Installation of Electromechanical accesorries for water supply arrangement at CNCI campus under Electrical Division PHE Dte

Amount

Supply & delivery of 415 V MCC cum PDB. with minimum 2mm thickness and degree of protection IP - 54, conforming to IS-8623 withsuitable Bus bar, Digital Voltmeter Ammeter, Contactor, delay timer, MCB, starter etc. as detailed in Annexure - I 7.5-15 HP with SDS (Star, delta starter)- 3No., 2HP DOL starter - 1No. Panel make : DIGITEK / RNR Industries / PCE Projects / OPG Power System / ECS. [TC / GC to be submitted along with panel after approval of detail power and control circuit drawing by EIC].

Supply and delivery at site submersible pumping machinery directly coupled with wet openwell winding type submersible motor having the following specification pump. Duty Condition : 19.8 m3 /hr. Head : 55 mtr. Motor : Submersible type 3 Ph. 50 Hz. 415V + 10%, S/D Impeller : GM / SS Motor winding : Wet Type. Pump outlet -50/65 mm. Make : KSB / Texmo / PLUGA / BG. (Test certificate, warranty certificate along with characteristic curve should be submitted at the time of delivery.)

Supply & delivery at site of following items -

80 mm dia M.S. Pipe as per IS 1239, Part-I, medium type

80 mm dia M.S Flange

80 mm dia M.S Tee all flange

80 mm dia M.S long Bend flanged

80 mm dia M.S short Bend flanged

80 x 50 mm dia M.S Reducer

50 mm dia M.S Flange

50 mm dia M.S long Bend

50 mm dia Pipe (medium type) as per IS 1239, Part-I uPVC column pipe (80 mm dia) with both side threaded (8TPI) with one end socketted & "O" ring biax technology with wiring lock system, non-corrossive, high tensile having ISO 9001 standard (Make: Ashirbad/Any other approved make)

1.5 mtr long

CIDF single door swing type non-return valve (PN-1.0) with flange ends drilled as per relavant I.S. (Make : IVI / IVC / Hazra / Upadhya/ Jupitor Engg co.)

80 mm dia CIDF butterfly valve (PN-1.0) with flange ends drilled as per relavant I.S. (Make : IVI / IVC / Hazra / Upadhya/ Jupitor Engg co.)

Pressure gauge 102 mm. dia and 7 kg. /cm2 range, brass cocks and fitting complete (Make- H.Guru)

5/8" x 100 mm long bolt with nut

Rubber Gasket (approx 4kg)

Dismantling of existing two nos centrifugal pump motor set, electrical connection, all suction & delivery pipe line, its accessories and stacking the same at CNCI Hospital site including loading & unloading complete

Installation of two nos open well pump motor set into the sump , joint delivery outlet, fitting & fixing all valves , making 12 mm dia uPVC pipe line for Priming & Gland leakage, making new electrical connection using supply materials and testing entire set. (2 nos.)

Supply & delivery of 35 sq. mm. 3 1/2 core PVC insulated Al. armoured cable (1.1 KV grade), IS 1554 (Part - I) / IS 7098 (Part-I) Make : INCAB / Gloster / NICCO / Polycab / Crystal

Supply & delivery at site 6 sq. mm. 3 core copper (1.1 KV grade) PVC insulated waterproof flat submersible cable , Make : FENOLEX / NETCO/MESCAB/CRYSTAL

Supply & delivery of 100 amp. 440 V, 50 Hz. TPN Main switch with rewireable type fuse link (Make: Havells / Standard) At site.

Supply & delivery of 100 Amp. Industrial copper Busbar (Make Havells/Siemens) with as required of necessary wire and materials to complete the job.

Installtion of panel, mainswitch, busbar and other electrical accessories, drawing and connection of cable to panel, pumping machieries etc. with supply of gland, socket, saddle, screws etc and earthing connection with all equipment including successfull operation along with testing of the whole installation as per entire satisfaction of EIC

Installation of chlorinator pump set and drawing of power line by supplying of necessary wire and continuous earthing connected to auto/ manual panel. This includes the cost of making necessary brick foundation base with neat cement finish by supplying all requered materials and testing entire set as per direction of EIC

Making internal electrification with 16Amp main switch/MCB (Make: Havells) by 1.5 sq.mm FRLSH grade copper PVC insulated single core multistrand wire in PVC casing of pump house consisting of 2 nos. bracket point, 1 no. tube light point, 1 no. bulk head point and five pin 5 amp. socket - 1 no., 1 no. celing fan point with controlling switches including supply of 2 nos. bracket with 12 W LED lamp, 1 no. (20 watt) LED tube light set with 9W LED lamp, outdoor type bulk head 1 no. with LED lamp and drawing of necessary earthing (1.0 sq.mm) material all complete as per direction EIC

Earthing confirming to IS: 3043 by 50mm dia GI pipe 3.64mm thick x 3.04m long and 1 x 4 SWG GI (Hot Dip) wire (4 mts. Long), 13mm dia x 80mm long GI bolts, double nuts, double washers including supply & fixing of 15mm dia GI pipe protection (1 mtr long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 mtrs below the ground level and restoring surface duly rammed as below. a) For Soft Soil By TATA - Medium GI pipe

Drawing earth by M.S. Flat strip (25mm x 6mm) from earth bus / electrode to above different components as per I.E. Rules and as per direction of EIC.

Supply & fitting fixing of 100 Amp. Kit kat (3 nos.) (Make : Havells) with required size wooden board mounted on wall.

Dismantling the pump rotating assembly part by part, servicing of all spares and reassembling of the pump part by part along with supply of minor spares, grease nut bolt etc. in proper alignment and painting as per direction.

Add: 18% GST

Add: 1% CESS

JOYSHREE CONCERN (BID ID -5987421)

ANJAN ENTERPRISE (BID ID -5987345)