Construction of Community Hall (Type-II) at Meykkudipatti in Palaya Gandarvakkottai Panchayat at Gandarvakkottai Block in Pudukkottai District under SCPAR-2024-25

Amount

Construction of Community Hall (Type-II) at Meykkudipatti in Palaya Gandarvakkottai Panchayat at Gandarvakkottai Block in Pudukkottai District under SCPAR-2024-25

Earth work Excavation for Foundation in all soils and Sub Soil to full depth as may 1 be directed except in hard rock requiring blasting but inclusive of shoring strutting and refilling the sides of foundation in sand, silt or other loose soil wet sand and silt not under water, ordinary earth as per SS20B.

Cement concrete 1 : 4 : 8 mix using 40mm HBG metal for foundation including 2 watering wherever necessary and laid in layers of not more than 15cm thick., compacting etc., complete complying with standard specifications and as directed.

Filling in Basement with conveyed Earth in layers of not more than 15cm. Thick well rammed, watered and consolidated complying with standard specifications etc, Completed

Supplying and Filling foundation and basement with filling M sand in layers not more than 15cm. Thick well ramed, watered and compacted Complete complying 4 with stanard specification.

strutting for plane surfaces in all floors with all cross bracings using mild steel sheets of size 90 x 60cm & 10 gauge stiffened, welded with steel angle of size 25 x 25 x 3mm for boarding laid over silver oak joists(Country wood) of size 10 x 6.5cm spaced @ about 90cm c/c and supported by casurina props of 10-13cm dia. spaced @ 75cm c/c etc., complete complying with standard specifications and as directed by the departmental officers. (For plinth beam, Grade beam, Raft slab, Pedestral, Staircase waist slab etc)

Supplying & Erecting centering for sides & soffiots including necessary supports & strutting upto 3.29m height for plane surfaces in all floors with all cross bracings using mild steel sheets of size 90 x 60cm & 10 gauge stiffened, welded with steel angle of size 25 x 25 x 3mm for boarding laid over silver oak joists(Country wood) of size 10 x 6.5cm spaced @ about 90cm c/c and supported by casurina props of 10-13cm dia. spaced @ 75cm c/c etc., complete complying with standard specifications and as directed by the departmental officers. Rate for 10m2.for the following items. (RCC floor slab, roof slab, Rectangular/ square, Tee/ Ell beams, Lintels, staircase waist slabs, Landing slabs, Landing beam, Portico beam etc., )

Brick work in cm 1:5 using country bricks ground moulded of size 23x11x7cm for 7 the following including curing etc. complete complying with standard specification.

Supplying and Fabricating and placing in position MS steel or Ribbed Tor Steel for all Reinforced Cement Concrete works as per the design given including cost of steel and binding wire in all floors etc, Complete complying with stanard specification. (MS rod or RTS bar will be supplied departmentally at section stores and cost will be recoverd at issue rate). the binding wire shall supplied by the contactor.

Cement concrete 1:1.5:3 using 20mm ISS HBG metal for all RCC item of works excluding cost of Rein forcement and fabricating charges, centering and shuttering but including curing and providing fixtures like fan clamps in the RCC floor or roof slabs wherever necessary and bearing surfaces of walls, sides and bottom of the slabs, beams etc., shall be finished smooth with cement mortar 1:3, 12mm thick. and with kraft paper without claiming extra as directed by the departmental officers complete complying with standard specifications.

Finishing the exposed surface of RCC item of work such as slabs, beams, sunshade, facia, canopy slab, staircase waist slab, landing slab etc., with CM 1:3, 10mm thick. including raking the surface. The rate is to include the cost of providing cement mortar beading or nosing for sunshades & staircase steps, landing slabs etc., complete complying with standard specifications.

Plastering with cm 1:5, 12 mm thick in all exposed faces including curing 11 etc, complete complying with standard specification and as directed

Dadooing walls with Glazed tiles of any colour and any size laid in CM 1:2, 10mm thick, and pointing with white cement 0.4 Kg per sqm mixed with colouring pigment to siut the colour of the tiles including finishing the joints neatly complying with the

Paving floor with Anti skid tiles of any colour and any size laid in CM 1:3, 10mm thick, and pointing with white cement 0.4 Kg per sqm mixed with colouring pigment to siut the colour of the tiles including finishing the joints neatly complying with the standard specifications and as directed by the departmental officers. The Glazed tiles should be got approved from the Departmental officers before execution

Paving floor with Vitrified tiles of any colour and any size laid in CM 13, 10mm thick, and pointing with white cement 0.4 Kg per sqm mixed with colouring pigment to siut the colour of the tiles including finishing the joints neatly complying with the standard specifications and as directed by the departmental officers The biles should be got approved from the Departmental officers before execution

Weathering course concrete using best quality broken brick jelly of size 20mm in pure slacked lime over the RCC roof slab in th proportion of brick jelly to lime being32:12.5 by the volume and laid over a single layer and consolidated to the required dsesign & finished thick, beating the concrete with wooden beaters of approved pattern, keeping the surface contantly wetted with sprinking lime & jaggery water as per standard specifications etc, complete as directed by the departmental officers.

Finishing the top of roof with one course of machine pressed tiles of size 20 x 20 x 2cm of approved quality laid in CM 1:3, 12mm thick With water proofing compound confirming to IS by 2% by weight of cement used & the joint pointed neatly to full depth of tiles with the same water proofing compound mixed with cement mortar, Red oxide etc., complete complying with standard specifications

Supply and fixing of steel doors, windows and ventilators with the following Description as per standard specification

Doors 1.8 x 2.1

Doors 0.9 x 2.1

Doors 0.75 x 2.1

Windows 1.5 x 1.3

Windows 0.9 x 1.3

Grazed Ventilator 0.6 x 0.45

Grazed Ventilator 0.6 x 0.45

Jali 1.8 x 1.3

Painting two coats with Distembering painting including cost of paint and labour charges etc., complete complying with standard specifications and as directed by the departmental officers. (The paint should be got approved by the Departmental 18 officer before use on works)

Painting two coats with plastic emulsion paint of approved colour and quality including cost of paint and labour charges etc, complete complying with standard specifications and as directed by the departmental officers (The paint should be got approved by the Departmental officer before use on works)

Painting two coats over iron works such as doors, windows, ventilators, window bars, balustrades etc, with best approved best quality of synthetic enamel paint of approved colour over the existing priming coal etc., complete complying with standard specifications and as directed by the departmental officers (The paint should be got approved by the Departmental officer before use on works)

Providing and laying Tactile Flooring in the specified area including, cost and conveyance of all materials including all labour charges etc complete. Tactile Flooring as per item No 14

Electrical Arrangements

Wiring with 2 x 1.5 sq.m (22/0.3) PVC insulated unsheathed SC Cu Conductor of 1100V grade in suitable PVC rigid pipe on wall and polling with PVC accessories with TW switch box in flush with wall covered with hylum sheet of 3mm thick with painting of suitable colour for open PVC light point/fan point(for electronic regulator) - S.D No. 20

Wiring with 2 x 1.5 sq.m (22/0.3) PVC insulated unsheathed SC Cu Conductor of 1100V grade in suitable PVC rigid pipe on wall and coiling with PVC accessories and with 150 x 100 x 113 TW switch box for SA 3pin non inter locking CS plug with painting of suitable colour with continuos earth wire connection of 14 SWG TC wire for open PVC S.D.No: 36

Supply and fixing of 1200mm (48") AC ceiling fan with stepped electronic 300 W regulator with 1 meter down rod on the existing chang S.D.no: 107

Supply and run of 2 of 1.50 sq.mm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100 V on 7/20 Gt bearer wire for service connection mains. S.D. No: 64

Supply and fixing of single box type 4'40 W flu fitting complete with copper choke and condensor with TW round blocks on wall or coding with flu tube with PVC unsheathed copper leads from terminals to the fitting-S.D.No. 88

Supply and Fixing of CFL bulb 11w including cost and conveyance of all materials and labour charges etc complete SD 80

Supply and fixing of WT bulk head fitting with guard suitable for incandescent lamp with 100W bulb SD 85

Supply and fixing of 16 Amps DPIC Switch of 500V with fuse and neutral (Side Handle) on suitable TW Board, with earth connectes only. S.D.No: 142

Supply and fixing of TNEB meter Board suitable for 32A Single phase service connection with 32A fuse unit(500V) 32A neutral lok and wath link (1"x1/8" Copper flat) on TW plank of size 375mmx300mmx19men with supporting TW reepers of 1" thick an either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wee from EB meter to fuse unit-SD No: 125.

Water Supply arrangemnts

63 mm PVC Pipe in 4KSC

63mm PVC MTA

63 mm PVC Bend

Earth work excavation in all clauses of soil as por SS201

Supplying and fixing of 110mm dia PVC pipe in position best approved of BIS quality PVC rain water down fall pipes having a pressure of 4 k sq.cm including cost of necessry PVC shoe, PVC bend, cast inn gratings of required diameter and special clamps, brass screws, noik etc., and fixing of cast iron gratings at junction of parapet and the ROU roof slab including finishing neatly etc., complete The rale shall be inclusive of cast of removable cast iron grating The PVC pipe shathig fixed in wall with special type of "U" clamp at the centre of the pipe fin in addition to those for more than 3.0 metre pipe length, etc complete complying with standard specification.

Provision for HDPE tank 2000litre

Provision for Collapse Gate

Provision for Name board and Lettering

Hand rail

GST Amount for providing Service to Government Contract Works for the above Construction & Maintenance Works. { GST Amount is the Total GST Amount for overall quoted amount (Both Construction and Maintenance) above this row in column "BB" for all works in this package} (Refer Clause 13.2 & 13.3 of Section 2 of Instruction to Bidders (ITB) of SBD)

I RAYAR (BID ID -1252378)

GL INFRA (BID ID -1252566)

P Pandiaraj (BID ID -1252649)