Providing and laying of Underground(UG) Cables along with LT Cubical panels and supply installation testing and and commissioning of 250kva disel generator set with automatic mains failure(AMF) panel for the university auditorium

Supply, Transportation, erection and commissioning (Excluding Foundation) of 250 KVA, 3 Phase, 415, 50 Hz, not less than 310 BHP, water cooled multy cylinder diesel generator set set with alternator of 250 KVA output continious rating at 0.8 p.f. Batteries. directly coupled Engine, Alternator and radiator with guard and mounted on a common base frame of Robust construction and complete with AMF control panel having IP-52 protection, anti vibration mounts of reputed make, Acoustic Enclosure as per CPCB norms IV, sound absorbing material to restrict sound level up to 75 dB up to 1 mtr distance and etc as per the following specifications mentioned.

A. Alternator : Kirloskar / Stamford / Crompton Greaves / Leroy Somer make. The alternator of the output rating shall be 3 Phase, 415V, 50Hz, Ac , 0.8 P.F. lagging at 1500 RPM. The alternator is self excited, self regulated, and shall confirm to IS: 13364 of 1992 with regulation of +5% from no load to full load. degree of protections shall be IP21.

B.Diesel Engine : Kirloskar / Cummins / Greaves Cotton Diesel Engine start, developing suitable not less than 310 BHP output at 1500 RPM with mechanical / electronic governing so as to enable the alternator to give 250KVA continuous output at 0.8 P.F. lagging at NTP conditions. The diesel engine shall be capable of providing 10% O/L for 1 Hr for every 11 Hrs of continuous running at full load. The engine with 1st filling of oil and Diesel etc.01. Exhaust pipe of required size as per the standards.02. Diesel tank suitable for 8 to 12 Hours running capacity.03. Residential Silencer.04. SMF Batteries with leads as per the Manufacturer standards

C. AMF Control Panel:- AMF control panel shall be fabricated with 16SWG CRCA sheet shall be totally enclosed with dust and Vermin proof, floor mounted / wall mounted type and shall be comprising the following. 01. Voltmeter with selector switch. 02. 4 Pole MCCB incomer of 630 and 400A rating of Legrand/Schenieder / LK make for EB and DG . 03. Ammeter with selector switch with CTs. 04. PF Meter and frequency Meter. 05. Indicator lamps (set Run, Load ON) with fuses. 06. KWH Meter of required rating. 07. Set of control fuses and current transformer. 08. Input Terminal board and output Terminal Board. 09. Battery charger with transformer rectifier unit. 10. Alternator supply air break contactor of LK make. 11. Main supply air break contactor of LK make. 12. Audio Visual announciation . 13. Main supply voltage set of control relays and timers with one mode selector switch, set of push buttons. 14.Control cable up to 15 Mtrs 2.5Sqmm 6 Core

Supply, Transportation and laying PVC armoured under ground cable of size 3.5 Core 120.00 Sqmm 1100V grade of Makes : Torrent / Unicab / Universal /Polycab / Havells / KEI / RR kable with ISI mark standard / Solid alluminium conductor etc., complete by making trench in all soils up to 0.90Mtr deep and filling the Sand at the bottom of trench before laying the cable and emmbedding the cable complete on sand layer and bricks placed on top of the cable width wise all over the run and back filling the exacavated earth without stones and making the surface proper with 15cm crown on the top duly providng root indicators at every 8 Mtrs embeded in CC as per IS 1255 and as directed by the department including cost and conveyance of all materials and labour charges etc., complete

Supply, Transportation and laying PVC armoured under ground cable of size 3.5 Core 95.00 Sqmm 1100V grade of Makes : Torrent / Unicab / Universal /Polycab / Havells / KEI / RR kable with ISI mark standard / Solid alluminium conductor etc., complete by making trench in all soils up to 0.90Mtr deep and filling the Sand at the bottom of trench before laying the cable and emmbedding the cable complete on sand layer and bricks placed on top of the cable width wise all over the run and back filling the exacavated earth without stones and making the surface proper with 15cm crown on the top duly providng root indicators at every 8 Mtrs embeded in CC as per IS 1255 and as directed by the department including cost and conveyance of all materials and labour charges etc., complete

