Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3 LAccepted-AOC | L1 | Accepted-AOC Accepted due to lowest rates | |
| 2 | L2₹3.8 L+₹27,243.75 (7.66%)Rejected-Finance N A | FARIDABAD | HARYANA | 121004 | L2 | Rejected-Finance Rejected | |
| 3 | L3₹5.2 L+₹1.7 L (47.5%)Rejected-Finance R O VILLAGE NALAG P O PAHAL SUB TEH SUNI DISTT SHIMLA | SHIMLA | HIMACHAL PRADESH | 171001 | L3 | Rejected-Finance Rejected |
Tender Value
₹2.1 L
EMD Value
₹4,200
Closing Date
22 Mar 2021, 5:00 pmClosed
Executive Engineer R B MC Shimla
Executive Engineer R B MC Shimla
Construction of Toilet over existing Toilet at khalini Chowk in ward No 33
2021_MC_45174_25
625Dated23022021
Open Tender
Civil Works
Item Rate
60 days
Shimla
Please refer Tender Documents
6 documents required · 6 mandatory
₹350
Executive Engineer R B MC Shimla
₹4,200
10 Aug 2021
6 Mar 2021
23 Mar 2021
6 Mar 2021
22 Mar 2021
6 Mar 2021
Amount
Providing from work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm so as to give a fair finish including centring, shuttering strutting and propping etc. with wooden battens and ballies, height of propping and centring below supporting floor to ceiling upto all heights and removal of the same for insitu-reinforced concrete & plain concrete work in Columns, pillars, posts and struts Square, rectangular or polygonal in plan.
Sides and soffits of beams, beam haunchings, cantilevers,girders, bressumers and lintels exceeding 1 Mtr. in depth in all heights from floor.
Providing mild steel/ Tor steel reinforcement for R.C.C. work including bending, binding and placing in position complete upto floor all level-tor steel
Providing and laying cement concrete 1:1.5:3 (1 cement :1.5: Sand : 3 graded stone aggregate 20 mm nominal size and curing complete excluding cost of form work. Independent piers, columns and pillars upto floor two level.
Suspended floors roofs, landings and shelves and their supports, balconies, beams, girders, bressumers and cantilevers upto floor two level.
Half brick masonry in common burnt clay building bricks in : Cement Mortar 1:4 (1 Cement : 4 Sand) Second Class Bricks
15mm cement plaster in single coat on the rough side of brick/concrete/stone walls for interior plastering upto floor all level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth in cement mortar 1:4 (1 cement: 4 sand)
Providing and fixing 10mm thick anti skid water proof stain and impect resistent heavy duty vetrified tiles Nitco or equivalant 600x600mmx10mm manufactured of approved shade and colour in flooring, treads of steps and landings laid over 12mm thick cement mortar 1:3 (1 cement : 3 sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete.
White glazed tiles 6 mm thick in skirting risers of steps and dado 12 mm thick cement mortar 1:3 (1 cement :3 sand) and jointed with cement slurry.
Steel work welded in built up sections,trusses and framed work,including cutting,hosting,fixing in position and applying a priming coat of red lead paint.In beams joists channels,angles,tee,flats with connecting plates or angle cleats as in main and cross beams,hip and jack rafters,purlins connected to common rafters and the like.
Providing and fixing 0.60mm thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia metre with prepainted limpet and rubber washers complete with all accesoriees as required as per the direction of Engineer-in-charge.
Providing and fixing ridges or hips 60 cm overall with 0.60mm thick prepainted steel sheets in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts & nuts 6mm dia & prepainted G.I. limpet and bitumen washers complete with all accessories as required as per the direction of Engineer in Charges
Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima) or its equarlied on undecorated wall surfaces (two coats) to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etc including sand paper smooth complete.
P/L in treaches galvanished M.S. Tubes tube filled including carriage of material in all leads and lift 20mm nominal bore
15mm nominal bore
P/L P.V.C. Pipe 75mm dia for approved quality
100mm nominal bore
Providing and fixing vitreous china water closet squatting pan (Indian type W.C. pan)size 580mm (earth work, bed concrete, foot rest and trap to be measured and paid for separately) – Orrissa pattern
Providing and fixing viterous china basion with single hole for pillar tap with C.I or M.S brackets pained white including cutting holes and making good the same but excluding fittings:- a) Flat back :- i) 630mmx450mm
P/F Viterous china bowl pattern urinal connection with waste pipe by means of white lead mixed with chopped hamp waste water pipe to be measured paid to be seprately flat back type of size 433x260x350mm
P/F water storage tank 500 ltr ISI 12701 Marked, G.I. Inlet and outlet connecting 15mm nominal bore ball valve and mosquite P.V.C. Cover with locking arrangement including hosting upto all height as per direction of Engineer in charge including carriage of material in all leads and lift 500 Ltrs capacity
Providing and fixing 8 to 10 liters P.V.C low level flushing cistern with a pair of C.I or mild steel brackets complete with fitting in all respect.
Providing and fixing 600mmx450mm bevelled edge miror of superior glassmounted on 6mm thick A.C sheet or plywood sheet and fixed to woooden plugs with C.P brass screws and washers
Kaku Ram
Kuldeep Sharma
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .