Ponda Riverfront Development near Ponda Municipal Council under Scheme for Special Assistance to States for Capital Investment SASCI 2023-24

CLEARING GRASS AND REMOVAL OF RUBBISH UPTO A DISTANCE OF 50M OUTSIDE THE PERIPHERY OF THE AREA

SURFACE DRESSING OF GROUND INCLUDING REMOVING OF VEGETATION IN EQUALITIES NOT EXCEEDING 15CM DEPTH AND DISPOSAL OF RUBBISH LEAD UPTO 50M AND LIFT UPTO 1.5M

EARTTH WORK IN EXCAVATION BY MECHANICAL MEANS (HYDRAULIC EXCAVATOR)/ MANUAL MEANS OVER AREAS(EXCEEDING 30 CM IN DEPTH, 1.5M IN WIDTH ASA WELLL AS 10SQM ON PLAN) INCLUDING DISPOSED EARTH TO BE LEVELED AND NEATLY DRESSED INCLUDING PROVIDING BARRICADING, DANGER LIGHTING GUARD RAILING AS DIRECTED IN: A) ALL TYPES OF SOILS

EARTHWORK IN EXCAVATION BY MECHANICAL MEANS (HYDRAULIC EXCAVATOR)/ MANUAL MEANS IN FOUNDATION PIPELINE TRENCHES DRAINS (NOT EXCEEDING 1.5 M IN WIDTH AND SQM ON PLAN) INCLUDING DRESSING OF SIDES AND RAMMING OF BOTTOMS, LIFT UPTO 1.5M INCLUDING GETTONG OUT THE EXCAVATED SOIL AND DISPOSAL OF SURPLUS EXCAVATED SOIL WITHIN A LEAD OF 50M. A) ALL KINDS OF SOIL.

TRANSPORTATION AND CARRIAGE OF MATERIALS- By tipper truck including loading, unloading and stacking for earth upto 5kms

SUPPLYING AND FILLING IN PLINTH UNDER FLOORS, TRENCHES INCLUDING WATERING RAMMING CONSOLIDATION, DRESSING,COMPLETE. A) SAND

SUPPLYING AND FILLING IN PLINTH UNDER FLOORS, TRENCHES INCLUDING WATERING RAMMING CONSOLIDATION, DRESSING,COMPLETE. B) MOORUM

RUBBLE PACKING WITH HARD LATERITE STONE UNDER FLOORS UNDER FLOORS INCLUDING WATERING RAMMING AND CONSOLIDATING ETC. IN PIPELLINE TRENCHES AND OTHER FOUNDATIONS COMPLETE

LATERITE MASONRY IN NEATLY DRESSED STONES FOR 23CMS THICK MASONRY WALLS IN C.M. 1:4 (1CEMENT:4COARSE SAND) IN FOUNDATION UPTO PLINTH

LATERITE MASONRY IN ALL SIZES FROM FLOOR 1 LEVEL UPTO FLOOR V LEVEL

Providing and laying in position cement concrete 1:2:4 (1 cement : 2 coarse sand: 4 graded granitic or basaltic stone aggregate 40 m nominal size) excluding cost of centering, shuttering and finishing : a) All works upto plinth level

PROVIDING AND LAYING CEMENT CONCRETE 1:2:4 (1 CEMENT:2 COARSE SAND:4 GRADED GRANITIC OR BASALTIC STONE AGGRT.20MM.NOMINAL SIZE) B)IN RETAINING WALLS, RETURN WALLS (ANY THK) INCLUDING ATTACHED PILASTERS, COLUMNS, PUERS, ABUTMENTS, PILLARS, POSTS, STRUTS, BUTTRESSES, STRING OR LACING COURSES, PARAPETS, COPING BED BLOCKS, ANCHOR BLOCKS, PLAIN WINDOW SILLS, FILLETS ETC, UPTO FLOOR FIVE LEVEL.

PROVIDING AND LAYING IN POSITION (1:1.5:3) REINFORCED CEMENT CONCRETE EXCLUDING COST OF CENTERING ANS SHUTTERING, FINISHING AND REINFORCEMENT (1 CEMENT: 1.5 COARSE SAND:3 GRADED STONE AGGREGATE 20MM NOMINAL SIZE) C) IN BEAMS SUSPENDED FLOORS, ROOFS HAVING SLOPE UPTO 15 LANDINGS, BALCONIES , SHELVES, CHAJJAS , LINTELS, BAMDS, PLAIN WINDOE SILLS, STAIRCASES UPTO FIVE FLOOR LEVELS

Centering & shuttering including Strutting, Propping & removal of forms for : ii -Vertical surfaces such as retaing walls, return walls, Partitions, walls (any thickness) including attached Pilasters, Buttresses, Plinth and string courses, Fillets and the like

Centering & shuttering including Strutting, Propping & removal of forms for : v -Sides and Soffits of beams, Beam Haunchings, Cantilever, Girders, Bressumers and Lintels plinth beams exceeding 1m in depth

6045- Centering & shuttering including Strutting, Propping & removal of forms for : xiii Suspended floors, roofs landings, shelves & their supports

Centering & shuttering including Strutting, Propping & removal of forms for : viii - Arches, domes, vaults upto 6.00 span

PROVIDING TMT STEEL REINFORCEMENT BARS OF (SAIL,TATA,VIZAG,JSW STEEL LTD.)(CONFIRMING TO IS 1786 OF 1986) FOR RCC WORK (CONFIRMING TO IS 1786 OF 1986) INCLUDING BENDING, BINDING & PLACING IN POSITION IN ALL FLOORS ALONG WITH FACTORY MADE PRECAST CONCRETE COVER BLOCKS OF SPECIFIED SIZES WHOSE COMPRESSIVE STRENGTH IS NOT LESS THAN THAT OF SURROUNDING CONCRETE IN THE STRUCTURAL MEMBER

STEEL WORK IN BUILT UP TUBULAR (ROUND, SQUARE OR RECTANGULAR HOLLOW TUBES ETC.)(SQUARE HOLLOW SECTION(SHS)IS4923/(RHS)IS4923/ CIRCULAR HOLLOW SECTION (CHS) IS1161 CLOSED STRUCTURAL STEEL OF ( SAIL, TATA, VIZAG, JSW, APOLLO STEEL LTD.) MAKE (MIN YIELD STRESS 310MPA)), TRUSSES ETC. INCLUDING CUTTING, HOISTIMNG, FIXING IN POSITION AND APPLYING A PRIMIMG COAT OF APPROVED STEEL PRIMER, INCLUDIMNG WELDING AND BOLTED WITH SPECIAL SHAPED WASHERS ETC. COMPLETE.

Providing SS Welded Wire Mesh with 30 x 30mm hole made with 2.5mm wire to be installed on site as with support fo MS members, Welded to L angle sections as per direction of the engineer on site.

Providing and fixing G.I. chain link mesh 6.35cm x 6.35 cm x 10 gauge (2.5” x 2.5” x 10 gauge) fixed with angle iron posts and struts by G.I. or M.S. staples at 20cms apart with welding with the iron posts (placed at 3 meters centre to centre) including providing barbed wire stiffeners (shall weigh 9.33 kg. per 100 meters minimum) at top and bottom with barbed wire stiffers by binding wires at 50cms centre to centre complete as per the direction of the Engineer – in – charge (angle iron posts struts, earthwork and concrete for fencing posts and struts to be paid separately) (1.80M HEIGHT)

SUPPLYING AND FIXING ROLLING SHUTTERS OF APPROVED MAKE, MADE OF 80 X 1.25 MM M.S. LATHS INTERLOCKED TOGETHER THROUGH THEIR ENTIRE LENGTH AND JOINTED TOGETHER AT END BY END LOCKS MOUNTED ON SPECIALLY DESIGNED PIPE SHAFT WITH BRACKETS, SIDE GUIDES AND ARRANGEMENTS FOR INSIDE AND OUTSIDE LOCKING WITH PUSH AND PULL OPERATION COMPLETE INCLUDING COST OF PROVIDING AND FIXING NECESSARRY 27,5 CM LONG WIRE SPRINGS GRADE NO.2 AND M.S. TOP COBER OF 1.25MM THICK FOR FOLLING SHUTTERSTOP COVER ANS SPRING.

PROVIDING AND LAYING CRAZY PAVING ( AS PER DESIGN SHOWN IN DRAWING OR AS DIRECTED BY THE ENGINEER INCHARGE) WITH APPROVED QUALITY SHAHBAD TILE 20MM THICKNESS (UNPOLISHED ) OF SPECIFIED SIZES LAID ON 20MM THICK (AVERAGE) BED OF CEMENT MORTAR 1:5 (1CEMENT:5COARSE SAND) AS DIRECTED COMPLETED.

CUDDAPPAH STONE SLAB MACHINE CUT FLOORING OVER 20MM (AVERAGE) THICKNESS OF CEMENT MORTAR 1:4 (1CEMENT :4 COARSE SAND LAID OVER AND JOINTED WITH CEMENT SLURRY MIXED WITH PIGMENT TO MATCH THE SHADE OF THE SLB INCLUDING RUBBING AND POLISHING COMPLETE - 25MM THICK.

PROVIDING AND FIXING COLOURED CERAMIC TILES SPARTEK OR EQUIVALENT OF 8" X 8" AND 6 MM THICK IN SKIRTING AND DADOS ON 12MM THICK CEMENT PLASTER 1:3 91 CEMENT :3 COARSE SAND) AND JOINTED WITH CEMENT SLURRY COMPLETE.

PROVIDING AND FIXING ANTISKID TILES (320 X 320) AND 10MM THICK TILES IN FLOOR, TREADS OF STEPS, LANDING ON 25MM THICK BED OF CEMENT MORTAR 1:3 AND JOINTED WITH CEMENT SLURRY COMPLETE

Providing & laying of minimun 65mm thick factory made Shot blasted cement concrete Interlocking paver blocks of minimum M40 grade made by heavy duty block making machine with strong vibratory compaction and of approved size and design/ shape laid in 50mm thick compacted bed of coarse sand, filling the joints with coarse sand etc. all completed as per the direction of Engineer-incharge. The product should comply with IS 15658: 2006 and manufactured by ISO 9001: 2008 certified plant.

Providing & laying of minimun 65mm thick factory made Shot blasted cement concrete Interlocking paver blocks of minimum M40 grade made by heavy duty block making machine with strong vibratory compaction and of approved size and design/ shape laid in 50mm thick compacted bed of coarse sand, filling the joints with coarse sand etc. all completed as per the direction of Engineer-incharge. The product should comply with IS 15658: 2006 and manufactured by ISO 9001: 2008 certified plant.

PROVIDING AND LAYING 2ND CLASS MANGALORE TILE ROOF COVERING WITH 25 X 37 MM (1" X 1.5") JAMBA WOOD OR SIMILAR BATTEN INCLUDING NAILS ETC. BUT EXCLUDING RAFTERS

FINISHIING FINE WITH NEERU (3-5mm thk) OVER 12MM THK CEMENT PLASTER AS PER ENGINEER INCHARGE.

18MM CEMENT PLASTER IN TWO COATS UNDER LAYER 12MM THICK CEMENT PLASTER 1:5 (1 CEMENT: 5 COARSE SAND) AND TOP LAYER 6 MM THICK WITH CEMENT MORTAR 1:3 (1 CEMENT : 3 COARSE SAND ) FINISHED WITH SPONGE

PAINTING THREE OR MORE COATS WITH ACRYLLIC EXTERIOR PAINT OF APPROVED BRANDS SUCH AND MANUFACTURE (SUCH AS DULEX/ ASIAN PAINTS/ SHERWIN WILLIAMS) INCLUDING ONE COAT OF CEMENT PRIMER AND ONE COAT OF SURFACE TREATMENT ETC. COMPLETE.- TERRACOTTA FX PAINT FINISH AS PER CONSULTANT'S APPROVAL

Paints two coats on G. I. Sheet with superior quality ready mixed paint of approved brand and manufacture on new work to give an even shade.

SUPPLYING AND STACKING OF GOOD EARTH AT SITE INCLUDING ROYALTY AND CARRIAGE UPTO 1KM. (EARTH MEASURED IN STACKS WILL BE REDUCED BY 20% FOR PAYMENT).

SPREADING OF SLUDGE,DUNG MANURE OR/AND GOOD EARTH IN REQUIRED THICKNESS ( COST OF SLUDGE, DUNG MANURE OR/AND GOOD EARTH TO BE PAID SEPARATELY

PROVIDING AND PLACING ON TERRACE ROOF OF FLOOR TWO (1ST FLOORROOF SINGLE PIECE ROTATIONAL MOULDED POLYTHENE WATER STORAGE TANK HAVING ISI MARK AND CONFIRMING TI IS 12071:1996 (Capacity of Water Tank- 100L Capacity Each) (As per Engineer Incharge)

Supplying and fixing in position factory made Pre-cast RCC boundary stones confirming to IRC-25-1967 in concrete grade of M-20 with 20 mm nominal size granitic/basaltic aggregate compacted by means of mechanical vibrator in a smooth form of finish and 6mm dia bars in five no.s. stirrups and two number inverted 'U' size bars etc. complete

Providing of Pre-Cast cement concrete Raised Bullnose Kerb Stone of M-25 grade in white cement of size:600mm width x300 height x150 mm thick manufactured in wet press vacuum dewatering technology plant/ equivalent with face pimple finish for high visibility with excellent quality and finish and edges perfect and sharp. Make Basant Batons or equivalent (As Per Engineer Incharge)