Supply, Transportation and laying PVC armoured under ground cable of size 4 Core 16 Sqmm 1100V grade of make Makes : Torrent / Unicab / Universal /Polycab / Havells / KEI / RR kable with ISI mark standard / Solid alluminium conductor etc., complete by making trench in all soils up to 0.90Mtr deep and filling the Sand at the bottom of trench before laying the cable and emmbedding the cable complete on sand layer and bricks placed on top of the cable width wise all over the run and back filling the exacavated earth without stones and making the surface proper with 15cm crown on the top duly providng root indicators at every 8 Mtrs embeded in CC as per IS 1255 and as directed by the department including cost and conveyance of all materials and labour charges etc., complete

Supply, Transportation and laying PVC armoured under ground cable of size 50 Sqmm 3.5 core 1100V grade of make Makes : Torrent / Unicab / Universal / Polycab / Havells / KEI / RR kable / Fortune Arrt / Gloster with ISI mark standard / Solid alluminium conductor etc., complete by making trench in all soils up to 0.90Mtr deep and filling the Sand at the bottom of trench before laying the cable and emmbedding the cable complete on sand layer and bricks placed on top of the cable width wise all over the run and back filling the exacavated earth without stones and making the surface proper with 15cm crown on the top duly providng root indicators at every 8 Mtrs embeded in CC as per IS 1255 and as directed by the department including cost and conveyance of all materials and labour charges etc., complete

Supply, Transportation and laying PVC armoured under ground cable of size 3.5 Core 300.00 Sqmm 1100V grade of Makes : Torrent / Unicab / Universal /Polycab / Havells / KEI / RR kable with ISI mark standard / Solid alluminium conductor etc., complete by making trench in all soils up to 0.90Mtr deep and filling the Sand at the bottom of trench before laying the cable and emmbedding the cable complete on sand layer and bricks placed on top of the cable width wise all over the run and back filling the exacavated earth without stones and making the surface proper with 15cm crown on the top duly providng root indicators at every 8 Mtrs embeded in CC as per IS 1255 and as directed by the department including cost and conveyance of all materials and labour charges etc., complete

Supply of and fixing of 250A 4 Pole Change Over Switch on Load with open Execution fixed on wall with suitable 14 SWG CRCA sheet enclosure including all charges and cable connections Makes : Socomec / LK

Supply of and fixing of 400A 4 Pole Change Over Switch on Load with open Execution fixed on wall with suitable 14 SWG CRCA sheet enclosure including all charges and cable connections Makes : Socomec / LK

Supply and fixing of suitable out door feeder piller box of size made with 14 SWG CRCA sheet with double door arrangement, making powder coating after processing of 7 Tank process, lock and key, hinges, rubber gasket, danger board,suitable angle iron stand for mounting the feeder pillar with cement concrete, including Supply and fixing of Legrand / Schnieder make 63A, 4 Pole MCB as incomer, 9 Nos 6-32A SP MCBs as out goings, indication lamps, din channel, 6 Sqmm 3 core copper cable for invidual light control, connectors, bus bars, shroudings, gland plates and provision for 3 phase energy meter etc., complete for finished item of work and suitable wiring provision for connecting the nature switch with following

Supply and fixing of 12 way SPN DB Harizontal with IP-43 Protection makes Legrand / Schneider / LK(L&T) suitable for with 1No 63A DP isolator and 10 Nos 6-32A 10KA SP MCB,C/D Curve ISI Mark of make Legrand-DX3 / Schneider-Acti9 / LK (L&T) Exora including internal connections and labour charges for concealed etc., complete

Supply and fixing of 8 way TPN DB Harizontal with IP-43 Protection makes Legrand / Schneider / Siemens / LK / Hager / Havells Stadx / ABB / / BCH. suitable for with 1No 100A FP isolator and 24 Nos 6-32A 10KA SP MCB,C/D Curve ISI Mark of makeLegrand-DX3 / Schneider-Acti9/ Siemens / LK Exora / BCH / Havells Stadx with 100 A tinned copper busbar, neutral bar, earth bar and cable ties for cable management, fully shrouded neutral bar,profile blanking modules for unused MCB ways, din bars and detachable gland plate etccomplete with inter connections , including internal connections and labour charges for concealed etc., complete.

Supply and erection indoor Panel of Suitable size made with 14 SWG CRCA sheet with individual door arrangement for each below mentioned specifications, making powder coating after processing of 3 phase and neutral 415V free standing floor mounted MV panel made out of No.14 gauge CRCA sheet steel after 7 tank process and painting with powder coating. The panel shall consists of suitable rating Aluminium busbar supported with DMC /SMC barriers and colour coated with heat shrinkable sleeves. The metering shall be provided as specified, lock and key, hinges, rubber gasket, danger board,suitable angle iron stand for mounting the panel with cement concrete.,The panel shall have short-circuit with standing capacities of minimum 50KA and consists of switchgear as mentioned below.The shall be got be manufactured from the manufacturers of CPRI test certificate only including internal connections cost and conveyance of all materials & labour charges. With following specifications

Supply and erection of 630A 4 Pole MCCB, Adjustable, Confirms to IS/IEC 60947-2 having Breaking Capacity 50 KA with thermal magnetic release Panel Mounted. Makes : L&T- D sine / Schneider-NS NSX/Legrand -DP X3.with all connections etc.,including labour charges complete on existing panel-1 No

Supply and erection 250A 3 Pole MCCB, Adjustable, Confirms to IS/IEC 60947-2 having Breaking Capacity 36/35 KA with thermal magnetic release Panel Mounted. Makes : L&T- D sine / Schneider-NS NSX/Legrand -DP X3 with all connections etc.,including labour charges complete on existing panel-2 Nos

Supply and erection 160A 3 Pole MCCB, Adjustable, Confirms to IS/IEC 60947-2 having Breaking Capacity 25 KA with thermal magnetic release Panel Mounted. Makes : L&T- D sine / Schneider-NS NSX/Legrand -DP X3 with all connections etc.,including labour charges complete on existing panel.-3 Nos

Supply and erection 125A 3 Pole MCCB, Adjustable, Confirms to IS/IEC 60947-2 having Breaking Capacity 25 KA with thermal magnetic release Panel Mounted. Makes : L&T- D sine / Schneider-NS NSX/Legrand -DP X3 with all connections etc.,including labour charges complete on existing panel.-4 Nos

Supply and erection 63A 3 Pole MCCB, Adjustable, Confirms to IS/IEC 60947-2 having Breaking Capacity 16 KA with thermal magnetic release Panel Mounted. Makes : L&T- D sine / Schneider-NS NSX/Legrand -DP X3 with all connections etc.,including labour charges complete on existing panel-1 Nos

Supply and erection of 50-63A TP MCB 10KA, C/D Curve ISI Mark. Makes : Legrand-DX3 / Schneider-Acti9 / L&T Exora Mounted. with all connections etc.,including labour charges complete on existing panel -8 Nos

METERING EQUIPMENT

Supply and erection of Analog LED indicator lamps on the existing box / panel board.L&T/C&S/SALZAR/HPL MAKE

Supply and erection of 0-500V volt Digital meter of size 96x96mm on exisiting box / panel board including connections etc., complete. CONZERVE/ ELMEASURE/ MECO/ HPL/ MAKE.

Supply and erection of 0-100 / 200 / 400 / 600 /1000 Digital Ammeter of size 96x96mm on existing box / panel board including connections etc., complete NZERVE/ELMEASURE/MECO/ HPL MAKE

Supply and erection of LT current transformer with bar primary 100/5A to 1000 / 5A ratio in the existing box / panel including connections etc., complete. KAPPA MAKE.

Supply,fabrication and erection of 75 x 6 size Aluminium bus bars in the existing sheet steel enclosure with resin cast insulators supports etc., complete including cost and conveyance of all materials all labour charges

Supply,fabrication and erection of 20 x 6 size Aluminium bus bars in the existing sheet steel enclosure with resin cast insulators supports etc., complete including cost and conveyance of all materials all labour charges

Supply,fabrication and erection of 40 x 6 size Aluminium bus bars in the existing sheet steel enclosure with resin cast insulators supports etc., complete including cost and conveyance of all materials all labour charges

supply,transportation,Fabrication and erection of 14SWG CRCA sheet steel enclosure for power control cubicle panel / boxes etc., including cutting,bending drilling, welding and reveting etc., complete with cleaning with 7 tank process and painting with powder coating including cost and conveyance of all materials and labour charges.

Erection of Panel board with C.C bed on suitable angle iron base frame etc., complete.

