Replacement of BER Furniture

Almirah large steel with shelves as per Drawing - FD- 1031 (a) Almirah large steel shall be manufactured all as per specifications and as shown in drawing. (b) All sizes, shapes and dimensions shall be as per drawing. (c) Top, sides, back, bottom and front shall be of 1mm nominal thick mild steel sheet. The base shall be made of two numbers mild steel sheet channels back welded to bottom of almirah with ends covered. Four shelves equally spaced making five compartments shall be provided. (d) 100mm long steel chromium plated Handle and three way locking device shall be provided to front shutter as shown on drawing. The lock shall be of brass having 6 lever with key in duplicate and make of lock shall be Godrej/Harrsion/Link as approved of GE in writing. (e) Each leaf of front shutter shall be hinged with three numbers butt hinges 75mm long and shutter shall be side hung. (f) All Almirah steel surfaces both internally and externally shall be spray painted with 2 coats of synthetic enamel paint over a coat of red oxide primer. Colour and tint of coating shall be as approved by GE.

Almirah Medium steel with shelves as per Drawing - FD- 1032 (a) Almirah steel medium shall be manufactured all as per specifications and as shown in drawing. (b) All sizes, shapes and dimensions shall be as per drawing. (c) Top, sides, back, bottom and front shall be of 1mm nominal thick mild steel sheet. The base shall be made of two numbers mild steel sheet channels back welded to bottom of almirah with ends covered. Three shelves equally spaced making four compartments shall be provided. (d) 100mm long steel chromium plated Handle and three way locking device shall be provided to front shutter as shown on drawing. The lock shall be of brass having 6 lever with key in duplicate and make of lock shall be Godrej/Harrsion/Link as approved of GE in writing. (e) Each leaf of front shutter shall be hinged with three numbers butt hinges 75mm long and shutter shall be side hung. (f) All Almirah steel surfaces both internally and externally shall be spray painted with 2 coats of synthetic enamel paint over a coat of red oxide primer. Colour and tint of coating shall be as approved by GE.

Almirah Medium steel half hanging and half shelving as per Drawing - FD- 1034 (a) Almirah steel medium 1/2 Hanging & 1/2 Shelving shall be manufactured all as shown on drawing and as specified. The overall size and dimensions of members shall be followed as per details given/shown on drawing. (b) Top, sides, back, bottom and front shall be of 1mm nominal thick mild steel sheet. The base shall be made of two numbers mild steel sheet channels back welded to bottom of almirah with ends covered. Shelves and conduit pipe shall be provided as per drawing. (c) Welding process shall be of MIG (Metal Inert Gas) type using Carbon dioxide and Argon blend. (d) The lock shall be of brass having 6 lever with key in duplicate and make of lock shall be Godrej/Harrsion/Link as approved of GE in writing. (e) Steel handle shall be chromium plated mild steel and shall be of size 100mm. (f) The welded joints of steel members shall be filed smooth before application of primer. The primed surfaces shall then be thoroughly cleaned and prepared prior to coating of paint. (g) All Almirah steel surfaces both internally and externally shall be spray painted with 2 coats of synthetic enamel paint over a coat of red oxide primer. Colour and tint of coating shall be as approved by GE.

BATH MAT PVC as per DRG No FD oblique E6 oblique MAP oblique 07 (a) PVC - All PVC work shall be of standard class PVC. (b) Legs - Legs shall be 10 x 100mm in arc. (c) Sheet - PVC seat shall be 5mm thick. (d) Stiffeners - The stiffeners shall be 3mm x 10mm thick moulded with the seat in single piece. (e) All other details shall be as shown on drawing.

Bed Hard as per Drawing - FD oblique E6 oblique MAP oblique 08(R) (a) Bed hard shall be manufactured all as shown on drawing and as specified. The overall size of bed hard and dimensions of members shall be followed as per details given/shown on drawing. (b) Frame work of bed hard shall be fabricated out of MS square/rectangular pipes of 18 gauge conforming to relevant IS and shall be fabricated to the size all as shown on drawing. All welded joints shall be grinded to smooth finish. (c) Bed top shall be of 12mm thick phenol bonded commercial ply BWR grade conforming to IS 303 with ISI Mark of make as approved by GE. The plywood surfaces shall be unpolished. (d) Head board and foot board shall be of 18mm thick pre-laminated particle board laminated on both sides with decorative teak veneered finish and shall be as specified herein before. Fixing of head board and foot board to MS square tubes shall be with screws all as shown on drawing. Edging to particle boards shall be of standard PVC beading minimum 1.6mm thick fixed with adhesive i.e. fevicol and wire nails. (e) All steel works shall be painted with powder coating over a coat of primer. Colour and tint of coating shall be as approved by GE. (f) Standard hard rubber/ PVC shoes of best quality as approved by GE shall be fitted to legs of the bed.

Bin Linen Multipurpose as per Drawing - FD oblique E6 oblique MAP oblique 09 (a) Bin linen multipurpose shall be manufactured all as shown on drawing and as specified. The overall size and dimensions of members shall be followed as per details given/ shown on drawing. (b) Top, bottom, sides, vertical supports, drawers and shelves shall be of 18mm thick pre-laminated particle board laminated on one side with decorative teak veneered finish and balancing white on the other side and shall be all as specified herein before. Fixing of shelves shall be all as shown on drawing. Edging to boards shall be of PVC beading fixed with adhesive i.e. fevicol and wire nails. (c) Back side shall be with 12mm thick decorative teak veneered plywood, grade 1 (with BWR resin) with decorative face veneers on both faces all as specified herein before. (d) Continuous piano hinges shall be of brass with width of flap 30mm when open shall be provided to the shutters. (e) �D� type aluminum anodized handles 75mm size shall be provided as shown on drawing to the shutters and drawers. (f) All teak wood edging and front side of teak veneered plywood shall be French polished to a glossy finish.

Book Case as per Drawing � FD-237 (a) Book case shall be manufactured all as shown on drawing and as specified. The overall size and dimensions of members shall be followed as per details given/ shown on drawing. (b) Top shall be of 19mm thick particle board bonded with phenol formaldehide plastic laminated sheet 1.5mm thick fixed on one side (natural teak shade of formica No. E61A or Decolam shade No. T 462). Shelves and shutter shall be with teak veneered (one side) commercial ply otherside Particle Board 12/19mm thick bonded with phenol formaldehide shall be used. Fixing of shelves shall be all as shown on drawing. 3mm thick teak wood edging alround to be provided as specified in drawing. (c) Back side shall be with 6mm thick commercial plywood as specified herein before. (d) Continuous piano hinges shall be of brass shall be provided to the shutter. Ball spring catch ball to be fixed to shutter. (e) Chromium Plated Knob shall be provided as shown on drawing to the shutter. (f) All wood work and teak veneered surfaces shall be French polished to a glossy finish except where painting is indicated on drawings.

Book Shelf Large Steel as per Drawing - FD- 69(M) (a) Book shelf open large steel shall be manufactured all as shown on drawing and as specified. The overall size and dimensions of members shall be followed as per details given/shown on drawing. (b) All steel members shall be manufactured with 1mm thick MS sheet and as shown in drawing. (c) Welding process shall be of MIG (Metal Inert Gas) type using Carbon dioxide and Argon blend. (d) The welded joints of steel members shall be filed smooth before application of primer. The primed surfaces shall then be thoroughly cleaned and prepared prior to coating of paint. (e) All steel surfaces both internally and externally shall be spray painted with 2 coats of synthetic enamel paint over a coat of red oxide primer. Colour and tint of coating shall be as approved by GE.

Chair Dining Officers as per Drawing � FD/MAP-II/04 (a) Chair Dining Officers shall be manufactured all as shown on drawing and as specified. The overall size and dimensions of members shall be followed as per details given/ shown on drawing. (b) 40 Density cushion as approved by GE duly covered with approved tapestry cloth shall be fixed over 12mm thick BWR plywood as specified in drawing. (c) All dimensions given for wood work are finished sizes. (d) Timber shall be seasoned teakwood grade-I unless otherwise specified. All joints & fixing shall be done by in accordance with the standard workmanship/specification. (e) All wood work shall be French polished to a glossy finish except where painting is indicated on drawings.

Chair Easy as per Drawing � FD 229 (a) Chair Easy shall be manufactured all as shown on drawing and as specified. The overall size and dimensions of members shall be followed as per details given/ shown on drawing. (b) All wood work shall be of 1st class hard wood (teak) and as shown in drawing and as specified herein before. (c) Seat and back shall be woven with cane plastic 1.8mm wide half round and Border shall be 3.5mm wide plastic cane. Plastic cane shall be of white or cream colour as approved by GE. Thickness of plastic cane shall be not less than 0.4mm. Weaving holes shall be provided into the rails at 12.5mm centre to centre. Weaving shall be done as per Godrej Pattern. (d) All wooden parts shall be joined with Mortice and Tenon/ Tongued and Grooved joint method as required in accordance with standard workmanship. (e) All timber surfaces exposed to direct view (when the item is placed in normal position) shall be French polished to achieve a glossy finish as specified herein before. The unexposed surfaces shall be smoothened with sand paper. (f) Standard hard rubber rings as approved shall be screwed to the bottom of each leg.