Providing of Pre-Cast cement concrete Flushed Kerb Stone of M-25 grade in white cement of size:600mm width x300 height x150 mm thick manufactured in wet press vacuum dewatering technology plant/ equivalent with face pimple finish for high visibility with excellent quality and finish and edges perfect and sharp. Make Basant Batons or equivalent (As Per Engineer Incharge)

Providing and fixing of 6" X 6" Azulejo Wall Tiles Screen Printed (Colour and Pattern As Per Architects Approval ( 44.5 tiles per sqmt) (As Per Engineer Incharge)

Providing and laying of 15-20mm thk stoneconcrete, to rough plastered flooring surface. (Colour and pattern as approved by architect) (As Per Engineer Incharge)

Supply and Fixing of 25 MM EPDM: Providing & Laying of EPDM (Ethylene Propylene Diene Monomer) Safety & Sports total 25MM [ 19 MM SBR & 6 MM EPDM ] thick Rubber flooring systems comprising two layers with the top layer of 6mm being high quality EPDM granules and the bottom layer being 19 mm SBR. The granules shall be mixed on site with specially developed binders and trowelled by hand to specified thickness creating a seamless surface. The flooring system shall be hygienic, durable with high elasticity, all weather, resilient, non slip, high impact and easy maintenance EPDM. We have two types of EPDM granules , SR 5560 & SR 6065 for the sports and recreational market. The performance requirements and test methods for impact absorbing playground surfacing shall comply with SS 495:2001 or ASTM Standards. The supplier must have carried out in excess of at least 100 public park projects in India either by themselves or through their dealers or contractors. Pattern to be executed as per direction of the consultant. (As Per Engineer Incharge)

Supply, placing and grading of fine sand in given thickness in areas like sand pit, under crazy paving pathway etc on top of well compacted earth as per direction of the engineer incharge.

Supply, placing and grading of coarse sand in given thickness as per the site condition in specified areas like bioswale etc on top of well compacted earth as per direction of the engineer incharge.

Supply, placing and grading of 32mm basaltic aggregate in given thickness in specified areas like bioswale etc on top of well compacted earth as per direction of the engineer incharge.

Providing and fixing of precast cement concrete M25 grade flooring planks of size 1500 x 400 x 75 mm, pigmented with colour as per architects approval in broom finish as per direction of the incharge engineer.

Supply of laterite stone tiles od size (7 x 12)inches x 19 mm fixed with appropriate adhesive and coated with exterior finish coat as per direction of the engineer on site.

Designing and painting traditional designs using kaavi technique (etching) on top of neeru finish plaster with design, pattern and colour as per architects approval. (As Per Engineer Incharge)

Supply and laying of geotextile (6 to 8 mm thick) over compacted base of earth in specified locations like below sand pit as per the direction of the engineer in charge.

Providing & fixing Upvc Door Frame Yashashri make or equivalent made out of Upvc extruded multi cavity frame of 60 mm x 60mm x 2mm wall thickness. Frame is reinforced with G.I. Channel & welded in corners with Average weight 0.80 kg per running mtr. These frames are tested by using BS 2782 & DIN 53459 test methods.

Providing & fixing 20 mm door shutter Yashashri make or equivalent, made by using 20mm x 155mm x 1.2mm upvc multi-cavity section and boarder of 30mm x 40mm x 2.5mm Upvc multi cavity section. The corners are joined by inserting polymetric corners & hardware used for fixing the door shutter is stainless steel hinges & S. S. handle & S.S. tower bolt. The average weight of 20mm door shutter is 4.60kg per sq mtr. These Upvc sections are tested by using BS 2782 & DIN 53459 test methods.

Providing and fixing of aluminium window with 3 tracks and 2 shutters sliding window with tobular frame ployster powder if thicness 75-80 microns with approved standard accessaries such as ball beaing rollers, concealed lock, 6mm thick plain clear glass with EPDM beading etc.

Providing and fixing Eaves filler piece North light ventillater ( as per engineer incharge)

Conveying carefully from stack at site, 250m from both sides rolling and lowering in trenches, laying true to line and level and perfect linking for joints for P.V.C / H.D.P.E complete in all respects as per the direction of the engineer in-charge H)200 mm OD

Supplying, of HDPE pipes at store or site of work including loading, unloading, stacking, transit insurance etc. complete bearing ISI mark &conforming to IS: 4984-1995 & made from PE 100 resin Class IV (6 kg/cm2). J) 200 mm dia

Proving and fixing white vitreous china water closet squating (European type w.c. pan) with seat and lid, C.P. brass hinges and rubber buffers 10 lts. High level P.V.C.. flushing cistern (of approved make ) with fittings, rack bolts 32 mm diameter P.V.C. telescopic flush pipe with fit tings and clamps 25mm P.V.C.. over flow pipe with specials & mosquito proof coupling of approved municipal design and nylon. chain and pull complete, cutting and making good the walls ad floors where required.

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430 x 260 x 350 mm and 340 x 430 x 265 mm sizes respectively with pvc automatic flushing cistern with fittings, R.S. or C.I. brackets, standard size galvanised steel flush pipe and spreaders with brass unions & G.I. clamps complete, including painting of cister and fittings, cutting and making good the walls and floors where required. C) Range of three urinal basins with 10 litres pvc. automatic flushing cistern .

Providing and fixing vitreous china wash basin with RS or C.I. brackets painted white, 15 mm C.P. brass pillar taps C.P. brass chain with rubber plug 32 mm C.P. brass waste of pattern, 32 mm diameter M.I. or C.P. brass trap and union complete, including cutting and making good the walls where required. D) Flat back wash basin size 550 x 400mm with a single 15 mm C.P. brass pillar taps.

Providing and fixing Marble(blue or black veins) as per directions of engineer in charge.

Providing and fixing chlorinated ployvinyl chloride (CPVC) pipes confirming to IS:15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of the Engineer-incharge. Internal work exposed on wall (Medium duty SDR 13.5 pipe). B)20 mm outer dia CPVC pipe

Providing and fixing ASTM UPVC pipe, conforming to ASTM 2467 with ISO 14001, including all UPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step UPVC solvent cement and testing of joints complete as per direction of Engineer. Internal work - Exposed on wall. C)32mm outer dia.

Providing and fixing in position S.C.I trap(nahni) 100 mm x 50 mm ( as per direction of enginneer in charge)

Providing and fixing square-mouth S.W. gully trap grade ‘A’ complete with c.i. grating brick masonry chamber and water tight C.I. cover with frame of 300 x 300 mm size (inside the weight of cover to be not less than 4.53 kg). And frame to be not less than 2.72 kg as per standard design : B)150 x 100 mm size –P or S type

Providing and fixing ASTM UPVC pipe, conforming to ASTM 2467 with ISO 14001, including all UPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step UPVC solvent cement and testing of joints complete as per direction of Engineer. Internal work - Exposed on wall. G)75mm outer dia.

Providing and fixing ASTM UPVC pipe, conforming to ASTM 2467 with ISO 14001, including all UPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step UPVC solvent cement and testing of joints complete as per direction of Engineer. Internal work - Exposed on wall. I)110mm outer dia.

Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc.with hairline finish, including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer, ( for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).

Providing and fixing NICKEL chrome plated copper alloy Fancy concealed stop cock with sheet flance 20mm Jaquar make or equivalent. Confirming to IS 8931;1993

Providing and fixing NICKEL chrome plated copper alloy Fancy BIB Cock Short Body Jaquar make or equivalent. Confirming to IS 8931;1993

Providing and fixing NICKEL chrome plated copper alloy Fancy BIB Cock Short Body Jaquar make or equivalent. Confirming to IS 8931;1993

Providing and fixing rigid PVC bend (approved make ) for S.W.R. pipes including lubricating etc complete bend with door : A)100 mm dia

Providing and fixing single Tee of rigid PVC (approved make ) for S.W.R. pipes including lubricating etc complete, with door : A) 110mm dia

Providing, fixing and installation of Rotary type tube well of well depth upto 50mts, 400mm diameter with PVC type casing (Casing Diameter 160mm) including drilling, riming, jointing, gravel packing etc. (As per engineer Incharge) (Note: Payment for works subject to extraction of water from borewell and as confirmed by engineer on site. All requisite permissions from concerned departments to be obtained by the contractor on-board).

DRILLING 12 INCH

RIMING 14 INCH

RIMING 16 INCH

160 MM PVC CASING CLASS IV , 8 KGF/CM2 MAKE:SANJIVANI

CASING LOWERING

COLLAR AND JOINTING

PERFORATION

RIG MOBILISATION

FLUSHING AND YIELD DEVELOPMENT

SUPPLY OF GRAVEL PACKING

GRAVEL PACKING

DRILLING MUD

WATER FOR DRILLING

An elastomeric, cementitious, waterproof coating for concrete and masonry. Providing and applying on a well prepared vertical surface Masterseal 550EL of BASF make or equivalent elastomeric flexible, two component polymers modified cementitious composite system that requires no addition of water at the site. The product shall be applied in minimum two coats to achieve total DFT of 1mm. The material shall be mixed and applied fully in accordance with the manufacturer's instructions. The product shall exhibit at least 40% elongation at ambient & 30% elongation in under water condition with tensile strength greater then 20 Kg/cm2. The product shall resist 1.5 bars pressure when tested as per DIN 1048 at 2mm DFT. When applied at 2mm DFT, elastomeric coating shall be able to bridge crack up to 0.5mm width. All scaffolding, ladders, supporting materials etc. complete. Rates shall be inclusive of all labour, materials, tools and plant etc. complete.

15525- Supplying of centrifugal pump of following capacity at the site of work including loading unloading excluding taxes, freight, loading & etc. complete. 5- Three Phase Monoblock Pump Sets of SYNC speed as 3000 RPM of 3.0HP

Providing and fixing of 160mm DWC Perforated Pipe with Filter Cloth, complete with all necessary fixtures and joints. The pipe to be resistant to corrosion, installed to facilitate proper drainage and filtration, with the filter cloth placed around the pipe to prevent clogging by surrounding soil. All fixtures, joints, and connections to be secure and installed in compliance with industry standards and as per incharge engineer.

Providing and fixing of 110mm DWC Perforated Pipe with Filter Cloth, complete with all necessary fixtures and joints. The pipe to be resistant to corrosion, installed to facilitate proper drainage and filtration, with the filter cloth placed around the pipe to prevent clogging by surrounding soil. All fixtures, joints, and connections to be secure and installed in compliance with industry standards and as per incharge engineer.

LAYING AND FIXING WITH COLLARS LIGHT DUTY NON-PRESSURE NP2 CLASS R.C.C. PIPES WITH CEMENT MORTAR IN PROPORTION 1:2 (1 CEMENT :2 FINE SAND) IN JOINTS INCLUDING COST OF JOINTING MATERIALS ETC. COMPLETE.

Providing, laying,fixing of multipurpose play court with asphalt base, saucer drain, peripheral nylon fencing with MS structural members finished with acrylic system and installed with required equipments as per direction of the consultant. (As Per Engineer Incharge)

ASPHALT BASE with including Dressing the surface to create slope of 0.8% as per site condition drain outlet, Compaction of Sub Base with 8-10 tonne roller, 03- Weedicide Spraying on the total area, Providing and laying of WMM in one layer as per specifications. Compaction to be done with a 8/10 tonne Roller (thickness in mm), 05- Emulsion to be mixed with water and spread on the finished WMM surface, 06- Bituminous Macadam (BM): Providing & Laying of 20mm stones & down mixed with 2.5% of Bitumen of approved grade. Compaction to be done with a 8/10 tonne Roller (thickness in mm), Providing & Laying of 6mm stones & down mixed with 3% of Bitumen of approved grade. Compaction to be done with a 8/10 tonne Roller (thickness in mm), Bitumen mixed with dust to be spread to cover all the voids if required. (As Per Engineer Incharge) with a warranty period of 2 years. (As Per Engineer Incharge)

Saucer Drain with Covers: Providing & Laying saucer drain with covers with PCC covers as per drawing and discussion with the Engineers & maintaining slope inside the drain as per site conditions (measurements as per drawing shared and as explained by Engineer on site) with a warranty period of 2 years. (As Per Engineer Incharge)

Providing and Laying of Fencing: Chainlink Surrounding the court from all sides. 3m in height to restrict access to people entering the basketball court from the sides supported by 50x50mm MS Poles, and 40x40mm MS Horizontal Members with a warranty period of 2 years. (As Per Engineer Incharge)

Providing and Laying of Synthetic Acrylic System (red and blue in colour) with a warranty period of 2 years. (As Per Engineer Incharge)

Equipments: Supply of one set of movable basketball poles of 2.2 mtr extension, ring and board as per standard with a warranty period of 2 years. (As Per Engineer Incharge)

Equipments: Supply of one set of movable volleyball posts and nets as per standard with a warranty period of 2 years. (As Per Engineer Incharge)

Providing and Laying of Fencing: Nylon Surrounding the court from all sides. 3m in height to restrict access to people entering the basketball court from the sides supported by 50x50mm MS Poles, and 40x40mm MS Horizontal Members with a warranty period of 2 years. (As Per Engineer Incharge)

