Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹8.0 CrAccepted-AOC R O NEAR DEGREE COLLEGE ANU HAMIRPUR TEHSIL DISTRICT HAMIRPUR HP C O LINK ROAD TO SUNGRA KANDA KM 0 0 TO 4 555 SH FORMATION CUTTING 5 7 MTR WIDE ROAD C O R WALL B WALL C O UNLINED DRAIN C O CROSS DRAINAGE WORKS PARAPETS P F ROAD SIDE FURNITURE AND DUMPING SITES ETC KM 0 00 TO 4 555 | HAMIRPUR | HIMACHAL PRADESH | 174304 | ₹8.0 Cr Quoted ₹7.0 Cr | L1 | Accepted-AOC L1 |
| 2 | L2₹7.6 Cr+₹53.6 L (7.62%)Rejected-Finance | ₹7.6 Cr+₹53.6 L (7.62%) | L2 | Rejected-Finance L2 |
| 3 | Rejected-Technical VILLAGE P O AMARPUR TEHSIL GHUMARWIN DISTT BILASPUR H P | BILASPUR | HIMACHAL PRADESH | 174001 | - | - | Rejected-Technical Rejected |
| 4 | Rejected-Technical R O VPO DAULATPUR CHOWK TEHSIL GHANARI DISTRICT UNA HP | UNA | HIMACHAL PRADESH | 174301 | - | - | Rejected-Technical Rejected |
| 5 | Rejected-Technical VILL AND P O JAHU NEAR SHIV MANDIR TEHSIL BHORANJ DISTT HAMIRPUR HP | JAHU | HAMIRPUR | HIMACHAL PRADESH | - | - | Rejected-Technical Rjected |
Tender Value
₹8.4 Cr
EMD Value
₹16.7 L
Closing Date
31 Jan 2026, 10:30 amClosed
Executive Engineer
Executive Engineer HPPWD, Division Hamirpur
SH Providing and laying Annual surfacing C/o 900mm dia RCC Hume pipe type culverts and installation of crash barrier C/o retaining wall and breast wall Footpath U-Shape Drain etc. in km 0/0 to 9/0
2026_PWD_126681_1
R/R damages on Kohli to Pucca Bharo Bye pass road km 0/0 to 9/0
Open Tender
Civil Works
Percentage
180 days
Hamirpur
Please refer Tender documents.
15 documents required · 15 mandatory
₹10,000
EE Hamirpur
₹16.7 L
28 Mar 2026
24 Jan 2026
31 Jan 2026
24 Jan 2026
31 Jan 2026
24 Jan 2026
Earth work in excavation for all type of road structure such as retaining walls ,breast walls, culverts, drains and parapets etcetera in all type of classification of soil comprising of ordinary rock, hard rock, chiseling/ wedging out rocks (where blasting is prohibited ) as per drawing and MORT&H technical specification clause 304 and as per direction of the Engineer-in- Charge including setting out, construction of shoring and bracing removal of stumps and other deleterious materials and disposal of materials upto all leads and lift, including dressing of sides and bottom and back filling in trenches with excavated suitable approved material to the original surface in layers not exceeding 150mm(one hundred fifty millimetre) compacted thickness including shoring and strutting and pumping and bailing out water ( surface and sub soil water) upto all depth and any quantum of water including cleaning of slush which may arise out during dewatering as per the direction of the Engineer-in- Charge including entire carriage of material with in all leads ,lifts and other incidentals. The rates are inclusive octroi , royality , Malkana, toll tax or other taxes imposed by the Government exclusive GST.
Removal of land slide in hilly area in ordinary rock/slips in all kind of soil including excavation of saturated soil, boulder & rocky portion requiring wherever blasting and loading in tipper and dispoasl of unserviceable materials upto all leads, lifts and stacking of all useful/serviceable materials and neatly dressing the surface etcetera as per approved drawing and MORT&H technical specifications including entire carriage of material within all leads , lifts and other incidentals. The rates are inclusive octroi , royality , Malkana, toll tax or other taxes imposed by the Government exclusive GST.
Providing and laying plain cement concrete 1:4:8 (one cement : four sand : eight graded crushed hard stone aggregate 40mm (forty millimeters) nominal size mechanically mixed placed in foundation compacted by vibration and curing complete ensuring non-segregation conforming as per MORT&H technical specifications section 1500, 1700 and 2100 including the cost of form work including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive octroi , royality , Malkana, toll tax or other taxes imposed by the Government exclusive GST.
Providing and laying mechanical mixed and vibrated plain cement concrete 1:3:6 (one cement :three Sand :six graded/crushed stone aggregate 20mm (twenty millimeter) nominal size on ground or under water and curing complete including pumping or bailing out water, dewatering removal of slush as required at site which may arise at the time of laying under water complete for all heights and depths including cost of form work for plain concrete in open foundations for all types of structures complete as per drawing and MORT&H technical specifications clause 1500, 1700 & 2100 including entire carriage of material with in all leads , lifts and other incidentals . The rates are inclusive octroi , royality , Malkana, toll tax or other taxes imposed by the Government exclusive GST.
Providing and laying mechanically mixed and vibrated reinforced Cement Concrete design mix to obtain minimum compressive strength of grade M-20 (M- twenty) having minimum cement contents of 350kg (three hundred fifty kilogram) per cubic metre including cost of form work, and curing complete in sub structure upto all height/ depth on ground or under water and curing complete including form work with the mild steel plate, including pumping or bailing out water, dewatering removal of slush as required at site which may arise at the time of laying under water complete for all heights and depths as per drawing and MORT&H technical specification clause 1500,1700 & 2100 as per the direction of Engineer-in –charge. including carriage of material within all leads and lifts and other incidentals . The rates are inclusive octroi , royality , Malkana, toll tax or other taxes imposed by the Government exclusive GST.
Providing and Laying 900mm (Nine hundred millimetre) dia Reinforced cement concrete pipe NP3 (Non Pressure-three) prestressed concrete pipe for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 (one cement : two sand) but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets as per drawings and MORT&H technical specification clause 2900 including carriage of material within all leads and lifts and other incidentals . The rates are inclusive octroi , royality , Malkana, toll tax or other taxes imposed by the Government exclusive GST.
Providing and laying of inter locking concrete paver block vibro compacted upto M-35 (M-thirty five) grade having thickness 60mm (Sixty millimetre) including border or karb block of approved brand make of NITCO/ NTC/ BIS/ MODERN over sub base of sand as per drawing and MORT&H technical specification and and as per directions of Engineer- in- Charge including entire carriage of material with in all leads, lifts and other incidentals . The rates are inclusive octroi , royality , Malkana, toll tax or other taxes imposed by the Government exclusive GST.
Providing weep holes in brick masonry / stone masonry /plain and reinforced concrete abutment , wing wall ,return wall ,retaining and breast wall with 100mm (one hundred millimetre) dia AC,PVC pipe (D-plast)/ Finolex/ Supreme having working pressure not less than 4 kg (four kilograme )per centimeter square extending through the full width of the structures with slope of 1(V):20(H) (One vertical : Twenty Horizontal) towards drawing face complete as per drawing and MORT&H technical specification clause 2706 & 2200 as per direction of Engineer-in- Charge including entire carriage of material within all leads , lifts and other incidentals. The rates are inclusive octroi , royality , Malkana, toll tax or other taxes imposed by the Government exclusive GST.
Providing and fixing Geo-Textile membrane behind reinforced cement concrete and plain cement concrete retaining walls Ocean Non woven Geotextile 3mm (Three millimetre) thickness as per approved drawing and MORT&H technical specifications Clause 707 including entire carriage of material within all leads , lifts and other incidentals. The rates are inclusive octroi , royality , Malkana, toll tax or other taxes imposed by the Government exclusive GST.
Providing and erecting a “W” metal beam crash barrier comprising of 3mm(three millimetre) thick corrugated sheet metal beam, guard , rail 70cm(seventy centimetre) above road/ ground level, fixed on ISMC series channel vertical post 150x75x5mm(one hundred fifty into seventy five into five millimetre) thick spaced 2 mtr (two metre) center to centre 1.8mtr (one point eight metre ) high 1.1m(one point one meter) below ground/ road level all steel parts and fitments to be galvanized by hot dip process all fittings to conform to IS:1367 and IS 1364 metal beam, guard rail to be fixed on the vertical post with a spacer of channel section 150x75x5mm(one hundred fifty into seventy five into five millimetre) 330mm (three hundred thirty millimetre) long complete as per MORTH technical specification Clause 811 and as per standard drawing and as desired by the Engineer-in Charge including entire carriage of material with in all leads, lifts and other incidentals . The rates are inclusive octroi , royality , Malkana, toll tax or other taxes imposed by the Government exclusive GST.
Providing and applying tack coat with bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.275 kg(zero point two seven five kilogram ) per square metre on the prepared granular surface treated with primer and cleaned with hydraulic broom as per MORT&H Technical Specification 2013 Clause 503 including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive octroi , royality , Malkana, toll tax or other taxes imposed by the Government exclusive GST.
Providing and laying 50mm (fifty millimetre) thick dense graded bituminous macadam with 40-60 TPH batch type hot mix plant producing an average out put of 75 (Seventy five) Tonne per hour using crushed aggregates of specified grading-II premixed with bituminous binder and filler of specified material VG-30 (VG-thirty ) at the rate of 4.25 percent (four point two five percent) minimum by weight of mix and filler, 2 percent (Two percent) transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORT&H technical specifications Clause 505 complete in all respect. including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive octroi , royality , Malkana, toll tax or other taxes imposed by the Government exclusive GST.
Providing and laying 40mm (fourty millimetre) thick bituminous concrete with 40-60 TPH batch type hot mix plant producing an average out put of 45 (fourty five) Tonne per hour using crushed aggregates of specified grading-II premixed with bituminous binder and filler of specified material VG-30 (VG-thirty ) at the rate of 5.5 percent (five point five percent) minimum by weight of mix and filler, 2 percent (Two percent) transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORT&H technical specifications 2013 Clause 507 complete in all respect. including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive octroi , royality , Malkana, toll tax or other taxes imposed by the Government exclusive GST.
Providing and laying hot applied thermoplastic compound 2.5mm thick including reflect rising glass beads @ 250gms per square metre area thickness of 2.5mm is exclusive of surface applied glass beads as per IRC-35 the finished surface to be level uniform and free from streaks and holes as per MORT&H technical specification section 803 and as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive octroi , royality , Malkana, toll tax or other taxes imposed by the Government exclusive GST.
Supplying and installation of delineators (road way indicators, hazard markers, object markers), 80-100 cm (eighty -one hundred centimetre) high above ground level, painted black and white in 15 cm (fifteen centimetre) wide strips, fitted with 80 x 100 mm (eighty into one hundred millimetre) rectangular or 75 mm (seventy five millimetre) dia circular reflectorised panels at the top, buried or pressed into the ground and conforming to IRC-79 as per drawing and MORT&H technical specification clause 805 including entire carriage of material with in all leads , lifts and other incidentals. The rates are inclusive of octroi, royality, malkana ,toll tax or other taxes imposed by the Government exclusive GST.
Providing and fixing cat eye make)(3M) of size 100x20mm made of heavy duty body shall be molded dual shank ASA /Acyclic styrene acyloretrite ) or HP/High impact polystyrene) ort ABS having electronically welded micro prismatic lens with abrasion resistant coating as approved by Engineer-in-charge. The road stud shall support a load of 13635 by tested in accordance with ASTM D4280.The slope of retro reflective surface shall be 35+/-5 degrees to base. The reflective panels on both side with at least 12cm. of each area side. The luminance intensity should be as per the specification ASTM as recommended in BS-8873 part 4 1973 as per approved sample and manufacture by the Engineer-in-charge .including carriage of materail within all leads and lifts . The rates are inclusive octroi , royality , Malkana, toll tax or other taxes imposed by the Government exclusive GST.
Providing and erecting direction and place identification retro-reflectorised sign as per IRC:67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm (two millimetre) thick with area not exceeding 0.9 sqm (zero point nine square metre) supported on a mild steel single angle iron post 75 x 75 x 6mm (seventy five into seventy five into six millimetre) firmly fixed to the ground by means of properly designed foundation with M-15 (M-fifteen) grade cement concrete 45 x 45 x 60 cm (fourty five into fourty five into sixty centimetre), 60 cm (sixty centimetre) below ground level as per approved drawing and MORT&H technical specifications clause 801 including entire carriage of material within all leads , lifts and other incidentals. The rates are inclusive octroi , royality , Malkana, toll tax or other taxes imposed by the Government exclusive GST.
Providing and installing single strip seal expansion joint Catering to maximum horinzontal movement upto 40mm (forty millimetre) complete as per approved drawing and specification to be installed by the manufacuturer/supplier or there authorised representative insuring compiance to the manufactures instructions for installation as per Drawings, MoRT&H Specifications Clause 2606 and , MoRT&H circular no. RW/NH-35049/1/96-S&R dated 30th November 2000 and 20th February 2001, IRC: SP: 69-2005 'Guidelines & Specifications for Expansion Joints' including entire carriage of material with in all leads and lifts as per direction of Engineer-in-Charge. The rates are inclusive octroi , royality , Malkana, toll tax or other taxes imposed by the Government exclusive GST.
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (One cement: three coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm (Five millimetre), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge) in all respects and as per approved drawing and MORT&H technical specifications Clause 409 including entire carriage of material within all leads , lifts and other incidentals. The rates are inclusive octroi , royality , Malkana, toll tax or other taxes imposed by the Government exclusive GST.
White washing two coats on parapet walls and tree trunks including preparation of surface by cleaning scraping etcetera drawings and MORT&H technical specification including carriage of material within all leads and lifts and other incidentals . The rates are inclusive octroi , royality , Malkana, toll tax or other taxes imposed by the Government exclusive GST.
Repair to patch/pot holes (any depth) in connection with repainting including sweeping free from dust and mud, scoring sunkeda surfaces in road, paths etcetera cutting around edges to atleast 25mm (Twenty five millimetres) in depth and removal of loose material, trimming of sides, cleaning of surface and making good by providing tack coat with emulsion bitumen @ 0.300kg/sqm (Zero point three zero zero kilogramme per square metre) and then providing 20mm (Twenty millimetres) thick premix carpet using VG-10 bitumen @1.46kg/sqm (One point four six kilogramme per square metre) and seal coat type-B with VG-10 bitumen @0.68kg/sqm (Zero point six eight kilogramme per square metre) as per MORT&H technical specification including entire carriage of material with in all leads, lifts and as per direction by Engineer-in-Charge including other incidentals. The rates are inclusive octroi , royality , Malkana, toll tax or other taxes imposed by the Government exclusive GST.
The maintenance of drains include erosion, repair, clearing, cleaning, reshaping, regarding, deepening of side drains as well as catch water drains as per MORT&H technical specification Clause 3000 including entire carriage of material with in all leads, lifts and as per direction by Engineer-in-Charge including other incidentals. The rates are inclusive octroi , royality , Malkana, toll tax or other taxes imposed by the Government exclusive GST.
Cutting of branches of trees, shurbs from the roadway or with right of way including disposal of wood and leaves to suitable location as per approved drawing and MORT&H technical specifications Clause 201 including entire carriage of material within all leads , lifts and other incidentals. The rates are inclusive octroi , royality , Malkana, toll tax or other taxes imposed by the Government exclusive GST.
Trimming of grass and weeds from the shoulders/berms and dispsing off the same to suitable locations as per approved drawing and MORT&H technical specifications Clause 201 including entire carriage of material within all leads , lifts and other incidentals. The rates are inclusive octroi , royality , Malkana, toll tax or other taxes imposed by the Government exclusive GST.
Routine maintenance for five years after completion of construction work as per item and condition of bid document of contract to general condtion of contract and technical specification of MORT&H including haulage carriage of all labour transport and material to various location of site through all modes of transportations with in all leads lifts and other incidentals to entire satisfaction of Engineer-In-Charge. The rates are inclusive octroi , royality , Malkana, toll tax or other taxes imposed by the Government exclusive GST.
1. Maintenace cost for 1st year = km 9.000 Rate = 218000 Total amont = 1962000
2. Maintenace cost for 1st year = km 9.000 Rate = 228000 Total amont = 2052000
3. Maintenace cost for 1st year = km 9.000 Rate = 240000 Total amont = 2160000
4. Maintenace cost for 1st year = km 9.000 Rate = 252000 Total amont = 2268000
5. Maintenace cost for 1st year = km 9.000 Rate = 264000 Total amont = 2376000 G Total: 10818000
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.75 MB
Kohli.pdf
Tender Documents • 9.30 MB
BOQ_186923.xls
BOQ • 0.33 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .