth continuity wire, to be drawn in and including, PVC medium grade conduit not less then 25mm dia. concealed in walls/roof/floors with GI sheet metal sunken modular switch/\- terminal Box 1.2mm thick with Zinc coating of 120 GSM and Modular plate and brass screws with cup washers all as directed and specified. Note : (1) Circuit wire of size 2.5 sqmm from DB to switch boards shall be included in quoted rate. 2) Cutting /chasesing of wall/plaster and making good to match with the adjoining surface shall be included in quoted rate. a) One light point controlled by one, one way switch.

One ceiling /exhaust fan point controlled by one switch and regulator

One 3 pin 5 amp socket out point on the same board with other switches

One 3 pin 5 amp socket outlet point on independent board.

All as per same in item No 16.03 above but for one socket outlet 16 Amp on independent board with 2.5 Sq mm cable and 2.5 Sq mm earth wire. (power point 15 Amps sockets) Note: 1. Circuit wire of size 4.0 sqmm from DB to switch boards shall be included in quoted rate.

S & F modular switch single pole one way 5 amps/6 amps.

S&F modular switch piano flush type single pole one way 15 amps /16amps

S/F modular Socket out let 2 in one, 5 amp, 2/3pin

S/F modular Socket, 6A/16A-2/3 pin combined 2 module.

S & F Modular Electronic regulator 100/120 Watt step type

S & F ceiling rose, surface bakelite 65X 50 mm three terminal

S & F Modular white cover plate with frame 3 module make Legrand, Schneider, hager or equivalent makes specified.

S & F Modular white cover plate with frame 8 module make Legrand, Schneider, hager or equivalent makes specified.

S & F LED tube light fittings decorative ultra slim linear fixture with extrudalluminium heat sink environment friendly Energy efficient ready to use pack 18/20 Watt, 4 feet surface mounting type extruded PVC , snap on installers and domestic electronic driver, connector block ect, with all assoceries intenallt prewired & including connecting up with 2 core flexible copper conductor cable with suitable size & suitable for and mounting clamps PVC square box 75X 75 mm - 2 nosetc. make-WIPRO/HAVELLS/JAQUAR/PHILLIPS

S & F Energy efficient BEE five star rated, BLDC ceiling fan 1200 mm sweep and connecting up including provision of three core flexible copper wire 23/0076 from ceiling rose to ceiling fan complete in all respect all as specified and directed. Make - Crompton Greaves/ Bajaj/Orient/Havells

S & F Sub main wiring power/circuit using PVC insulated unsheathed, stranded copper conductor cable 2 Single core of size 2.5 Sqmm, earth continuity conductor of size 2.5 Sq mm to be drawn through in and including PVC conduit fixed on walls/roof/floors all as directed by engineer in charge. Note (i) Two wires of 2.5 Sq mm and one wire of 2.5 Sq mm PVC conduit shall be measured as one unit. (ii) Cutting/chaseing of wall/plaster and making good to match with adjoining surface shall be included in quoted rate.

Advait Enterprises

BA Enterprises