Providing transporting and installing of Play Equipment INCLUDIING: CLIMBING PEGS,MOUND ROPE CLIMBER-3,900MM SINGLE MOUND SLIDE,DUCK RIDER,PUPPY DOG RIDER,HORSE RIDER,1200MM SINGLE MOUND SLIDE,CLIMBING TOWER NET,MONTERO-E,FLOWER PODS,S BALANCE BEAM,LUMBERJACK LOGROLLER-E,SEE SAW FOUR SEATER-E,KPS- 0A0414- (Installation to be done as per direction of the consultant) with a structure warranty period of 1 year. The equipment to be transported and installed on site following required safety. (As Per Engineer Incharge)

CLIMBING PEGS - The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. " The indoor products are all in rotomoulded LLDPE Virgin plastics The soft play are made of children-friendly foam and soft yet durable PVC with a structure warranty period of 1 year. The equipment to be transported and installed on site following required safety. (As Per Engineer Incharge)

Supply and Fixing of 900MM SINGLE MOUND SLIDE : " The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. " All components designed and manufactured to meet with EN 1176 safety standards. The EN 1176 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only. The Equipment comprises of 2 numbers of support are to be schedule HOT DIP Galvanized steel with a 114mm ODThe finished products have the following typical characteristics: 0.5mm thickness, oven cured between 191oC and220oC, to achieve Flexibility, Impact, Salt Spray {Corrosion} Resistance, Hardness, and Adhesion.All post caps are to be cast from aluminum which is pretreated, cured and sandblasted, 114mm.Bolts, nuts, screws, washers and etc used for assembly shall be stainless steel 304 of tamper resistant stainless steel. Exposed hardware shall be covered withsafety caps as per EN1176 standards as a safety.All Joints are Robotic Welded. EMBANKMENT SLIDE DIMENSIONS: 1.73 m x 0.93 m x 2.1 m with a structure warranty period of 1 year. The equipment to be transported and installed on site following required safety. (As Per Engineer Incharge)

Supply and Fixing of CLIMBING TOWER NET: " The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. " All components designed and manufactured to meet with EN 1176 safety standards. The EN 1176 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only. Upright structural posts of height 3.1 m are to be schedule HOT DIP Galvanized steel with a 114 mm OD and 2.2mm (wall) thickness of the tubing. The poles are welded on to a base plate made from steel with 114mm inner diameter. The equipment comprises of a single upright steel pipe and Interconnected Ropes which are connected like WEB using the rope connector. The steel pipe is of size Dia 114 mm and thickness of 2 mm and Ropes of Dia 16 mm , Plastic Components [super thick plastic] shall be animated and shall be rotationally molded from antistatic, copolymer, virgin linear low density UV stabilized polyethylene, with color molded in and minimum thickness of 6 - 8mm. Bolts, nuts, screws, washers and etc used for assembly shall be stainless steel 304 of tamper resistant stainless steel. Exposed hardware shall be covered with safety caps as a safety. All joints are Robotic welded. PLAY EQUIPMENT DIMENSIONS: 4.84 m x 3.40 m x 3.1 m with a structure warranty period of 1 year. The equipment to be transported and installed on site following required safety.(As Per Engineer Incharge)

Supply and Fixing of Multiplay Equipment (Montero- E) : " The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. " All products must be tested and certified to meet EN 1176 safety standards. The EN 1176 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only.This equipment has 13 numbers of Upright structural posts of different heights, such as 4 numbers of 1.6 m height, 3 numbers of 1.88 m height, 2 numbers of 2.0 m height and 4 numbers of 2.7 m height.5 numbers of Decks of size 1.14 x 1.14m are fabricated from 2mm perforated solid punched steel. Deck perimeter is precision pre punched for attachments. Decks are pressed, punched, and welded sand blasted and vinyl plastic coated to a thickness of 4mm.DECK, STEP PLATFORM, STAIRS, BAFFLE: Shall be an all- ROBOTIC welded assembly fabricated from 2mm perforated solid punched steel. Deck perimeter is precision pre punched for attachments. Decks are pressed, punched, and welded; sand blasted, powder coated to 2.2mm thickness or vinyl plastic coated to a thickness of 4mm.Sun Roof of size 2.05 m x 2.05 m x 0.8 m, Double Slide of size 1.92 m x 1.33m x 0.9 m, Tunnel of size1.65m x 1.60m, Number Panel, 3 numbers of Vertical Panel, 2 numbers of window panel, 1 number of gear panel.Bolts, nuts, screws, washers and etc used for assembly shall be stainless steel 304 of tamper resistant stainless steel. Exposed hardware shall be All joints are Robotic welded. PLAY EQUIPMENT DIMENSIONS: 4.46m x 3.95m x 3.80m with a structure warranty period of 1 year. The equipment to be transported and installed on site following required safety. (As Per Engineer Incharge)

Supply and Fixing of 4 Seater See Saw: " The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. "All products must be tested and certified to meet EN 1176 safety standards. The EN 1176 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only. The EN 1176 certificates must be in the name of a supplier who has carried out in excess of at least 100 public park projects in India either by themselves or through their dealers or contractors. These EN 1176 certificates must be clearly displayed on the notified certifying bodies websites as online verification is mandatory. The See Saw consists of 2 poles of Dia 114mm and thickness of 2.5mm which balances the horizontal rod at the center which is of size 3110 mm length and Dia 114 mm. It consists of 4 seats which is made of LLDPE virgin plastic of size 305mm X 213 mm X 125 mm. All Joints are Robotic Welded. PLAY EQUIPMENT DIMENSIONS: 3.10 m x 0.44 m x 0.80 m with a structure warranty period of 1 year. The equipment to be transported and installed on site following required safety.(As Per Engineer Incharge)

Supply and Fixing of Multiplay Swing Equipment (KPS - 0A0414 ): " The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. " All products must be tested and certified to meet EN 1176 safety standards. The EN 1176 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only.Upright structural posts of height 2.10 m are to be schedule HOT DIP Galvanized steel with a 114mm OD and 2.2mm (wall) thickness of the tubing.Toprail at height 2.10 m and Dia 114 mm shall be an all-robotic welded unit, fabricated from 114 O.D. galvanized steel pipes.Snake Climber of size 0.67 m x 2.04 m with thickness of Dia 48 mm, Rope climber of size 2.26 m x 1.78 m withthickness of Dia 48mm, Ring trek of ring thickness Dia 19mm are all robotic welded fabricated from 32 O.D.galvanized steel pipes for the outer pipes and 25mm O.D.Plastic Components such as swing seats [super thick plastic], Stepping disc connected to the high tensile steelfiber rope shall be animated and shall be rotationally molded from antistatic, copolymer, virgin linear lowdensity UV stabilized polyethylene, with color molded in and minimum thickness of 6 - 8mm.Bolts, nuts, screws, washers and etc used for assembly shall be stainless steel 304 of tamper resistant stainless steel. Exposed hardware shall be covered with All joints are Robotic welded. PLAY EQUIPMENT DIMENSIONS: 12.86 m x 2.84 m x 2.10 m with a structure warranty period of 1 year. The equipment to be transported and installed on site following required safety.(As Per Engineer Incharge)

14126- Retro- reflectorised Traffic signs (Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 2012 made of high intensity Grade sheeting using ASTM sheeting "C' type XI micro prismatic retro reflective material vide clause 801.3, fixed over aluminium sheeting, 2 mm thick with area not exceeding 0.9 sqm supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing)etc complete as per MORT &H Specifications Fifth Edition. A 10 years warranty for Retro Reflective Sheeting from the original sheeting manufacturer & a certified copy of three years outdoor exposure report from an independent test lab for the product offered shall be submitted by the contractor. 60 cm circular

Supply and Installation of 18-inch high sculpture signage with mild steel (MS) framing and LED backlighting, designed and installed per the consultant’s direction. The MS letters to be finished for durability and equipped with backlighting system for visibility. The signage to be securely mounted, with electrical wiring installed to safety standards. The contractor to ensure proper testing, commissioning, and provide a 1-year warranty on materials and workmanship. (As Per Engineer Incharge)

Supply and installation of a combination of 4 piece precast grates in m-30 grade-of overall size of 1.5x1.5x0.10m concrete with design as per architects approval. (As Per Engineer Incharge)

Supply and installation of precast walls in m-30 greade concrete with curves of size 2x1x0.5m properly finished. Unique wall profile to be as per architects approval.(As Per Engineer Incharge)

Supply and installation of precast seats in m-30 grade concrete finished with clean sharp edges of size 1.2 x 0.45 x 0.5m. .(As Per Engineer Incharge)

Supply and planting of tree/ palms sapling: The tree sapling shall be healthy, vigorous specimen, well shaped, properly branched and well established, of the height specified. The tree sapling shall be planted in the positions demarcated, supporting it with a straight stout stake of bamboo, watered etc. (As Per Engineer Incharge)

GULMOHAR

INDIAN ELM

COPPERROD TREE

INDIAN SHIRISH TREE

AMAITASH

BHENDI GAJADANDA

BIBHITAKI

KACHNAAR

TAMARIND TREE

GINGER TREE

CHAMPAK

BANYAN TREE

Supply and planting of shrubs: The shrubs shall be healthy, vigorous specimens, well shaped, heavily branched (wherever applicable), densely foliated,well established and of specified height. The planting of shrub sapling shall be done in positions demarcated, with bamboo supports wherever necessary, watering etc. (As Per Engineer Incharge)

SCARLET SAGE

FALSE BIRDS OF PARADISE

PARAKEET

INDIAN SHOT

KANEIR

NIGHT JASMINE

UMBRELLA PALM

DWARF UMBRELLA TREE

TEXAS SAGE

BEACH SPIDER LILY

WHITE LILY TURF

ARROWHEAD PLANT

EAST INDIAN LEMONGRASS

CREEPING DAISY

Supply and planting of ground cover: Mexican Lawn- Laying of Lawn on top of garden soil, in the given location with watering etc.

Maintainence of all hardscape, softscape and built areas of the park including cleaning of hardscape areas, gardening of softscape areas, painting as required, pumhouse operation on a daily basis, sweeping and picking of leaves, security and required maintainence tools

Designing 'Supply and installation of Decorative pole made in galvanised gi pipe in 2 section of size bottom 100mm-80mm dully powder coated in black colour of 6 mts height with design at bottom and section painted in golden clolur ,completly with Foundation Bolt & in built cable terminal Junction Box pole with Heavy base plate and Stiffener support for sturdiness.suitable for post top fitting including arm

Supplying and erecting integrated LED round burial light 6W IP65 & IK10 class having pressure die-cast housing, having system lumens output of Min. 500 Lumens, min. efficacy of 85 lumen/W, CRI>80, CCT upto 6500K, THD<10%, p.f. >0.90, operating range of 100-240V, inbuilt surge protection of 2 kV, Life class of 50,000 Hrs at L50B50 , slat spray tested for 500 Hrs. including making of recess of appropriate size for flushing into surface with minimum 2 Year warranty as per specification No FG-ODF/PT.

Supplying and erecting integrated LED flood light fitting Max. 155W IP65 & IK07 class having pressure die-cast aluminium housing, having system lumens output of Min. 18600 Lumens, min. efficacy of 120 lumen/W, CRI>70, CCT upto 6500K, THD<10%, p.f. >0.90, operating range of 140-270V, inbuilt surge protection of 4 kV, Life class of 50,000 Hrs at L70B50 including driver with U shaped bracket with minimum 2 Years warranty as per specification No. FG?ODF/FL.

Supplying and erecting integrated LED Post Top 45W IP65 & IK10 class having die cast aluminium housing with UV protected polycarbonate diffuser, having system lumens output of Min.4500 Lumens, min. efficacy of 105 lumen/W, CRI>80, CCT upto 6500K, THD<10%, p.f. >0.90, operating range of 140-240V, inbuilt surge protection of 2 kV, Life class of 30,000 Hrs at L50B50 , including driver complete with minimum 2 Year warranty as per specification No FG-ODF/PT.

Supply and installation of Decorative pole made in galvanised square tube pipe in 2 section of size 100mm-80mm and dullypowder coated in black colour of 3 mts height with ,completly with Foundation Bolt & in built cable terminal Junction Box pole with Heavy base plate and Stiffener support for sturdiness.suitable for post top fitting

Supplying and erecting integrated LED Bollard Cylindrical / Cubical shaped 800mm 8W IP65 & IK10 class having extrusion aluminium housing with polycarbonate diffuser, having system lumens output of Min. 800 Lumens, min. efficacy of 100 lumen/W, CRI>80, CCT upto 6500K, THD<10%, p.f. >0.90, operating range of 140-240V, inbuilt surge protection of 2 kV, Life class of 25,000 Hrs. at L50B50, including driver complete with minimum 2 Year warranty as per specification No FG-ODF/BL.

Designing ,Supplying and erecting LED Strip light Max. 45 W IP65 class having minimum lumens output of 800 Lumens/m, min. efficacy of 90 lumen/W, CRI>80, CCT upto 5000K, Beam Angle of 110 deg., THD<10%, p.f. >0.95, operating range of 230-270V, Life class of 30,000 Hrs at L70B50 including driver, diffuser,aluminuim housing suitable with minimum 2 year warranty as per specification No. FG-IDF/LED.

Supplying and erecting LED square / circular Max. 14 W down lighter / Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 1500 Lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs at L70B50 including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with minimum 2 years warranty as per specification No. FG-IDF/LED.

Supply and erecting of 48 inch (1200mm sweep) ceiling fan, double ball bearing type, , complete with all accessories. (a) Cat A

Supply and erecting of 9 inch (225 mm sweep) exhaust fan with double ball bearings, 1400 rpm, complete with all accessories(a) Cat A.

Supplying and erecting Concealed type foot/step light Max. 5W having IP67, IK10 rated Pressure die cast housing having system lumens output of Min. 500 Lumens, min. efficacy of 100 lumen/W, CRI>80, CCT upto 5000K, Beam Angle of 110 deg., THD<10%, SDCM<5, p.f. >0.95, operating range of 230-270V, surge protection of 2.5 kV, Life class of 25,000 Hrs at L70B50, including driver by making necessary arrangement / recess in wall to make it flush with surface with minimum 2 Year warranty.

Supplying and erecting CANOPY light Max. 12W having IP67, IK10 rated Pressure die cast housing having system lumens output of Min. 500 Lumens, min. efficacy of 100 lumen/W, CRI>80, CCT upto 5000K, Beam Angle of 110 deg., THD<10%, SDCM<5, p.f. >0.95, operating range of 230-270V, surge protection of 2.5 kV, Life class of 25,000 Hrs at L70B50, including driver by making necessary arrangement / recess in wall to make it flush with surface with minimum 2 Year warranty.

Supply of 2 core armoured PVC/XLPE insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size.2 Core 2.5 sq.mm

Supply of 4 core armoured PVC/XLPE insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. 4 Core 4 sq.mm

Supply of 4 core armoured PVC/XLPE insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. 4 Core 50 sq.mm

Supply of 3 core unarmoured PVC/XLPE insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size.3 Core 2.5 sq.mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm in the existing RCC/HUME/STONEWARE Metal pipe, etc. complete as required.

Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm in the existing masonry open duct, etc. complete as required

Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm on surface, etc. complete as required

Laying of one number additional PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm direct in ground in the same trench in one tier horizontal formation including excavation in the form of a trench as per Cable Trench Drawing provided by the Engineer-Incharge,sand cushioning with screened sand bed of 20mm thick , protective covering with bricks placed breadth-wise on top of cable all over the run( the brick protection shall cover the cable and project atleast 5 cms over the sides of the cable) and backfilling the excavated earth without stones or hard material and making the surface proper with 15 cm crown on the top complete as required.(a) In soily strata

Laying of one number additional PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size exceeding 25 sq.mm but not exceeding 120 sq.mm direct in ground in the same trench in one tier horizontal formaion including excavation in the form of a trench as per Cable Trench Drawing provided by the Engineer-Incharge,sand cushioning with screened sand bed of 20mm thick , protective covering with bricks placed breadth-wise on top of cable all over the run( the brick protection shall cover the cable and project atleast 5 cms over the sides of the cable) and backfilling the excavated earth without stones or hard material and making the surface proper with 15 cm crown on the top complete as required.(a) In soily strata

Supply and making cable end terminations with compression gland and copper lugs for following sizes of PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required..2 Core 2.5 sq.mm

Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 4 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required.. 4 Core 4 sq.mm

Supplying and making cable end terminations with brass compression gland and aluminium lugs for folowing sizes of 4 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required. 4 Core 50 sq.mm

Supplying and laying (including excavation of suitable width & depth up to 90 cm) 50 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete.

Termination of pole along with all necessary connector,termination material,mcb of suitable rating etc as required

Earthing with GI earth pipe 2 mts long 40 mm dia medium class with ISI mark,of approved brands, including accessories and providing masonry enclosure with CI/RCC cover having locking /lifting arrangement and watering pipe etc. with charcoal or coke and salt) as required as per the Earthing Drawing provided by the Engineer-Incharge.The scope of work includes the following: a) Excavation of pit of size 1.0x1.0x 2.0 mtrs(min) and disposal of excavated soil. b) Class B GI pipe, 40mm diameter as per specifications. c) Charcoal/salt as per specs ( paid seperately). d) Refilling the pit of size 1.0x1.0x 2.0 mtrs(min) with soft black soil of minimum resistivity i/c transportation. e)Masonary chamber with proper foundation, cover plate and locking arrangement. f) Testing of earth value with earth megger and certifications of its value. Aluminium tag with embossed earthing value to be attached to the pipe. g)watering arrangement(plumbing will be paid seperately).

Providing and fixing 25 mm x 5 mm GI strip on surface or in recess for coneections etc. as required

Supplying and laying 8 SWG copper wire at 0.5 m below ground level for conductor earth electrode including soldering etc. as required

Extra for using salt and charcoal for GI or copper plate earth electrode as required( 96 Kgs of Charcoal and 5 Kgs of Salt)

DESIGN 'Fabrication , Supply , Installation , Testing and Commissioning Of Outdoor feeder pillar panel made out of 14 Swg CRCA sheet , Degreased , derusted and painted with two coats of red oxide primer and two coats of Siemens grey epoxy paint and conforming to IP 54 class of protection . The panel shall be suitable for three phase 415V , 50 Hz. , four wire AC system and shall comprise of the following : 'INCOMER'100 amps 4pole,36 KA MCCB, with neutral contactor,ON / OFF / TRIP indicating lights with control MCB’s.'Set1'RYB Lamp Mcb 'Set1'BUSBAR '160 amps ,415 V TPN 50 Hz Aluminium bus bars with heat shrinkable insulation sleeve.'Set 20 'OUTGOING '16 A SINGLE Pole MCB ,36KA 'Set 1'63 amps 4 pole MCB ,36 KA'Set 8 ,'25 amps 4 pole MCB , 36 KA '

DESIGN 'Fabrication , Supply , Installation , Testing and Commissioning Of METERING panel made out of 14 Swg CRCA sheet , Degreased , derusted and painted with two coats of red oxide primer and two coats of Siemens grey epoxy paint and conforming to IP 54 class of protection . The panel shall be suitable for three phase 415V , 50 Hz. , four wire AC system and shall comprise of the following : 'INCOMER'100 amps 4pole,36 KA MCCB, with neutral contactor,ON / OFF / TRIP indicating lights with control MCB’s.'Set1'RYB Lamp Mcb 'Set1'BUSBAR '160 amps ,415 V TPN 50 Hz Aluminium bus bars with heat shrinkable insulation sleeve.'Set 14 'OUTGOING '16 A SINGLE Pole MCB along with single pahse meter arrangement with celling provision

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in recessed PVC conduit(heavy) with modular switch, modular plates, suitable size modular GI box of specified Category and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.(c) Group C -- with Cat A Modular Accessories

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable in the independent recessed PVC cond(b) 2 x 2.5 sq.mm + 1 x 2.5 sq.mm earthwire (20mm Conduit)uit(heavy) of appropriate size as required.

Supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required

Supplying and fixing following size modular GI box alongwith modular base and cover plate for modulator switches in recess etc. as required(c) 6 Module (200mm x 75 mm) Cat A

Supplying and fixing following modular switch/ socket on the existing modular plate and switch box including connections but excluding modular plate etc. as required(c) 15/16 A switch Cat A

Supplying and fixing following modular switch/ socket on the existing modular plate and switch box including connections but excluding modular plate etc. as required(e) 6 pin 15/16 A socket outlet Cat A

Supplying and fixing following way SPN sheet steel MCB distribution board 240 V on surface/ recess complete with tinned copper busbar neutral busbar earth bar dinnbar detachable gland plate interconnections phosphotized and powder painted including earthing etc. as required (but without MCB/RCCB/Isolator)(f) 8 way double door Cat A

Supplying and fixing 6 A to 32 A, C series MCB suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required.(a) SP, Cat A

Supplying and fixing 6 A to 32 A, C series MCB suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required.'(c) DP, Cat A

Supplying and fixing 40 A, C series MCB suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required.(b) SPN, Cat A

Supplying and fixing 12U wall mount rack (Dimension-DxWxH – 500x550x613 (mm) as per specification no. WG-NAS/RAK

Supplying & erecting 8 TB internal Surveillance HDD suitable for SATA Port of NVR, interface transfer rate 6 GB/S, maximum sustained transfer rate 210 MB/Sec to 213 MB/S. Drive bay supported 08+, Cameras supported up to 64, Cache (MB) 256, Load/Unload Cycle -3000000, Work Load Rating per Year 180TB, MTBF 1000000 Hrs. HTTPS. RoHS, UL, CE certified, duly erected in position in provided NVR as per specification no. CCTV-HDD

Supplying, installing, testing & commissioning of 32/40 Ch Network Video Recorder (NVR), suitable connect Min. 32 IP Cameras, up to 5 Megapixel Resolution, with HDMI1/VGA1 outputs, provided Atleast one HDMI output of 4K resolution, atleast one VGA output with output up to 1920x1080, Support H.265 or higher, H.264, MJPEG, Supports Redundant Dual Power, Incoming Bandwidth 320 Mbps with minimum 8 SATA ports, ANR Technology,8 SATA interfaces for 8 HDDs and capacity of each HDD up to 8TB, minimum 02 USB port, Alarm I/O 16/4, RJ-45 10/100/ 1000 Mbps self?adaptive Ethernet interface, support multibrand network Cameras, ONVIF conformance, Multiple network monitoring: Web viewer . support protocol TCP/IP, DHCP, DNS, DDNS, NTP, SADP, SMTP, NFS, iSCSI, UPnP™, HTTPS. RoHS, UL, CE, FCC certified. duly erected in provided U Rack with wiring connections, tagging and programming etc. complete as per specifications no. CCTV-NVR

Supplying & erecting of High definition 4/5 Megapixel IP IR Bullet Camera with following features Image Sensor : minimum 1/2.8" Progressive Scan CMOS, Video Resolution : minimum 2592 x 1520 Video Compression : H.264, H.265 or higher, at least Three individually configurable stream, Frame rate : minimum 25 fps at all resolutions, WDR : minimum 120 dB Wide Dynamic Range, ONVIF profile conformant, minimum IR distance : 50m, Lens Type : 2.8/4/6 mm Lens, fixed focal, Field of View :2.8 mm, horizontal FOV 107°, vertical FOV 57°, diagonal FOV 129° 4 mm, horizontal FOV 86°, vertical FOV 47°, diagonal FOV 102° 6 mm, horizontal FOV 55°, vertical FOV 29°, diagonal FOV 65° Lux sensitivity - minimum 0.2 Lux at color, minimum 0.05 Lux at Black & White, 0.0 Lux (IR) Night Vision Distance minimum IR - 50m. Camera minimum Adjustment Angles - Pan : 350°, Tilt : 72°, Rotate : 350°. Power Supply : Support 12VDC & PoE, IP67, IK10 - Vandal Resistant. Built in micro SD/SDHC/SDXC card slot of minimum 128 GB, Built in microphone. minimum Input/Output - Audio in × 1, Audio Out × 1, Alarm in × 1, Alarm Out × 1. Image Settings : Rotate mode, saturation, brightness, contrast, sharpness, gain, white balance. Image Enhancements : Day/Night-Auto (ICR)/Color/Black & White, 3D DigitalNoise Reduction, Automatic White Balance, Automatic Gain Control, Backlight Compensation, Highlight Compensation.Events : Privacy Masking, Motion detection, Scene change detection, Face capture, Video tampering, audio exception detection, Region entrance detection, Region exiting detection. Operating temperature ( -30 to 60° C ) . Security - User account and password protection, HTTPS, IP filter, IEEE 802.1X, digest authentication, user access log, TLS1.2, AES - 256, SSH/Telnet closed,FTP disabled. Protocol - DHCP, UDP, HTTP, HTTPS, NTP, DNS, RTP, RTSP, SMTP, SSL/TLS, TCP/IP, Secure Real-Time Transport Protocol (SRTP), Bonjour, SNMP and Secure shell (SSH) supported protocol. RoHS, WEEE, ISO-14001 and REACH compliant, UL/EN OR equivalent BIS/TECH/STQC or any indian standards as applicable, CE, FCC certified. duly erected in position on wall/ceiling/false ceiling/provided pole (mounting height not more than 5 meter) etc with all accessories etc complete as per specification no. CCTV-CAM

Supplying, fixing, and configuring 8-port 10/100M un-managed,10/100/1000 base-T, gigabit switch compliant with IEEE 802.3 standards as per specification complete.

Supplying and fixing tool-less IO (ethernet) flush/surface type in provided modular box as per specification no. WG-NAS/IO

Supplying & erecting 43" professional LED display with 1920*1080 (Full HD) Display, suitable for 16/32 channel NVR and following features Brightness: minimum 500 Cd/m2 Contrast Ratio: minimum 1000:1 Viewing angle: 178/178 deg. Response time: maximum 8 ms Inputs: HDMI, VGA, BNC,USB, Audio In, Built-in speakers maximum 10 W, Suitable to operate on 100-240 V 50 Hz AC supply and 24/7 Duty Cycle duly erected on wall or table top with standard accessories like wall mount stand and wiring connections etc. complete as per specifications no. CCTV-MON

Supplying, fixing, and configuring 48 ports managed gigabit switch 10/100/1000 Mbps + 4SFP+ ports & 2X10G RJ-45 ports compliant with IEEE 802.3 af/at standards & supports OSPF/policy based routing/stacking erected in provided rack complete

Supplying, installing and testing UTP connector (RJ-45) as per specification no. WG-NAS/UTPC.

Supplying and drawing of Cat - 6 UTP, 4 pair annealed tinned copper conductor PVC insulated, PVC sheathed, unarmoured data cable in existing surface/recessed steel/PVC conduit of appropriate size including connection, etc. complete as required(a) Cat 6

Supplying, fixing, and configuring mini-GBIC SX MM fiber transceiver (up to 550m) compliant with IEEE 802.3 standards erected in provided rack complete.