Supply and erection indoor Panel of Suitable size made with 14 SWG CRCA sheet with individual door arrangement for each below mentioned specifications, making powder coating after processing of 3 phase and neutral 415V free standing floor mounted MV panel made out of No.14 gauge CRCA sheet steel after 7 tank process and painting with powder coating. The panel shall consists of suitable rating Aluminium busbar supported with DMC /SMC barriers and colour coated with heat shrinkable sleeves. The metering shall be provided as specified, lock and key, hinges, rubber gasket, danger board,suitable angle iron stand for mounting the panel with cement concrete.,The panel shall have short-circuit with standing capacities of minimum 50KA and consists of switchgear as mentioned below.The shall be got be manufactured from the manufacturers of CPRI test certificate only including internal connections cost and conveyance of all materials & labour charges. With following specifications

Supply and erection 160A 4 Pole MCCB, Adjustable, Confirms to IS/IEC 60947-2 having Breaking Capacity 25 KA with thermal magnetic release Panel Mounted. Makes : L&T- D sine / Schneider-NS NSX/Legrand -DP X3 with all connections etc.,including labour charges complete on existing panel.-1 Nos

Supply and erection of 50-63A TP MCB 10KA, C/D Curve ISI Mark. Makes : Legrand-DX3 / Schneider-Acti9 / L&T Exora Mounted. with all connections etc.,including labour charges complete on existing panel -12 Nos

METERING EQUIPMENT

Supply and erection of Analog LED indicator lamps on the existing box / panel board.L&T/C&S/SALZAR/HPL MAKE

Supply and erection of 0-500V volt Digital meter of size 96x96mm on exisiting box / panel board including connections etc., complete. CONZERVE/ ELMEASURE/ MECO/ HPL/ MAKE.

Supply and erection of 0-100 / 200 / 400 / 600 /1000 Digital Ammeter of size 96x96mm on existing box / panel board including connections etc., complete NZERVE/ELMEASURE/MECO/ HPL MAKE

Supply and erection of LT current transformer with bar primary 100/5A to 1000 / 5A ratio in the existing box / panel including connections etc., complete. KAPPA MAKE.

Supply,fabrication and erection of 20 x 6 size Aluminium bus bars in the existing sheet steel enclosure with resin cast insulators supports etc., complete including cost and conveyance of all materials all labour charges

Supply,fabrication and erection of 40 x 6 size Aluminium bus bars in the existing sheet steel enclosure with resin cast insulators supports etc., complete including cost and conveyance of all materials all labour charges

supply,transportation,Fabrication and erection of 14SWG CRCA sheet steel enclosure for power control cubicle panel / boxes etc., including cutting,bending drilling, welding and reveting etc., complete with cleaning with 7 tank process and painting with powder coating including cost and conveyance of all materials and labour charges.

Erection of Panel board with C.C bed on suitable angle iron base frame etc., complete.

Supply and fixing of 8 Way VTPN DB Make:Legrand / Schneider/ LK(L&T) Accomodating 160A 4 Pole MCCB Make:LK - D sine / Schneider-NS NSX / Legrand -DP X3 As Incomer and 8 Nos(50-63)A TP MCBs as outgoing and with IP 43 Protection of makes: Legrand-DX3 / Schneider-Acti9 /LK Exora including internal connections and labour charges for concealed etc., complete

Providing independent earthing for Important equipment with 100mm dia Heavy gauge C.I ( Cast iron ) pipe with Flange 2.5m long enclosed in C.C/ brick massonry chamber of 450m x 450m x 400mm with R.C.C. Slab cover duly providing staggered holes filling with salt and charcoal from the bottom of the pipe giving earth connection from electrode through flange with all accessories and labour charges complete, as per IS specifications 732/1982 (Part II)

Providing independent earthing by exacavating a pit to a depth of 2.25Mtr in all soils as per size specified in the data for Sophisticated Electronic equipment with 600mm x 600mm x 3.15mm thick copper plate rigidly fixed to 19mm dia 'B' Class G.I Pipe of 2.5Mtr lengthwith funnel as per National Electric Code and earth connection from electrode GI strip of 40mm x 5mm x 200mm length to be bolted with nut bolts to G.I.pipe including 25mm x 3mm copper strip of 6Mtrs length connected from plate to GI strip including filling with 20Kg Salt and 40Kg Charcoal or 40Kg bentonite powder from the bottom of the pipe and providing CC / Brick massonry chamber 450mmX450mmX400mm and covered with R.C.C. Slab including all accessories and labour charges etc complete as per IS specification 732/1982 (Part II).

Supply and run of 25mmx6mm copper strip including cost of all accessories and labour charges etc.,complete

Supply and run of 50mmx6mm G.I strip including cost of all accessories and labour charges etc.,complete